IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Prior, the "input_pool_data" array needed no real initialization, and so
it was easy to mark it with __latent_entropy to populate it during
compile-time. In switching to using a hash function, this required us to
specifically initialize it to some specific state, which means we
dropped the __latent_entropy attribute. An unfortunate side effect was
this meant the pool was no longer seeded using compile-time random data.
In order to bring this back, we declare an array in rand_initialize()
with __latent_entropy and call mix_pool_bytes() on that at init, which
accomplishes the same thing as before. We make this __initconst, so that
it doesn't take up space at runtime after init.
Fixes: 6e8ec2552c7d ("random: use computational hash for entropy extraction")
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The comment about get_random_{u32,u64}() not invoking reseeding got
added in an unrelated commit, that then was recently reverted by
0313bc278dac ("Revert "random: block in /dev/urandom""). So this adds
that little comment snippet back, and improves the wording a bit too.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
If CONFIG_RANDOM_TRUST_CPU is set, the RNG initializes using RDRAND.
But, the user can disable (or enable) this behavior by setting
`random.trust_cpu=0/1` on the kernel command line. This allows system
builders to do reasonable things while avoiding howls from tinfoil
hatters. (Or vice versa.)
CONFIG_RANDOM_TRUST_BOOTLOADER is basically the same thing, but regards
the seed passed via EFI or device tree, which might come from RDRAND or
a TPM or somewhere else. In order to allow distros to more easily enable
this while avoiding those same howls (or vice versa), this commit adds
the corresponding `random.trust_bootloader=0/1` toggle.
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Graham Christensen <graham@grahamc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Link: https://github.com/NixOS/nixpkgs/pull/165355
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
At boot time, EFI calls add_bootloader_randomness(), which in turn calls
add_hwgenerator_randomness(). Currently add_hwgenerator_randomness()
feeds the first 64 bytes of randomness to the "fast init"
non-crypto-grade phase. But if add_hwgenerator_randomness() gets called
with more than POOL_MIN_BITS of entropy, there's no point in passing it
off to the "fast init" stage, since that's enough entropy to bootstrap
the real RNG. The "fast init" stage is just there to provide _something_
in the case where we don't have enough entropy to properly bootstrap the
RNG. But if we do have enough entropy to bootstrap the RNG, the current
logic doesn't serve a purpose. So, in the case where we're passed
greater than or equal to POOL_MIN_BITS of entropy, this commit makes us
skip the "fast init" phase.
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This reverts commit 6f98a4bfee72c22f50aedb39fb761567969865fe.
It turns out we still can't do this. Way too many platforms that don't
have any real source of randomness at boot and no jitter entropy because
they don't even have a cycle counter.
As reported by Guenter Roeck:
"This causes a large number of qemu boot test failures for various
architectures (arm, m68k, microblaze, sparc32, xtensa are the ones I
observed).
Common denominator is that boot hangs at 'Saving random seed:'"
This isn't hugely unexpected - we tried it, it failed, so now we'll
revert it.
Link: https://lore.kernel.org/all/20220322155820.GA1745955@roeck-us.net/
Reported-and-bisected-by: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rather than waiting a full second in an interruptable waiter before
trying to generate entropy, try to generate entropy first and wait
second. While waiting one second might give an extra second for getting
entropy from elsewhere, we're already pretty late in the init process
here, and whatever else is generating entropy will still continue to
contribute. This has implications on signal handling: we call
try_to_generate_entropy() from wait_for_random_bytes(), and
wait_for_random_bytes() always uses wait_event_interruptible_timeout()
when waiting, since it's called by userspace code in restartable
contexts, where signals can pend. Since try_to_generate_entropy() now
runs first, if a signal is pending, it's necessary for
try_to_generate_entropy() to check for signals, since it won't hit the
wait until after try_to_generate_entropy() has returned. And even before
this change, when entering a busy loop in try_to_generate_entropy(), we
should have been checking to see if any signals are pending, so that a
process doesn't get stuck in that loop longer than expected.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
In order to chip away at the "premature first" problem, we augment our
existing entropy accounting with more frequent reseedings at boot.
The idea is that at boot, we're getting entropy from various places, and
we're not very sure which of early boot entropy is good and which isn't.
