IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 189ff16722ee36ced4d2a2469d4ab65a8fee4198 ]
Because atalk_ioctl() accesses sk->sk_receive_queue
without holding a sk->sk_receive_queue.lock, it can
cause a race with atalk_recvmsg().
A use-after-free for skb occurs with the following flow.
```
atalk_ioctl() -> skb_peek()
atalk_recvmsg() -> skb_recv_datagram() -> skb_free_datagram()
```
Add sk->sk_receive_queue.lock to atalk_ioctl() to fix this issue.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Link: https://lore.kernel.org/r/20231213041056.GA519680@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e23c0d21ce9234fbc31ece35663ababbb83f9347 ]
Many hardware configurations have the MDIO bus disabled, and are instead
using some other MDIO bus to talk to the MAC's phy.
of_mdiobus_register() returns -ENODEV in this case. Let's handle it
gracefully instead of failing to probe the MAC.
Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20231212-b4-stmmac-handle-mdio-enodev-v2-1-600171acf79f@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 981d947bcd382c3950a593690e0e13d194d65b1c ]
In 10M SGMII mode all the packets are being dropped due to wrong Rx clock.
SGMII 10MBPS mode needs RX clock divider programmed to avoid drops in Rx.
Update configure SGMII function with Rx clk divider programming.
Fixes: 463120c31c58 ("net: stmmac: dwmac-qcom-ethqos: add support for SGMII")
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Sneh Shah <quic_snehshah@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20231212092208.22393-1-quic_snehshah@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f24a49a375f65e8e75ee1b19d806f46dbaae57fd ]
Starting with commit 4e51bf44a03a ("net: bridge: move the switchdev
object replay helpers to "push" mode") the switchdev_bridge_port_offload()
helper was extended with the intention to provide switchdev drivers easy
access to object addition and deletion replays. This works by calling
the replay helpers with non-NULL notifier blocks.
In the same commit, the dpaa2-switch driver was updated so that it
passes valid notifier blocks to the helper. At that moment, no
regression was identified through testing.
In the meantime, the blamed commit changed the behavior in terms of
which ports get hit by the replay. Before this commit, only the initial
port which identified itself as offloaded through
switchdev_bridge_port_offload() got a replay of all port objects and
FDBs. After this, the newly joining port will trigger a replay of
objects on all bridge ports and on the bridge itself.
This behavior leads to errors in dpaa2_switch_port_vlans_add() when a
VLAN gets installed on the same interface multiple times.
The intended mechanism to address this is to pass a non-NULL ctx to the
switchdev_bridge_port_offload() helper and then check it against the
port's private structure. But since the driver does not have any use for
the replayed port objects and FDBs until it gains support for LAG
offload, it's better to fix the issue by reverting the dpaa2-switch
driver to not ask for replay. The pointers will be added back when we
are prepared to ignore replays on unrelated ports.
Fixes: b28d580e2939 ("net: bridge: switchdev: replay all VLAN groups")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20231212164326.2753457-3-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2aad7d4189a923b24efa8ea6ad09059882b1bfe4 ]
The size of the DMA unmap was wrongly put as a sizeof of a pointer.
Change the value of the DMA unmap to be the actual macro used for the
allocation and the DMA map.
Fixes: 1110318d83e8 ("dpaa2-switch: add tc flower hardware offload on ingress traffic")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20231212164326.2753457-2-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60316d7f10b17a7ebb1ead0642fee8710e1560e0 ]
We need to do signed arithmetic if we expect condition
`if (bytes < 0)` to be possible
Found by Linux Verification Center (linuxtesting.org) with SVACE
Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko")
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231211162317.4116625-1-kniv@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 829649443e78d85db0cff0c37cadb28fbb1a5f6f ]
There are some wrong return values check in sign-file when call OpenSSL
API. The ERR() check cond is wrong because of the program only check the
return value is < 0 which ignored the return val is 0. For example:
1. CMS_final() return 1 for success or 0 for failure.
2. i2d_CMS_bio_stream() returns 1 for success or 0 for failure.
3. i2d_TYPEbio() return 1 for success and 0 for failure.
4. BIO_free() return 1 for success and 0 for failure.
Link: https://www.openssl.org/docs/manmaster/man3/
Fixes: e5a2e3c84782 ("scripts/sign-file.c: Add support for signing with a raw signature")
Signed-off-by: Yusong Gao <a869920004@gmail.com>
Reviewed-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20231213024405.624692-1-a869920004@gmail.com/ # v5
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e87d3a1370ce9f04770d789bcf7cce44865d2e8d ]
Generic code will use mdio. If it is not initialized before use,
the kernel will Oops.
Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ab138ca0a340e6d6e7a6a9bd5004bd8f83127ca ]
When sending TX packets, the meta descriptor can be all zeroes
as no meta information is required (as in XDP).
This patch removes the validity check, as when
`disable_meta_caching` is enabled, such TX packets will be
dropped otherwise.
Fixes: 0e3a3f6dacf0 ("net: ena: support new LLQ acceleration mode")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20231211062801.27891-5-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d760117060cf2e90b5c59c5492cab179a4dbce01 ]
This patch fixes two issues:
Issue 1
-------
Description
```````````
Current code does not call dma_sync_single_for_cpu() to sync data from
the device side memory to the CPU side memory before the XDP code path
uses the CPU side data.
This causes the XDP code path to read the unset garbage data in the CPU
side memory, resulting in incorrect handling of the packet by XDP.
Solution
````````
1. Add a call to dma_sync_single_for_cpu() before the XDP code starts to
use the data in the CPU side memory.
2. The XDP code verdict can be XDP_PASS, in which case there is a
fallback to the non-XDP code, which also calls
dma_sync_single_for_cpu().
To avoid calling dma_sync_single_for_cpu() twice:
2.1. Put the dma_sync_single_for_cpu() in the code in such a place where
it happens before XDP and non-XDP code.
2.2. Remove the calls to dma_sync_single_for_cpu() in the non-XDP code
for the first buffer only (rx_copybreak and non-rx_copybreak
cases), since the new call that was added covers these cases.
The call to dma_sync_single_for_cpu() for the second buffer and on
stays because only the first buffer is handled by the newly added
dma_sync_single_for_cpu(). And there is no need for special
handling of the second buffer and on for the XDP path since
currently the driver supports only single buffer packets.
Issue 2
-------
Description
```````````
In case the XDP code forwarded the packet (ENA_XDP_FORWARDED),
ena_unmap_rx_buff_attrs() is called with attrs set to 0.
This means that before unmapping the buffer, the internal function
dma_unmap_page_attrs() will also call dma_sync_single_for_cpu() on
the whole buffer (not only on the data part of it).
This sync is both wasteful (since a sync was already explicitly
called before) and also causes a bug, which will be explained
using the below diagram.
The following diagram shows the flow of events causing the bug.
The order of events is (1)-(4) as shown in the diagram.
CPU side memory area
(3)convert_to_xdp_frame() initializes the
headroom with xdpf metadata
||
\/
___________________________________
| |
0 | V 4K
---------------------------------------------------------------------
| xdpf->data | other xdpf | < data > | tailroom ||...|
| | fields | | GARBAGE || |
---------------------------------------------------------------------
/\ /\
|| ||
(4)ena_unmap_rx_buff_attrs() calls (2)dma_sync_single_for_cpu()
dma_sync_single_for_cpu() on the copies data from device
whole buffer page, overwriting side to CPU side memory
the xdpf->data with GARBAGE. ||
0 4K
---------------------------------------------------------------------
| headroom | < data > | tailroom ||...|
| GARBAGE | | GARBAGE || |
---------------------------------------------------------------------
Device side memory area /\
||
(1) device writes RX packet data
After the call to ena_unmap_rx_buff_attrs() in (4), the xdpf->data
becomes corrupted, and so when it is later accessed in
ena_clean_xdp_irq()->xdp_return_frame(), it causes a page fault,
crashing the kernel.
Solution
````````
Explicitly tell ena_unmap_rx_buff_attrs() not to call
dma_sync_single_for_cpu() by passing it the ENA_DMA_ATTR_SKIP_CPU_SYNC
flag.
Fixes: f7d625adeb7b ("net: ena: Add dynamic recycling mechanism for rx buffers")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20231211062801.27891-4-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 505b1a88d311ff6f8c44a34f94e3be21745cce6f ]
Current xdp code drops packets larger than ENA_XDP_MAX_MTU.
This is an incorrect condition since the problem is not the
size of the packet, rather the number of buffers it contains.
This commit:
1. Identifies and drops XDP multi-buffer packets at the
beginning of the function.
2. Increases the xdp drop statistic when this drop occurs.
3. Adds a one-time print that such drops are happening to
give better indication to the user.
Fixes: 838c93dc5449 ("net: ena: implement XDP drop support")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20231211062801.27891-3-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41db6f99b5489a0d2ef26afe816ef0c6118d1d47 ]
The ena_setup_and_create_all_xdp_queues() function freed all the
resources upon failure, after creating only xdp_num_queues queues,
instead of freeing just the created ones.
