IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We can make timer_get_irq() static as noted by Janusz. It is only used by
omap_rproc_get_timer_irq() via platform data.
Reported-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221028103604.40385-1-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
We can now get a warning for 'omap_timer_match' defined but not used.
Let's fix this by dropping of_match_ptr for omap_timer_match.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: ab0bbef3ae ("clocksource/drivers/timer-ti-dm: Make timer selectable for ARCH_K3")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221028103526.40319-1-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
The TVAL register is 32 bit signed. Thus only the lower 31 bits are
available to specify when an interrupt is to occur at some time in the
near future. Attempting to specify a larger interval with TVAL results
in a negative time delta which means the timer fires immediately upon
being programmed, rather than firing at that expected future time.
The solution is for Linux to declare that TVAL is a 31 bit register rather
than give its true size of 32 bits. This prevents Linux from programming
TVAL with a too-large value. Note that, prior to 5.16, this little trick
was the standard way to handle TVAL in Linux, so there is nothing new
happening here on that front.
The softlockup detector hides the issue, because it keeps generating
short timer deadlines that are within the scope of the broken timer.
Disable it, and you start using NO_HZ with much longer timer deadlines,
which turns into an interrupt flood:
11: 1124855130 949168462 758009394 76417474 104782230 30210281
310890 1734323687 GICv2 29 Level arch_timer
And "much longer" isn't that long: it takes less than 43s to underflow
TVAL at 50MHz (the frequency of the counter on XGene-1).
Some comments on the v1 version of this patch by Marc Zyngier:
XGene implements CVAL (a 64bit comparator) in terms of TVAL (a countdown
register) instead of the other way around. TVAL being a 32bit register,
the width of the counter should equally be 32. However, TVAL is a
*signed* value, and keeps counting down in the negative range once the
timer fires.
It means that any TVAL value with bit 31 set will fire immediately,
as it cannot be distinguished from an already expired timer. Reducing
the timer range back to a paltry 31 bits papers over the issue.
Another problem cannot be fixed though, which is that the timer interrupt
*must* be handled within the negative countdown period, or the interrupt
will be lost (TVAL will rollover to a positive value, indicative of a
new timer deadline).
Cc: stable@vger.kernel.org # 5.16+
Fixes: 012f188504 ("clocksource/drivers/arm_arch_timer: Work around broken CVAL implementations")
Signed-off-by: Joe Korty <joe.korty@concurrent-rt.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
[maz: revamped the commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221024165422.GA51107@zipoli.concurrent-rt.com
Link: https://lore.kernel.org/r/20221121145343.896018-1-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
In the WPCM450 SoC, the clocks for each timer can be gated individually.
To prevent the timer 1 clock from being gated, enable it explicitly.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20221104161850.2889894-3-j.neuschaefer@gmx.net
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Commit ca7b72b5a5 ("clocksource: Add driver for the Ingenic JZ47xx OST")
adds the struct platform_driver ingenic_ost_driver, with the definition of
pm functions under the non-existing config PM_SUSPEND, which means the
intended pm functions were never actually included in any build.
As the only callbacks are .suspend_noirq and .resume_noirq, we can assume
that it is intended to be CONFIG_PM_SLEEP.
Since commit 1a3c7bb088 ("PM: core: Add new *_PM_OPS macros, deprecate
old ones"), the default pattern for platform_driver definitions
conditional for CONFIG_PM_SLEEP is to use pm_sleep_ptr().
As __maybe_unused annotations on the dev_pm_ops structure and its callbacks
are not needed anymore, remove these as well.
Suggested-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20221123083159.22821-1-lukas.bulwahn@gmail.com
Documentation for most CMTs say that it takes two input clocks before
changes propagate to the timer. This is especially relevant when the timer
is stopped to change further settings.
Implement the delays according to the spec. To avoid unnecessary delays in
atomic mode, also check if the to-be-written value actually differs.
CMCNT is a bit special because testing showed that it requires 3 cycles to
propagate, which affects all CMTs. Also, the WRFLAG needs to be checked
before writing. This fixes "cannot clear CMCNT" messages which occur often
on R-Car Gen4 SoCs, but only very rarely on older SoCs for some reason.
