IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
For Gaudi1 the exported dma-buf is always composed of a single page, and
therefore the exported size is equal to this page's size.
When calling alloc_sgt_from_device_pages(), we pass 0 as the exported
size and internally calculate it as "number of pages * page size".
This makes alloc_sgt_from_device_pages() less clear, because the
exported size parameter is not understood as a restriction on the pages'
size.
Modify to always pass the exported size explicitly.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
After the heartbeat mechanism is now expanded to be used also
for EQ health check, we shouldn't send heartbeat messages
to FW before driver allow events to be received from FW.
Because if the driver will send two heartbeats before it enables
events to be received from FW, then the EQ health check
will fail and reset the device.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This is the second patch for applying the eq health check mechanism
which will add support for the interrupt flow for gaudi2 asic.
More info about the interrupt mechanism:
set a dedicated msix for the eq error interrupt, and add
interrupt handler for it.
when FW detects some issue with EQ like EQ_FULL, it'll
raise that interrupt and driver should reset the device.
Driver will inform the FW which msix index to use through
the already existing handshake mechanism which will
send msix info message to fw.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add mechanism for fw eq health check. this will be done using two flows:
using the heartbeat mechanism and raising a dedicated interrupt to
indicate an eq failure like EQ full.
This patch will add implementation for the eq heartbeat for gaudi2 asic.
More info about the heartbeat mechanism:
Expand the heartbeat mechanism to monitor a new event that
will be sent from FW upon receiving heartbeat message.
that way driver can know that the eq is working or not.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add tsc clock to clock sync info, to enable using this clock for
sampling and sync it with device time.
Signed-off-by: Hen Alon <halon@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Because it is not used and also, for graceful reset to work
those ioctls should run on the compute device.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The CPUCP interface is moved to a shared folder outside of accel as
a pre-requisite to upstream the NIC drivers that will also include
this file.
Signed-off-by: David Meriin <dmeriin@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
During ECC event handling, Memory wrapper id was mistakenly
printed as block id. Fix the print and in addition fetch the actual
block-id from firmware.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
coresight ETF blocks have different size. As a result, sync packets
need to be aligned based on fifo size.
Signed-off-by: Benjamin Dotan <bdotan@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on its destination buffer argument which is
_not_ the case for `strncpy`!
There is likely no bug happening in this case since HL_STR_MAX is
strictly larger than all source strings. Nonetheless, prefer a safer and
more robust interface.
It should also be noted that `strscpy` will not pad like `strncpy`. If
this NUL-padding behavior is _required_ we should use `strscpy_pad`
instead of `strscpy`.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
snprintf() returns the "number of characters which *would* be generated for
the given input", not the size *really* generated.
In order to avoid too large values for 'str_size' (and potential negative
values for "PSOC_RAZWI_ENG_STR_SIZE - str_size") use scnprintf()
instead of snprintf().
Fixes: c0e6df916050 ("accel/habanalabs: fix address decode RAZWI handling")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
We see that `prop->cpucp_info.card_name` is supposed to be
NUL-terminated based on its usage within `__hwmon_device_register()`
(wherein it's called "name"):
| if (name && (!strlen(name) || strpbrk(name, "-* \t\n")))
| dev_warn(dev,
| "hwmon: '%s' is not a valid name attribute, please fix\n",
| name);
A suitable replacement is `strscpy_pad` [2] due to the fact that it
guarantees both NUL-termination and NUL-padding on its destination
buffer.
NUL-padding on `prop->cpucp_info.card_name` is not strictly necessary as
`hdev->prop` is explicitly zero-initialized but should be used
regardless as it gets copied out to userspace directly -- as per Kees'
suggestion.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When config_etr or config_etf are called we need to validate the
parameters that are passed into them to make sure the requested
operation is valid.
Signed-off-by: Benjamin Dotan <bdotan@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Because firmware is blocking PSOC_ARC_DBG, we need to disable access
to this block.
Signed-off-by: Benjamin Dotan <bdotan@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The soft reset has transitioned to CPUCP packet instead of plain
register write and is about to be removed from the struct cpu_dyn_regs.
As a preparation for removing the cpu_rst_status field from
struct cpu_dyn_regs, switch to use the plain macro - this keeps the
backward compatibility.
Signed-off-by: Igor Grinberg <igrinberg@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
To use drm_ioctl(), move the ioctls to the device specific ioctls
range at [DRM_COMMAND_BASE, DRM_COMMAND_END).
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Register the compute device as an accel device, and remove the creation
of the habanalabs compute char device.
The IOCTLs in this patch are still handled by the current driver
handler. Moving to DRM IOCTL handling requires moving the IOCTLs
numbers to a specific range, so it will be handled in subsequent
patches.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
User gets notification for every engine error report, but he still
lacks the exact engine information. Hence, we allow user to query
for the exact engine reported an error.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
After being notified about certain errors, user is expected to finish
his post-errors actions and to release the device within some timeout,
after which is deice is being reset.
