1014505 Commits

Author SHA1 Message Date
Pablo Neira Ayuso
e31f072ffa netfilter: nf_tables: do not allow to delete table with owner by handle
nft_table_lookup_byhandle() also needs to validate the netlink PortID
owner when deleting a table by handle.

Fixes: 6001a930ce03 ("netfilter: nftables: introduce table ownership")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-06-22 12:15:05 +02:00
Pablo Neira Ayuso
534799097a netfilter: nf_tables: skip netlink portID validation if zero
nft_table_lookup() allows us to obtain the table object by the name and
the family. The netlink portID validation needs to be skipped for the
dump path, since the ownership only applies to commands to update the
given table. Skip validation if the specified netlink PortID is zero
when calling nft_table_lookup().

Fixes: 6001a930ce03 ("netfilter: nftables: introduce table ownership")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-06-22 12:08:04 +02:00
Pablo Neira Ayuso
ea45fdf82c netfilter: nf_tables_offload: check FLOW_DISSECTOR_KEY_BASIC in VLAN transfer logic
The VLAN transfer logic should actually check for
FLOW_DISSECTOR_KEY_BASIC, not FLOW_DISSECTOR_KEY_CONTROL. Moreover, do
not fallback to case 2) .n_proto is set to 802.1q or 802.1ad, if
FLOW_DISSECTOR_KEY_BASIC is unset.

Fixes: 783003f3bb8a ("netfilter: nftables_offload: special ethertype handling for VLAN")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-06-21 22:26:19 +02:00
Pablo Neira Ayuso
3c5e446220 netfilter: nf_tables: memleak in hw offload abort path
Release flow from the abort path, this is easy to reproduce since
b72920f6e4a9 ("netfilter: nftables: counter hardware offload support").
If the preparation phase fails, then the abort path is exercised without
releasing the flow rule object.

unreferenced object 0xffff8881f0fa7700 (size 128):
  comm "nft", pid 1335, jiffies 4294931120 (age 4163.740s)
  hex dump (first 32 bytes):
    08 e4 de 13 82 88 ff ff 98 e4 de 13 82 88 ff ff  ................
    48 e4 de 13 82 88 ff ff 01 00 00 00 00 00 00 00  H...............
  backtrace:
    [<00000000634547e7>] flow_rule_alloc+0x26/0x80
    [<00000000c8426156>] nft_flow_rule_create+0xc9/0x3f0 [nf_tables]
    [<0000000075ff8e46>] nf_tables_newrule+0xc79/0x10a0 [nf_tables]
    [<00000000ba65e40e>] nfnetlink_rcv_batch+0xaac/0xf90 [nfnetlink]
    [<00000000505c614a>] nfnetlink_rcv+0x1bb/0x1f0 [nfnetlink]
    [<00000000eb78e1fe>] netlink_unicast+0x34b/0x480
    [<00000000a8f72c94>] netlink_sendmsg+0x3af/0x690
    [<000000009cb1ddf4>] sock_sendmsg+0x96/0xa0
    [<0000000039d06e44>] ____sys_sendmsg+0x3fe/0x440
    [<00000000137e82ca>] ___sys_sendmsg+0xd8/0x140
    [<000000000c6bf6a6>] __sys_sendmsg+0xb3/0x130
    [<0000000043bd6268>] do_syscall_64+0x40/0xb0
    [<00000000afdebc2d>] entry_SYSCALL_64_after_hwframe+0x44/0xae

Remove flow rule release from the offload commit path, otherwise error
from the offload commit phase might trigger a double-free due to the
execution of the abort_offload -> abort. After this patch, the abort
path takes care of releasing the flow rule.

This fix also needs to move the nft_flow_rule_create() call before the
transaction object is added otherwise the abort path might find a NULL
pointer to the flow rule object for the NFT_CHAIN_HW_OFFLOAD case.

While at it, rename BASIC-like goto tags to slightly more meaningful
names rather than adding a new "err3" tag.

Fixes: 63b48c73ff56 ("netfilter: nf_tables_offload: undo updates if transaction fails")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-06-21 22:23:38 +02:00
Pablo Neira Ayuso
52f0f4e178 netfilter: nft_tproxy: restrict support to TCP and UDP transport protocols
Add unfront check for TCP and UDP packets before performing further
processing.

Fixes: 4ed8eb6570a4 ("netfilter: nf_tables: Add native tproxy support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-06-16 20:51:51 +02:00
Pablo Neira Ayuso
8f518d43f8 netfilter: nft_osf: check for TCP packet before further processing
The osf expression only supports for TCP packets, add a upfront sanity
check to skip packet parsing if this is not a TCP packet.

Fixes: b96af92d6eaf ("netfilter: nf_tables: implement Passive OS fingerprint module in nft_osf")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-06-16 20:51:50 +02:00
Pablo Neira Ayuso
cdd73cc545 netfilter: nft_exthdr: check for IPv6 packet before further processing
ipv6_find_hdr() does not validate that this is an IPv6 packet. Add a
sanity check for calling ipv6_find_hdr() to make sure an IPv6 packet
is passed for parsing.

Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-06-16 20:51:50 +02:00
Nicolas Dichtel
8744365e25 MAINTAINERS: netfilter: add irc channel
The community #netfilter IRC channel is now live on the libera.chat network
(https://libera.chat/).

CC: Arturo Borrero Gonzalez <arturo@netfilter.org>
Link: https://marc.info/?l=netfilter&m=162210948632717
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-06-16 20:51:50 +02:00
David S. Miller
a4f0377db1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2021-06-15

The following pull-request contains BPF updates for your *net* tree.

We've added 5 non-merge commits during the last 11 day(s) which contain
a total of 10 files changed, 115 insertions(+), 16 deletions(-).

The main changes are:

1) Fix marking incorrect umem ring as done in libbpf's
   xsk_socket__create_shared() helper, from Kev Jackson.

2) Fix oob leakage under a spectre v1 type confusion
   attack, from Daniel Borkmann.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15 15:26:07 -07:00
Aleksander Jan Bajkowski
7ea6cd16f1 lantiq: net: fix duplicated skb in rx descriptor ring
The previous commit didn't fix the bug properly. By mistake, it replaces
the pointer of the next skb in the descriptor ring instead of the current
one. As a result, the two descriptors are assigned the same SKB. The error
is seen during the iperf test when skb_put tries to insert a second packet
and exceeds the available buffer.

Fixes: c7718ee96dbc ("net: lantiq: fix memory corruption in RX ring ")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15 14:17:19 -07:00
Kristian Evensen
057d49334c qmi_wwan: Do not call netif_rx from rx_fixup
When the QMI_WWAN_FLAG_PASS_THROUGH is set, netif_rx() is called from
qmi_wwan_rx_fixup(). When the call to netif_rx() is successful (which is
most of the time), usbnet_skb_return() is called (from rx_process()).
usbnet_skb_return() will then call netif_rx() a second time for the same
skb.

Simplify the code and avoid the redundant netif_rx() call by changing
qmi_wwan_rx_fixup() to always return 1 when QMI_WWAN_FLAG_PASS_THROUGH
is set. We then leave it up to the existing infrastructure to call
netif_rx().

Suggested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15 11:29:28 -07:00
Maciej Żenczykowski
c1a3d40673 net: cdc_ncm: switch to eth%d interface naming
This is meant to make the host side cdc_ncm interface consistently
named just like the older CDC protocols: cdc_ether & cdc_ecm
(and even rndis_host), which all use 'FLAG_ETHER | FLAG_POINTTOPOINT'.

include/linux/usb/usbnet.h:
  #define FLAG_ETHER	0x0020		/* maybe use "eth%d" names */
  #define FLAG_WLAN	0x0080		/* use "wlan%d" names */
  #define FLAG_WWAN	0x0400		/* use "wwan%d" names */
  #define FLAG_POINTTOPOINT 0x1000	/* possibly use "usb%d" names */

drivers/net/usb/usbnet.c @ line 1711:
  strcpy (net->name, "usb%d");
  ...
  // heuristic:  "usb%d" for links we know are two-host,
  // else "eth%d" when there's reasonable doubt.  userspace
  // can rename the link if it knows better.
  if ((dev->driver_info->flags & FLAG_ETHER) != 0 &&
      ((dev->driver_info->flags & FLAG_POINTTOPOINT) == 0 ||
       (net->dev_addr [0] & 0x02) == 0))
          strcpy (net->name, "eth%d");
  /* WLAN devices should always be named "wlan%d" */
  if ((dev->driver_info->flags & FLAG_WLAN) != 0)
          strcpy(net->name, "wlan%d");
  /* WWAN devices should always be named "wwan%d" */
  if ((dev->driver_info->flags & FLAG_WWAN) != 0)
          strcpy(net->name, "wwan%d");

So by using ETHER | POINTTOPOINT the interface naming is
either usb%d or eth%d based on the global uniqueness of the
mac address of the device.

Without this 2.5gbps ethernet dongles which all seem to use the cdc_ncm
driver end up being called usb%d instead of eth%d even though they're
definitely not two-host.  (All 1gbps & 5gbps ethernet usb dongles I've
tested don't hit this problem due to use of different drivers, primarily
r8152 and aqc111)

Fixes tag is based purely on git blame, and is really just here to make
sure this hits LTS branches newer than v4.5.

Cc: Lorenzo Colitti <lorenzo@google.com>
Fixes: 4d06dd537f95 ("cdc_ncm: do not call usbnet_link_change from cdc_ncm_bind")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15 11:24:57 -07:00
Changbin Du
e34492dea6 net: inline function get_net_ns_by_fd if NET_NS is disabled
The function get_net_ns_by_fd() could be inlined when NET_NS is not
enabled.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15 11:00:45 -07:00
Jakub Kicinski
475b92f932 ptp: improve max_adj check against unreasonable values
Scaled PPM conversion to PPB may (on 64bit systems) result
in a value larger than s32 can hold (freq/scaled_ppm is a long).
This means the kernel will not correctly reject unreasonably
high ->freq values (e.g. > 4294967295ppb, 281474976645 scaled PPM).