Even when we're crediting the entropy, we're still not totally certain
that it's any good. Since boot is the one time (aside from a compromise)
that we have zero entropy, it's important that we shepherd entropy into
the crng fairly often.
At the same time, we don't want a "premature next" problem, whereby an
attacker can brute force individual bits of added entropy. In lieu of
going full-on Fortuna (for now), we can pick a simpler strategy of just
reseeding more often during the first 5 minutes after boot. This is
still bounded by the 256-bit entropy credit requirement, so we'll skip a
reseeding if we haven't reached that, but in case entropy /is/ coming
in, this ensures that it makes its way into the crng rather rapidly
during these early stages.
Ordinarily we reseed if the previous reseeding is 300 seconds old. This
commit changes things so that for the first 600 seconds of boot time, we
reseed if the previous reseeding is uptime / 2 seconds old. That means
that we'll reseed at the very least double the uptime of the previous
reseeding.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than sometimes checking `crng_init < 2`, we should always use the
crng_ready() macro, so that should we change anything later, it's
consistent. Additionally, that macro already has a likely() around it,
which means we don't need to open code our own likely() and unlikely()
annotations.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The current fast_mix() function is a piece of classic mailing list
crypto, where it just sort of sprung up by an anonymous author without a
lot of real analysis of what precisely it was accomplishing. As an ARX
permutation alone, there are some easily searchable differential trails
in it, and as a means of preventing malicious interrupts, it completely
fails, since it xors new data into the entire state every time. It can't
really be analyzed as a random permutation, because it clearly isn't,
and it can't be analyzed as an interesting linear algebraic structure
either, because it's also not that. There really is very little one can
say about it in terms of entropy accumulation. It might diffuse bits,
some of the time, maybe, we hope, I guess. But for the most part, it
fails to accomplish anything concrete.
As a reminder, the simple goal of add_interrupt_randomness() is to
simply accumulate entropy until ~64 interrupts have elapsed, and then
dump it into the main input pool, which uses a cryptographic hash.
It would be nice to have something cryptographically strong in the
interrupt handler itself, in case a malicious interrupt compromises a
per-cpu fast pool within the 64 interrupts / 1 second window, and then
inside of that same window somehow can control its return address and
cycle counter, even if that's a bit far fetched. However, with a very
CPU-limited budget, actually doing that remains an active research
project (and perhaps there'll be something useful for Linux to come out
of it). And while the abundance of caution would be nice, this isn't
*currently* the security model, and we don't yet have a fast enough
solution to make it our security model. Plus there's not exactly a
pressing need to do that. (And for the avoidance of doubt, the actual
cluster of 64 accumulated interrupts still gets dumped into our
cryptographically secure input pool.)
So, for now we are going to stick with the existing interrupt security
model, which assumes that each cluster of 64 interrupt data samples is
mostly non-malicious and not colluding with an infoleaker. With this as
our goal, we have a few more choices, simply aiming to accumulate
entropy, while discarding the least amount of it.
We know from <https://eprint.iacr.org/2019/198> that random oracles,
instantiated as computational hash functions, make good entropy
accumulators and extractors, which is the justification for using
BLAKE2s in the main input pool. As mentioned, we don't have that luxury
here, but we also don't have the same security model requirements,
because we're assuming that there aren't malicious inputs. A
pseudorandom function instance can approximately behave like a random
oracle, provided that the key is uniformly random. But since we're not
concerned with malicious inputs, we can pick a fixed key, which is not
secret, knowing that "nature" won't interact with a sufficiently chosen
fixed key by accident. So we pick a PRF with a fixed initial key, and
accumulate into it continuously, dumping the result every 64 interrupts
into our cryptographically secure input pool.
For this, we make use of SipHash-1-x on 64-bit and HalfSipHash-1-x on
32-bit, which are already in use in the kernel's hsiphash family of
functions and achieve the same performance as the function they replace.
It would be nice to do two rounds, but we don't exactly have the CPU
budget handy for that, and one round alone is already sufficient.
