IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 96a4d8912b28451cd62825fd7caa0e66e091d938 upstream.
The pipe ring size must always be a power of 2 as the head and tail
pointers are masked off by AND'ing with the size of the ring - 1.
watch_queue_set_size(), however, lets you specify any number of notes
between 1 and 511. This number is passed through to pipe_resize_ring()
without checking/forcing its alignment.
Fix this by rounding the number of slots required up to the nearest
power of two. The request is meant to guarantee that at least that many
notifications can be generated before the queue is full, so rounding
down isn't an option, but, alternatively, it may be better to give an
error if we aren't allowed to allocate that much ring space.
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1853fbadcba1497f4907971e7107888e0714c81 upstream.
When a pipe ring descriptor points to a notification message, the
refcount on the backing page is incremented by the generic get function,
but the release function, which marks the bitmap, doesn't drop the page
ref.
Fix this by calling generic_pipe_buf_release() at the end of
watch_queue_pipe_buf_release().
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db8facfc9fafacefe8a835416a6b77c838088f8b upstream.
In free_pipe_info(), free the watchqueue state after clearing the pipe
ring as each pipe ring descriptor has a release function, and in the
case of a notification message, this is watch_queue_pipe_buf_release()
which tries to mark the allocation bitmap that was previously released.
Fix this by moving the put of the pipe's ref on the watch queue to after
the ring has been cleared. We still need to call watch_queue_clear()
before doing that to make sure that the pipe is disconnected from any
notification sources first.
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4fa59ede95195f267101a1b8916992cf3f245cdb upstream.
The feature negotiation was designed in a way that
makes it possible for devices to know which config
fields will be accessed by drivers.
This is broken since commit 404123c2db79 ("virtio: allow drivers to
validate features") with fallout in at least block and net. We have a
partial work-around in commit 2f9a174f918e ("virtio: write back
F_VERSION_1 before validate") which at least lets devices find out which
format should config space have, but this is a partial fix: guests
should not access config space without acknowledging features since
otherwise we'll never be able to change the config space format.
To fix, split finalize_features from virtio_finalize_features and
call finalize_features with all feature bits before validation,
and then - if validation changed any bits - once again after.
Since virtio_finalize_features no longer writes out features
rename it to virtio_features_ok - since that is what it does:
checks that features are ok with the device.
As a side effect, this also reduces the amount of hypervisor accesses -
we now only acknowledge features once unless we are clearing any
features when validating (which is uncommon).
IRC I think that this was more or less always the intent in the spec but
unfortunately the way the spec is worded does not say this explicitly, I
plan to address this at the spec level, too.
Acked-by: Jason Wang <jasowang@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 404123c2db79 ("virtio: allow drivers to validate features")
Fixes: 2f9a174f918e ("virtio: write back F_VERSION_1 before validate")
Cc: "Halil Pasic" <pasic@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 838d6d3461db0fdbf33fc5f8a69c27b50b4a46da upstream.
virtio_finalize_features is only used internally within virtio.
No reason to export it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1cc1697bb56cdf880ad4d17b79a39ef2c294bc9 upstream.
Legacy and old PCI I/O based cards do not support 32-bit I/O addressing.
Since commit 64f160e19e92 ("PCI: aardvark: Configure PCIe resources from
'ranges' DT property") kernel can set different PCIe address on CPU and
different on the bus for the one A37xx address mapping without any firmware
support in case the bus address does not conflict with other A37xx mapping.
So remap I/O space to the bus address 0x0 to enable support for old legacy
I/O port based cards which have hardcoded I/O ports in low address space.
Note that DDR on A37xx is mapped to bus address 0x0. And mapping of I/O
space can be set to address 0x0 too because MEM space and I/O space are
separate and so do not conflict.
Remapping IO space on Turris Mox to different address is not possible to
due bootloader bug.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 76f6386b25cc ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700")
Cc: stable@vger.kernel.org # 64f160e19e92 ("PCI: aardvark: Configure PCIe resources from 'ranges' DT property")
Cc: stable@vger.kernel.org # 514ef1e62d65 ("arm64: dts: marvell: armada-37xx: Extend PCIe MEM space")
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0966d385830de3470b7131db8e86c0c5bc9c52dc upstream.