The conversion is equivalent to a division by ~66 (65.536),
so the value of ppb is always smaller than ppm, but not small
enough to assume narrowing the type from long -> s32 is okay.

Note that reasonable user space (e.g. ptp4l) will not use such
high values, anyway, 4289046510ppb ~= 4.3x, so the fix is
somewhat pedantic.

Fixes: d39a743511cd ("ptp: validate the requested frequency adjustment.")
Fixes: d94ba80ebbea ("ptp: Added a brand new class driver for ptp clocks.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15 10:59:46 -07:00
Subash Abhinov Kasiviswanathan
2214fb5300 net: mhi_net: Update the transmit handler prototype
Update the function prototype of mhi_ndo_xmit to match
ndo_start_xmit. This otherwise leads to run time failures when
CFI is enabled in kernel.

Fixes: 3ffec6a14f24 ("net: Add mhi-net driver")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-14 14:13:09 -07:00
Daniel Borkmann
973377ffe8 bpf, selftests: Adjust few selftest outcomes wrt unreachable code
In almost all cases from test_verifier that have been changed in here, we've
had an unreachable path with a load from a register which has an invalid
address on purpose. This was basically to make sure that we never walk this
path and to have the verifier complain if it would otherwise. Change it to
match on the right error for unprivileged given we now test these paths
under speculative execution.

There's one case where we match on exact # of insns_processed. Due to the
extra path, this will of course mismatch on unprivileged. Thus, restrict the
test->insn_processed check to privileged-only.

In one other case, we result in a 'pointer comparison prohibited' error. This
is similarly due to verifying an 'invalid' branch where we end up with a value
pointer on one side of the comparison.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
2021-06-14 23:06:38 +02:00
Daniel Borkmann
9183671af6 bpf: Fix leakage under speculation on mispredicted branches
The verifier only enumerates valid control-flow paths and skips paths that
are unreachable in the non-speculative domain. And so it can miss issues
under speculative execution on mispredicted branches.

For example, a type confusion has been demonstrated with the following
crafted program:

  // r0 = pointer to a map array entry
  // r6 = pointer to readable stack slot
  // r9 = scalar controlled by attacker
  1: r0 = *(u64 *)(r0) // cache miss
  2: if r0 != 0x0 goto line 4
  3: r6 = r9
  4: if r0 != 0x1 goto line 6
  5: r9 = *(u8 *)(r6)
  6: // leak r9

Since line 3 runs iff r0 == 0 and line 5 runs iff r0 == 1, the verifier
concludes that the pointer dereference on line 5 is safe. But: if the
attacker trains both the branches to fall-through, such that the following
is speculatively executed ...

  r6 = r9
  r9 = *(u8 *)(r6)
  // leak r9

... then the program will dereference an attacker-controlled value and could
leak its content under speculative execution via side-channel. This requires
to mistrain the branch predictor, which can be rather tricky, because the
branches are mutually exclusive. However such training can be done at
congruent addresses in user space using different branches that are not
mutually exclusive. That is, by training branches in user space ...

  A:  if r0 != 0x0 goto line C
  B:  ...
  C:  if r0 != 0x0 goto line D
  D:  ...

... such that addresses A and C collide to the same CPU branch prediction
entries in the PHT (pattern history table) as those of the BPF program's
lines 2 and 4, respectively. A non-privileged attacker could simply brute
force such collisions in the PHT until observing the attack succeeding.

Alternative methods to mistrain the branch predictor are also possible that
avoid brute forcing the collisions in the PHT. A reliable attack has been
demonstrated, for example, using the following crafted program:

  // r0 = pointer to a [control] map array entry
  // r7 = *(u64 *)(r0 + 0), training/attack phase
  // r8 = *(u64 *)(r0 + 8), oob address
  // [...]
  // r0 = pointer to a [data] map array entry
  1: if r7 == 0x3 goto line 3
  2: r8 = r0
  // crafted sequence of conditional jumps to separate the conditional
  // branch in line 193 from the current execution flow
  3: if r0 != 0x0 goto line 5
  4: if r0 == 0x0 goto exit
  5: if r0 != 0x0 goto line 7
  6: if r0 == 0x0 goto exit
  [...]
  187: if r0 != 0x0 goto line 189
  188: if r0 == 0x0 goto exit
  // load any slowly-loaded value (due to cache miss in phase 3) ...
  189: r3 = *(u64 *)(r0 + 0x1200)
  // ... and turn it into known zero for verifier, while preserving slowly-
  // loaded dependency when executing:
  190: r3 &= 1
  191: r3 &= 2
  // speculatively bypassed phase dependency
  192: r7 += r3
  193: if r7 == 0x3 goto exit
  194: r4 = *(u8 *)(r8 + 0)
  // leak r4

As can be seen, in training phase (phase != 0x3), the condition in line 1
turns into false and therefore r8 with the oob address is overridden with
the valid map value address, which in line 194 we can read out without
issues. However, in attack phase, line 2 is skipped, and due to the cache
miss in line 189 where the map value is (zeroed and later) added to the
phase register, the condition in line 193 takes the fall-through path due
to prior branch predictor training, where under speculation, it'll load the
byte at oob address r8 (unknown scalar type at that point) which could then
be leaked via side-channel.