As mentioned, we start with a fixed initial key (zeros is fine), and
allow SipHash's symmetry breaking constants to turn that into a useful
starting point. Also, since we're dumping the result (or half of it on
64-bit so as to tax our hash function the same amount on all platforms)
into the cryptographically secure input pool, there's no point in
finalizing SipHash's output, since it'll wind up being finalized by
something much stronger. This means that all we need to do is use the
ordinary round function word-by-word, as normal SipHash does.
Simplified, the flow is as follows:
Initialize:
siphash_state_t state;
siphash_init(&state, key={0, 0, 0, 0});
Update (accumulate) on interrupt:
siphash_update(&state, interrupt_data_and_timing);
Dump into input pool after 64 interrupts:
blake2s_update(&input_pool, &state, sizeof(state) / 2);
The result of all of this is that the security model is unchanged from
before -- we assume non-malicious inputs -- yet we now implement that
model with a stronger argument. I would like to emphasize, again, that
the purpose of this commit is to improve the existing design, by making
it analyzable, without changing any fundamental assumptions. There may
well be value down the road in changing up the existing design, using
something cryptographically strong, or simply using a ring buffer of
samples rather than having a fast_mix() at all, or changing which and
how much data we collect each interrupt so that we can use something
linear, or a variety of other ideas. This commit does not invalidate the
potential for those in the future.
For example, in the future, if we're able to characterize the data we're
collecting on each interrupt, we may be able to inch toward information
theoretic accumulators. <https://eprint.iacr.org/2021/523> shows that `s
= ror32(s, 7) ^ x` and `s = ror64(s, 19) ^ x` make very good
accumulators for 2-monotone distributions, which would apply to
timestamp counters, like random_get_entropy() or jiffies, but would not
apply to our current combination of the two values, or to the various
function addresses and register values we mix in. Alternatively,
<https://eprint.iacr.org/2021/1002> shows that max-period linear
functions with no non-trivial invariant subspace make good extractors,
used in the form `s = f(s) ^ x`. However, this only works if the input
data is both identical and independent, and obviously a collection of
address values and counters fails; so it goes with theoretical papers.
Future directions here may involve trying to characterize more precisely
what we actually need to collect in the interrupt handler, and building
something specific around that.
However, as mentioned, the morass of data we're gathering at the
interrupt handler presently defies characterization, and so we use
SipHash for now, which works well and performs well.
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Drivers such as WireGuard need to learn when VMs fork in order to clear
sessions. This commit provides a simple notifier_block for that, with a
register and unregister function. When no VM fork detection is compiled
in, this turns into a no-op, similar to how the power notifier works.
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
We previously rolled our own randomness readiness notifier, which only
has two users in the whole kernel. Replace this with a more standard
atomic notifier block that serves the same purpose with less code. Also
unexport the symbols, because no modules use it, only unconditional
builtins. The only drawback is that it's possible for a notification
handler returning the "stop" code to prevent further processing, but
given that there are only two users, and that we're unexporting this
anyway, that doesn't seem like a significant drawback for the
simplification we receive here.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Since add_vmfork_randomness() is only called from vmgenid.o, we can
guard it in CONFIG_VMGENID, similarly to how we do with
add_disk_randomness() and CONFIG_BLOCK. If we ever have multiple things
calling into add_vmfork_randomness(), we can add another shared Kconfig
symbol for that, but for now, this is good enough. Even though
add_vmfork_randomess() is a pretty small function, removing it means
that there are only calls to crng_reseed(false) and none to
crng_reseed(true), which means the compiler can constant propagate the
false, removing branches from crng_reseed() and its descendants.
Additionally, we don't even need the symbol to be exported if
CONFIG_VMGENID is not a module, so conditionalize that too.
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
When a VM forks, we must immediately mix in additional information to
the stream of random output so that two forks or a rollback don't
produce the same stream of random numbers, which could have catastrophic
cryptographic consequences. This commit adds a simple API, add_vmfork_
randomness(), for that, by force reseeding the crng.
This has the added benefit of also draining the entropy pool and setting
its timer back, so that any old entropy that was there prior -- which
could have already been used by a different fork, or generally gone
stale -- does not contribute to the accounting of the next 256 bits.