In this patch, the only resources that are freed, are the ones
allocated right before the failure occurs.
Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shahar Itzko <itzko@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20231211062801.27891-2-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b65d52ac9c085c0c52dee012a210d4e2f352611b ]
qed_ilt_shadow_alloc() will call qed_ilt_shadow_free() to
free p_hwfn->p_cxt_mngr->ilt_shadow on error. However,
qed_cxt_tables_alloc() accesses the freed pointer on failure
of qed_ilt_shadow_alloc() through calling qed_cxt_mngr_free(),
which may lead to use-after-free. Fix this issue by setting
p_mngr->ilt_shadow to NULL in qed_ilt_shadow_free().
Fixes: fe56b9e6a8d9 ("qed: Add module with basic common support")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20231210045255.21383-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ae42ef308ed0f6250b36f43e4eeb182ebbe6215 ]
Make the flow for pci shutdown be the same to the pci remove.
iavf_shutdown was implementing an incomplete version
of iavf_remove. It misses several calls to the kernel like
iavf_free_misc_irq, iavf_reset_interrupt_capability, iounmap
that might break the system on reboot or hibernation.
Implement the call of iavf_remove directly in iavf_shutdown to
close this gap.
Fixes below error messages (dmesg) during shutdown stress tests -
[685814.900917] ice 0000:88:00.0: MAC 02:d0:5f:82:43:5d does not exist for
VF 0
[685814.900928] ice 0000:88:00.0: MAC 33:33:00:00:00:01 does not exist for
VF 0
Reproduction:
1. Create one VF interface:
echo 1 > /sys/class/net/<interface_name>/device/sriov_numvfs
2. Run live dmesg on the host:
dmesg -wH
3. On SUT, script below steps into vf_namespace_assignment.sh
<#!/bin/sh> // Remove <>. Git removes # line
if=<VF name> (edit this per VF name)
loop=0
while true; do
echo test round $loop
let loop++
ip netns add ns$loop
ip link set dev $if up
ip link set dev $if netns ns$loop
ip netns exec ns$loop ip link set dev $if up
ip netns exec ns$loop ip link set dev $if netns 1
ip netns delete ns$loop
done
4. Run the script for at least 1000 iterations on SUT:
./vf_namespace_assignment.sh
Expected result:
No errors in dmesg.
Fixes: 129cf89e5856 ("iavf: rename functions and structs to new name")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Co-developed-by: Ranganatha Rao <ranganatha.rao@intel.com>
Signed-off-by: Ranganatha Rao <ranganatha.rao@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09d23b8918f9ab0f8114f6b94f2faf8bde3fb52a ]
ntuple-filter feature on/off:
Default is on. If turned off, the filters will be removed from both
PF and iavf list. The removal is irrespective of current filter state.
Steps to reproduce:
-------------------
1. Ensure ntuple is on.
ethtool -K enp8s0 ntuple-filters on
2. Create a filter to receive the traffic into non-default rx-queue like 15
and ensure traffic is flowing into queue into 15.
Now, turn off ntuple. Traffic should not flow to configured queue 15.
It should flow to default RX queue.
Fixes: 0dbfbabb840d ("iavf: Add framework to enable ethtool ntuple filters")
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Ranganatha Rao <ranganatha.rao@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a0b5a2929fdeda63fc921c2dbed237059acf732 ]
New states introduced:
IAVF_FDIR_FLTR_DIS_REQUEST
IAVF_FDIR_FLTR_DIS_PENDING
IAVF_FDIR_FLTR_INACTIVE
Current FDIR state machines (SM) are not adequate to handle a few
scenarios in the link DOWN/UP event, reset event and ntuple-feature.
For example, when VF link goes DOWN and comes back UP administratively,
the expectation is that previously installed filters should also be
restored. But with current SM, filters are not restored.
So with new SM, during link DOWN filters are marked as INACTIVE in
the iavf list but removed from PF. After link UP, SM will transition
from INACTIVE to ADD_REQUEST to restore the filter.
Similarly, with VF reset, filters will be removed from the PF, but
marked as INACTIVE in the iavf list. Filters will be restored after
reset completion.
Steps to reproduce:
-------------------
1. Create a VF. Here VF is enp8s0.
2. Assign IP addresses to VF and link partner and ping continuously
from remote. Here remote IP is 1.1.1.1.