One way to mitigate these is to 'branch off' an unreachable path, meaning,
the current verification path keeps following the is_branch_taken() path
and we push the other branch to the verification stack. Given this is
unreachable from the non-speculative domain, this branch's vstate is
explicitly marked as speculative. This is needed for two reasons: i) if
this path is solely seen from speculative execution, then we later on still
want the dead code elimination to kick in in order to sanitize these
instructions with jmp-1s, and ii) to ensure that paths walked in the
non-speculative domain are not pruned from earlier walks of paths walked in
the speculative domain. Additionally, for robustness, we mark the registers
which have been part of the conditional as unknown in the speculative path
given there should be no assumptions made on their content.

The fix in here mitigates type confusion attacks described earlier due to
i) all code paths in the BPF program being explored and ii) existing
verifier logic already ensuring that given memory access instruction
references one specific data structure.

An alternative to this fix that has also been looked at in this scope was to
mark aux->alu_state at the jump instruction with a BPF_JMP_TAKEN state as
well as direction encoding (always-goto, always-fallthrough, unknown), such
that mixing of different always-* directions themselves as well as mixing of
always-* with unknown directions would cause a program rejection by the
verifier, e.g. programs with constructs like 'if ([...]) { x = 0; } else
{ x = 1; }' with subsequent 'if (x == 1) { [...] }'. For unprivileged, this
would result in only single direction always-* taken paths, and unknown taken
paths being allowed, such that the former could be patched from a conditional
jump to an unconditional jump (ja). Compared to this approach here, it would
have two downsides: i) valid programs that otherwise are not performing any
pointer arithmetic, etc, would potentially be rejected/broken, and ii) we are
required to turn off path pruning for unprivileged, where both can be avoided
in this work through pushing the invalid branch to the verification stack.

The issue was originally discovered by Adam and Ofek, and later independently
discovered and reported as a result of Benedict and Piotr's research work.

Fixes: b2157399cc98 ("bpf: prevent out-of-bounds speculation")
Reported-by: Adam Morrison <mad@cs.tau.ac.il>
Reported-by: Ofek Kirzner <ofekkir@gmail.com>
Reported-by: Benedict Schlueter <benedict.schlueter@rub.de>
Reported-by: Piotr Krysiuk <piotras@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Benedict Schlueter <benedict.schlueter@rub.de>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
2021-06-14 23:06:10 +02:00
Daniel Borkmann
fe9a5ca7e3 bpf: Do not mark insn as seen under speculative path verification
... in such circumstances, we do not want to mark the instruction as seen given
the goal is still to jmp-1 rewrite/sanitize dead code, if it is not reachable
from the non-speculative path verification. We do however want to verify it for
safety regardless.

With the patch as-is all the insns that have been marked as seen before the
patch will also be marked as seen after the patch (just with a potentially
different non-zero count). An upcoming patch will also verify paths that are
unreachable in the non-speculative domain, hence this extension is needed.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Benedict Schlueter <benedict.schlueter@rub.de>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
2021-06-14 23:06:06 +02:00
Daniel Borkmann
d203b0fd86 bpf: Inherit expanded/patched seen count from old aux data
Instead of relying on current env->pass_cnt, use the seen count from the
old aux data in adjust_insn_aux_data(), and expand it to the new range of
patched instructions. This change is valid given we always expand 1:n
with n>=1, so what applies to the old/original instruction needs to apply
for the replacement as well.

Not relying on env->pass_cnt is a prerequisite for a later change where we
want to avoid marking an instruction seen when verified under speculative
execution path.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Benedict Schlueter <benedict.schlueter@rub.de>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
2021-06-14 23:06:00 +02:00
David S. Miller
45deacc731 bluetooth pull request for net:
- Fix crash on SMP when debug is enabled
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE7E6oRXp8w05ovYr/9JCA4xAyCykFAmDHvYgZHGx1aXoudm9u
 LmRlbnR6QGludGVsLmNvbQAKCRD0kIDjEDILKWg3D/4vIihzTyD9Hjr5/RVyFz0Z
 1NRsCzEjXbnAu2bBh0YyXmLW4b6Wkxlcs4/P393bEpFK4fur3al5MXEE2dBqWDjE
 FqDlSbLgkfjVkQlTi+FKqAnt4NaHtOS6356h8a8ZVQOFPMXszt1etbp/Le+93OQZ
 6vsFCv90ugArIjjEqdZHl6KjZMZywltDmJWI8xtjB7/hpeHF5ukAmA4UAkb0kUuz
 ZSJz73cjfb5PMzlOd6rJIkoaMxT5aKgE9YeVAh2HhMoMU7TdDGGoMADVFnpcABa6
 q/EJL0URziqYT6xrrYTPI5gEkXvIaJmB4uFlIR/eYvBuFUsmoRf/bPcsAaID/Zcg
 LK0zNR/RM6NQTgkR4u9lziavs4z/T4VfOIrIIXgnKi9sYSC2sur3UklvylwODzHT
 El/uF/5swifBRCVzgEcdrntNLPHYWdskvPPo+Z0dOsHk/FjcwjaBlbNtaKpUB7bY
 xnP7nyTpWvLqJy6GdKyqHUf9Va35Yn3Hv7BzMI9fhEhdNNrCeyn3zJnJaweZkROk
 Ivl1pf3RiDLLblRDHh3Zj5w/XhypLiSj9aMfF65MpX6/AtAc0UlOb65b3D9wx6mZ
 8uDfhwXc/rpKOGDiglKQ7ytKB+UrZsg2bm836KayfSarexfoK/Z3sNAEdFKt0RMB
 auLejRsqudsxpftZ4MFxYg==
 =5x19
 -----END PGP SIGNATURE-----