RISC-V can do PC-relative jumps with a 32bit range using the following
two instructions:
auipc t0, imm20 ; t0 = PC + imm20 * 2^12
jalr ra, t0, imm12 ; ra = PC + 4, PC = t0 + imm12
Crucially both the 20bit immediate imm20 and the 12bit immediate imm12
are treated as two's-complement signed values. For this reason the
immediates are usually calculated like this:
imm20 = (offset + 0x800) >> 12
imm12 = offset & 0xfff
..where offset is the signed offset from the auipc instruction. When
the 11th bit of offset is 0 the addition of 0x800 doesn't change the top
20 bits and imm12 considered positive. When the 11th bit is 1 the carry
of the addition by 0x800 means imm20 is one higher, but since imm12 is
then considered negative the two's complement representation means it
all cancels out nicely.
However, this addition by 0x800 (2^11) means an offset greater than or
equal to 2^31 - 2^11 would overflow so imm20 is considered negative and
result in a backwards jump. Similarly the lower range of offset is also
moved down by 2^11 and hence the true 32bit range is
[-2^31 - 2^11, 2^31 - 2^11)
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Fixes: e2c0cdfba7f6 ("RISC-V: User-facing API")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0d2f15362f02444c5d7ffd5a5eb03e4aa54b685 upstream.
Currently meson_mmc_post_req() is called in meson_mmc_request() right
after meson_mmc_start_cmd(). This could lead to DMA unmapping before the request
is actually finished.
To fix, don't call meson_mmc_post_req() until meson_mmc_request_done().
Signed-off-by: Rong Chen <rong.chen@amlogic.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Fixes: 79ed05e329c3 ("mmc: meson-gx: add support for descriptor chain mode")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220216124239.4007667-1-rong.chen@amlogic.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0bf476fc3624e3a72af4ba7340d430a91c18cd67 upstream.
There is an oddity in the way the RSR register flags propagate to the
ISR register (and the actual interrupt output) on this hardware: it
appears that RSR register bits only result in ISR being asserted if the
interrupt was actually enabled at the time, so enabling interrupts with
RSR bits already set doesn't trigger an interrupt to be raised. There
was already a partial fix for this race in the macb_poll function where
it checked for RSR bits being set and re-triggered NAPI receive.
However, there was a still a race window between checking RSR and
actually enabling interrupts, where a lost wakeup could happen. It's
necessary to check again after enabling interrupts to see if RSR was set
just prior to the interrupt being enabled, and re-trigger receive in that
case.
This issue was noticed in a point-to-point UDP request-response protocol
which periodically saw timeouts or abnormally high response times due to
received packets not being processed in a timely fashion. In many
applications, more packets arriving, including TCP retransmissions, would
cause the original packet to be processed, thus masking the issue.
Fixes: 02f7a34f34e3 ("net: macb: Re-enable RX interrupt only when RX is done")
Cc: stable@vger.kernel.org
Co-developed-by: Scott McNutt <scott.mcnutt@siriusxm.com>
Signed-off-by: Scott McNutt <scott.mcnutt@siriusxm.com>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc7f750dc9d102c1ed7bbe4591f991e770c99033 upstream.
The netif_rx_ni() function frees the skb so we can't dereference it to
save the skb->len.
Fixes: 61e121047645 ("staging: gdm7240: adding LTE USB driver")
Cc: stable <stable@vger.kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220228074331.GA13685@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f4347081be32e67b0873827e0138ab0fdaaf450 upstream.
Commit 54659ca026e5 ("staging: rtl8723bs: remove possible deadlock when
disconnect (v2)") split the locking of pxmitpriv->lock vs sleep_q/lock
into 2 locks in attempt to fix a lockdep reported issue with the locking
order of the sta_hash_lock vs pxmitpriv->lock.
But in the end this turned out to not fully solve the sta_hash_lock issue
so commit a7ac783c338b ("staging: rtl8723bs: remove a second possible
deadlock") was added to fix this in another way.
The original fix was kept as it was still seen as a good thing to have,
but now it turns out that it creates a deadlock in access-point mode:
[Feb20 23:47] ======================================================
[ +0.074085] WARNING: possible circular locking dependency detected
[ +0.074077] 5.16.0-1-amd64 #1 Tainted: G C E
[ +0.064710] ------------------------------------------------------
[ +0.074075] ksoftirqd/3/29 is trying to acquire lock:
[ +0.060542] ffffb8b30062ab00 (&pxmitpriv->lock){+.-.}-{2:2}, at: rtw_xmit_classifier+0x8a/0x140 [r8723bs]
[ +0.114921]
but task is already holding lock:
[ +0.069908] ffffb8b3007ab704 (&psta->sleep_q.lock){+.-.}-{2:2}, at: wakeup_sta_to_xmit+0x3b/0x300 [r8723bs]
[ +0.116976]
which lock already depends on the new lock.