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jann Horn <jannh@google.com>
Cc: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
We leave around these old sysctls for compatibility, and we keep them
"writable" for compatibility, but even after writing, we should keep
reporting the same value. This is consistent with how userspaces tend to
use sysctl_random_write_wakeup_bits, writing to it, and then later
reading from it and using the value.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This isn't used by anything or anywhere, but we can't delete it due to
compatibility. So at least give it the correct value of what it's
supposed to be instead of a garbage one.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This topic has come up countless times, and usually doesn't go anywhere.
This time I thought I'd bring it up with a slightly narrower focus,
updated for some developments over the last three years: we finally can
make /dev/urandom always secure, in light of the fact that our RNG is
now always seeded.
Ever since Linus' 50ee7529ec45 ("random: try to actively add entropy
rather than passively wait for it"), the RNG does a haveged-style jitter
dance around the scheduler, in order to produce entropy (and credit it)
for the case when we're stuck in wait_for_random_bytes(). How ever you
feel about the Linus Jitter Dance is beside the point: it's been there
for three years and usually gets the RNG initialized in a second or so.
As a matter of fact, this is what happens currently when people use
getrandom(). It's already there and working, and most people have been
using it for years without realizing.
So, given that the kernel has grown this mechanism for seeding itself
from nothing, and that this procedure happens pretty fast, maybe there's
no point any longer in having /dev/urandom give insecure bytes. In the
past we didn't want the boot process to deadlock, which was
understandable. But now, in the worst case, a second goes by, and the
problem is resolved. It seems like maybe we're finally at a point when
we can get rid of the infamous "urandom read hole".
The one slight drawback is that the Linus Jitter Dance relies on random_
get_entropy() being implemented. The first lines of try_to_generate_
entropy() are:
stack.now = random_get_entropy();
if (stack.now == random_get_entropy())
return;
On most platforms, random_get_entropy() is simply aliased to get_cycles().
The number of machines without a cycle counter or some other
implementation of random_get_entropy() in 2022, which can also run a
mainline kernel, and at the same time have a both broken and out of date
userspace that relies on /dev/urandom never blocking at boot is thought
to be exceedingly low. And to be clear: those museum pieces without
cycle counters will continue to run Linux just fine, and even
/dev/urandom will be operable just like before; the RNG just needs to be
seeded first through the usual means, which should already be the case
now.
On systems that really do want unseeded randomness, we already offer
getrandom(GRND_INSECURE), which is in use by, e.g., systemd for seeding
their hash tables at boot. Nothing in this commit would affect
GRND_INSECURE, and it remains the means of getting those types of random
numbers.
This patch goes a long way toward eliminating a long overdue userspace
crypto footgun. After several decades of endless user confusion, we will
finally be able to say, "use any single one of our random interfaces and
you'll be fine. They're all the same. It doesn't matter." And that, I
think, is really something. Finally all of those blog posts and
disagreeing forums and contradictory articles will all become correct
about whatever they happened to recommend, and along with it, a whole
class of vulnerabilities eliminated.
With very minimal downside, we're finally in a position where we can
make this change.
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Guo Ren <guoren@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: David Laight <David.Laight@aculab.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Taking spinlocks from IRQ context is generally problematic for
PREEMPT_RT. That is, in part, why we take trylocks instead. However, a
spin_try_lock() is also problematic since another spin_lock() invocation
can potentially PI-boost the wrong task, as the spin_try_lock() is
invoked from an IRQ-context, so the task on CPU (random task or idle) is
not the actual owner.
Additionally, by deferring the crng pre-init loading to the worker, we
can use the cryptographic hash function rather than xor, which is
perhaps a meaningful difference when considering this data has only been
through the relatively weak fast_mix() function.
The biggest downside of this approach is that the pre-init loading is
now deferred until later, which means things that need random numbers
after interrupts are enabled, but before workqueues are running -- or
before this particular worker manages to run -- are going to get into
trouble. Hopefully in the real world, this window is rather small,
especially since this code won't run until 64 interrupts had occurred.
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
random_get_entropy() returns a cycles_t, not an unsigned long, which is
sometimes 64 bits on various 32-bit platforms, including x86.
Conversely, jiffies is always unsigned long. This commit fixes things to
use cycles_t for fields that use random_get_entropy(), named "cycles",
and unsigned long for fields that use jiffies, named "now". It's also
good to mix in a cycles_t and a jiffies in the same way for both
add_device_randomness and add_timer_randomness, rather than using xor in
one case. Finally, we unify the order of these volatile reads, always
reading the more precise cycles counter, and then jiffies, so that the
cycle counter is as close to the event as possible.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than hard coding various lengths, we can use the right constants.
