IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 00675017e0aeba5305665c52ded4ddce6a4c0231 upstream.
Similar to the addition of lookup_one() add a version of
lookup_one_unlocked() and lookup_one_positive_unlocked() that take
idmapped mounts into account. This is required to port overlay to
support idmapped base layers.
Cc: <linux-fsdevel@vger.kernel.org>
Tested-by: Giuseppe Scrivano <gscrivan@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b95b668eaaa2574e8ee72f143c52075e9955177e upstream.
We're only adding BCMs to the commit list in aggregate(), but there are
cases where pre_aggregate() is called without subsequently calling
aggregate(). In particular, in icc_sync_state() when a node with initial
BW has zero requests. Since BCMs aren't added to the commit list in
these cases, we don't actually send the zero BW request to HW. So the
resources remain on unnecessarily.
Add BCMs to the commit list in pre_aggregate() instead, which is always
called even when there are no requests.
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
[georgi: remove icc_sync_state for platforms with incomplete support]
Link: https://lore.kernel.org/r/20211125174751.25317-1-djakov@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f3724930eb4bba74f7d10bc3bef5bb22dd323df upstream.
The IPA BCM resource ("IP0") on sc7180 was moved to the clk-rpmh driver
in commit bcd63d222b60 ("clk: qcom: rpmh: Add IPA clock for SC7180") and
modeled as a clk, but this interconnect driver still had it modeled as
an interconnect. This was mostly OK because nobody used the interconnect
definition, until the interconnect framework started dropping bandwidth
requests on interconnects that aren't used via the sync_state callback
in commit 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state"). Once
that patch was applied the IP0 resource was going to be controlled from
two places, the clk framework and the interconnect framework.
Even then, things were probably going to be OK, because commit
b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in
pre_aggregate") was needed to actually drop bandwidth requests on unused
interconnects, of which the IPA was one of the interconnect that wasn't
getting dropped to zero. Combining the three commits together leads to
bad behavior where the interconnect framework is disabling the IP0
resource because it has no users while the clk framework thinks the IP0
resource is on because the only user, the IPA driver, has turned it on
via clk_prepare_enable(). Depending on when sync_state is called, we can
get into a situation like below:
IPA driver probes
IPA driver gets notified modem started
runtime PM get()
IPA clk enabled -> IP0 resource is ON
sync_state runs
interconnect zeroes out the IP0 resource -> IP0 resource is off
IPA driver tries to access a register and blows up
The crash is an unclocked access that manifest as an SError.
SError Interrupt on CPU0, code 0xbe000011 -- SError
CPU: 0 PID: 3595 Comm: mmdata_mgr Not tainted 5.17.1+ #166
Hardware name: Google Lazor (rev1 - 2) with LTE (DT)
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mutex_lock+0x4c/0x80
lr : mutex_lock+0x30/0x80
sp : ffffffc00da9b9c0
x29: ffffffc00da9b9c0 x28: 0000000000000000 x27: 0000000000000000
x26: ffffffc00da9bc90 x25: ffffff80c2024010 x24: ffffff80c2024000
x23: ffffff8083100000 x22: ffffff80831000d0 x21: ffffff80831000a8
x20: ffffff80831000a8 x19: ffffff8083100070 x18: 00000000ffff0a00
x17: 000000002f7254f1 x16: 0000000000000100 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 000000000001f0b8 x10: ffffffc00931f0b8 x9 : 0000000000000000
x8 : 0000000000000000 x7 : fefefefefeff2f60 x6 : 0000808080808080
x5 : 0000000000000000 x4 : 8080808080800000 x3 : ffffff80d2d4ee28
x2 : ffffff808c1d6e40 x1 : 0000000000000000 x0 : ffffff8083100070
Kernel panic - not syncing: Asynchronous SError Interrupt
CPU: 0 PID: 3595 Comm: mmdata_mgr Not tainted 5.17.1+ #166
Hardware name: Google Lazor (rev1 - 2) with LTE (DT)
Call trace:
dump_backtrace+0xf4/0x114
show_stack+0x24/0x30
dump_stack_lvl+0x64/0x7c
dump_stack+0x18/0x38
panic+0x150/0x38c
nmi_panic+0x88/0xa0
arm64_serror_panic+0x74/0x80
do_serror+0x0/0x80
do_serror+0x58/0x80
el1h_64_error_handler+0x34/0x4c
el1h_64_error+0x78/0x7c
mutex_lock+0x4c/0x80
__gsi_channel_start+0x50/0x17c
gsi_channel_start+0x54/0x90
ipa_endpoint_enable_one+0x34/0xc0
ipa_open+0x4c/0x120
Remove all IP0 resource management from the interconnect driver so that
clk-rpmh is the sole owner. This fixes the issue by preventing the
interconnect driver from overwriting the IP0 resource data that the
clk-rpmh driver wrote.
Cc: Alex Elder <elder@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Cc: Mike Tipton <quic_mdtipton@quicinc.com>
Fixes: b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate")
Fixes: bcd63d222b60 ("clk: qcom: rpmh: Add IPA clock for SC7180")
Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Alex Elder <elder@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220412220033.1273607-2-swboyd@chromium.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f41fdaea63ddf96d921ab36b2af4a90ccdb5744 upstream.
Make the test_dummy_encryption mount option require that the encrypt
feature flag be already enabled on the filesystem, rather than
automatically enabling it. Practically, this means that "-O encrypt"
will need to be included in MKFS_OPTIONS when running xfstests with the
test_dummy_encryption mount option. (ext4/053 also needs an update.)
Moreover, as long as the preconditions for test_dummy_encryption are
being tightened anyway, take the opportunity to start rejecting it when
!CONFIG_FS_ENCRYPTION rather than ignoring it.