[ +0.098037]
the existing dependency chain (in reverse order) is:
[ +0.089704]
-> #1 (&psta->sleep_q.lock){+.-.}-{2:2}:
[ +0.077232] _raw_spin_lock_bh+0x34/0x40
[ +0.053261] xmitframe_enqueue_for_sleeping_sta+0xc1/0x2f0 [r8723bs]
[ +0.082572] rtw_xmit+0x58b/0x940 [r8723bs]
[ +0.056528] _rtw_xmit_entry+0xba/0x350 [r8723bs]
[ +0.062755] dev_hard_start_xmit+0xf1/0x320
[ +0.056381] sch_direct_xmit+0x9e/0x360
[ +0.052212] __dev_queue_xmit+0xce4/0x1080
[ +0.055334] ip6_finish_output2+0x18f/0x6e0
[ +0.056378] ndisc_send_skb+0x2c8/0x870
[ +0.052209] ndisc_send_ns+0xd3/0x210
[ +0.050130] addrconf_dad_work+0x3df/0x5a0
[ +0.055338] process_one_work+0x274/0x5a0
[ +0.054296] worker_thread+0x52/0x3b0
[ +0.050124] kthread+0x16c/0x1a0
[ +0.044925] ret_from_fork+0x1f/0x30
[ +0.049092]
-> #0 (&pxmitpriv->lock){+.-.}-{2:2}:
[ +0.074101] __lock_acquire+0x10f5/0x1d80
[ +0.054298] lock_acquire+0xd7/0x300
[ +0.049088] _raw_spin_lock_bh+0x34/0x40
[ +0.053248] rtw_xmit_classifier+0x8a/0x140 [r8723bs]
[ +0.066949] rtw_xmitframe_enqueue+0xa/0x20 [r8723bs]
[ +0.066946] rtl8723bs_hal_xmitframe_enqueue+0x14/0x50 [r8723bs]
[ +0.078386] wakeup_sta_to_xmit+0xa6/0x300 [r8723bs]
[ +0.065903] rtw_recv_entry+0xe36/0x1160 [r8723bs]
[ +0.063809] rtl8723bs_recv_tasklet+0x349/0x6c0 [r8723bs]
[ +0.071093] tasklet_action_common.constprop.0+0xe5/0x110
[ +0.070966] __do_softirq+0x16f/0x50a
[ +0.050134] __irq_exit_rcu+0xeb/0x140
[ +0.051172] irq_exit_rcu+0xa/0x20
[ +0.047006] common_interrupt+0xb8/0xd0
[ +0.052214] asm_common_interrupt+0x1e/0x40
[ +0.056381] finish_task_switch.isra.0+0x100/0x3a0
[ +0.063670] __schedule+0x3ad/0xd20
[ +0.048047] schedule+0x4e/0xc0
[ +0.043880] smpboot_thread_fn+0xc4/0x220
[ +0.054298] kthread+0x16c/0x1a0
[ +0.044922] ret_from_fork+0x1f/0x30
[ +0.049088]
other info that might help us debug this:
[ +0.095950] Possible unsafe locking scenario:
[ +0.070952] CPU0 CPU1
[ +0.054282] ---- ----
[ +0.054285] lock(&psta->sleep_q.lock);
[ +0.047004] lock(&pxmitpriv->lock);
[ +0.074082] lock(&psta->sleep_q.lock);
[ +0.077209] lock(&pxmitpriv->lock);
[ +0.043873]
*** DEADLOCK ***
[ +0.070950] 1 lock held by ksoftirqd/3/29:
[ +0.049082] #0: ffffb8b3007ab704 (&psta->sleep_q.lock){+.-.}-{2:2}, at: wakeup_sta_to_xmit+0x3b/0x300 [r8723bs]
Analysis shows that in hindsight the splitting of the lock was not
a good idea, so revert this to fix the access-point mode deadlock.
Note this is a straight-forward revert done with git revert, the commented
out "/* spin_lock_bh(&psta_bmc->sleep_q.lock); */" lines were part of the
code before the reverted changes.
Fixes: 54659ca026e5 ("staging: rtl8723bs: remove possible deadlock when disconnect (v2)")
Cc: stable <stable@vger.kernel.org>
Cc: Fabio Aiuto <fabioaiuto83@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215542
Link: https://lore.kernel.org/r/20220302101637.26542-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c4bcfdecb1ac0967619ee7ff44871d93c08c909 upstream.