3. Check default RX Queue of traffic.
ethtool -S enp8s0 | grep -E "rx-[[:digit:]]+\.packets"
4. Add filter - change default RX Queue (to 15 here)
ethtool -U ens8s0 flow-type ip4 src-ip 1.1.1.1 action 15 loc 5
5. Ensure filter gets added and traffic is received on RX queue 15 now.
Link event testing:
-------------------
6. Bring VF link down and up. If traffic flows to configured queue 15,
test is success, otherwise it is a failure.
Reset event testing:
--------------------
7. Reset the VF. If traffic flows to configured queue 15, test is success,
otherwise it is a failure.
Fixes: 0dbfbabb840d ("iavf: Add framework to enable ethtool ntuple filters")
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Ranganatha Rao <ranganatha.rao@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 810c38a369a0a0ce625b5c12169abce1dd9ccd53 ]
Because rose_ioctl() accesses sk->sk_receive_queue
without holding a sk->sk_receive_queue.lock, it can
cause a race with rose_accept().
A use-after-free for skb occurs with the following flow.
```
rose_ioctl() -> skb_peek()
rose_accept() -> skb_dequeue() -> kfree_skb()
```
Add sk->sk_receive_queue.lock to rose_ioctl() to fix this issue.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Link: https://lore.kernel.org/r/20231209100538.GA407321@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24e90b9e34f9e039f56b5f25f6e6eb92cdd8f4b3 ]
Because do_vcc_ioctl() accesses sk->sk_receive_queue
without holding a sk->sk_receive_queue.lock, it can
cause a race with vcc_recvmsg().
A use-after-free for skb occurs with the following flow.
```
do_vcc_ioctl() -> skb_peek()
vcc_recvmsg() -> skb_recv_datagram() -> skb_free_datagram()
```
Add sk->sk_receive_queue.lock to do_vcc_ioctl() to fix this issue.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Link: https://lore.kernel.org/r/20231209094210.GA403126@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 570ba37898ecd9069beb58bf0b6cf84daba6e0fe ]
The RSS flow algorithm is not set up correctly for promiscuous or all
multi MCAM entries. This has an impact on flow distribution.
This patch fixes the issue by updating flow algorithm index in above
mentioned MCAM entries.
Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet replication feature")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dbda436824ded8ef6a05bb82cd9baa8d42377a49 ]
Current implementation is such that, promisc mcam entry action
is set as multicast even when there are no trusted VFs. multicast
action causes the hardware to copy packet data, which reduces
the performance.
This patch fixes this issue by setting the promisc mcam entry action to
unicast instead of multicast when there are no trusted VFs. The same
change is made for the 'allmulti' mcam entry action.
Fixes: ffd2f89ad05c ("octeontx2-pf: Enable promisc/allmulti match MCAM entries.")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 284f717622417cb267e344a9174f8e5698d1e3c1 ]
The firmware ready value is 1, and get firmware ready status
function should explicitly test for that value. The firmware
ready value read will be 2 after driver load, and on unbind
till firmware rewrites the firmware ready back to 0, the value
seen by driver will be 2, which should be regarded as not ready.
Fixes: 10c073e40469 ("octeon_ep: defer probe if firmware not ready")
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28a7cb045ab700de5554193a1642917602787784 ]
The rvu_dl will be freed in rvu_nix_health_reporters_destroy(rvu_dl)
after the create_workqueue fails, and after that free, the rvu_dl will
be translate back through the following call chain:
rvu_nix_health_reporters_destroy
|-> rvu_nix_health_reporters_create
|-> rvu_health_reporters_create
|-> rvu_register_dl (label err_dl_health)
Finally. in the err_dl_health label, rvu_dl being freed again in
rvu_health_reporters_destroy(rvu) by rvu_nix_health_reporters_destroy.
In the second calls of rvu_nix_health_reporters_destroy, however,
it uses rvu_dl->rvu_nix_health_reporter, which is already freed at
the end of rvu_nix_health_reporters_destroy in the first call.
So this patch prevents the first destroy by instantly returning -ENONMEN
when create_workqueue fails. In addition, since the failure of
create_workqueue is the only entrence of label err, it has been
integrated into the error-handling path of create_workqueue.
Fixes: 5ed66306eab6 ("octeontx2-af: Add devlink health reporters for NIX")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fc95fe95c3e2a63ced8eeca4b256518ab204b63 ]
The old implementation extracted VLAN TCI info from the payload
before the VLAN tag has been pushed in the payload.
Another problem was that the VLAN TCI was extracted even if the
packet did not have VLAN protocol header.