The motivation for requiring the encrypt feature flag is that:
- Having the filesystem auto-enable feature flags is problematic, as it
bypasses the usual sanity checks. The specific issue which came up
recently is that in kernel versions where ext4 supports casefold but
not encrypt+casefold (v5.1 through v5.10), the kernel will happily add
the encrypt flag to a filesystem that has the casefold flag, making it
unmountable -- but only for subsequent mounts, not the initial one.
This confused the casefold support detection in xfstests, causing
generic/556 to fail rather than be skipped.
- The xfstests-bld test runners (kvm-xfstests et al.) already use the
required mkfs flag, so they will not be affected by this change. Only
users of test_dummy_encryption alone will be affected. But, this
option has always been for testing only, so it should be fine to
require that the few users of this option update their test scripts.
- f2fs already requires it (for its equivalent feature flag).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Link: https://lore.kernel.org/r/20220519204437.61645-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f44b3e74c33fe04defeff24ebcae98c3bcc5b285 upstream.
Remove unsupported forcing of `cpu_has_fpu' to 1, which makes the `nofpu'
kernel parameter non-functional, and also causes a link error:
ld: arch/mips/kernel/traps.o: in function `trap_init':
./arch/mips/include/asm/msa.h:(.init.text+0x348): undefined reference to `handle_fpe'
ld: ./arch/mips/include/asm/msa.h:(.init.text+0x354): undefined reference to `handle_fpe'
ld: ./arch/mips/include/asm/msa.h:(.init.text+0x360): undefined reference to `handle_fpe'
where the CONFIG_MIPS_FP_SUPPORT configuration option has been disabled.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reported-by: Stephen Zhang <starzhangzsd@gmail.com>
Fixes: 7505576d1c1a ("MIPS: add support for SGI Octane (IP30)")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 424c3781dd1cb401857585331eaaa425a13f2429 upstream.
Remove unsupported forcing of `cpu_has_fpu' to 1, which makes the `nofpu'
kernel parameter non-functional, and also causes a link error:
ld: arch/mips/kernel/traps.o: in function `trap_init':
./arch/mips/include/asm/msa.h:(.init.text+0x348): undefined reference to `handle_fpe'
ld: ./arch/mips/include/asm/msa.h:(.init.text+0x354): undefined reference to `handle_fpe'
ld: ./arch/mips/include/asm/msa.h:(.init.text+0x360): undefined reference to `handle_fpe'
where the CONFIG_MIPS_FP_SUPPORT configuration option has been disabled.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reported-by: Stephen Zhang <starzhangzsd@gmail.com>
Fixes: 0ebb2f4159af ("MIPS: IP27: Update/restructure CPU overrides")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f917af777011c88e977b9b9a5d00b280d3a59ce upstream.
Current rxe_requester() doesn't generate a completion when processing an
unsupported/invalid opcode. If rxe driver doesn't support a new opcode
(e.g. RDMA Atomic Write) and RDMA library supports it, an application
using the new opcode can reproduce this issue. Fix the issue by calling
"goto err;".
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20220410113513.27537-1-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db5dfbf5b201df65c1f5332c4d9d5e7c2f42396b upstream.
The bt number of cqc_timer of HIP09 increases compared with that of HIP08.
Therefore, cqc_timer_bt_num and num_cqc_timer do not match. As a result,
the driver may fail to allocate cqc_timer. So the driver needs to uniquely
uses cqc_timer_bt_num to represent the bt number of cqc_timer.
Fixes: 0e40dc2f70cd ("RDMA/hns: Add timer allocation support for hip08")
Link: https://lore.kernel.org/r/20220429093545.58070-1-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d0cc9e0e53e9946d7b8dc58279c62dfa7a2191b upstream.
These debugging tools let you call:
status = usb_control_msg_recv/send(udev, 0, REALTEK_USB_VENQT_CMD_REQ,
REALTEK_USB_VENQT_READ/WRITE, value,
REALTEK_USB_VENQT_CMD_IDX, io_buf,
size, RTW_USB_CONTROL_MSG_TIMEOUT,
GFP_KERNEL);
with a user controlled "value" in the 0-0xffff range. It's not a valid
API.
Fixes: 2b42bd58b321 ("staging: r8188eu: introduce new os_dep dir for RTL8188eu driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YoXS4OaD1oauPvmj@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts upstream commit f5bda35fba615ace70a656d4700423fa6c9bebee
from stable. It's not essential and will take some time during 5.19 to
work out properly.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
commit 37dc573c0a547e1aed0c9abb480fab797bd3833f upstream.
list_is_head() was added recently[1], and didn't have a KUnit test. The
implementation is trivial, so it's not a particularly exciting test, but
it'd be nice to get back to full coverage of the list functions.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/include/linux/list.h?id=0425473037db40d9e322631f2d4dc6ef51f97e88
Signed-off-by: David Gow <davidgow@google.com>
Acked-by: Daniel Latypov <dlatypov@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 213adc63dfbcdff9a0c19ec1f2681fda9c05cf6d upstream.
Commit 54de76c01239 ("kselftest/cgroup: fix test_stress.sh to use OUTPUT
dir") changes the test_core command path from . to $OUTPUT. However,
variable OUTPUT may not be defined if the command is run interactively.
Fix that by using ${OUTPUT:-.} to cover both cases.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70132763d5d2e94cd185e3aa92ac6a3ba89068fa upstream.
Currently the (possibly compound) pages used for receive buffers are
freed using __free_pages(). But according to this comment above the
definition of that function, that's wrong:
If you want to use the page's reference count to decide
when to free the allocation, you should allocate a compound
page, and use put_page() instead of __free_pages().
Convert the call to __free_pages() in ipa_endpoint_replenish_one()
to use put_page() instead.
