IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
savagefb_probe() calls savage_init_fb_info() that can successfully
allocate memory for info->pixmap.addr but then fail when
fb_alloc_cmap() fails. savagefb_probe() goes to label failed_init and
does not free allocated memory. It is not valid to go to label
failed_mmio since savage_init_fb_info() can fail during memory
allocation as well. So, the patch free allocated memory on the error
handling path in savage_init_fb_info() itself.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Cc: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200619162136.9010-1-novikov@ispras.ru
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200617175647.GA26370@embeddedor
Use array3_size() helper instead of the open-coded version in scr_memcpyw()
and scr_memsetw(). These sorts of multiplication factors need to be wrapped
in array3_size().
This issue was found with the help of Coccinelle and, audited and fixed
manually.
Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200615231542.GA20470@embeddedor
Since we lack the hardware (or proper emulator setup) for
testing needed changes add FIXMEs to document the issues
(so at least they are not forgotten).
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/380c0494-ed02-b2be-65b0-d385627fb894@samsung.com
On 5/14/20 10:21 PM, Geert Uytterhoeven wrote:
> These #ifdefs are relics from APUS (Amiga Power-Up System), which
> added a PPC board. APUS support was killed off a long time ago,
> when arch/ppc/ was still king, but these #ifdefs were missed, because
> they didn't test for CONFIG_APUS.
Add FIXME about using the C code variants (APUS ones) in the future.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/767d36ff-22ec-8136-7ebc-1d9d0d3ac98d@samsung.com
Apparently there are EDIDs in the wild with multiple DispID extension
blocks. Iterate through them all.
In one particular case the tile information is specicied in the
second DispID ext block, and since the current parser only looks
at the first DispID ext block we don't notice that we're dealing
with a tiled display.
While at it change a few functions to return void since we have
no use for the errno.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/27
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527130310.27099-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Apparently EDIDs with multiple DispID ext blocks is a thing, so prepare
for iterating through multiple ext blocks of the same type by
passing the starting ext block index to drm_find_edid_extension(). Well
also have drm_find_edid_extension() update the index to point to the
next ext block on success. Thus we should be able to call
drm_find_edid_extension() in loop.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527130310.27099-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
drm_gem_dumb_map_offset() now exists and does everything
vgem_gem_dump_map does and *ought* to do.
In particular, vgem_gem_dumb_map() was trying to reject mmapping an
imported dmabuf by checking the existence of obj->filp. Unfortunately,
we always allocated an obj->filp, even if unused for an imported dmabuf.
Instead, the drm_gem_dumb_map_offset(), since commit 90378e589192
("drm/gem: drm_gem_dumb_map_offset(): reject dma-buf"), uses the
obj->import_attach to reject such invalid mmaps.
This prevents vgem from allowing userspace mmapping the dumb handle and
attempting to incorrectly fault in remote pages belonging to another
device, where there may not even be a struct page.
v2: Use the default drm_gem_dumb_map_offset() callback
Fixes: af33a9190d02 ("drm/vgem: Enable dmabuf import interfaces")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.13+
Link: https://patchwork.freedesktop.org/patch/msgid/20200708154911.21236-1-chris@chris-wilson.co.uk
Add missing pm_runtime_get_sync() into ltdc_crtc_atomic_enable() to
match pm_runtime_put_sync() in ltdc_crtc_atomic_disable(), otherwise
the LTDC might suspend via runtime PM, disable clock, and then fail
to resume later on.
The test which triggers it is roughly -- run qt5 application which
uses eglfs platform and etnaviv, stop the application, sleep for 15
minutes, run the application again. This leads to a timeout waiting
for vsync, because the LTDC has suspended, but did not resume.