This resulted in invalid VLAN TCI and as a consequence a random
queue was computed.
This patch fixes the above issues and use the VLAN TCI from the
skb if it is present or VLAN TCI from payload if present. If no
VLAN header is present queue 0 is selected.
Fixes: 52c4a1a85f4b ("net: fec: add ndo_select_queue to fix TX bandwidth fluctuations")
Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15319a4e8ee4b098118591c6ccbd17237f841613 ]
As &card->tx_queue_lock is acquired under softirq context along the
following call chain from solos_bh(), other acquisition of the same
lock inside process context should disable at least bh to avoid double
lock.
<deadlock #2>
pclose()
--> spin_lock(&card->tx_queue_lock)
<interrupt>
--> solos_bh()
--> fpga_tx()
--> spin_lock(&card->tx_queue_lock)
This flaw was found by an experimental static analysis tool I am
developing for irq-related deadlock.
To prevent the potential deadlock, the patch uses spin_lock_bh()
on &card->tx_queue_lock under process context code consistently to
prevent the possible deadlock scenario.
Fixes: 213e85d38912 ("solos-pci: clean up pclose() function")
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5dba32b8f6cb39be708b726044ba30dbc088b30 ]
As &card->cli_queue_lock is acquired under softirq context along the
following call chain from solos_bh(), other acquisition of the same
lock inside process context should disable at least bh to avoid double
lock.
<deadlock #1>
console_show()
--> spin_lock(&card->cli_queue_lock)
<interrupt>
--> solos_bh()
--> spin_lock(&card->cli_queue_lock)
This flaw was found by an experimental static analysis tool I am
developing for irq-related deadlock.
To prevent the potential deadlock, the patch uses spin_lock_bh()
on the card->cli_queue_lock under process context code consistently
to prevent the possible deadlock scenario.
Fixes: 9c54004ea717 ("atm: Driver for Solos PCI ADSL2+ card.")
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c13e268c0768659cdaae4bfe2fb24860bcc8ddb4 ]
When the chip is configured to timestamp all receive packets, the
timestamp in the RX completion is only valid if the metadata
present flag is not set for packets received on the wire. In
addition, internal loopback packets will never have a valid timestamp
and the timestamp field will always be zero. We must exclude
any 0 value in the timestamp field because there is no way to
determine if it is a loopback packet or not.
Add a new function bnxt_rx_ts_valid() to check for all timestamp
valid conditions.
Fixes: 66ed81dcedc6 ("bnxt_en: Enable packet timestamping for all RX packets")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231208001658.14230-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd6781c18cb5b5e5d8c5873fa9a51668e89ec76e ]
The wait_event_interruptible_timeout() function returns 0
if the timeout elapsed, -ERESTARTSYS if it was interrupted
by a signal, and the remaining jiffies otherwise if the
condition evaluated to true before the timeout elapsed.
Driver should have checked for zero return value instead of
a positive value.
MChan: Print a warning for -ERESTARTSYS. The close operation
will proceed anyway when wait_event_interruptible_timeout()
returns for any reason. Since we do the close no matter what,
we should not return this error code to the caller. Change
bnxt_close_nic() to a void function and remove all error
handling from some of the callers.
Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231208001658.14230-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aded5d1feb08e48d544845d3594d70c4d5fe6e54 ]
Receive SKBs can go through the VF-rep path or the normal path.
skb_mark_for_recycle() is only called for the normal path. Fix it
to do it for both paths to fix possible stalled page pool shutdown
errors.
Fixes: 86b05508f775 ("bnxt_en: Use the unified RX page pool buffers for XDP and non-XDP")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231208001658.14230-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ef7c58f5abe41e6d91f37f28fe2d851ffedd92a ]
We are issuing HWRM_FUNC_RESET cmd to reset the device including
all reserved resources, but not clearing the reservations
within the driver struct. As a result, when the driver re-initializes
as part of resume, it believes that there is no need to do any
resource reservation and goes ahead and tries to allocate rings
which will eventually fail beyond a certain number pre-reserved by
the firmware.