Strings should be `char *` while buffers should be `u8 *`. Rather than
have a nonsensical and unused maxlength, just remove it. Finally, use
snprintf instead of sprintf, just out of good hygiene.
As well, remove the old comment about returning a binary UUID via the
binary sysctl syscall. That syscall was removed from the kernel in 5.5,
and actually, the "uuid_strategy" function and related infrastructure
for even serving it via the binary sysctl syscall was removed with
894d2491153a ("sysctl drivers: Remove dead binary sysctl support") back
in 2.6.33.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The only time that we need to wake up /dev/random writers on
RNDCLEARPOOL/RNDZAPPOOL is when we're changing from a value that is
greater than or equal to POOL_MIN_BITS to zero, because if we're
changing from below POOL_MIN_BITS to zero, the writers are already
unblocked.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
When the interrupt handler does not have a valid cycle counter, it calls
get_reg() to read a register from the irq stack, in round-robin.
Currently it does this assuming that registers are 32-bit. This is
_probably_ the case, and probably all platforms without cycle counters
are in fact 32-bit platforms. But maybe not, and either way, it's not
quite correct. This commit fixes that to deal with `unsigned long`
rather than `u32`.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
For the irq randomness fast pool, rather than having to use expensive
atomics, which were visibly the most expensive thing in the entire irq
handler, simply take care of the extreme edge case of resetting count to
zero in the cpuhp online handler, just after workqueues have been
reenabled. This simplifies the code a bit and lets us use vanilla
variables rather than atomics, and performance should be improved.
As well, very early on when the CPU comes up, while interrupts are still
disabled, we clear out the per-cpu crng and its batches, so that it
always starts with fresh randomness.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This has no real functional change, as crng_pre_init_inject() (and
before that, crng_slow_init()) always checks for == 0, not >= 2. So
correct the outer unlocked change to reflect that. Before this used
crng_ready(), which was not correct.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
crng_fast_load() and crng_slow_load() have different semantics:
- crng_fast_load() xors and accounts with crng_init_cnt.
- crng_slow_load() hashes and doesn't account.
However add_hwgenerator_randomness() can afford to hash (it's called
from a kthread), and it should account. Additionally, ones that can
afford to hash don't need to take a trylock but can take a normal lock.
So, we combine these into one function, crng_pre_init_inject(), which
allows us to control these in a uniform way. This will make it simpler
later to simplify this all down when the time comes for that.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Since rand_initialize() is run while interrupts are still off and
nothing else is running, we don't need to repeatedly take and release
the pool spinlock, especially in the RDSEED loop.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
On PREEMPT_RT, it's problematic to take spinlocks from hard irq
handlers. We can fix this by deferring to a workqueue the dumping of
the fast pool into the input pool.
We accomplish this with some careful rules on fast_pool->count:
- When it's incremented to >= 64, we schedule the work.
- If the top bit is set, we never schedule the work, even if >= 64.
- The worker is responsible for setting it back to 0 when it's done.
There are two small issues around using workqueues for this purpose that
we work around.
The first issue is that mix_interrupt_randomness() might be migrated to
another CPU during CPU hotplug. This issue is rectified by checking that
it hasn't been migrated (after disabling irqs). If it has been migrated,
then we set the count to zero, so that when the CPU comes online again,
it can requeue the work. As part of this, we switch to using an
atomic_t, so that the increment in the irq handler doesn't wipe out the
zeroing if the CPU comes back online while this worker is running.
The second issue is that, though relatively minor in effect, we probably
want to make sure we get a consistent view of the pool onto the stack,
in case it's interrupted by an irq while reading. To do this, we don't
reenable irqs until after the copy. There are only 18 instructions
between the cli and sti, so this is a pretty tiny window.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Now that we've re-documented the various sections, we can remove the
outdated text here and replace it with a high-level overview.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This pulls all of the sysctl-focused functions into the sixth labeled
section.
No functional changes.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This pulls all of the userspace read/write-focused functions into the
fifth labeled section.