Fixes: 81b3b27110 ("clocksource: sh_cmt: Add support for multiple channels per device")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130210609.7718-1-wsa+renesas@sang-engineering.com
- No core code changes
- No new clocksource/event driver
- Cleanup of the TI DM clocksource/event driver
- The usual set of device tree binding updates
- Small improvement, fixes and cleanups all over the place
-----BEGIN PGP SIGNATURE-----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=n458
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2022-10-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A boring time, timekeeping, timers update:
- No core code changes
- No new clocksource/event driver
- Cleanup of the TI DM clocksource/event driver
- The usual set of device tree binding updates
- Small improvement, fixes and cleanups all over the place"
* tag 'timers-core-2022-10-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
clocksource/drivers/arm_arch_timer: Fix CNTPCT_LO and CNTVCT_LO value
clocksource/drivers/imx-sysctr: handle nxp,no-divider property
dt-bindings: timer: nxp,sysctr-timer: add nxp,no-divider property
clocksource/drivers/timer-ti-dm: Get clock in probe with devm_clk_get()
clocksource/drivers/timer-ti-dm: Add flag to detect omap1
clocksource/drivers/timer-ti-dm: Move struct omap_dm_timer fields to driver
clocksource/drivers/timer-ti-dm: Use runtime PM directly and check errors
clocksource/drivers/timer-ti-dm: Move private defines to the driver
clocksource/drivers/timer-ti-dm: Simplify register access further
clocksource/drivers/timer-ti-dm: Simplify register writes with dmtimer_write()
clocksource/drivers/timer-ti-dm: Simplify register reads with dmtimer_read()
clocksource/drivers/timer-ti-dm: Drop unused functions
clocksource/drivers/timer-gxp: Add missing error handling in gxp_timer_probe
clocksource/drivers/arm_arch_timer: Fix handling of ARM erratum 858921
clocksource/drivers/exynos_mct: Enable building on ARTPEC
clocksource/drivers/exynos_mct: Support local-timers property
clocksource/drivers/exynos_mct: Support frc-shared property
dt-bindings: timer: exynos4210-mct: Add ARTPEC-8 MCT support
clocksource/drivers/sun4i: Add definition of clear interrupt
clocksource/drivers/renesas-ostm: Add support for RZ/V2L SoC
...
CNTPCT_LO and CNTVCT_LO are defined by mistake in commit '8b82c4f883a7',
so fix them according to the Arm ARM DDI 0487I.a, Table I2-4
"CNTBaseN memory map" as follows:
Offset Register Type Description
0x000 CNTPCT[31:0] RO Physical Count register.
0x004 CNTPCT[63:32] RO
0x008 CNTVCT[31:0] RO Virtual Count register.
0x00C CNTVCT[63:32] RO
Fixes: 8b82c4f883 ("clocksource/drivers/arm_arch_timer: Move MMIO timer programming over to CVAL")
Cc: stable@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Yang Guo <guoyang2@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/20220927033221.49589-1-zhangshaokun@hisilicon.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The previous hardware design embedds a internal divider for base clock.
New design not has that divider, so check the nxp,no-divider property,
if true, directly use base clock input, otherwise divide by 3 as before.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220902111207.2902493-3-peng.fan@oss.nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
We can simplify the code a bit by getting the clock in probe, and using
devm_clk_get(). This will also make further changes easier as the clock
is available in probe instead of prepare.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-10-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Let's make it clear that some features need to be tested currently on
omap1. Only omap1 still uses platform_data.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-9-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
There is no longer any need to expose the elements of struct omap_dm_timer
outside the driver. The pwm and remoteproc drivers just use struct
omap_dm_timer as a cookie.
Let's move the elements of struct omap_dm_timer into struct dmtimer that
is private to the driver. To do this, we mostly rename omap_dm_timer to
dmtimer in the driver. We keep omap_dm_timer only for the exposed
functions in the platform_data for the pwm and remoteproc drivers.
Let's also add a note about not using the exposed functions internally as
those will get deprecated eventually in favor of Linux generic frameworks.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-8-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Use pm_runtime_resume_and_get() and check for a possible error returned.
We want to do this as omap_dm_timer_enable() and omap_dm_timer_disable()
are exposed to the pwm and remoteproc drivers, and in the following patch
we turn struct omap_dm_timer into a cookie used by the exposed functions
only.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-7-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
These defines are only used by timer-ti-dm driver.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-6-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Let's unify register access and use dmtimer_read() and dmtimer_write()
also for the timer revision specific registers like we now do for the
shread registers.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-5-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
We can simplify register write access by checking for the register write
posted mode in the write function. This way we can combine the functions
for __omap_dm_timer_write() and omap_dm_timer_write_reg() into a single
function dmtimer_write().