Fixes: 674f50a5b026 ("bnxt_en: Implement new method to reserve rings.")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231208001658.14230-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1057812d146dd658c9a9a96d869c2551150207b5 ]
In case of a reset triggered by the QCA7000 itself, the behavior of the
qca_spi driver was not quite correct:
- in case of a pending RX frame decoding the drop counter must be
incremented and decoding state machine reseted
- also the reset counter must always be incremented regardless of sync
state
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231206141222.52029-4-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96a7e861d9e04d07febd3011c30cd84cd141d81f ]
After calling ethtool -g it was not possible to adjust the TX ring
size again:
# ethtool -g eth1
Ring parameters for eth1:
Pre-set maximums:
RX: 4
RX Mini: n/a
RX Jumbo: n/a
TX: 10
Current hardware settings:
RX: 4
RX Mini: n/a
RX Jumbo: n/a
TX: 10
# ethtool -G eth1 tx 8
netlink error: Invalid argument
The reason for this is that the readonly setting rx_pending get
initialized and after that the range check in qcaspi_set_ringparam()
fails regardless of the provided parameter. So fix this by accepting
the exposed RX defaults. Instead of adding another magic number
better use a new define here.
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231206141222.52029-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4e6064c97c050bd9904925ff7d53d0c9954fc7b ]
The qca_spi driver stop and restart the SPI kernel thread
(via ndo_stop & ndo_open) in case of TX ring changes. This is
a big issue because it allows userspace to prevent restart of
the SPI kernel thread (via signals). A subsequent change of
TX ring wrongly assume a valid spi_thread pointer which result
in a crash.
So prevent this by stopping the network traffic handling and
temporary park the SPI thread.
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231206141222.52029-2-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd4a816752bab609dd6d65ae021387beb9e2ddbd ]
Lorenzo points out that we effectively clear all unknown
flags from PIO when copying them to userspace in the netlink
RTM_NEWPREFIX notification.
We could fix this one at a time as new flags are defined,
or in one fell swoop - I choose the latter.
We could either define 6 new reserved flags (reserved1..6) and handle
them individually (and rename them as new flags are defined), or we
could simply copy the entire unmodified byte over - I choose the latter.
This unfortunately requires some anonymous union/struct magic,
so we add a static assert on the struct size for a little extra safety.
Cc: David Ahern <dsahern@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7aaf975238c47b710fcc4eca0da1e7902a53abe2 ]
Previously, when comparing the net namespaces, the case where the netdev
doesn't exist wasn't taken into account, and therefore can cause a crash.
In such a case, the comparing function should return false, as there is no
netdev->net to compare the devlink->net to.
Furthermore, this will result in an attempt to enter switchdev mode
without a netdev to fail, and which is the desired result as there is no
meaning in switchdev mode without a net device.
Fixes: 662404b24a4c ("net/mlx5e: Block entering switchdev mode with ns inconsistency")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Gavi Teitz <gavi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d7a3f2612d75de5f371a681038b089ded6667eb ]
Current sync reset flow is not supported when PCIe bridge connected
directly to mlx5 device has HotPlug interrupt enabled and can be
triggered on link state change event. Return nack on reset request in
such case.
Fixes: 92501fa6e421 ("net/mlx5: Ack on sync_reset_request only if PF can do reset_now")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eab0da38912ebdad922ed0388209f7eb0a5163cd ]
Due to the cited patch, devlink health commands take devlink lock and
this may result in deadlock for mlx5e_tx_reporter as it takes local
state_lock before calling devlink health report and on the other hand
devlink health commands such as diagnose for same reporter take local
state_lock after taking devlink lock (see kernel log below).
To fix it, remove local state_lock from mlx5e_tx_timeout_work() before
calling devlink_health_report() and take care to cancel the work before
any call to close channels, which may free the SQs that should be
handled by the work. Before cancel_work_sync(), use current_work() to
check we are not calling it from within the work, as
mlx5e_tx_timeout_work() itself may close the channels and reopen as part
of recovery flow.
While removing state_lock from mlx5e_tx_timeout_work() keep rtnl_lock to
ensure no change in netdev->real_num_tx_queues, but use rtnl_trylock()
and a flag to avoid deadlock by calling cancel_work_sync() before
closing the channels while holding rtnl_lock too.