Fixes: 6a606b90153b8 ("net: ipa: allocate transaction in replenish loop")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 155c0c90bca918de6e4327275dfc1d97fd604115 upstream.
Currently the (possibly compound) page used for receive buffers are
freed using __free_pages(). But according to this comment above the
definition of that function, that's wrong:
If you want to use the page's reference count to decide when
to free the allocation, you should allocate a compound page,
and use put_page() instead of __free_pages().
Convert the call to __free_pages() in ipa_endpoint_trans_release()
to use put_page() instead.
Fixes: ed23f02680caa ("net: ipa: define per-endpoint receive buffer size")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d2900f20edfe541f75756a00deeb2ffe7c66bc1 upstream.
Make sure to release the lane reset controller in case of a late probe
error (e.g. probe deferral).
Note that due to the reset controller being defined in devicetree in
"lane" child nodes, devm_reset_control_get_exclusive() cannot be used
directly.
Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Cc: stable@vger.kernel.org # 4.12
Cc: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220427063243.32576-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c1d3f79d9ca48e406b78e90e94cf09a8c076bf2 upstream.
It is possibe that probe failure issue happens when the device
and its child_device's probe happens at the same time.
In coresight_make_links, has_conns_grp is true for parent, but
has_conns_grp is false for child device as has_conns_grp is set
to true in coresight_create_conns_sysfs_group. The probe of parent
device will fail at this condition. Add has_conns_grp check for
child device before make the links and make the process from
device_register to connection_create be atomic to avoid this
probe failure issue.
Cc: stable@vger.kernel.org
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Suggested-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Link: https://lore.kernel.org/r/20220309142206.15632-1-quic_jinlmao@quicinc.com
[ Added Cc stable ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a177a36da6c54c98b8685d4f914cb3637d53c0d upstream.
iolatency needs to track the number of inflight IOs per cgroup. As this
tracking can be expensive, it is disabled when no cgroup has iolatency
configured for the device. To ensure that the inflight counters stay
balanced, iolatency_set_limit() freezes the request_queue while manipulating
the enabled counter, which ensures that no IO is in flight and thus all
counters are zero.
Unfortunately, iolatency_set_limit() isn't the only place where the enabled
counter is manipulated. iolatency_pd_offline() can also dec the counter and
trigger disabling. As this disabling happens without freezing the q, this
can easily happen while some IOs are in flight and thus leak the counts.
This can be easily demonstrated by turning on iolatency on an one empty
cgroup while IOs are in flight in other cgroups and then removing the
cgroup. Note that iolatency shouldn't have been enabled elsewhere in the
system to ensure that removing the cgroup disables iolatency for the whole
device.
The following keeps flipping on and off iolatency on sda:
echo +io > /sys/fs/cgroup/cgroup.subtree_control
while true; do
mkdir -p /sys/fs/cgroup/test
echo '8:0 target=100000' > /sys/fs/cgroup/test/io.latency
sleep 1
rmdir /sys/fs/cgroup/test
sleep 1
done
and there's concurrent fio generating direct rand reads:
fio --name test --filename=/dev/sda --direct=1 --rw=randread \
--runtime=600 --time_based --iodepth=256 --numjobs=4 --bs=4k
while monitoring with the following drgn script:
while True:
for css in css_for_each_descendant_pre(prog['blkcg_root'].css.address_of_()):
for pos in hlist_for_each(container_of(css, 'struct blkcg', 'css').blkg_list):
blkg = container_of(pos, 'struct blkcg_gq', 'blkcg_node')
pd = blkg.pd[prog['blkcg_policy_iolatency'].plid]
if pd.value_() == 0:
continue
iolat = container_of(pd, 'struct iolatency_grp', 'pd')
inflight = iolat.rq_wait.inflight.counter.value_()
if inflight:
print(f'inflight={inflight} {disk_name(blkg.q.disk).decode("utf-8")} '
f'{cgroup_path(css.cgroup).decode("utf-8")}')
time.sleep(1)
The monitoring output looks like the following:
inflight=1 sda /user.slice
inflight=1 sda /user.slice
...
inflight=14 sda /user.slice
inflight=13 sda /user.slice
inflight=17 sda /user.slice
inflight=15 sda /user.slice
inflight=18 sda /user.slice
inflight=17 sda /user.slice
inflight=20 sda /user.slice
inflight=19 sda /user.slice <- fio stopped, inflight stuck at 19
inflight=19 sda /user.slice
inflight=19 sda /user.slice
If a cgroup with stuck inflight ends up getting throttled, the throttled IOs
will never get issued as there's no completion event to wake it up leading
to an indefinite hang.
This patch fixes the bug by unifying enable handling into a work item which
is automatically kicked off from iolatency_set_min_lat_nsec() which is
called from both iolatency_set_limit() and iolatency_pd_offline() paths.
Punting to a work item is necessary as iolatency_pd_offline() is called
under spinlocks while freezing a request_queue requires a sleepable context.
This also simplifies the code reducing LOC sans the comments and avoids the
unnecessary freezes which were happening whenever a cgroup's latency target
is newly set or cleared.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Liu Bo <bo.liu@linux.alibaba.com>
Fixes: 8c772a9bfc7c ("blk-iolatency: fix IO hang due to negative inflight counter")
Cc: stable@vger.kernel.org # v5.0+
Link: https://lore.kernel.org/r/Yn9ScX6Nx2qIiQQi@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 242436973831aa97e8ce19533c6c912ea8def31b upstream.
Code must be resilient to enable a queue many times.
At the moment the queue is resetting so it's definitely not the expected
behavior.
v2: set vq->ready = 0 at disable.
Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator")
Cc: stable@vger.kernel.org
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220519145919.772896-1-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a21c3ac93aff7b4522b152399df8f6a041df56d upstream.
update documentation to correctly state the interrupt-cells to be 2.
Cc: stable@vger.kernel.org
Fixes: 4fd9bbc6e071 ("drivers/gpio: Altera soft IP GPIO driver devicetree binding")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 627f01eab93d8671d4e4afee9b148f9998d20e7c upstream.
One of the changes in Sphinx 5.0.0 [1] says [sic]:
5.0.0 final
- #10474: language does not accept None as it value.
The default value of language becomes to 'en' now.
[1]: https://www.sphinx-doc.org/en/master/changes.html#release-5-0-0-released-may-30-2022
It results in a new warning from Sphinx 5.0.0 [sic]:
WARNING: Invalid configuration value found: 'language = None'.
Update your configuration to a valid langauge code. Falling
back to 'en' (English).
Silence the warning by using 'en'.
It works with all the Sphinx versions required for building
kernel documentation (1.7.9 or later).
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/bd0c2ddc-2401-03cb-4526-79ca664e1cbe@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a55cf74ffb5d004b93647e4389096880ce37d6b upstream.
There is a race condition in smb2_compound_op:
after_close:
num_rqst++;
if (cfile) {
cifsFileInfo_put(cfile); // sends SMB2_CLOSE to the server
cfile = NULL;
This is triggered by smb2_query_path_info operation that happens during
revalidate_dentry. In smb2_query_path_info, get_readable_path is called to
load the cfile, increasing the reference counter. If in the meantime, this
reference becomes the very last, this call to cifsFileInfo_put(cfile) will
trigger a SMB2_CLOSE request sent to the server just before sending this compound
request – and so then the compound request fails either with EBADF/EIO depending
on the timing at the server, because the handle is already closed.
In the first scenario, the race seems to be happening between smb2_query_path_info
triggered by the rename operation, and between “cleanup” of asynchronous writes – while
fsync(fd) likely waits for the asynchronous writes to complete, releasing the writeback
structures can happen after the close(fd) call. So the EBADF/EIO errors will pop up if
the timing is such that:
1) There are still outstanding references after close(fd) in the writeback structures
2) smb2_query_path_info successfully fetches the cfile, increasing the refcounter by 1
3) All writeback structures release the same cfile, reducing refcounter to 1
4) smb2_compound_op is called with that cfile
In the second scenario, the race seems to be similar – here open triggers the
smb2_query_path_info operation, and if all other threads in the meantime decrease the
refcounter to 1 similarly to the first scenario, again SMB2_CLOSE will be sent to the
server just before issuing the compound request. This case is harder to reproduce.
See https://bugzilla.samba.org/show_bug.cgi?id=15051
Cc: stable@vger.kernel.org
Fixes: 8de9e86c67ba ("cifs: create a helper to find a writeable handle by path name")
Signed-off-by: Ondrej Hubsch <ohubsch@purestorage.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2672a4bff6c03a20d5ae460a091f67ee782c3eff upstream.
From inspection I found a couple of GPIO lookups that are
listed with device "gpio-pxa", but actually have a number
from a different gpio controller.
Try to rectify that here, with a guess of what the actual
device name is.
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 096f58507374e1293a9e9cff8a1ccd5f37780a20 upstream.
Since commit 766c6b63aa04 ("spi: fix client driver breakages when using
GPIO descriptors"), the panel has been blank due to an inverted CS GPIO.
In order to correct this, drop the spi-cs-high from the panel SPI device.
Fixes: 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/CY4PR04MB05670C771062570E911AF3B4CB1C9@CY4PR04MB0567.namprd04.prod.outlook.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 23a43cc437e747473d5f8f98b4fe189fb5c433b7 upstream.
Commit 4782c0a5dd88 ("clk: tegra: Don't deassert reset on enabling
clocks") removed deassertion of reset lines when enabling peripheral
clocks. This breaks the initialization of the DFLL driver which relied
on this behaviour.
Fix this problem by adding explicit deassert/assert requests to the
driver. Tested on Google Pixel C.
Cc: stable@vger.kernel.org
Fixes: 4782c0a5dd88 ("clk: tegra: Don't deassert reset on enabling clocks")
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0017f2c856e21bb900be88469e15dac4f41f4065 upstream.
Commit 4782c0a5dd88 ("clk: tegra: Don't deassert reset on enabling
clocks") removed deassertion of reset lines when enabling peripheral
clocks. This breaks the initialization of the DFLL driver which relied
on this behaviour.
In order to be able to fix this, add the corresponding reset to the DT.
Tested on Google Pixel C.
Cc: stable@vger.kernel.org
Fixes: 4782c0a5dd88 ("clk: tegra: Don't deassert reset on enabling clocks")
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bdef417d84536715145f6dc9cc3275c46f26295a upstream.
The bug is here:
return crtc;
The list iterator value 'crtc' will *always* be set and non-NULL by
list_for_each_entry(), so it is incorrect to assume that the iterator
value will be NULL if the list is empty or no element is found.
To fix the bug, return 'crtc' when found, otherwise return NULL.
Cc: stable@vger.kernel.org
fixes: 89c78134cc54d ("gma500: Add Poulsbo support")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220327052028.2013-1-xiam0nd.tong@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b917cbe38e9b0d002492477a9fc2bfee2412ce4 upstream.
The bug is here:
if (!encoder) {
The list iterator value 'encoder' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
is found.
To fix the bug, use a new variable 'iter' as the list iterator,
while use the original variable 'encoder' as a dedicated pointer
to point to the found element.
Cc: stable@vger.kernel.org
Fixes: ec9eab097a500 ("drm/tilcdc: Add drm bridge support for attaching drm bridge drivers")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Tested-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20220327061516.5076-1-xiam0nd.tong@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9f3af4fbb1d955bbaf872d9e76502f6e3e803cb upstream.