We update the shared register access first, the timer revision specific
register access will be updated in a later patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-4-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
We can simplify register read access by checking for the register write
posted mode in the read function. This way we can combine the functions
for __omap_dm_timer_read() and omap_dm_timer_read_reg() into a single
function dmtimer_read().
We update the shared register access first, the timer revision specific
register access will be updated in a later patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-3-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
We still have some unused functions left, let's drop them.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-2-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add platform_device_put() to make sure to free the platform
device in the event platform_device_add() fails.
Fixes: 5184f4bf15 ("clocksource/drivers/timer-gxp: Add HPE GXP Timer")
Signed-off-by: Lin Yujun <linyujun809@huawei.com>
Link: https://lore.kernel.org/r/20220914033018.97484-1-linyujun809@huawei.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The commit a38b71b083 ("clocksource/drivers/arm_arch_timer:
Move system register timer programming over to CVAL") moves the
programming of the timers from the countdown timer (TVAL) over
to the comparator (CVAL). This makes it necessary to read the
counter when programming next event. However, the workaround of
Cortex-A73 erratum 858921 does not set the corresponding
set_next_event_phys and set_next_event_virt.
Add the appropriate hooks to apply the erratum mitigation when
programming the next timer event.
Fixes: a38b71b083 ("clocksource/drivers/arm_arch_timer: Move system register timer programming over to CVAL")
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20220914061424.1260-1-jiangkunkun@huawei.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
This timer block is used on ARTPEC-8.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220609112738.359385-5-vincent.whitchurch@axis.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
If the device tree indicates that the hardware requires that the
processor only use certain local timers, respect that.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220609112738.359385-4-vincent.whitchurch@axis.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
When the FRC is shared with another main processor, the other processor
is assumed to have started it and this processor should not write to the
global registers.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220609112738.359385-3-vincent.whitchurch@axis.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
To prevent misunderstanding, use TIMER_IRQ_CLEAR instead of TIMER_IRQ_EN
in function sun4i_timer_clear_interrupt.
Signed-off-by: Victor Hassan <victor@allwinnertech.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220906052056.43404-1-victor@allwinnertech.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The OSTM block is identical on Renesas RZ/G2L and RZ/V2L SoC's, so instead
of adding dependency for each SoC's add dependency on ARCH_RZG2L. The
ARCH_RZG2L config option is already selected by ARCH_R9A07G044 and
ARCH_R9A07G054.
With the above change OSTM will be enabled on RZ/V2L SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220907080056.3460-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
This series implements Sstc extension support which was ratified
recently. Before the Sstc extension, an SBI call is necessary to
generate timer interrupts as only M-mode have access to the timecompare
registers. Thus, there is significant latency to generate timer
interrupts at kernel. For virtualized enviornments, its even worse as
the KVM handles the SBI call and uses a software timer to emulate the
timecomapre register.
Sstc extension solves both these problems by defining a
stimecmp/vstimecmp at supervisor (host/guest) level. It allows kernel to
program a timer and recieve interrupt without supervisor execution
enviornment (M-mode/HS mode) intervention.
* palmer/riscv-sstc:
RISC-V: Prefer sstc extension if available
RISC-V: Enable sstc extension parsing from DT
RISC-V: Add SSTC extension CSR details
RISC-V ISA has sstc extension which allows updating the next clock event
via a CSR (stimecmp) instead of an SBI call. This should happen dynamically
if sstc extension is available. Otherwise, it will fallback to SBI call
to maintain backward compatibility.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20220722165047.519994-4-atishp@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* Enabling the FPU is now a static_key.
* Improvements to the Svpbmt support.
* CPU topology bindings for a handful of systems.
* Support for systems with 64-bit hart IDs.
* Many settings have been enabled in the defconfig, including both
support for the StarFive systems and many of the Docker requirements.
There are also a handful of cleanups and improvements, like usual.
-----BEGIN PGP SIGNATURE-----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=v9hn
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Enabling the FPU is now a static_key
- Improvements to the Svpbmt support
- CPU topology bindings for a handful of systems
- Support for systems with 64-bit hart IDs
- Many settings have been enabled in the defconfig, including both
support for the StarFive systems and many of the Docker requirements
There are also a handful of cleanups and improvements, as usual.