Kernel log:
======================================================
WARNING: possible circular locking dependency detected
6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1 Not tainted
------------------------------------------------------
kworker/u16:2/65 is trying to acquire lock:
ffff888122f6c2f8 (&devlink->lock_key#2){+.+.}-{3:3}, at: devlink_health_report+0x2f1/0x7e0
but task is already holding lock:
ffff888121d20be0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&priv->state_lock){+.+.}-{3:3}:
__mutex_lock+0x12c/0x14b0
mlx5e_rx_reporter_diagnose+0x71/0x700 [mlx5_core]
devlink_nl_cmd_health_reporter_diagnose_doit+0x212/0xa50
genl_family_rcv_msg_doit+0x1e9/0x2f0
genl_rcv_msg+0x2e9/0x530
netlink_rcv_skb+0x11d/0x340
genl_rcv+0x24/0x40
netlink_unicast+0x438/0x710
netlink_sendmsg+0x788/0xc40
sock_sendmsg+0xb0/0xe0
__sys_sendto+0x1c1/0x290
__x64_sys_sendto+0xdd/0x1b0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
-> #0 (&devlink->lock_key#2){+.+.}-{3:3}:
__lock_acquire+0x2c8a/0x6200
lock_acquire+0x1c1/0x550
__mutex_lock+0x12c/0x14b0
devlink_health_report+0x2f1/0x7e0
mlx5e_health_report+0xc9/0xd7 [mlx5_core]
mlx5e_reporter_tx_timeout+0x2ab/0x3d0 [mlx5_core]
mlx5e_tx_timeout_work+0x1c1/0x280 [mlx5_core]
process_one_work+0x7c2/0x1340
worker_thread+0x59d/0xec0
kthread+0x28f/0x330
ret_from_fork+0x1f/0x30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&priv->state_lock);
lock(&devlink->lock_key#2);
lock(&priv->state_lock);
lock(&devlink->lock_key#2);
*** DEADLOCK ***
4 locks held by kworker/u16:2/65:
#0: ffff88811a55b138 ((wq_completion)mlx5e#2){+.+.}-{0:0}, at: process_one_work+0x6e2/0x1340
#1: ffff888101de7db8 ((work_completion)(&priv->tx_timeout_work)){+.+.}-{0:0}, at: process_one_work+0x70f/0x1340
#2: ffffffff84ce8328 (rtnl_mutex){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x53/0x280 [mlx5_core]
#3: ffff888121d20be0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core]
stack backtrace:
CPU: 1 PID: 65 Comm: kworker/u16:2 Not tainted 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core]
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x7d
check_noncircular+0x278/0x300
? print_circular_bug+0x460/0x460
? find_held_lock+0x2d/0x110
? __stack_depot_save+0x24c/0x520
? alloc_chain_hlocks+0x228/0x700
__lock_acquire+0x2c8a/0x6200
? register_lock_class+0x1860/0x1860
? kasan_save_stack+0x1e/0x40
? kasan_set_free_info+0x20/0x30
? ____kasan_slab_free+0x11d/0x1b0
? kfree+0x1ba/0x520
? devlink_health_do_dump.part.0+0x171/0x3a0
? devlink_health_report+0x3d5/0x7e0
lock_acquire+0x1c1/0x550
? devlink_health_report+0x2f1/0x7e0
? lockdep_hardirqs_on_prepare+0x400/0x400
? find_held_lock+0x2d/0x110
__mutex_lock+0x12c/0x14b0
? devlink_health_report+0x2f1/0x7e0
? devlink_health_report+0x2f1/0x7e0
? mutex_lock_io_nested+0x1320/0x1320
? trace_hardirqs_on+0x2d/0x100
? bit_wait_io_timeout+0x170/0x170
? devlink_health_do_dump.part.0+0x171/0x3a0
? kfree+0x1ba/0x520
? devlink_health_do_dump.part.0+0x171/0x3a0
devlink_health_report+0x2f1/0x7e0
mlx5e_health_report+0xc9/0xd7 [mlx5_core]
mlx5e_reporter_tx_timeout+0x2ab/0x3d0 [mlx5_core]
? lockdep_hardirqs_on_prepare+0x400/0x400
? mlx5e_reporter_tx_err_cqe+0x1b0/0x1b0 [mlx5_core]
? mlx5e_tx_reporter_timeout_dump+0x70/0x70 [mlx5_core]
? mlx5e_tx_reporter_dump_sq+0x320/0x320 [mlx5_core]
? mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core]
? mutex_lock_io_nested+0x1320/0x1320
? process_one_work+0x70f/0x1340
? lockdep_hardirqs_on_prepare+0x400/0x400
? lock_downgrade+0x6e0/0x6e0
mlx5e_tx_timeout_work+0x1c1/0x280 [mlx5_core]
process_one_work+0x7c2/0x1340
? lockdep_hardirqs_on_prepare+0x400/0x400
? pwq_dec_nr_in_flight+0x230/0x230
? rwlock_bug.part.0+0x90/0x90
worker_thread+0x59d/0xec0
? process_one_work+0x1340/0x1340
kthread+0x28f/0x330
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Fixes: c90005b5f75c ("devlink: Hold the instance lock in health callbacks")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 762a55a54eec4217e4cec9265ab6e5d4c11b61bd ]
IPsec FDB offload can only work with FW steering as of now,
disable the cap upon non FW steering.