When x_char is to be sent, the TX path overwrites whatever is in the
circular buffer at offset 0 with x_char and sends it using
pch_uart_hal_write(). I don't understand how this was supposed to work
if xmit->buf[0] already contained some character. It must have been
lost.
Remove this whole pop_tx_x() concept and do the work directly in the
callers. (Without printing anything using dev_dbg().)
Cc: <stable@vger.kernel.org>
Fixes: 3c6a483275f4 (Serial: EG20T: add PCH_UART driver)
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220503080808.28332-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32feee36c30ea06e38ccb8ae6e5c44c6eec790a6 upstream.
The journal no-space deadlock was reported time to time. Such deadlock
can happen in the following situation.
When all journal buckets are fully filled by active jset with heavy
write I/O load, the cache set registration (after a reboot) will load
all active jsets and inserting them into the btree again (which is
called journal replay). If a journaled bkey is inserted into a btree
node and results btree node split, new journal request might be
triggered. For example, the btree grows one more level after the node
split, then the root node record in cache device super block will be
upgrade by bch_journal_meta() from bch_btree_set_root(). But there is no
space in journal buckets, the journal replay has to wait for new journal
bucket to be reclaimed after at least one journal bucket replayed. This
is one example that how the journal no-space deadlock happens.
The solution to avoid the deadlock is to reserve 1 journal bucket in
run time, and only permit the reserved journal bucket to be used during
cache set registration procedure for things like journal replay. Then
the journal space will never be fully filled, there is no chance for
journal no-space deadlock to happen anymore.
This patch adds a new member "bool do_reserve" in struct journal, it is
inititalized to 0 (false) when struct journal is allocated, and set to
1 (true) by bch_journal_space_reserve() when all initialization done in
run_cache_set(). In the run time when journal_reclaim() tries to
allocate a new journal bucket, free_journal_buckets() is called to check
whether there are enough free journal buckets to use. If there is only
1 free journal bucket and journal->do_reserve is 1 (true), the last
bucket is reserved and free_journal_buckets() will return 0 to indicate
no free journal bucket. Then journal_reclaim() will give up, and try
next time to see whetheer there is free journal bucket to allocate. By
this method, there is always 1 jouranl bucket reserved in run time.
During the cache set registration, journal->do_reserve is 0 (false), so
the reserved journal bucket can be used to avoid the no-space deadlock.
Reported-by: Nikhil Kshirsagar <nkshirsagar@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220524102336.10684-5-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80db4e4707e78cb22287da7d058d7274bd4cb370 upstream.
After making bch_sectors_dirty_init() being multithreaded, the existing
incremental dirty sector counting in bch_root_node_dirty_init() doesn't
release btree occupation after iterating 500000 (INIT_KEYS_EACH_TIME)
bkeys. Because a read lock is added on btree root node to prevent the
btree to be split during the dirty sectors counting, other I/O requester
has no chance to gain the write lock even restart bcache_btree().
That is to say, the incremental dirty sectors counting is incompatible
to the multhreaded bch_sectors_dirty_init(). We have to choose one and
drop another one.
In my testing, with 512 bytes random writes, I generate 1.2T dirty data
and a btree with 400K nodes. With single thread and incremental dirty
sectors counting, it takes 30+ minites to register the backing device.
And with multithreaded dirty sectors counting, the backing device
registration can be accomplished within 2 minutes.
The 30+ minutes V.S. 2- minutes difference makes me decide to keep
multithreaded bch_sectors_dirty_init() and drop the incremental dirty
sectors counting. This is what this patch does.
But INIT_KEYS_EACH_TIME is kept, in sectors_dirty_init_fn() the CPU
will be released by cond_resched() after every INIT_KEYS_EACH_TIME keys
iterated. This is to avoid the watchdog reports a bogus soft lockup
warning.
Fixes: b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be multithreaded")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220524102336.10684-4-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4dc34ae1b45fe26e772a44379f936c72623dd407 upstream.
Commit b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be
multithreaded") makes bch_sectors_dirty_init() to be much faster
when counting dirty sectors by iterating all dirty keys in the btree.
But it isn't in ideal shape yet, still can be improved.
This patch does the following changes to improve current parallel dirty
keys iteration on the btree,
- Add read lock to root node when multiple threads iterating the btree,
to prevent the root node gets split by I/Os from other registered
bcache devices.
- Remove local variable "char name[32]" and generate kernel thread name
string directly when calling kthread_run().
- Allocate "struct bch_dirty_init_state state" directly on stack and
avoid the unnecessary dynamic memory allocation for it.
- Decrease BCH_DIRTY_INIT_THRD_MAX from 64 to 12 which is enough indeed.
- Increase &state->started to count created kernel thread after it
succeeds to create.
- When wait for all dirty key counting threads to finish, use
wait_event() to replace wait_event_interruptible().
With the above changes, the code is more clear, and some potential error
conditions are avoided.
Fixes: b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be multithreaded")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220524102336.10684-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 622536443b6731ec82c563aae7807165adbe9178 upstream.
Commit 8e7102273f59 ("bcache: make bch_btree_check() to be
multithreaded") makes bch_btree_check() to be much faster when checking
all btree nodes during cache device registration. But it isn't in ideal
shap yet, still can be improved.
This patch does the following thing to improve current parallel btree
nodes check by multiple threads in bch_btree_check(),
- Add read lock to root node while checking all the btree nodes with
multiple threads. Although currently it is not mandatory but it is
good to have a read lock in code logic.
- Remove local variable 'char name[32]', and generate kernel thread name
string directly when calling kthread_run().