No functional changes.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This pulls all of the entropy collection-focused functions into the
fourth labeled section.
No functional changes.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This pulls all of the entropy extraction-focused functions into the
third labeled section.
No functional changes.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This pulls all of the crng-focused functions into the second labeled
section.
No functional changes.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This pulls all of the readiness waiting-focused functions into the first
labeled section.
No functional changes.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This is purely cosmetic. Future work involves figuring out which of
these headers we need and which we don't.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
In preparation for separating responsibilities, break out the entropy
count management part of crng_reseed() into its own function.
No functional changes.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
In the irq handler, we fill out 16 bytes differently on 32-bit and
64-bit platforms, and for 32-bit vs 64-bit cycle counters, which doesn't
always correspond with the bitness of the platform. Whether or not you
like this strangeness, it is a matter of fact. But it might not be a
fact you well realized until now, because the code that loaded the irq
info into 4 32-bit words was quite confusing. Instead, this commit
makes everything explicit by having separate (compile-time) branches for
32-bit and 64-bit types.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Convert the current license into the SPDX notation of "(GPL-2.0 OR
BSD-3-Clause)". This infers GPL-2.0 from the text "ALTERNATIVELY, this
product may be distributed under the terms of the GNU General Public
License, in which case the provisions of the GPL are required INSTEAD OF
the above restrictions" and it infers BSD-3-Clause from the verbatim
BSD 3 clause license in the file.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
These explicit tracepoints aren't really used and show sign of aging.
It's work to keep these up to date, and before I attempted to keep them
up to date, they weren't up to date, which indicates that they're not
really used. These days there are better ways of introspecting anyway.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
With tools like kbench9000 giving more finegrained responses, and this
basically never having been used ever since it was initially added,
let's just get rid of this. There *is* still work to be done on the
interrupt handler, but this really isn't the way it's being developed.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Now that we have an explicit base_crng generation counter, we don't need
a separate one for batched entropy. Rather, we can just move the
generation forward every time we change crng_init state or update the
base_crng key.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
crng_init is protected by primary_crng->lock. Therefore, we need
to hold this lock when increasing crng_init to 2. As we shouldn't
hold this lock for too long, only hold it for those parts which
require protection.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This buffer may contain entropic data that shouldn't stick around longer
than needed, so zero out the temporary buffer at the end of write_pool().
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
In 79a8468747c5 ("random: check for increase of entropy_count because of
signed conversion"), a number of checks were added around what values
were passed to account(), because account() was doing fancy fixed point
fractional arithmetic, and a user had some ability to pass large values
directly into it. One of things in that commit was limiting those values
to INT_MAX >> 6. The first >> 3 was for bytes to bits, and the next >> 3
was for bits to 1/8 fractional bits.
However, for several years now, urandom reads no longer touch entropy
accounting, and so this check serves no purpose. The current flow is:
urandom_read_nowarn()-->get_random_bytes_user()-->chacha20_block()
Of course, we don't want that size_t to be truncated when adding it into
the ssize_t. But we arrive at urandom_read_nowarn() in the first place
either via ordinary fops, which limits reads to MAX_RW_COUNT, or via
getrandom() which limits reads to INT_MAX.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
We've been using a flurry of int, unsigned int, size_t, and ssize_t.
Let's unify all of this into size_t where it makes sense, as it does in
most places, and leave ssize_t for return values with possible errors.
In addition, keeping with the convention of other functions in this
file, functions that are dealing with raw bytes now take void *
consistently instead of a mix of that and u8 *, because much of the time
we're actually passing some other structure that is then interpreted as
bytes by the function.
We also take the opportunity to fix the outdated and incorrect comment
in get_random_bytes_arch().
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Since we have a hash function that's really fast, and the goal of
crng_slow_load() is reportedly to "touch all of the crng's state", we
can just hash the old state together with the new state and call it a
day. This way we dont need to reason about another LFSR or worry about
various attacks there. This code is only ever used at early boot and
then never again.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than the clunky NUMA full ChaCha state system we had prior, this
commit is closer to the original "fast key erasure RNG" proposal from
<https://blog.cr.yp.to/20170723-random.html>, by simply treating ChaCha
keys on a per-cpu basis.