In FOPEN_DIRECT_IO mode, fuse_file_write_iter() calls
fuse_direct_write_iter(), which normally calls fuse_direct_io(), which then
imports the write buffer with fuse_get_user_pages(), which uses
iov_iter_get_pages() to grab references to userspace pages instead of
actually copying memory.
On the filesystem device side, these pages can then either be read to
userspace (via fuse_dev_read()), or splice()d over into a pipe using
fuse_dev_splice_read() as pipe buffers with &nosteal_pipe_buf_ops.
This is wrong because after fuse_dev_do_read() unlocks the FUSE request,
the userspace filesystem can mark the request as completed, causing write()
to return. At that point, the userspace filesystem should no longer have
access to the pipe buffer.
Fix by copying pages coming from the user address space to new pipe
buffers.
Reported-by: Jann Horn <jannh@google.com>
Fixes: c3021629a0d8 ("fuse: support splice() reading from fuse device")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 68453767131a5deec1e8f9ac92a9042f929e585d upstream.
When CONFIG_GENERIC_CPU_VULNERABILITIES is not set, references
to spectre_v2_update_state() cause a build error, so provide an
empty stub for that function when the Kconfig option is not set.
Fixes this build error:
arm-linux-gnueabi-ld: arch/arm/mm/proc-v7-bugs.o: in function `cpu_v7_bugs_init':
proc-v7-bugs.c:(.text+0x52): undefined reference to `spectre_v2_update_state'
arm-linux-gnueabi-ld: proc-v7-bugs.c:(.text+0x82): undefined reference to `spectre_v2_update_state'
Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fda153c89af344d21df281009a9d046cf587ea0f ]
Running the memfd script ./run_hugetlbfs_test.sh will often end in error
as follows:
memfd-hugetlb: CREATE
memfd-hugetlb: BASIC
memfd-hugetlb: SEAL-WRITE
memfd-hugetlb: SEAL-FUTURE-WRITE
memfd-hugetlb: SEAL-SHRINK
fallocate(ALLOC) failed: No space left on device
./run_hugetlbfs_test.sh: line 60: 166855 Aborted (core dumped) ./memfd_test hugetlbfs
opening: ./mnt/memfd
fuse: DONE
If no hugetlb pages have been preallocated, run_hugetlbfs_test.sh will
allocate 'just enough' pages to run the test. In the SEAL-FUTURE-WRITE
test the mfd_fail_write routine maps the file, but does not unmap. As a
result, two hugetlb pages remain reserved for the mapping. When the
fallocate call in the SEAL-SHRINK test attempts allocate all hugetlb
pages, it is short by the two reserved pages.
Fix by making sure to unmap in mfd_fail_write.
Link: https://lkml.kernel.org/r/20220219004340.56478-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c0d8833a605e195ae219b5042577ce52bf71fff ]
valid_lft, prefered_lft and tstamp are always accessed under the lock
"lock" in other places. Reading these without taking the lock may result
in inconsistencies regarding the calculation of the valid and preferred
variables since decisions are taken on these fields for those variables.
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Niels Dossche <niels.dossche@ugent.be>
Link: https://lore.kernel.org/r/20220223131954.6570-1-niels.dossche@ugent.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8240addd0a3919e0fd7436416afe9aa6429c484 ]
This reverts commit 2afeec08ab5c86ae21952151f726bfe184f6b23d.
The reasoning in the commit was wrong - the code expected to setup the
watch even if 'hotplug-status' didn't exist. In fact, it relied on the
watch being fired the first time - to check if maybe 'hotplug-status' is
already set to 'connected'. Not registering a watch for non-existing
path (which is the case if hotplug script hasn't been executed yet),
made the backend not waiting for the hotplug script to execute. This in
turns, made the netfront think the interface is fully operational, while
in fact it was not (the vif interface on xen-netback side might not be
configured yet).
This was a workaround for 'hotplug-status' erroneously being removed.
But since that is reverted now, the workaround is not necessary either.
More discussion at
https://lore.kernel.org/xen-devel/afedd7cb-a291-e773-8b0d-4db9b291fa98@ipxe.org/T/#u
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Michael Brown <mbrown@fensystems.co.uk>
Link: https://lore.kernel.org/r/20220222001817.2264967-2-marmarek@invisiblethingslab.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f4558ae91870692ce7f509c31c9d6ee721d8cdc ]
This reverts commit 1f2565780e9b7218cf92c7630130e82dcc0fe9c2.