- Allocate local variable "struct btree_check_state check_state" on the
stack and avoid unnecessary dynamic memory allocation for it.
- Reduce BCH_BTR_CHKTHREAD_MAX from 64 to 12 which is enough indeed.
- Increase check_state->started to count created kernel thread after it
succeeds to create.
- When wait for all checking kernel threads to finish, use wait_event()
to replace wait_event_interruptible().
With this change, the code is more clear, and some potential error
conditions are avoided.
Fixes: 8e7102273f59 ("bcache: make bch_btree_check() to be multithreaded")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220524102336.10684-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e6c86be0e57079d1fb6c7c7e5423db096d0548a upstream.
The two bugs are here:
if (encoder) {
if (bridge && bridge->timings)
The list iterator value 'encoder/bridge' will *always* be set and
non-NULL by drm_for_each_encoder()/list_for_each_entry(), so it is
incorrect to assume that the iterator value will be NULL if the
list is empty or no element is found.
To fix the bug, use a new variable '*_iter' as the list iterator,
while use the old variable 'encoder/bridge' as a dedicated pointer
to point to the found element.
Cc: stable@vger.kernel.org
Fixes: 99e360442f223 ("drm/stm: Fix bus_flags handling")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Acked-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220327055355.3808-1-xiam0nd.tong@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54a6f29522da3c914da30e50721dedf51046449a upstream.
If the previous list_for_each_entry_continue_rcu() don't exit early
(no goto hit inside the loop), the iterator 'cvif' after the loop
will be a bogus pointer to an invalid structure object containing
the HEAD (&ar->vif_list). As a result, the use of 'cvif' after that
will lead to a invalid memory access (i.e., 'cvif->id': the invalid
pointer dereference when return back to/after the callsite in the
carl9170_update_beacon()).
The original intention should have been to return the valid 'cvif'
when found in list, NULL otherwise. So just return NULL when no
entry found, to fix this bug.
Cc: stable@vger.kernel.org
Fixes: 1f1d9654e183c ("carl9170: refactor carl9170_update_beacon")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220328122820.1004-1-xiam0nd.tong@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4213ff556740bb45e2d9ff0f50d056c4e7dd0921 upstream.
The driver has a custom put function for "DSP Voice Wake Up" which does
not generate event notifications on change, instead returning 0. Since we
already exit early in the case that there is no change this can be fixed
by unconditionally returning 1 at the end of the function.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220428162444.3883147-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 746285cf81dc19502ab238249d75f5990bd2d231 upstream.
Using not existing queues can panic the kernel with rtl8180/rtl8185 cards.
Ignore the skb priority for those cards, they only have one tx queue. Pierre
Asselin (pa@panix.com) reported the kernel crash in the Gentoo forum:
https://forums.gentoo.org/viewtopic-t-1147832-postdays-0-postorder-asc-start-25.html
He also confirmed that this patch fixes the issue. In summary this happened:
After updating wpa_supplicant from 2.9 to 2.10 the kernel crashed with a
"divide error: 0000" when connecting to an AP. Control port tx now tries to
use IEEE80211_AC_VO for the priority, which wpa_supplicants starts to use in
2.10.
Since only the rtl8187se part of the driver supports QoS, the priority
of the skb is set to IEEE80211_AC_BE (2) by mac80211 for rtl8180/rtl8185
cards.
rtl8180 is then unconditionally reading out the priority and finally crashes on
drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c line 544 without this
patch:
idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries
"ring->entries" is zero for rtl8180/rtl8185 cards, tx_ring[2] never got
initialized.
Cc: stable@vger.kernel.org
Reported-by: pa@panix.com
Tested-by: pa@panix.com
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220422145228.7567-1-alexander@wetzel-home.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b011946d039d66bbc7102137e98cc67e1356aa87 upstream.
The commit a69755b18774 ("xtensa simdisk: switch to proc_create_data()")
split read operation into two parts, first retrieving the path when it's
non-null and second retrieving the trailing '\n'. However when the path
is non-null the first simple_read_from_buffer updates ppos, and the
second simple_read_from_buffer returns 0 if ppos is greater than 1 (i.e.
almost always). As a result reading from that proc file is almost always
empty.
Fix it by making a temporary copy of the path with the trailing '\n' and
using simple_read_from_buffer on that copy.
Cc: stable@vger.kernel.org
Fixes: a69755b18774 ("xtensa simdisk: switch to proc_create_data()")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a04e1928e2ead144dc2f369768bc0a0f3110af89 upstream.
We forget to call untrack_pfn() to pair with track_pfn_remap() when range
is not allowed to hotplug. Fix it by jump err_kasan.
Link: https://lkml.kernel.org/r/20220531122643.25249-1-linmiaohe@huawei.com
Fixes: bca3feaa0764 ("mm/memory_hotplug: prevalidate the address range being added with platform")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 48381273f8734d28ef56a5bdf1966dd8530111bc upstream.
The routine huge_pmd_unshare() is passed a pointer to an address
associated with an area which may be unshared. If unshare is successful
this address is updated to 'optimize' callers iterating over huge page
addresses. For the optimization to work correctly, address should be
updated to the last huge page in the unmapped/unshared area. However, in
the common case where the passed address is PUD_SIZE aligned, the address
is incorrectly updated to the address of the preceding huge page. That
wastes CPU cycles as the unmapped/unshared range is scanned twice.
Link: https://lkml.kernel.org/r/20220524205003.126184-1-mike.kravetz@oracle.com
Fixes: 39dde65c9940 ("shared page table for hugetlb page")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 37462a920392cb86541650a6f4121155f11f1199 upstream.