Merge tag 'for-net-2021-06-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - Fix crash on SMP when debug is enabled
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-14 14:00:57 -07:00
Luiz Augusto von Dentz
995fca15b7 Bluetooth: SMP: Fix crash when receiving new connection when debug is enabled
When receiving a new connection pchan->conn won't be initialized so the
code cannot use bt_dev_dbg as the pointer to hci_dev won't be
accessible.

Fixes: 2e1614f7d61e4 ("Bluetooth: SMP: Convert BT_ERR/BT_DBG to bt_dev_err/bt_dev_dbg")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-14 22:16:27 +02:00
Pavel Skripkin
ad9d24c942 net: qrtr: fix OOB Read in qrtr_endpoint_post
Syzbot reported slab-out-of-bounds Read in
qrtr_endpoint_post. The problem was in wrong
_size_ type:

	if (len != ALIGN(size, 4) + hdrlen)
		goto err;

If size from qrtr_hdr is 4294967293 (0xfffffffd), the result of
ALIGN(size, 4) will be 0. In case of len == hdrlen and size == 4294967293
in header this check won't fail and

	skb_put_data(skb, data + hdrlen, size);

will read out of bound from data, which is hdrlen allocated block.

Fixes: 194ccc88297a ("net: qrtr: Support decoding incoming v2 packets")
Reported-and-tested-by: syzbot+1917d778024161609247@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-14 13:01:26 -07:00
David Ahern
b87b04f501 ipv4: Fix device used for dst_alloc with local routes
Oliver reported a use case where deleting a VRF device can hang
waiting for the refcnt to drop to 0. The root cause is that the dst
is allocated against the VRF device but cached on the loopback
device.

The use case (added to the selftests) has an implicit VRF crossing
due to the ordering of the FIB rules (lookup local is before the
l3mdev rule, but the problem occurs even if the FIB rules are
re-ordered with local after l3mdev because the VRF table does not
have a default route to terminate the lookup). The end result is
is that the FIB lookup returns the loopback device as the nexthop,
but the ingress device is in a VRF. The mismatch causes the dst
alloc against the VRF device but then cached on the loopback.

The fix is to bring the trick used for IPv6 (see ip6_rt_get_dev_rcu):
pick the dst alloc device based the fib lookup result but with checks
that the result has a nexthop device (e.g., not an unreachable or
prohibit entry).

Fixes: f5a0aab84b74 ("net: ipv4: dst for local input routes should use l3mdev if relevant")
Reported-by: Oliver Herms <oliver.peter.herms@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-14 12:30:53 -07:00
Pavel Skripkin
58af3d3d54 net: caif: fix memory leak in ldisc_open
Syzbot reported memory leak in tty_init_dev().
The problem was in unputted tty in ldisc_open()

static int ldisc_open(struct tty_struct *tty)
{
...
	ser->tty = tty_kref_get(tty);
...
	result = register_netdevice(dev);
	if (result) {
		rtnl_unlock();
		free_netdev(dev);
		return -ENODEV;
	}
...
}

Ser pointer is netdev private_data, so after free_netdev()
this pointer goes away with unputted tty reference. So, fix
it by adding tty_kref_put() before freeing netdev.

Reported-and-tested-by: syzbot+f303e045423e617d2cad@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-14 12:28:16 -07:00
Rahul Lakkireddy
09427c1915 cxgb4: fix wrong ethtool n-tuple rule lookup
The TID returned during successful filter creation is relative to
the region in which the filter is created. Using it directly always
returns Hi Prio/Normal filter region's entry for the first couple of
entries, even though the rule is actually inserted in Hash region.
Fix by analyzing in which region the filter has been inserted and
save the absolute TID to be used for lookup later.

Fixes: db43b30cd89c ("cxgb4: add ethtool n-tuple filter deletion")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-14 12:17:57 -07:00
Christophe JAILLET
49a10c7b17 netxen_nic: Fix an error handling path in 'netxen_nic_probe()'
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.