The 'hotplug-status' node should not be removed as long as the vif
device remains configured. Otherwise the xen-netback would wait for
re-running the network script even if it was already called (in case of
the frontent re-connecting). But also, it _should_ be removed when the
vif device is destroyed (for example when unbinding the driver) -
otherwise hotplug script would not configure the device whenever it
re-appear.
Moving removal of the 'hotplug-status' node was a workaround for nothing
calling network script after xen-netback module is reloaded. But when
vif interface is re-created (on xen-netback unbind/bind for example),
the script should be called, regardless of who does that - currently
this case is not handled by the toolstack, and requires manual
script call. Keeping hotplug-status=connected to skip the call is wrong
and leads to not configured interface.
More discussion at
https://lore.kernel.org/xen-devel/afedd7cb-a291-e773-8b0d-4db9b291fa98@ipxe.org/T/#u
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20220222001817.2264967-1-marmarek@invisiblethingslab.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae42f9288846353982e2eab181fb41e7fd8bf60f ]
We are racing the registering of .to_irq when probing the
i2c driver. This results in random failure of touchscreen
devices.
Following explains the race condition better.
[gpio driver] gpio driver registers gpio chip
[gpio consumer] gpio is acquired
[gpio consumer] gpiod_to_irq() fails with -ENXIO
[gpio driver] gpio driver registers irqchip
gpiod_to_irq works at this point, but -ENXIO is fatal
We could see the following errors in dmesg logs when gc->to_irq is NULL
[2.101857] i2c_hid i2c-FTS3528:00: HID over i2c has not been provided an Int IRQ
[2.101953] i2c_hid: probe of i2c-FTS3528:00 failed with error -22
To avoid this situation, defer probing until to_irq is registered.
Returning -EPROBE_DEFER would be the first step towards avoiding
the failure of devices due to the race in registration of .to_irq.
Final solution to this issue would be to avoid using gc irq members
until they are fully initialized.
This issue has been reported many times in past and people have been
using workarounds like changing the pinctrl_amd to built-in instead
of loading it as a module or by adding a softdep for pinctrl_amd into
the config file.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209413
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35f165f08950a876f1b95a61d79c93678fba2fd6 ]
Almost all fault/warning bits in pmbus status registers remain set even
after fault/warning condition are removed. As per pmbus specification
these faults must be cleared by user.
Modify hwmon behavior to clear fault/warning bit after fetching data if
fault/warning bit was set. This allows to get fresh data in next read.
Signed-off-by: Vikash Chandola <vikash.chandola@linux.intel.com>
Link: https://lore.kernel.org/r/20220222131253.2426834-1-vikash.chandola@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80808768e41324d2e23de89972b5406c1020e6e4 ]
After slave abort, all DMA should be stopped, or it will affect the
next transmission and maybe abort again.
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Link: https://lore.kernel.org/r/20220216014028.8123-3-jon.lin@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9382df0a98aad5bbcd4d634790305a1d786ad224 ]
Get num-cs u32 from dts of_node property rather than u16.
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Link: https://lore.kernel.org/r/20220216014028.8123-2-jon.lin@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7e75016a0753c24d6c995bc02501ae35368e333 ]
Add a test that validates that timer value is not overwritten when doing
a copy_map_value call in the kernel. Without the prior fix, this test
triggers a crash.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220209070324.1093182-3-memxor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00b022f8f876a3a036b0df7f971001bef6398605 ]
Some of the bcmgenet platforms don't correctly support WOL, yet
ethtool returns:
"Supports Wake-on: gsf"
which is false.
Ideally if there isn't a wol_irq, or there is something else that
keeps the device from being able to wakeup it should display:
"Supports Wake-on: d"
This patch checks whether the device can wakup, before using the
hard-coded supported flags. This corrects the ethtool reporting, as
well as the WOL configuration because ethtool verifies that the mode
is supported before attempting it.
Fixes: c51de7f3976b ("net: bcmgenet: add Wake-on-LAN support code")
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220310045535.224450-1-jeremy.linton@arm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ac5b58e645c66932438bb021cb5b52097ce70b0 ]
The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.
Fixes: 7349a74ea75c ("net: ethernet: gianfar_ethtool: get phc index through drvdata")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20220310015313.14938-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03fe003547975680fdb9ff5ab0e41cb68276c4f2 ]
This works around an issue with the hardware where both OE and
DAT are exposed in the same register. If both are updated
simultaneously, the harware makes no guarantees that OE or DAT
will actually change in any given order and may result in a
glitch of a few ns on a GPIO pin when changing direction and value
in a single write.