* tag 'riscv-for-linus-5.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (28 commits)
riscv: enable Docker requirements in defconfig
riscv: convert the t-head pbmt errata to use the __nops macro
riscv: introduce nops and __nops macros for NOP sequences
RISC-V: Add fast call path of crash_kexec()
riscv: mmap with PROT_WRITE but no PROT_READ is invalid
riscv/efi_stub: Add 64bit boot-hartid support on RV64
riscv: cpu: Add 64bit hartid support on RV64
riscv: smp: Add 64bit hartid support on RV64
riscv: spinwait: Fix hartid variable type
riscv: cpu_ops_sbi: Add 64bit hartid support on RV64
riscv: dts: sifive: "fix" pmic watchdog node name
riscv: dts: canaan: Add k210 topology information
riscv: dts: sifive: Add fu740 topology information
riscv: dts: sifive: Add fu540 topology information
riscv: dts: starfive: Add JH7100 CPU topology
RISC-V: Add CONFIG_{NON,}PORTABLE
riscv: config: enable SOC_STARFIVE in defconfig
riscv: dts: microchip: Add mpfs' topology information
riscv: Kconfig.socs: Add comments
riscv: Kconfig.erratas: Add comments
...
Walleij)
- Fix grammar typo in the ARM global timer Kconfig option (Randy
Dunlap)
- Add the tegra186 timer and use it on the tegra234 board (Thierry
Reding)
- Add the 'CPUXGPT' CPU timer for Mediatek MT6795 and implement a
workaround to overcome an ATF bug where the timer is not correctly
initialized (AngeloGioacchino Del Regno)
- Rework the suspend/resume approach to enable the feature on the
timer even it is not an active clock and fix a compilation warning
(Claudiu Beznea)
- Add the Add R-Car Gen4 timer support along with the DT bindings
(Wolfram Sang)
- Add compatible for ti,am654-timer to support AM6 SoC (Tony Lindgren)
- Fix Kconfig option to put it back to 'bool' instead of 'tristate'
for the tegra186 (Daniel Lezcano)
- Sort 'family,type' DT bindings for the Renesas timers (Geert
Uytterhoeven)
- Add compatible 'allwinner,sun20i-d1-timer' for Allwinner D1 (Samuel
Holland)
- Remove unnecessary (void*) conversions for sun4i (XU pengfei)
- Remove unnecessary (void*) conversions for sun5i (Li zeming)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmLhWF0ACgkQqDIjiipP
6E+ziAgArY8BJ/09w4rt63LDO5nynorr0+Uuf0E9hCmc0KzRsSF3hO39EcuLj1zD
ubKKSXwaOucAcRYj7gCeqaSk/IOs9EmwESRVtLLIwEwYsg44iC1vmq4pJ8cX66qN
h5TqkOiq77fPIY3BR/nSFxddmlU2farO8oSUqdLNsVrqoIq2rttaQYADdYGa4LYn
dvQHEmh6jvJRoZM3aR6It0EWM7pyHKxAWFChWv+SbikheDCgIcugz+FUTy9lyhmf
39wLm2srmrCLbjaGdJnyc38/y/UPIJ0aqeSf7XSiHTWQ+dfNBfdbrmPTSJHiyIt+
iPrlx0ShvrMXeOxgbSxse53e+9Q88w==
=ApcN
-----END PGP SIGNATURE-----
Merge tag 'timers-v5.20-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clockevent/source updates from Daniel Lezcano:
- Add the missing DT bindings for the MTU nomadik timer (Linus
Walleij)
- Fix grammar typo in the ARM global timer Kconfig option (Randy
Dunlap)
- Add the tegra186 timer and use it on the tegra234 board (Thierry
Reding)
- Add the 'CPUXGPT' CPU timer for Mediatek MT6795 and implement a
workaround to overcome an ATF bug where the timer is not correctly
initialized (AngeloGioacchino Del Regno)
- Rework the suspend/resume approach to enable the feature on the
timer even it is not an active clock and fix a compilation warning
(Claudiu Beznea)
- Add the Add R-Car Gen4 timer support along with the DT bindings
(Wolfram Sang)
- Add compatible for ti,am654-timer to support AM6 SoC (Tony Lindgren)
- Fix Kconfig option to put it back to 'bool' instead of 'tristate'
for the tegra186 (Daniel Lezcano)
- Sort 'family,type' DT bindings for the Renesas timers (Geert
Uytterhoeven)
- Add compatible 'allwinner,sun20i-d1-timer' for Allwinner D1 (Samuel
Holland)
- Remove unnecessary (void*) conversions for sun4i (XU pengfei)
- Remove unnecessary (void*) conversions for sun5i (Li zeming)
Link: https://lore.kernel.org/all/7472984e-f502-5f27-82bf-070127dd85a5@linaro.org
The clocksources are built-in, they are not modules. We don't know if
the core time framework is ready for clockevents / clocksources as
modules.