Fixes: e87ad5539343 ("netxen: support pci error handlers")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-14 12:17:01 -07:00
Christophe JAILLET
cb3376604a qlcnic: Fix an error handling path in 'qlcnic_probe()'
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.

Fixes: 451724c821c1 ("qlcnic: aer support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-14 12:16:07 -07:00
Jakub Kicinski
e175aef902 ethtool: strset: fix message length calculation
Outer nest for ETHTOOL_A_STRSET_STRINGSETS is not accounted for.
This may result in ETHTOOL_MSG_STRSET_GET producing a warning like:

    calculated message payload length (684) not sufficient
    WARNING: CPU: 0 PID: 30967 at net/ethtool/netlink.c:369 ethnl_default_doit+0x87a/0xa20

and a splat.

As usually with such warnings three conditions must be met for the warning
to trigger:
 - there must be no skb size rounding up (e.g. reply_size of 684);
 - string set must be per-device (so that the header gets populated);
 - the device name must be at least 12 characters long.

all in all with current user space it looks like reading priv flags
is the only place this could potentially happen. Or with syzbot :)

Reported-by: syzbot+59aa77b92d06cd5a54f2@syzkaller.appspotmail.com
Fixes: 71921690f974 ("ethtool: provide string sets with STRSET_GET request")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-14 12:14:24 -07:00
Alex Elder
994c393bb6 net: qualcomm: rmnet: don't over-count statistics
The purpose of the loop using u64_stats_fetch_*_irq() is to ensure
statistics on a given CPU are collected atomically. If one of the
statistics values gets updated within the begin/retry window, the
loop will run again.

Currently the statistics totals are updated inside that window.
This means that if the loop ever retries, the statistics for the
CPU will be counted more than once.

Fix this by taking a snapshot of a CPU's statistics inside the
protected window, and then updating the counters with the snapshot
values after exiting the loop.

(Also add a newline at the end of this file...)

Fixes: 192c4b5d48f2a ("net: qualcomm: rmnet: Add support for 64 bit stats")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-14 12:13:38 -07:00
Tyson Moore
4f667b8e04 sch_cake: revise docs for RFC 8622 LE PHB support
Commit b8392808eb3fc28e ("sch_cake: add RFC 8622 LE PHB support to CAKE
diffserv handling") added the LE mark to the Bulk tin. Update the
comments to reflect the change.

Signed-off-by: Tyson Moore <tyson@tyson.me>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-14 12:10:57 -07:00
Changbin Du
ea6932d70e net: make get_net_ns return error if NET_NS is disabled
There is a panic in socket ioctl cmd SIOCGSKNS when NET_NS is not enabled.
The reason is that nsfs tries to access ns->ops but the proc_ns_operations
is not implemented in this case.

[7.670023] Unable to handle kernel NULL pointer dereference at virtual address 00000010
[7.670268] pgd = 32b54000
[7.670544] [00000010] *pgd=00000000
[7.671861] Internal error: Oops: 5 [#1] SMP ARM
[7.672315] Modules linked in:
[7.672918] CPU: 0 PID: 1 Comm: systemd Not tainted 5.13.0-rc3-00375-g6799d4f2da49 #16
[7.673309] Hardware name: Generic DT based system
[7.673642] PC is at nsfs_evict+0x24/0x30
[7.674486] LR is at clear_inode+0x20/0x9c

The same to tun SIOCGSKNS command.

To fix this problem, we make get_net_ns() return -EINVAL when NET_NS is
disabled. Meanwhile move it to right place net/core/net_namespace.c.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Fixes: c62cce2caee5 ("net: add an ioctl to get a socket network namespace")
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12 13:13:08 -07:00
Jisheng Zhang
1adb20f0d4 net: stmmac: dwmac1000: Fix extended MAC address registers definition
The register starts from 0x800 is the 16th MAC address register rather
than the first one.

Fixes: cffb13f4d6fb ("stmmac: extend mac addr reg and fix perfect filering")
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 13:05:55 -07:00
David S. Miller
f4cdcae03f Merge branch 'cxgb4-fixes'
Rahul Lakkireddy says:

====================
cxgb4: bug fixes for ethtool flash ops

This series of patches add bug fixes in ethtool flash operations.

Patch 1 fixes an endianness issue when writing boot image to flash
after the device ID has been updated.

Patch 2 fixes sleep in atomic when writing PHY firmware to flash.

Patch 3 fixes issue with PHY firmware image not getting written to
flash when chip is still running.
-====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 11:15:01 -07:00
Rahul Lakkireddy
6d297540f7 cxgb4: halt chip before flashing PHY firmware image
When using firmware-assisted PHY firmware image write to flash,
halt the chip before beginning the flash write operation to allow
the running firmware to store the image persistently. Otherwise,
the running firmware will only store the PHY image in local on-chip
RAM, which will be lost after next reset.