Fixes: 35ab6cfbf211 ("drm/stm: support runtime power management")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Yannick Fertré <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
To: dri-devel@lists.freedesktop.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200229221649.90813-1-marex@denx.de
The recent GCC compiler is very picky with the VD_H_START() and
AFBC_DEC_PIXEL_BGN_H() macros, triggering a runtime assert error as:
In function 'meson_overlay_setup_scaler_params',
inlined from 'meson_overlay_atomic_update' at
drivers/gpu/drm/meson/meson_overlay.c:542:2:
./include/linux/compiler.h:392:38: error: call to
'__compiletime_assert_341' declared with attribute error: FIELD_PREP:
value too large for the field
drivers/gpu/drm/meson/meson_overlay.c:413:4: note: in expansion of macro
'AFBC_DEC_PIXEL_BGN_H'
413 | AFBC_DEC_PIXEL_BGN_H(hd_start_lines - afbc_left) |
| ^~~~~~~~~~~~~~~~~~~~
./include/linux/compiler.h:392:38: error: call to
'__compiletime_assert_401' declared with attribute error: FIELD_PREP:
value too large for the field
It's not expected to overflow these fields, but the compiler did
find a case where it overflows.
We can safely ignore this, so mask the value with the field width.
Fixes: e860785d57306 ("drm/meson: overlay: setup overlay for Amlogic FBC")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[narmstrong: moved to (value) to avoid precedence issues]
Link: https://patchwork.freedesktop.org/patch/msgid/20200707135009.32474-1-narmstrong@baylibre.com
There's modesetting init code in ast_main.c. Move it to ast_mode.c and
merge it with the modesetting init code in ast_mode_init(). The result
is ast_mode_config_init(), which initalizes the whole modesetting.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-15-tzimmermann@suse.de
Struct ast_crtc has been cleaned up and it's now a wrapper around the
DRM CRTC structure struct drm_crtc. This patch converts the driver to
struct drm_crtc and removes struct ast_crtc.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-13-tzimmermann@suse.de
The cursor helpers reserve buffer objects in VRAM and update their
content. So although tied to modesetting, cursor helpers are more
of a memory manager. The modesetting's cursor plane requires this
functionality, so initialize cursors before modesetting.
While at it, also add an error check for ast_cursor_init().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-12-tzimmermann@suse.de
Register a release function to finalize cursors. The _fini() function
gets un-exported from the source file.
The function ast_mode_fini() is now empty and will be removed by a
later patch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-11-tzimmermann@suse.de
Updating the image in a cursor's HW BO requires a mapping of the BO's
buffer in the kernel's address space. Cursor image updates can happen
frequently and create CPU overhead.
As cursor HW BOs are small and never move, they are now map exactly
once during the initialization and the mapping is used throughout the
driver's lifetime.
This change also removes a possible source of failures from
ast_cursor_show(). As the helper does not establish mappings, it cannot
fail. As a result, the cursor plane's atomic-update helper does not
call any failable interfaces. All failures are detected before trying
to update the cursor plane.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-10-tzimmermann@suse.de
Having a cursor move function is misleading, as it actually enables the
cursor's image for displaying. So rename it to ast_cursor_show(). It's
semantics is to show a cursor at the specified location on the screen.
The displayed cursor is always the image in the cursor front BO.
This change also simplifies struct ast_crtc to being a mere wrapper around
around struct drm_crtc. It will be removed by a later patch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-7-tzimmermann@suse.de
The new helper ast_cursor_blit() updates a cursor's backbuffer HW
BO from a framebuffer structure. The cursor plane's prepare_fb()
function now uses the new interface.
Pinning and mapping of BOs is done automatically by the helper. This
includes the source BO, which was not pinned by the original code in
prepare_fb().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-4-tzimmermann@suse.de
The TXP so far has been leveraging the PixelValve infrastructure in the
driver, that was really two things: the interaction with DRM's CRTC
concept, the setup of the underlying pixelvalve and the setup of the shared
HVS, the pixelvalve part being irrelevant to the TXP since it accesses the
HVS directly.
Now that we have a clear separation between the three parts, we can
represent the TXP as a CRTC of its own, leveraging the common CRTC and HVS
code, but leaving aside the pixelvalve setup.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20f387f881b57f3474fa42d94cfd8bc1b7b80595.1591882579.git-series.maxime@cerno.tech
The vc4_crtc_data structure is currently storing data related to both the
general CRTC information needed by the rest of the vc4 driver (like HVS
output and available FIFOs) and some related to the pixelvalve attached to
that CRTC. Let's split this into two structures so that we can reuse the
CRTC part into the TXP later on.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/8eb317c91ac208d7f926d76ad421002fa0364c47.1591882579.git-series.maxime@cerno.tech
The CRTC in vc4 is backed by two devices, the HVS that does the composition
and the PixelValve that does the timing generation.