Setting direction to input now only affects OE bit. Setting
direction to output updates DAT first, then OE.
Fixes: 9c6686322d74 ("gpio: add Technologic I2C-FPGA gpio support")
Signed-off-by: Mark Featherston <mark@embeddedTS.com>
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18dfc667550fe9c032a6dcc3402b50e691e18029 ]
The cleanup() function takes care of killing processes launched by the
test functions. It relies on variables like ${tcpdump_pids} to get the
relevant PIDs. But tests are run in their own subshell, so updated
*_pids values are invisible to other shells. Therefore cleanup() never
sees any process to kill:
$ ./tools/testing/selftests/net/pmtu.sh -t pmtu_ipv4_exception
TEST: ipv4: PMTU exceptions [ OK ]
TEST: ipv4: PMTU exceptions - nexthop objects [ OK ]
$ pgrep -af tcpdump
6084 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap
6085 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap
6086 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap
6087 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap
6088 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap
6089 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap
6090 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap
6091 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap
6228 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap
6229 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap
6230 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap
6231 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap
6232 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap
6233 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap
6234 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap
6235 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap
Fix this by running cleanup() in the context of the test subshell.
Now that each test cleans the environment after completion, there's no
need for calling cleanup() again when the next test starts. So let's
drop it from the setup() function. This is okay because cleanup() is
also called when pmtu.sh starts, so even the first test starts in a
clean environment.
Also, use tcpdump's immediate mode. Otherwise it might not have time to
process buffered packets, resulting in missing packets or even empty
pcap files for short tests.
Note: PAUSE_ON_FAIL is still evaluated before cleanup(), so one can
still inspect the test environment upon failure when using -p.
Fixes: a92a0a7b8e7c ("selftests: pmtu: Simplify cleanup and namespace names")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad11c4f1d8fd1f03639460e425a36f7fd0ea83f5 ]
There could be multiple multipath entries but changing the port affinity
for each one doesn't make much sense and there should be a default one.
So only track the entry with lowest priority value.
The commit doesn't affect existing users with a single entry.
Fixes: 544fe7c2e654 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 063bd355595428750803d8736a9bb7c8db67d42d ]
Fix a refcount use after free warning due to a race on command entry.
Such race occurs when one of the commands releases its last refcount and
frees its index and entry while another process running command flush
flow takes refcount to this command entry. The process which handles
commands flush may see this command as needed to be flushed if the other
process released its refcount but didn't release the index yet. Fix it
by adding the needed spin lock.
It fixes the following warning trace:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 11 PID: 540311 at lib/refcount.c:25 refcount_warn_saturate+0x80/0xe0
...
RIP: 0010:refcount_warn_saturate+0x80/0xe0
...
Call Trace:
<TASK>
mlx5_cmd_trigger_completions+0x293/0x340 [mlx5_core]
mlx5_cmd_flush+0x3a/0xf0 [mlx5_core]
enter_error_state+0x44/0x80 [mlx5_core]
mlx5_fw_fatal_reporter_err_work+0x37/0xe0 [mlx5_core]
process_one_work+0x1be/0x390
worker_thread+0x4d/0x3d0
? rescuer_thread+0x350/0x350
kthread+0x141/0x160
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 50b2412b7e78 ("net/mlx5: Avoid possible free of command entry while timeout comp handler")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac77998b7ac3044f0509b097da9637184598980d ]
According to HW spec the field "size" should be 16 bits
in bufferx register.
Fixes: e281682bf294 ("net/mlx5_core: HW data structs/types definitions cleanup")
Signed-off-by: Mohammad Kabat <mohammadkab@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71171ac8eb34ce7fe6b3267dce27c313ab3cb3ac ]
When two ax25 devices attempted to establish connection, the requester use ax25_create(),
ax25_bind() and ax25_connect() to initiate connection. The receiver use ax25_rcv() to
accept connection and use ax25_create_cb() in ax25_rcv() to create ax25_cb, but the
ax25_cb->sk is NULL. When the receiver is detaching, a NULL pointer dereference bug
caused by sock_hold(sk) in ax25_kill_by_device() will happen. The corresponding
fail log is shown below:
===============================================================
BUG: KASAN: null-ptr-deref in ax25_device_event+0xfd/0x290
Call Trace:
...
ax25_device_event+0xfd/0x290
raw_notifier_call_chain+0x5e/0x70
dev_close_many+0x174/0x220
unregister_netdevice_many+0x1f7/0xa60
unregister_netdevice_queue+0x12f/0x170
unregister_netdev+0x13/0x20
mkiss_close+0xcd/0x140
tty_ldisc_release+0xc0/0x220
tty_release_struct+0x17/0xa0
tty_release+0x62d/0x670
...