Fixes: 4ee339e1e92a ("cxgb4: add support to flash PHY image")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 11:15:00 -07:00
Rahul Lakkireddy
f046bd0ae1 cxgb4: fix sleep in atomic when flashing PHY firmware
Before writing new PHY firmware to on-chip memory, driver queries
firmware for current running PHY firmware version, which can result
in sleep waiting for reply. So, move spinlock closer to the actual
on-chip memory write operation, instead of taking it at the callers.

Fixes: 5fff701c838e ("cxgb4: always sync access when flashing PHY firmware")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 11:15:00 -07:00
Rahul Lakkireddy
42a2039753 cxgb4: fix endianness when flashing boot image
Boot images are copied to memory and updated with current underlying
device ID before flashing them to adapter. Ensure the updated images
are always flashed in Big Endian to allow the firmware to read the
new images during boot properly.

Fixes: 550883558f17 ("cxgb4: add support to flash boot image")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 11:15:00 -07:00
Christophe JAILLET
33e381448c alx: Fix an error handling path in 'alx_probe()'
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.

Fixes: ab69bde6b2e9 ("alx: add a simple AR816x/AR817x device driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 11:12:54 -07:00
Praneeth Bajjuri
da9ef50f54 net: phy: dp83867: perform soft reset and retain established link
Current logic is performing hard reset and causing the programmed
registers to be wiped out.

as per datasheet: https://www.ti.com/lit/ds/symlink/dp83867cr.pdf
8.6.26 Control Register (CTRL)

do SW_RESTART to perform a reset not including the registers,
If performed when link is already present,
it will drop the link and trigger re-auto negotiation.

Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Geet Modi <geet.modi@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 10:13:03 -07:00
David S. Miller
232e3683b4 Merge branch 'mptcp-fixes'
Mat Martineau says:

====================
mptcp: More v5.13 fixes

Here's another batch of MPTCP fixes for v5.13.

Patch 1 cleans up memory accounting between the MPTCP-level socket and
the subflows to more reliably transfer forward allocated memory under
pressure.

Patch 2 wakes up socket readers more reliably.

Patch 3 changes a WARN_ONCE to a pr_debug.

Patch 4 changes the selftests to only use syncookies in test cases where
they do not cause spurious failures.

Patch 5 modifies socket error reporting to avoid a possible soft lockup.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 16:47:45 -07:00
Paolo Abeni
499ada5073 mptcp: fix soft lookup in subflow_error_report()
Maxim reported a soft lookup in subflow_error_report():

 watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:0]
 RIP: 0010:native_queued_spin_lock_slowpath
 RSP: 0018:ffffa859c0003bc0 EFLAGS: 00000202
 RAX: 0000000000000101 RBX: 0000000000000001 RCX: 0000000000000000
 RDX: ffff9195c2772d88 RSI: 0000000000000000 RDI: ffff9195c2772d88
 RBP: ffff9195c2772d00 R08: 00000000000067b0 R09: c6e31da9eb1e44f4
 R10: ffff9195ef379700 R11: ffff9195edb50710 R12: ffff9195c2772d88
 R13: ffff9195f500e3d0 R14: ffff9195ef379700 R15: ffff9195ef379700
 FS:  0000000000000000(0000) GS:ffff91961f400000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000000c000407000 CR3: 0000000002988000 CR4: 00000000000006f0
 Call Trace:
  <IRQ>
 _raw_spin_lock_bh
 subflow_error_report
 mptcp_subflow_data_available
 __mptcp_move_skbs_from_subflow
 mptcp_data_ready
 tcp_data_queue
 tcp_rcv_established
 tcp_v4_do_rcv
 tcp_v4_rcv
 ip_protocol_deliver_rcu
 ip_local_deliver_finish
 __netif_receive_skb_one_core
 netif_receive_skb
 rtl8139_poll 8139too
 __napi_poll
 net_rx_action
 __do_softirq
 __irq_exit_rcu
 common_interrupt
  </IRQ>

The calling function - mptcp_subflow_data_available() - can be invoked
from different contexts:
- plain ssk socket lock
- ssk socket lock + mptcp_data_lock
- ssk socket lock + mptcp_data_lock + msk socket lock.

Since subflow_error_report() tries to acquire the mptcp_data_lock, the
latter two call chains will cause soft lookup.

This change addresses the issue moving the error reporting call to
outer functions, where the held locks list is known and the we can
acquire only the needed one.

Reported-by: Maxim Galaganov <max@internet.ru>
Fixes: 15cc10453398 ("mptcp: deliver ssk errors to msk")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/199
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 16:47:45 -07:00
Paolo Abeni
2395da0e17 selftests: mptcp: enable syncookie only in absence of reorders
Syncookie validation may fail for OoO packets, causing spurious
resets and self-tests failures, so let's force syncookie only
for tests iteration with no OoO.

Fixes: fed61c4b584c ("selftests: mptcp: make 2nd net namespace use tcp syn cookies unconditionally")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/198
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 16:47:45 -07:00
Paolo Abeni
61e710227e mptcp: do not warn on bad input from the network
warn_bad_map() produces a kernel WARN on bad input coming
from the network. Use pr_debug() to avoid spamming the system
log.