The writeback is kind of a special case since it doesn't have an associated
pixelvalve but goes straight from the HVS to the TXP. Therefore, it makes
sense to move out the HVS setup code into helpers so that we can also reuse
them from the TXP driver.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/96443394e81429ee38f070cfe231701b07e56d69.1591882579.git-series.maxime@cerno.tech
The VC4_SET_FIELD and VC4_GET_FIELD are reimplementing most of the logic
already defined in FIELD_SET and FIELD_GET. Let's convert the vc4 macros to
use the FIELD_* macros.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703135713.985810-1-maxime@cerno.tech
In cases such as DRM_FORMAT_MOD_SAMSUNG_16_16_TILE, the modifier
describes a generic pixel re-ordering which can be applicable to
multiple vendors.
Define an alias: DRM_FORMAT_MOD_GENERIC_16_16_TILE, which can be
used to describe this layout in a vendor-neutral way, and add a
comment about the expected usage of such "generic" modifiers.
Changes in v2:
- Move note about future cases to comment (Daniel)
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200626164800.11595-1-brian.starkey@arm.com
code refactoring for hibmc_drv_vdac.c, no actual function changes.
v2:
remove the debug message.
v3:
embedding connector and encoder in struct hibmc_drm_private.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1593680081-60313-1-git-send-email-tiantao6@hisilicon.com
Since the VD1 Amlogic FBC decoder is now configured by the overlay driver,
commit the right registers to decode the Amlogic FBC frame.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703080728.25207-7-narmstrong@baylibre.com
Setup the Amlogic FBC decoder for the VD1 video overlay plane to use
read the FBC header as Scatter Memory layout reference.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703080728.25207-6-narmstrong@baylibre.com
Setup the Amlogic FBC decoder for the VD1 video overlay plane to use
a different superblock size for the Memory Saving mode.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703080728.25207-5-narmstrong@baylibre.com
Setup the Amlogic FBC decoder for the VD1 video overlay plane.
The VD1 Amlogic FBC decoder is integrated in the pipeline like the
YUV pixel reading/formatter but used a direct memory address instead.
This adds support for the basic layout, and needs to calculate the content
body size since the header is allocated after.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703080728.25207-4-narmstrong@baylibre.com
Amlogic uses a proprietary lossless image compression protocol and format
for their hardware video codec accelerators, either video decoders or
video input encoders.
It considerably reduces memory bandwidth while writing and reading
frames in memory.
The underlying storage is considered to be 3 components, 8bit or 10-bit
per component, YCbCr 420, single plane :
- DRM_FORMAT_YUV420_8BIT
- DRM_FORMAT_YUV420_10BIT
This modifier will be notably added to DMA-BUF frames imported from the V4L2
Amlogic VDEC decoder.
This introduces the basic layout composed of:
- a body content organized in 64x32 superblocks with 4096 bytes per
superblock in default mode.
- a 32 bytes per 128x64 header block
This layout is tranferrable between Amlogic SoCs supporting this modifier.
The Memory Saving option exist changing the layout superblock size to save memory when
using 8bit components pixels size.
Finally is also adds the Scatter Memory layout, meaning the header contains IOMMU
references to the compressed frames content to optimize memory access
and layout.
In this mode, only the header memory address is needed, thus the content
memory organization is tied to the current producer execution and cannot
be saved/dumped neither transferrable between Amlogic SoCs supporting this
modifier.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703080728.25207-2-narmstrong@baylibre.com
Convert the analog TV, DVI, HDMI, and VGA connector bindings to DT schema
format.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630200216.1172566-1-robh@kernel.org
Now also comes with the added benefit of doing a drm_crtc_vblank_off(),
which means vblank state isn't ill-defined and fail-y at driver load
before the first modeset on each crtc.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612160056.2082681-5-daniel.vetter@ffwll.ch
Now also comes with the added benefit of doing a drm_crtc_vblank_off(),
which means vblank state isn't ill-defined and fail-y at driver load
before the first modeset on each crtc.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200612160056.2082681-3-daniel.vetter@ffwll.ch