This patch add condition check in ax25_kill_by_device(). If s->sk is
NULL, it will goto if branch to kill device.
Fixes: 4e0f718daf97 ("ax25: improve the incomplete fix to avoid UAF and NPD bugs")
Reported-by: Thomas Osterried <thomas@osterried.de>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2169b79258c8be803d2595d6456b1e77129fe154 ]
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.
Fixes: b7370112f519 ("lpc32xx: Added ethernet driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6babfc6e6fab068018c36e8f6605184b8c0b349d ]
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.
Fixes: 8a2c9a5ab4b9 ("net: ethernet: ti: cpts: rework initialization/deinitialization")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c79fcc27be90b308b3fa90811aefafdd4078668c ]
When receiving a state message, function tipc_link_validate_msg()
is called to validate its header portion. Then, its data portion
is validated before it can be accessed correctly. However, current
data sanity check is done after the message header is accessed to
update some link variables.
This commit fixes this issue by moving the data sanity check to
the beginning of state message handling and right after the header
sanity check.
Fixes: 9aa422ad3266 ("tipc: improve size validations for received domain records")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20220308021200.9245-1-tung.q.nguyen@dektech.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b19ab4b38b06aae12442b2de95ccf58b5dc53584 ]
This node pointer is returned by of_parse_phandle() with refcount
incremented in this function. Calling of_node_put() to avoid the
refcount leak. As the remove function do.
Fixes: 5cdaaa12866e ("net: emaclite: adding MDIO and phy lib support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220308024751.2320-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad35ffa252af67d4cc7c744b9377a2b577748e3f ]
Change curr_link_speed advertised speed, due to
link_info.link_speed is not equal phy.curr_user_speed_req.
Without this patch it is impossible to set advertised
speed to same as link_speed.
Testing Hints: Try to set advertised speed
to 25G only with 25G default link (use ethtool -s 0x80000000)
Fixes: 48cb27f2fd18 ("ice: Implement handlers for ethtool PHY/link operations")
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0be39bb4c7c8c358f7baf10296db2426f7cf814c ]
In ice_set_link_ksettings, change 'abilities' to 'phy_caps' and 'p' to
'pi'. This is more consistent with similar usages elsewhere in the
driver.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd3dc1655eda6173566d56eaeb54f27ab4c9e33c ]
The loop checking for PF VSI doesn't make any sense. The VSI type
backing the netdev passed to ice_set_link_ksettings will always be
of type ICE_PF_VSI. Remove it.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6730a871e68f10c786cdee59aebd6f92d49d249 ]
For get PHY abilities AQ, the specification defines "report modes"
as "with media", "without media" and "active configuration". For
clarity, rename macros to align with the specification.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79498d5af8e458102242d1667cf44df1f1564e63 ]
The ice_vc_send_msg_to_vf function has logic to detect "failure"
responses being sent to a VF. If a VF is sent more than
ICE_DFLT_NUM_INVAL_MSGS_ALLOWED then the VF is marked as disabled.
Almost identical logic also existed in the i40e driver.
This logic was added to the ice driver in commit 1071a8358a28 ("ice:
Implement virtchnl commands for AVF support") which itself copied from
the i40e implementation in commit 5c3c48ac6bf5 ("i40e: implement virtual
device interface").
Neither commit provides a proper explanation or justification of the
check. In fact, later commits to i40e changed the logic to allow
bypassing the check in some specific instances.
The "logic" for this seems to be that error responses somehow indicate a
malicious VF. This is not really true. The PF might be sending an error
for any number of reasons such as lack of resources, etc.
Additionally, this causes the PF to log an info message for every failed
VF response which may confuse users, and can spam the kernel log.
This behavior is not documented as part of any requirement for our
products and other operating system drivers such as the FreeBSD
implementation of our drivers do not include this type of check.
In fact, the change from dev_err to dev_info in i40e commit 18b7af57d9c1
("i40e: Lower some message levels") explains that these messages
typically don't actually indicate a real issue. It is quite likely that
a user who hits this in practice will be very confused as the VF will be
disabled without an obvious way to recover.