Revert back this option to 'bool'.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20220718213657.1303538-1-daniel.lezcano@linaro.org
The clocksource drivers do not currently have loadable modules as
pointed out by Daniel Lezcano <daniel.lezcano@linaro.org>.
Let's reconsider this later on once timer removal discussion has been
done, and set timer-ti-dm to bool for TI K3 SoC.
Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220523151448.23732-1-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add compatible for ti,am654-timer to support the timers. For example, am654
has four timers in the MCU domain and 12 timers in the MAIN domain.
Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220408101715.43697-4-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Let's make timer-ti-dm selectable for ARCH_K3, and add a separate option
for OMAP_DM_SYSTIMER as there should be no need for it on ARCH_K3.
For older TI SoCs, we are already selecting OMAP_DM_TIMER in
arch/arm/mach-omap*/Kconfig. For mach-omap2, we need to now also select
OMAP_DM_SYSTIMER.
Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220408101715.43697-3-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The __omap_dm_timer_* inline functions in the header are no longer needed
outside the driver, and the header ifdefs prevent the driver working for
ARCH_K3.
Let's move the inline functions to the driver and drop the ifdefs and
drop the unused functions __omap_dm_timer_override_errata() and
__omap_dm_timer_load_start().
Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220408101715.43697-2-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The hartid can be a 64bit value on RV64 platforms.
Add support for 64bit hartid in riscv_of_processor_hartid() and
update its callers.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20220527051743.2829940-5-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Fix the following compilation warnings:
timer-microchip-pit64b.c:68: warning: cannot understand function prototype: 'struct mchp_pit64b_clkevt '
timer-microchip-pit64b.c:82: warning: cannot understand function prototype: 'struct mchp_pit64b_clksrc '
timer-microchip-pit64b.c:283: warning: Function parameter or member 'timer' not described in 'mchp_pit64b_init_mode'
timer-microchip-pit64b.c:283: warning: Function parameter or member 'max_rate' not described in 'mchp_pit64b_init_mode'
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220609094041.1796372-4-claudiu.beznea@microchip.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Use mchp_pit64b_suspend() and mchp_pit64b_resume() to disable or
enable timers clocks on init and remove specific
clk_prepare_{disable, enable} calls. This is ok also for clockevent timer
as proper clock enable, disable is done on .set_state_oneshot,
.set_state_periodic, .set_state_shutdown calls.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220609094041.1796372-3-claudiu.beznea@microchip.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Remove suspend and resume ops for clockevent and add set_state_oneshot()
instead. Along with this mchp_pit64b_{suspend, resume}() were called on
proper function to disable/enable clocks. This will allow disabling clocks
for clockevent in case it is not selected as active clockevent.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220609094041.1796372-2-claudiu.beznea@microchip.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Some MediaTek platforms with a buggy TrustZone ATF firmware will not
initialize the AArch64 System Timer correctly: in these cases, the
System Timer address is correctly programmed, as well as the CNTFRQ_EL0
register (reading 13MHz, as it should be), but the assigned hardware
timers are never started before (or after) booting Linux.
In this condition, any call to function get_cycles() will be returning
zero, as CNTVCT_EL0 will always read zero.
One common critical symptom of that is trying to use the udelay()
function (calling __delay()), which executes the following loop:
start = get_cycles();
while ((get_cycles() - start) < cycles)
cpu_relax();
which, when CNTVCT_EL0 always reads zero, translates to:
while((0 - 0) < 0) ==> while(0 < 0)
... generating an infinite loop, even though zero is never less
than zero, but always equal to it (this has to be researched,
but it's out of the scope of this commit).
To fix this issue on the affected MediaTek platforms, the solution
is to simply start the timers that are designed to be System Timer(s).
These timers, downstream, are called "CPUXGPT" and there is one
timer per CPU core; luckily, it is not necessary to set a start bit
on each CPUX General Purpose Timer, but it's conveniently enough to:
- Set the clock divider (input = 26MHz, divider = 2, output = 13MHz);
- Set the ENABLE bit on a global register (starts all CPUX timers).
The only small hurdle with this setup is that it's all done through
the MCUSYS wrapper, where it is needed, for each read or write, to
select a register address (by writing it to an index register) and
then to perform any R/W on a "CON" register.
