IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Currently we're using the same poll interval value for both
COMMs protocol(for sending a command and waits for an ACK)
and the device CPU boot phases status waits.
On COMMs protocol this interval should be much lower than the
device CPU boot which may take long time to change status.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
find_get_pid() isn't good in case the user process was run inside
docker.
As a result, we didn't had the PID and we couldn't kill the user
process in case the device got stuck and we needed to reset the
device.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch let the user decide whether the translations done in the
page tables will be fetched directly to the STLB right after the map.
We want to let the user control whether to perform prefetch upon map
operation.
To do so a memory flag was added, to be used in the MAP ioctl, called
HL_MEM_PREFETCH and if set- the mappings will be fetched directly to
the STLB after map operation.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Even if an IOMMU might be present for some PCI segment in the system,
that doesn't necessarily mean it provides translation for the device
we care about. Replace iommu_present() with a more appropriate check.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The habanalabs HW requires memory resources to be used by its
internal hardware structures. These structures are allocated and
initialized by the driver. We would like to use the device HBM for
that purpose. This memory is io-remapped and accessed using the
writel()/writeb()/writew() commands.
Since some of the HW structures are one byte in size we need to
add support for the writeb() and readb() functions in the driver.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of using for_each_sg when iterating sgt that contains dma
entries, use the more proper for_each_sgtable_dma_sg macro.
In addition, both Goya and Gaudi have the exact same implementation
of the asic function that encapsulate the usage of this macro, so
it is better to move that implementation to the common code.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use standard kernel macro to take lower 32 bits of 64-bits variable.
Signed-off-by: Rajaravi Krishna Katta <rkatta@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Take advantage of the HOPs shift/masks now defined as arrays.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As user interrupts are a common use case, this dump pollutes the
dmesg log, hence removing it.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only a hard-reset is an unexpected event which should be notify in
the kernel log. Other resets are normal operations and therefore
we should not pollute the log with them.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently we have two reset prints per reset. One is in the common
code and one in each asic-specific file.
We can change the asic-specific message to be debug only as we can
know the type of reset being done according to the print in the
common code, which is also easier to maintain.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Halting compute engines is a print that doesn't add us any information
because it is always done in the reset process and not used elsewhere.
Even if it was, we don't use prints to mark functions we passed
through.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During the unified memory manager release, a wrong id was used to remove
an entry from the idr.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The debugfs memory access now uses the callback 'access_dev_mem'
so there is no use of the callbacks
'debugfs_{read32,read64,write32,write6}'. Remove them.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When accessing the configuration registers through debugfs,
it is only allowed to access aligned address.
Fail if address is not aligned.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently each asic version implements 4 callbacks:
'debugfs_{read32/write32/read64/write64}'
There is a lot of code duplication among the different
callbacks of all asic versions.
This patch unify the code in order to avoid the code
duplication by iterating the pci_mem_region array
in hl_device and use its fields instead of macros.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a preparation for unifying the code of accessing device memory
through debugfs. Add struct fields and callbacks that will later
be used in debugfs code and will reduce code duplication
among the different read{32,64}/write{32,64} callbacks of
every asic.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/misc/habanalabs/common/memory.c:2137:28: warning: symbol 'hl_ts_behavior' was not declared. Should it be static?
Fixes: 4d530e7d12 ("habanalabs: convert ts to use unified memory manager")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When Gaudi device is secured the monitors data in the configuration
space is blocked from PCI access.
As we need to enable user to get sync-manager monitors registers when
debugging, this patch adds a debugfs that dumps the information to a
binary file (blob).
When a root user will trigger the dump, the driver will send request to
the f/w to fill a data structure containing dump of all monitors
registers.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The out of memory message is rephrased to more subtle expression as out
of memory may be caused by the user in case of, for example, greedy
allocation.
In addition the user is also being notified by an error code.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We currently allow accessing the whole SRAM bar size with
the macro SRAM_BAR_SIZE, but the actual size of the sram
region is the macro SRAM_SIZE which is only a portion of
the whole bar size. So when accessing the sram through
debugfs, use the macro SRAM_SIZE for the sram size
which is the correct macro.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the introduction of the unified memory manager infrastructure, the
timestamp buffers can be converted to use it.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a part of overall refactoring attempt to separate nic and the
core drivers.
Currently, there are 4 different flows, that contain very similar code.
These are the ts, nic, hwblocks and cb alloc/map flows. The similar
aspect of all these flows is that they all contain a central store, with
memory buffers inside, supporting the following set of operations:
- Allocate buffer and return handle
- Get buffer from the store with handle
- Put the buffer (last put releases the buffer)
- Map the buffer to the user
This patch contains a generic data structure used to implement the above
memory buffer store interface. Conversion of the existing code to use
the new data structure will follow.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need this property for doing backward compatibility hacks against
the f/w.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean [1].
This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The required DMA mask is no longer based on input from the F/W, but it
is fixed per ASIC according to its address space.
As such, the per-ASIC function to get this value can be replaced with a
property variable.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When parsing firmware versions strings, driver should not
assume a specific length and parse up to the maximum supported
version length.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The default max power is deduced from the card type value in the CPU-CP
info. This value is then set in the max power variable of the device
structure.