We already have robust malicious driver detection logic using actual
hardware detection mechanisms that detect and prevent invalid device
usage. Remove the logic since its not a documented requirement and the
behavior is not intuitive.
Fixes: 1071a8358a28 ("ice: Implement virtchnl commands for AVF support")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5710ab79166504013f7c0ae6a57e7d2fd26e5c43 ]
The i40e_vc_send_msg_to_vf_ex (and its wrapper i40e_vc_send_msg_to_vf)
function has logic to detect "failure" responses sent to the VF. If a VF
is sent more than I40E_DEFAULT_NUM_INVALID_MSGS_ALLOWED, then the VF is
marked as disabled. In either case, a dev_info message is printed
stating that a VF opcode failed.
This logic originates from the early implementation of VF support in
commit 5c3c48ac6bf5 ("i40e: implement virtual device interface").
That commit did not go far enough. The "logic" for this behavior seems
to be that error responses somehow indicate a malicious VF. This is not
really true. The PF might be sending an error for any number of reasons
such as lacking resources, an unsupported operation, etc. This does not
indicate a malicious VF. We already have a separate robust malicious VF
detection which relies on hardware logic to detect and prevent a variety
of behaviors.
There is no justification for this behavior in the original
implementation. In fact, a later commit 18b7af57d9c1 ("i40e: Lower some
message levels") reduced the opcode failure message from a dev_err to a
dev_info. In addition, recent commit 01cbf50877e6 ("i40e: Fix to not
show opcode msg on unsuccessful VF MAC change") changed the logic to
allow quieting it for expected failures.
That commit prevented this logic from kicking in for specific
circumstances. This change did not go far enough. The behavior is not
documented nor is it part of any requirement for our products. Other
operating systems such as the FreeBSD implementation of our driver do
not include this logic.
It is clear this check does not make sense, and causes problems which
led to ugly workarounds.
Fix this by just removing the entire logic and the need for the
i40e_vc_send_msg_to_vf_ex function.
Fixes: 01cbf50877e6 ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change")
Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f6edb6bcb2f3f41d876e0eba2ba97f87a0296ea ]
Requesting quad mode for the FMC resulted in an error:
&fmc {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fwqspi_default>'
[ 0.742963] aspeed-g6-pinctrl 1e6e2000.syscon:pinctrl: invalid function FWQSPID in map table

This is because the quad mode pins are a group of pins, not a function.
After applying this patch we can request the pins and the QSPI data
lines are muxed:
# cat /sys/kernel/debug/pinctrl/1e6e2000.syscon\:pinctrl-aspeed-g6-pinctrl/pinmux-pins |grep 1e620000.spi
pin 196 (AE12): device 1e620000.spi function FWSPID group FWQSPID
pin 197 (AF12): device 1e620000.spi function FWSPID group FWQSPID
pin 240 (Y1): device 1e620000.spi function FWSPID group FWQSPID
pin 241 (Y2): device 1e620000.spi function FWSPID group FWQSPID
pin 242 (Y3): device 1e620000.spi function FWSPID group FWQSPID
pin 243 (Y4): device 1e620000.spi function FWSPID group FWQSPID
Fixes: f510f04c8c83 ("ARM: dts: aspeed: Add AST2600 pinmux nodes")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20220304011010.974863-1-joel@jms.id.au
Link: https://lore.kernel.org/r/20220304011010.974863-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5417cbf7ab5df1632e68fe7d9e6331fc0e7dbd6 ]
Discussing one of the tests in mt753x_phylink_validate() with Landen
Chao confirms that the "||" should be "&&". Fix this.
Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1nRCF0-00CiXD-7q@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9470c29faa91c804aa04de4c10634bf02462bfa5 ]
It turns out that DE3 manual has inverted YUV and YVU format numbers for
P010 and P210. Invert them.
This was tested by playing video decoded to P010 and additionally
confirmed by looking at BSP driver source.
Fixes: 169ca4b38932 ("drm/sun4i: Add separate DE3 VI layer formats")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220228181436.1424550-1-jernej.skrabec@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9dc0c84ad2d4cc911ba252c973d1bf18d5eb9cf ]
Clang static analysis reports this issue
qed_sriov.c:4727:19: warning: Assigned value is
garbage or undefined
ivi->max_tx_rate = tx_rate ? tx_rate : link.speed;
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
link is only sometimes set by the call to qed_iov_get_link()
qed_iov_get_link fails without setting link or returning
status. So change the decl to return status.
Fixes: 73390ac9d82b ("qed*: support ndo_get_vf_config")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