For example, writing "0x1" to the CPUXGPT register offset 0x4:
- Write 0x4 to mcusys INDEX register
- Write 0x1 to mcusys CON register
Reading from CPUXGPT register offset 0x4:
- Write 0x4 to mcusys INDEX register
- Read mcusys CON register.
Finally, starting this timer makes platforms affected by this issue
to work correctly.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220613133819.35318-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The timer IP block present on Tegra234 SoC supports watchdog timer
functionality that can be used to recover from system hangs. The
watchdog timer uses a timer in the background for countdown.
Signed-off-by: Kartik <kkartik@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/1656922422-25823-4-git-send-email-kkartik@nvidia.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Currently this only supports a single watchdog, which uses a timer in
the background for countdown. Eventually the timers could be used for
various time-keeping tasks, but by default the architected timer will
already provide that functionality.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kartik <kkartik@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/1656922422-25823-3-git-send-email-kkartik@nvidia.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Use the possessive "its" instead of the contraction "it's"
where appropriate.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220715015852.12523-1-rdunlap@infradead.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.
modpost used to detect it, but it has been broken for a decade.
Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.
There are two ways to fix it:
- Remove __init
- Remove EXPORT_SYMBOL
I chose the latter for this case because the only in-tree call-site,
arch/x86/kernel/cpu/mshyperv.c is never compiled as modular.
(CONFIG_HYPERVISOR_GUEST is boolean)
Fixes: dd2cb34861 ("clocksource/drivers: Continue making Hyper-V clocksource ISA agnostic")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220606050238.4162200-1-masahiroy@kernel.org
Signed-off-by: Wei Liu <wei.liu@kernel.org>
- Device tree bindings for MT8186
- Tell the kernel that the RISC-V SBI timer stops in deeper power states
- Make device tree parsing in sp804 more robust
- Dead code removal and tiny fixes here and there
- Add the missing SPDX identifiers
-----BEGIN PGP SIGNATURE-----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=fIlH
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clockevent/clocksource updates from Thomas Gleixner:
- Device tree bindings for MT8186
- Tell the kernel that the RISC-V SBI timer stops in deeper power
states
- Make device tree parsing in sp804 more robust
- Dead code removal and tiny fixes here and there
- Add the missing SPDX identifiers
* tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value
clocksource/drivers/timer-ti-dm: Remove unnecessary NULL check
clocksource/drivers/timer-sun5i: Convert to SPDX identifier
clocksource/drivers/timer-sun4i: Convert to SPDX identifier
clocksource/drivers/pistachio: Convert to SPDX identifier
clocksource/drivers/orion: Convert to SPDX identifier
clocksource/drivers/lpc32xx: Convert to SPDX identifier
clocksource/drivers/digicolor: Convert to SPDX identifier
clocksource/drivers/armada-370-xp: Convert to SPDX identifier
clocksource/drivers/mips-gic-timer: Convert to SPDX identifier
clocksource/drivers/jcore: Convert to SPDX identifier
clocksource/drivers/bcm_kona: Convert to SPDX identifier
clocksource/drivers/sp804: Avoid error on multiple instances
clocksource/drivers/riscv: Events are stopped during CPU suspend
clocksource/drivers/ixp4xx: Drop boardfile probe path
dt-bindings: timer: Add compatible for Mediatek MT8186
Patch series from Nick Hawkins:
"The GXP is the HPE BMC SoC that is used in the majority of HPE current
generation servers. Traditionally the asic will last multiple
generations of server before being replaced.
Info about SoC:
HPE GXP is the name of the HPE Soc. This SoC is used to implement many
BMC features at HPE. It supports ARMv7 architecture based on the Cortex
A9 core. It is capable of using an AXI bus to which a memory controller
is attached. It has multiple SPI interfaces to connect boot flash and
BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It has
multiple i2c engines to drive connectivity with a host infrastructure.
The initial patches enable the watchdog and timer enabling the host to
be able to boot."
* hpe/gxp-soc:
MAINTAINERS: Introduce HPE GXP Architecture
ARM: dts: Introduce HPE GXP Device tree
dt-bindings: arm: hpe: add GXP Support
dt-bindings: timer: hpe,gxp-timer: Add HPE GXP Timer and Watchdog
clocksource/drivers/timer-gxp: Add HPE GXP Timer
watchdog: hpe-wdt: Introduce HPE GXP Watchdog
ARM: configs: multi_v7_defconfig: Add HPE GXP ARCH
ARM: hpe: Introduce the HPE GXP architecture
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