Getting the CPU-CP info is done as part of the late init phase
which is called also during reset. This means that a max power value
which is modified via sysfs will be reset during hard reset back to the
default value.
As the max power is updated in any case during device init in
hl_sysfs_init(), this setting in late init can be removed, and the
overriding during reset is thus avoided.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to allow user to have larger amount of submissions, we
increase the DMA and NIC queue depth to 4K.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order for the user to know if he can try and open device, we
expose the compute ctx state. The user can now know if the context
is used by another process or whether the device is still ongoing
through cleanup or reset and will be available soon.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to be more informative during device open, we are adding a
new return code -EAGAIN that indicates device is still going through
resource reclaiming and hence it cannot be used yet.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Future devices will support multiple device memory page sizes.
In addition, an API for the user was added for it to be able to control
the device memory allocation page size.
This patch is a complementary patch to inform the user of the available
page size supported by the device.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to hold each MMU mask/shift as a denoted structure
member (e.g. hop0_mask).
Instead converting it to array will result in smaller and more readable
code.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch breaks the cumbersome implementation of "get real page size"
along with it's multiple inner conditions and implement each case
(according to the real complexity) inside an ASIC function.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using the device memory allocation API the user ought to know what
is the default allocation page size.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looking forward we will need to report to the user what is the default
page size used.
This will be done more conveniently by explicitly updating the property
rather than to rely on a "0 meaning default" value.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 6646b95aab.
Stephen reports that it breaks the build for him so revert it for now.
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20220520194637.03824f7f@canb.auug.org.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
speakupmap.h was not actually intended to be source code, speakupmap.map
is.
This resurrects the makemapdata.c and genmap.c tools to generate
speakupmap.h automatically from the input and speakup headers, and the
speakupmap.map keyboard mapping source file.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20220515230358.ikwt2kspiwvv5cf4@begin
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As per the current implementation only single callback data gets saved per
event, driver is throwing an error if try to register multiple callback for
same event. So at time of unregistration of any event required things are
event details and callback handler as parameter of xlnx_unregister_event().
As part of adding support of multiple callbacks for same event also require
change in prototype of xlnx_unregister_event().
During unregistration of any events, now required things are event details,
callback handler and agent's private data as parameter of
xlnx_unregister_event().
Also modify the usage of xlnx_unregister_event() in xilinx/zynqmp_power.c
driver as per new implementation.
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Link: https://lore.kernel.org/r/20220427074803.19009-3-abhyuday.godhasara@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As per the current implementation of only single callback data gets
saved per event, driver is throwing an error if try to register multiple
callback for same event.
Add support of multiple callbacks data for same event. So agent can
register for same event with multiple callbacks. Here event management
driver will store the callbacks as list in Hash table entry for that event.
Here each callback data contain 2 element as callback handler and private
data of agent driver.
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Link: https://lore.kernel.org/r/20220427074803.19009-2-abhyuday.godhasara@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is another instance of incorrect use of list iterator and
checking it for NULL.
The list iterator value 'map' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty (in this case, the
check 'if (!map) {' will always be false and never exit as expected).
To fix the bug, use a new variable 'iter' as the list iterator,
while use the original variable 'map' as a dedicated pointer to
point to the found element.
Without this patch, Kernel crashes with below trace:
Unable to handle kernel access to user memory outside uaccess routines
at virtual address 0000ffff7fb03750
...
Call trace:
fastrpc_map_create+0x70/0x290 [fastrpc]
fastrpc_req_mem_map+0xf0/0x2dc [fastrpc]
fastrpc_device_ioctl+0x138/0xc60 [fastrpc]
__arm64_sys_ioctl+0xa8/0xec
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0xd4/0xfc
do_el0_svc+0x28/0x90
el0_svc+0x3c/0x130
el0t_64_sync_handler+0xa4/0x130
el0t_64_sync+0x18c/0x190
Code: 14000016 f94000a5 eb05029f 54000260 (b94018a6)
---[ end trace 0000000000000000 ]---
Fixes: 5c1b97c7d7 ("misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP")
Cc: stable@vger.kernel.org
Reported-by: Jan Jablonsky <jjablonsky@snapchat.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220518152353.13058-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
alcor_pci doesn't set driver data to NULL and clear pci master when
probe fails. Doesn't clear pci master from remove interface. Clearing
pci master is necessary to disable bus mastering and prevent DMAs after
driver removal.
Fix alcor_pci_probe() to set driver data to NULL and clear pci master
from its error path. Fix alcor_pci_remove() to clear pci master.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220517203630.45232-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We can get "failed to disable" clock_unprepare warnings on unbind at least
for the serial console device if the unbind is done before the device has
been idled.
As some devices are using deferred idle, we must check the status for
pending idle work to idle the device.
Fixes: 76f0f772e4 ("bus: ti-sysc: Improve handling for no-reset-on-init and no-idle-on-init")
Cc: Romain Naour <romain.naour@smile.fr>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220512053021.61650-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Fix this issue by calling kobject_put().
Fixes: 948af1f0bb ("firmware: Basic dmi-sysfs support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220511071421.9769-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