The default timeout value is 5 sec, which in some case is not enough for
a user application to collect debug data.
Increase the default value to 30 sec.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
It is possible for FW to request reserved space in dram.
If the device supports this option, it will retrieve the size from the
f/w and will reserve it.
Currently we add the common code infrastructure to support it.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
If we are initializing the kernel context when we have a Gaudi2 device,
we don't need to do any late initializing of that context with
specific Gaudi2 code.
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The soft reset has transitioned to CPUCP packet instead of plain
register write and is about to be removed from the struct cpu_dyn_regs.
As a preparation for removing the gic_host_soft_rst_irq field from
struct cpu_dyn_regs, switch to use the plain macro - this keeps the
backward compatibility.
Signed-off-by: Igor Grinberg <igrinberg@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As TPC kernels now must use those registers we unsecure them.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The F/W dynamically allocates one of the PSOC scratchpad registers for
the engine cores, so they can raise events towards the F/W.
To allow the engine cores to access this register, this register must be
non-secured.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The module loads firmware so add MODULE_FIRMWARE macros to provide that
information via modinfo.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Now that the driver core allows for struct class to be in read-only
memory, move the accel_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: dri-devel@lists.freedesktop.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add dump of an error reported from f/w during boot time.
This error indicates a failure with setting temperature threshold.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
If scrubbing memory after user released device has failed it means
the device is in a bad state and should be reset.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Our simulator supports idle check so no need anymore to check if pdev
exists.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
When the driver needs to abort waiters for interrupts, for cases
such as critical events that occur and driver need to do hard reset,
in such scenario the driver will complete the fence to wake up the
waiting thread, and will set the fence error indication.
The return value of the completion API will be greater than 0
since it will return the timeout, but as this indicates successful
completion, the driver should mark it as aborted.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Protect against concurrency of user requesting to register a timestamp
offset (where the driver fills the timestamp when the command submission
has finished executing) to a specific user interrupt ID. The
protection is basically to allow only one timestamp registration
request to be handled at a time.
This is needed because the user can decide to re-use a timestamp
offset (register an already registered offset, to a different
interrupt ID). This means the request will cause the timestamp node to
move from one interrupt list to another interrupt list. In such
scenario, without proper protection, we could end up adding the same
node twice to the interrupts wait lists.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Every time an FD is returned to the user, the driver adds
a corresponding private structure to the list.
Yet, it's still a list of private structures rather than of FDs.
Remove, as well, an unnecessary comment.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Because we might still be using related resources, decrementing PID's
reference count should be done at later stages of the device release.
A good place is right after the representing private structure is
removed from LKD's list.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As part of driver teardown, we attempt to kill all user processes.
It shouldn't fail, but if it does we want to print the error code that
the kapi returned to us.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The preboot used to statically allocate memory for the comms descriptor
on the device memory when driver requested the descriptor information.
Now preboot moved to dynamic memory allocation where it wants to check
the size the driver expects vs. what the f/w expects.
Note there are no backward compatibility issues as older f/w versions
simply ignore this value.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Because in this case we have only a single possible cause, we can
safely stop fetching the cause from firmware.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
hl_device_status() returns the status of an acquired device.
If a device is going down (following an rmmod cmd),
it should be marked as an unusable/malfunctioning device, and
hence should not be acquired.
However, since this was not the case so far (i.e., a device going
down would inaccurately return 'in reset' status allowing the user
to acquire the device) it introduced a bug where as part of a reset
flow, the driver could not kill processes that have not run yet, and
since those processes aren't blocked from reacquiring a device,
we get eventually a new flow of a driver attempting to kill all
processes in a list that can't be ever really empty.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
It is useful for debug to know which user process have acquired the
device.
Add this info to the relevant debug print, in addition to the already
printed user context's ASID.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When an ioctl fails, it is useful to know what is the task command name
and the full ioctl request code, in addition to the task pid and the
ioctl number.
Add the additional information to the relevant debug error prints.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order for user to be aware of undefined opcode events, we must
store all relevant information and notify user about the failure.
The user will fetch the stored info via info ioctl.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
If hl_device_cond_reset() is called while a reset is already pending but
hasn't started, the reset request will be dropped.
If the flags of the new request are more severe, e.g. a hard reset while
the pending reset is a compute reset, the eventual reset won't be
suitable for the device status.
To prevent such cases, update the pending reset flags with the new
requests flags before the requests are dropped.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When a H/W event is received while a user is registered to events, no
immediate hard reset will happen, and instead the user will be notified
and will have some time to handle it and eventually release the
device, after which the reset will be done.
If a user, as part of the handling and as part of the cleanup steps
towards releasing the device, unregisters from receiving those events,
and at that time an adjacent H/W event is received, it will be assumed
that the user is not registered to events and thus an immediate hard
reset is required.
To prevent such an unwanted immediate reset, modify the driver to
perform it if the user is not registered to events AND we don't already
have a pending reset for a previous H/W event.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