With gcc version 12.0.1 20220401 (Red Hat 12.0.1-0), building with
defconfig results in the following compilation error:
| CC mm/swapfile.o
| mm/swapfile.c: In function `setup_swap_info':
| mm/swapfile.c:2291:47: error: array subscript -1 is below array bounds
| of `struct plist_node[]' [-Werror=array-bounds]
| 2291 | p->avail_lists[i].prio = 1;
| | ~~~~~~~~~~~~~~^~~
| In file included from mm/swapfile.c:16:
| ./include/linux/swap.h:292:27: note: while referencing `avail_lists'
| 292 | struct plist_node avail_lists[]; /*
| | ^~~~~~~~~~~
This is due to the compiler detecting that the mask in
node_states[__state] could theoretically be zero, which would lead to
first_node() returning -1 through find_first_bit.
I believe that the warning/error is legitimate. I first tried adding a
test to check that the node mask is not emtpy, since a similar test exists
in the case where MAX_NUMNODES == 1.
However, adding the if statement causes other warnings to appear in
for_each_cpu_node_but, because it introduces a dangling else ambiguity.
And unfortunately, GCC is not smart enough to detect that the added test
makes the case where (node) == -1 impossible, so it still complains with
the same message.
This is why I settled on replacing that with a harmless, but relatively
useless (node) >= 0 test. Based on the warning for the dangling else, I
also decided to fix the case where MAX_NUMNODES == 1 by moving the
condition inside the for loop. It will still only be tested once. This
ensures that the meaning of an else following for_each_node_mask or
derivatives would not silently have a different meaning depending on the
configuration.
Link: https://lkml.kernel.org/r/20220414150855.2407137-3-dinechin@redhat.com
Signed-off-by: Christophe de Dinechin <christophe@dinechin.org>
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ben Segall <bsegall@google.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c572e4888ad1be123c1516ec577ad30a700bbec4 upstream.
Peter Pavlisko reported the following problem on kernel bugzilla 216007.
When I try to extract an uncompressed tar archive (2.6 milion
files, 760.3 GiB in size) on newly created (empty) XFS file system,
after first low tens of gigabytes extracted the process hangs in
iowait indefinitely. One CPU core is 100% occupied with iowait,
the other CPU core is idle (on 2-core Intel Celeron G1610T).
It was bisected to c9fa563072e1 ("xfs: use alloc_pages_bulk_array() for
buffers") but XFS is only the messenger. The problem is that nothing is
waking kswapd to reclaim some pages at a time the PCP lists cannot be
refilled until some reclaim happens. The bulk allocator checks that there
are some pages in the array and the original intent was that a bulk
allocator did not necessarily need all the requested pages and it was best
to return as quickly as possible.
This was fine for the first user of the API but both NFS and XFS require
the requested number of pages be available before making progress. Both
could be adjusted to call the page allocator directly if a bulk allocation
fails but it puts a burden on users of the API. Adjust the semantics to
attempt at least one allocation via __alloc_pages() before returning so
kswapd is woken if necessary.
It was reported via bugzilla that the patch addressed the problem and that
the tar extraction completed successfully. This may also address bug
215975 but has yet to be confirmed.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216007
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215975
Link: https://lkml.kernel.org/r/20220526091210.GC3441@techsingularity.net
Fixes: 387ba26fb1cb ("mm/page_alloc: add a bulk page allocator")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org> [5.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 60a60e32cf91169840abcb4a80f0b0df31708ba7 upstream.
This reverts commit a4efc174b382fcdb which introduced a regression issue
that when there're multiple processes allocating dma memory in parallel by
calling dma_alloc_coherent(), it may fail sometimes as follows:
Error log:
cma: cma_alloc: linux,cma: alloc failed, req-size: 148 pages, ret: -16
cma: number of available pages:
3@125+20@172+12@236+4@380+32@736+17@2287+23@2473+20@36076+99@40477+108@40852+44@41108+20@41196+108@41364+108@41620+
108@42900+108@43156+483@44061+1763@45341+1440@47712+20@49324+20@49388+5076@49452+2304@55040+35@58141+20@58220+20@58284+
7188@58348+84@66220+7276@66452+227@74525+6371@75549=> 33161 free of 81920 total pages
When issue happened, we saw there were still 33161 pages (129M) free CMA
memory and a lot available free slots for 148 pages in CMA bitmap that we
want to allocate.
When dumping memory info, we found that there was also ~342M normal
memory, but only 1352K CMA memory left in buddy system while a lot of
pageblocks were isolated.
Memory info log:
Normal free:351096kB min:30000kB low:37500kB high:45000kB reserved_highatomic:0KB
active_anon:98060kB inactive_anon:98948kB active_file:60864kB inactive_file:31776kB
unevictable:0kB writepending:0kB present:1048576kB managed:1018328kB mlocked:0kB
bounce:0kB free_pcp:220kB local_pcp:192kB free_cma:1352kB lowmem_reserve[]: 0 0 0
Normal: 78*4kB (UECI) 1772*8kB (UMECI) 1335*16kB (UMECI) 360*32kB (UMECI) 65*64kB (UMCI)
36*128kB (UMECI) 16*256kB (UMCI) 6*512kB (EI) 8*1024kB (UEI) 4*2048kB (MI) 8*4096kB (EI)
8*8192kB (UI) 3*16384kB (EI) 8*32768kB (M) = 489288kB
The root cause of this issue is that since commit a4efc174b382 ("mm/cma.c:
remove redundant cma_mutex lock"), CMA supports concurrent memory
allocation. It's possible that the memory range process A trying to alloc
has already been isolated by the allocation of process B during memory
migration.
The problem here is that the memory range isolated during one allocation
by start_isolate_page_range() could be much bigger than the real size we
want to alloc due to the range is aligned to MAX_ORDER_NR_PAGES.