And since the IPSec cap is dynamic now based on steering mode.
Cleanup the resources if they exist instead of checking the
IPsec cap again.
Fixes: edd8b295f9e2 ("Merge branch 'mlx5-ipsec-packet-offload-support-in-eswitch-mode'")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d293714ac32650bfb669ceadf7cc2fad8161401 ]
Send blocking events from IB driver whenever the device is done being
affiliated or if it is removed from an affiliation.
This is useful since now the EN driver can register to those event and
know when a device is affiliated or not.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/a7491c3e483cfd8d962f5f75b9a25f253043384a.1695296682.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of: 762a55a54eec ("net/mlx5e: Disable IPsec offload support if not FW steering")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e25b661f484df54b6751b65f9ea2434a3b67539 ]
After IPSec TX tables are destroyed, the flow rules in TC rhashtable,
which have the destination to IPSec, are restored to the original
one, the uplink.
However, when the device is in switchdev mode and unload driver with
IPSec rules configured, TC rhashtable cleanup is done before IPSec
cleanup, which means tc_ht->tbl is already freed when walking TC
rhashtable, in order to restore the destination. So add the checking
before walking to avoid unexpected behavior.
Fixes: d1569537a837 ("net/mlx5e: Modify and restore TC rules for IPSec TX rules")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit baac8351f74c543896b8fd40138b7ad9365587a3 ]
Currently eswitch mode_lock is so heavy, for example, it's locked
during the whole process of the mode change, which may need to hold
other locks. As the mode_lock is also used by IPSec to block mode and
encap change now, it is easy to cause lock dependency.
Since some of protections are also done by devlink lock, the eswitch
mode_lock is not needed at those places, and thus the possibility of
lockdep issue is reduced.
Fixes: c8e350e62fc5 ("net/mlx5e: Make TC and IPsec offloads mutually exclusive on a netdev")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2bf84f1d1a1595dcc45fe867f0e02b331993fee ]
IPsec NAT-T packets are UDP encapsulated packets over ESP normal ones.
In case they arrive to RX, the SPI and ESP are located in inner header,
while the check was performed on outer header instead.
That wrong check caused to the situation where received rekeying request
was missed and caused to rekey timeout, which "compensated" this failure
by completing rekeying.
Fixes: d65954934937 ("net/mlx5e: Support IPsec NAT-T functionality")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94af50c0a9bb961fe93cf0fdd14eb0883da86721 ]
Change normal IPsec flow to use the same creation/destruction functions
for status flow table as that of ESW, which first of all refines the
code to have less code duplication.
And more importantly, the ESW status table handles IPsec syndrome
checks at steering by HW, which is more efficient than the previous
behaviour we had where it was copied to WQE meta data and checked
by the driver.
Fixes: 1762f132d542 ("net/mlx5e: Support IPsec packet offload for RX in switchdev mode")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d42c8cc67a8fcbff0181f9ed6d03d353edcee07 ]
According to RFC4303, section "3.3.3. Sequence Number Generation",
the first packet sent using a given SA will contain a sequence
number of 1.
However if user didn't set seq/oseq, the HW used zero as first sequence
packet number. Such misconfiguration causes to drop of first packet
if replay window protection was enabled in SA.
To fix it, set sequence number to be at least 1.
Fixes: 7db21ef4566e ("net/mlx5e: Set IPsec replay sequence numbers")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5e400a985df8041ed4659ed1462aa9134318130 ]
Users can configure IPsec replay window size, but mlx5 driver didn't
honor their choice and set always 32bits. Fix assignment logic to
configure right size from the beginning.
Fixes: 7db21ef4566e ("net/mlx5e: Set IPsec replay sequence numbers")
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43527a0094c10dfbf0d5a2e7979395a38de3ff65 ]
Commit 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and
stop applying workaround") introduced a regression for ThinkPad
TrackPoint Keyboard II which has similar quirks to cptkbd (so it uses
the same workarounds) but slightly different so that there are
false-positives during detecting well-behaving firmware. This commit
restricts detecting well-behaving firmware to the only model which
known to have one and have stable enough quirks to not cause
false-positives.
Fixes: 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround")
Link: https://lore.kernel.org/linux-input/ZXRiiPsBKNasioqH@jekhomev/
Link: https://bbs.archlinux.org/viewtopic.php?pid=2135468#p2135468
Signed-off-by: Mikhail Khvainitski <me@khvoinitsky.org>
Tested-by: Yauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