Additionally, when the right bound check fails, warn_bad_map() reports
the wrong ssn value, let's fix it.

Fixes: 648ef4b88673 ("mptcp: Implement MPTCP receive path")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/107
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 16:47:45 -07:00
Paolo Abeni
99d1055ce2 mptcp: wake-up readers only for in sequence data
Currently we rely on the subflow->data_avail field, which is subject to
races:

	ssk1
		skb len = 500 DSS(seq=1, len=1000, off=0)
		# data_avail == MPTCP_SUBFLOW_DATA_AVAIL

	ssk2
		skb len = 500 DSS(seq = 501, len=1000)
		# data_avail == MPTCP_SUBFLOW_DATA_AVAIL

	ssk1
		skb len = 500 DSS(seq = 1, len=1000, off =500)
		# still data_avail == MPTCP_SUBFLOW_DATA_AVAIL,
		# as the skb is covered by a pre-existing map,
		# which was in-sequence at reception time.

Instead we can explicitly check if some has been received in-sequence,
propagating the info from __mptcp_move_skbs_from_subflow().

Additionally add the 'ONCE' annotation to the 'data_avail' memory
access, as msk will read it outside the subflow socket lock.

Fixes: 648ef4b88673 ("mptcp: Implement MPTCP receive path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 16:47:44 -07:00
Paolo Abeni
72f961320d mptcp: try harder to borrow memory from subflow under pressure
If the host is under sever memory pressure, and RX forward
memory allocation for the msk fails, we try to borrow the
required memory from the ingress subflow.

The current attempt is a bit flaky: if skb->truesize is less
than SK_MEM_QUANTUM, the ssk will not release any memory, and
the next schedule will fail again.

Instead, directly move the required amount of pages from the
ssk to the msk, if available

Fixes: 9c3f94e1681b ("mptcp: add missing memory scheduling in the rx path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 16:47:44 -07:00
David S. Miller
22488e4550 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Fix a crash when stateful expression with its own gc callback
   is used in a set definition.

2) Skip IPv6 packets from any link-local address in IPv6 fib expression.
   Add a selftest for this scenario, from Florian Westphal.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:33:56 -07:00
David S. Miller
0280f429dc Merge branch 'tcp-options-oob-fixes'
Maxim Mikityanskiy says:

====================
Fix out of bounds when parsing TCP options

This series fixes out-of-bounds access in various places in the kernel
where parsing of TCP options takes place. Fortunately, many more
occurrences don't have this bug.

v2 changes:

synproxy: Added an early return when length < 0 to avoid calling
skb_header_pointer with negative length.

sch_cake: Added doff validation to avoid parsing garbage.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:26:18 -07:00
Maxim Mikityanskiy
ba91c49ded sch_cake: Fix out of bounds when parsing TCP options and header
The TCP option parser in cake qdisc (cake_get_tcpopt and
cake_tcph_may_drop) could read one byte out of bounds. When the length
is 1, the execution flow gets into the loop, reads one byte of the
opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads
one more byte, which exceeds the length of 1.

This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack
out of bounds when parsing TCP options.").

v2 changes:

Added doff validation in cake_get_tcphdr to avoid parsing garbage as TCP
header. Although it wasn't strictly an out-of-bounds access (memory was
allocated), garbage values could be read where CAKE expected the TCP
header if doff was smaller than 5.

Cc: Young Xiao <92siuyang@gmail.com>
Fixes: 8b7138814f29 ("sch_cake: Add optional ACK filter")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:26:18 -07:00
Maxim Mikityanskiy
07718be265 mptcp: Fix out of bounds when parsing TCP options
The TCP option parser in mptcp (mptcp_get_options) could read one byte
out of bounds. When the length is 1, the execution flow gets into the
loop, reads one byte of the opcode, and if the opcode is neither
TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the
length of 1.

This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack
out of bounds when parsing TCP options.").

Cc: Young Xiao <92siuyang@gmail.com>
Fixes: cec37a6e41aa ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:26:18 -07:00
Maxim Mikityanskiy
5fc177ab75 netfilter: synproxy: Fix out of bounds when parsing TCP options
The TCP option parser in synproxy (synproxy_parse_options) could read
one byte out of bounds. When the length is 1, the execution flow gets
into the loop, reads one byte of the opcode, and if the opcode is
neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds
the length of 1.

This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack
out of bounds when parsing TCP options.").

v2 changes:

Added an early return when length < 0 to avoid calling
skb_header_pointer with negative length.

Cc: Young Xiao <92siuyang@gmail.com>
Fixes: 48b1de4c110a ("netfilter: add SYNPROXY core/target")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:26:18 -07:00
Eric Dumazet
d1b5bee4c8 net/packet: annotate data race in packet_sendmsg()
There is a known race in packet_sendmsg(), addressed
in commit 32d3182cd2cd ("net/packet: fix race in tpacket_snd()")

Now we have data_race(), we can use it to avoid a future KCSAN warning,
as syzbot loves stressing af_packet sockets :)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 14:12:54 -07:00