Taking an ARMv7 platform with 1G memory as an example, when
MAX_ORDER_NR_PAGES is big (e.g. 32M with max_order 14) and CMA memory is
relatively small (e.g. 128M), there're only 4 MAX_ORDER slot, then it's
very easy that all CMA memory may have already been isolated by other
processes when one trying to allocate memory using dma_alloc_coherent().
Since current CMA code will only scan one time of whole available CMA
memory, then dma_alloc_coherent() may easy fail due to contention with
other processes.
This patch simply falls back to the original method that using cma_mutex
to make alloc_contig_range() run sequentially to avoid the issue.
Link: https://lkml.kernel.org/r/20220509094551.3596244-1-aisheng.dong@nxp.com
Link: https://lore.kernel.org/all/20220315144521.3810298-2-aisheng.dong@nxp.com/
Fixes: a4efc174b382 ("mm/cma.c: remove redundant cma_mutex lock")
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [5.11+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3884774d731f03d3a3dd4fb70ec2d9341ceb39d upstream.
The data type of the return value of the iommu_map_sg_atomic
is ssize_t, but the data type of iova size is size_t,
e.g. one is int while the other is unsigned int.
When iommu_map_sg_atomic return value is compared with iova size,
it will force the signed int to be converted to unsigned int, if
iova map fails and iommu_map_sg_atomic return error code is less
than 0, then (ret < iova_len) is false, which will to cause not
do free iova, and the master can still successfully get the iova
of map fail, which is not expected.
Therefore, we need to check the return value of iommu_map_sg_atomic
in two cases according to whether it is less than 0.
Fixes: ad8f36e4b6b1 ("iommu: return full error code from iommu_map_sg[_atomic]()")
Signed-off-by: Yunfei Wang <yf.wang@mediatek.com>
Cc: <stable@vger.kernel.org> # 5.15.*
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220507085204.16914-1-yf.wang@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b9ad480bd1dd25f4ff4854af5685fa334a2f57a upstream.
The bug is here:
if (!iommu || iommu->dev->of_node != spec->np) {
The list iterator value 'iommu' will *always* be set and non-NULL by
list_for_each_entry(), so it is incorrect to assume that the iterator
value will be NULL if the list is empty or no element is found (in fact,
it will point to a invalid structure object containing HEAD).
To fix the bug, use a new value 'iter' as the list iterator, while use
the old value 'iommu' as a dedicated variable to point to the found one,
and remove the unneeded check for 'iommu->dev->of_node != spec->np'
outside the loop.
Cc: stable@vger.kernel.org
Fixes: f78ebca8ff3d6 ("iommu/msm: Add support for generic master bindings")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220501132823.12714-1-xiam0nd.tong@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 376b9133826865568167b4091ef92a68c4622b87 upstream.
outstanding credits must be initialized to 0,
because it means the sum of credits consumed by
in-flight requests.
And outstanding credits must be compared with
total credits in smb2_validate_credit_charge(),
because total credits are the sum of credits
granted by ksmbd.
This patch fix the following error,
while frametest with Windows clients:
Limits exceeding the maximum allowable outstanding requests,
given : 128, pending : 8065
Fixes: b589f5db6d4a ("ksmbd: limits exceeding the maximum allowable outstanding requests")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Reported-by: Yufan Chen <wiz.chen@gmail.com>
Tested-by: Yufan Chen <wiz.chen@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3e35142ef99fe6b4fe5d834ad43ee13cca10a2dc upstream.
Since commit d1bcae833b32f1 ("ELF: Don't generate unused section
symbols") [1], binutils (v2.36+) started dropping section symbols that
it thought were unused. This isn't an issue in general, but with
kexec_file.c, gcc is placing kexec_arch_apply_relocations[_add] into a
separate .text.unlikely section and the section symbol ".text.unlikely"
is being dropped. Due to this, recordmcount is unable to find a non-weak
symbol in .text.unlikely to generate a relocation record against.
Address this by dropping the weak attribute from these functions.
Instead, follow the existing pattern of having architectures #define the
name of the function they want to override in their headers.
[1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d1bcae833b32f1
[akpm@linux-foundation.org: arch/s390/include/asm/kexec.h needs linux/module.h]
Link: https://lkml.kernel.org/r/20220519091237.676736-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a4a62a14be1947fa945c5c11ebf67326381a568 upstream.
syscall_stub_data() expects the data_count parameter to be the number of
longs, not bytes.
==================================================================
BUG: KASAN: stack-out-of-bounds in syscall_stub_data+0x70/0xe0
Read of size 128 at addr 000000006411f6f0 by task swapper/1
CPU: 0 PID: 1 Comm: swapper Not tainted 5.18.0+ #18
Call Trace:
show_stack.cold+0x166/0x2a7
__dump_stack+0x3a/0x43
dump_stack_lvl+0x1f/0x27
print_report.cold+0xdb/0xf81
kasan_report+0x119/0x1f0
kasan_check_range+0x3a3/0x440
memcpy+0x52/0x140
syscall_stub_data+0x70/0xe0
write_ldt_entry+0xac/0x190
init_new_ldt+0x515/0x960
init_new_context+0x2c4/0x4d0
mm_init.constprop.0+0x5ed/0x760
mm_alloc+0x118/0x170
0x60033f48
do_one_initcall+0x1d7/0x860
0x60003e7b
kernel_init+0x6e/0x3d4
new_thread_handler+0x1e7/0x2c0
The buggy address belongs to stack of task swapper/1
and is located at offset 64 in frame:
init_new_ldt+0x0/0x960
This frame has 2 objects:
[32, 40) 'addr'
[64, 80) 'desc'
==================================================================
Fixes: 858259cf7d1c443c83 ("uml: maintain own LDT entries")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