All entropy is extracted to a base crng key of 32 bytes. This base crng
has a birthdate and a generation counter. When we go to take bytes from
the crng, we first check if the birthdate is too old; if it is, we
reseed per usual. Then we start working on a per-cpu crng.
This per-cpu crng makes sure that it has the same generation counter as
the base crng. If it doesn't, it does fast key erasure with the base
crng key and uses the output as its new per-cpu key, and then updates
its local generation counter. Then, using this per-cpu state, we do
ordinary fast key erasure. Half of this first block is used to overwrite
the per-cpu crng key for the next call -- this is the fast key erasure
RNG idea -- and the other half, along with the ChaCha state, is returned
to the caller. If the caller desires more than this remaining half, it
can generate more ChaCha blocks, unlocked, using the now detached ChaCha
state that was just returned. Crypto-wise, this is more or less what we
were doing before, but this simply makes it more explicit and ensures
that we always have backtrack protection by not playing games with a
shared block counter.
The flow looks like this:
──extract()──► base_crng.key ◄──memcpy()───┐
│ │
└──chacha()──────┬─► new_base_key
└─► crngs[n].key ◄──memcpy()───┐
│ │
└──chacha()───┬─► new_key
└─► random_bytes
│
└────►
There are a few hairy details around early init. Just as was done
before, prior to having gathered enough entropy, crng_fast_load() and
crng_slow_load() dump bytes directly into the base crng, and when we go
to take bytes from the crng, in that case, we're doing fast key erasure
with the base crng rather than the fast unlocked per-cpu crngs. This is
fine as that's only the state of affairs during very early boot; once
the crng initializes we never use these paths again.
In the process of all this, the APIs into the crng become a bit simpler:
we have get_random_bytes(buf, len) and get_random_bytes_user(buf, len),
which both do what you'd expect. All of the details of fast key erasure
and per-cpu selection happen only in a very short critical section of
crng_make_state(), which selects the right per-cpu key, does the fast
key erasure, and returns a local state to the caller's stack. So, we no
longer have a need for a separate backtrack function, as this happens
all at once here. The API then allows us to extend backtrack protection
to batched entropy without really having to do much at all.
The result is a bit simpler than before and has fewer foot guns. The
init time state machine also gets a lot simpler as we don't need to wait
for workqueues to come online and do deferred work. And the multi-core
performance should be increased significantly, by virtue of having hardly
any locking on the fast path.
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
During crng_init == 0, we never credit entropy in add_interrupt_
randomness(), but instead dump it directly into the primary_crng. That's
fine, except for the fact that we then wind up throwing away that
entropy later when we switch to extracting from the input pool and
xoring into (and later in this series overwriting) the primary_crng key.
The two other early init sites -- add_hwgenerator_randomness()'s use
crng_fast_load() and add_device_ randomness()'s use of crng_slow_load()
-- always additionally give their inputs to the input pool. But not
add_interrupt_randomness().
This commit fixes that shortcoming by calling mix_pool_bytes() after
crng_fast_load() in add_interrupt_randomness(). That's partially
verboten on PREEMPT_RT, where it implies taking spinlock_t from an IRQ
handler. But this also only happens during early boot and then never
again after that. Plus it's a trylock so it has the same considerations
as calling crng_fast_load(), which we're already using.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Suggested-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Continuing the reasoning of "random: ensure early RDSEED goes through
mixer on init", we don't want RDRAND interacting with anything without
going through the mixer function, as a backdoored CPU could presumably
cancel out data during an xor, which it'd have a harder time doing when
being forced through a cryptographic hash function. There's actually no
need at all to be calling RDRAND in write_pool(), because before we
extract from the pool, we always do so with 32 bytes of RDSEED hashed in
at that stage. Xoring at this stage is needless and introduces a minor
liability.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Continuing the reasoning of "random: use RDSEED instead of RDRAND in
entropy extraction" from this series, at init time we also don't want to
be xoring RDSEED directly into the crng. Instead it's safer to put it
into our entropy collector and then re-extract it, so that it goes
through a hash function with preimage resistance. As a matter of hygiene,
we also order these now so that the RDSEED byte are hashed in first,
followed by the bytes that are likely more predictable (e.g. utsname()).
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
