IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 23484d817082c3005252d8edfc8292c8a1006b5b upstream.
Fix the undefined usage of the GPIO consumer API after retrieving the
GPIO description with GPIO_ASIS. The API documentation mentions that
GPIO_ASIS won't set a GPIO direction and requires the user to set a
direction before using the GPIO.
This can be confirmed on i.MX6 hardware, where rfkill-gpio is no longer
able to enabled/disable a device, presumably because the GPIO controller
was never configured for the output direction.
Fixes: b2f750c3a80b ("net: rfkill: gpio: prevent value glitch during probe")
Cc: stable@vger.kernel.org
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Link: https://msgid.link/20231207075835.3091694-1-r.czerwinski@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff49bf1867578f23a5ffdd38f927f6e1e16796c4 upstream.
If some of p9pdu_readf() calls inside case 'T' in p9pdu_vreadf() fails,
the error path is not handled properly. *wnames or members of *wnames
array may be left uninitialized and invalidly freed.
Initialize *wnames to NULL in beginning of case 'T'. Initialize the first
*wnames array element to NULL and nullify the failing *wnames element so
that the error path freeing loop stops on the first NULL element and
doesn't proceed further.
Found by Linux Verification Center (linuxtesting.org).
Fixes: ace51c4dd2f9 ("9p: add new protocol support code")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Message-ID: <20231206200913.16135-1-pchelkin@ispras.ru>
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea3715941a9b7d816a1e9096ac0577900af2a69e upstream.
This add a mapping for the airplane mode button on the TUXEDO Pulse Gen3.
While it is physically a key it behaves more like a switch, sending a key
down on first press and a key up on 2nd press. Therefor the switch event
is used here. Besides this behaviour it uses the HID usage-id 0xc6
(Wireless Radio Button) and not 0xc8 (Wireless Radio Slider Switch), but
since neither 0xc6 nor 0xc8 are currently implemented at all in
soc_button_array this not to standard behaviour is not put behind a quirk
for the moment.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20231215171718.80229-1-wse@tuxedocomputers.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aef05e349bfd81c95adb4489639413fadbb74a83 upstream.
When the device is disconnected we get the following messages showing
failed operations:
Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
The reason is that although the device is detached, normal stop and
unbind operations are commanded from the driver. These operations are
not necessary in this situation, so avoid these logs when the device is
detached if the result of the operation is -ENODEV and if the new flag
informing about the disconnecting status is enabled.
cc: <stable@vger.kernel.org>
Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20231207175007.263907-1-jtornosm@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 59b047bc98084f8af2c41483e4d68a5adf2fa7f7 upstream.
If two Bluetooth devices both support BR/EDR and BLE, and also
support Secure Connections, then they only need to pair once.
The LTK generated during the LE pairing process may be converted
into a BR/EDR link key for BR/EDR transport, and conversely, a
link key generated during the BR/EDR SSP pairing process can be
converted into an LTK for LE transport. Hence, the link type of
the link key and LTK is not fixed, they can be either an LE LINK
or an ACL LINK.
Currently, in the mgmt_new_irk/ltk/crsk/link_key functions, the
link type is fixed, which could lead to incorrect address types
being reported to the application layer. Therefore, it is necessary
to add link_type/addr_type to the smp_irk/ltk/crsk and link_key,
to ensure the generation of the correct address type.
SMP over BREDR:
Before Fix:
> ACL Data RX: Handle 11 flags 0x02 dlen 12
BR/EDR SMP: Identity Address Information (0x09) len 7
Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 00:00:00:00:00:00 (Non-Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
After Fix:
> ACL Data RX: Handle 11 flags 0x02 dlen 12
BR/EDR SMP: Identity Address Information (0x09) len 7
Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 00:00:00:00:00:00 (Non-Resolvable)
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
SMP over LE:
Before Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 5F:5C:07:37:47:D5 (Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated Combination key from P-256 (0x08)
After Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 5E:03:1C:00:38:21 (Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
Store hint: Yes (0x01)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated Combination key from P-256 (0x08)
Cc: stable@vger.kernel.org
Signed-off-by: Xiao Yao <xiaoyao@rock-chips.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 78b99eb1faa7371bf9c534690f26a71b6996622d upstream.
L2CAP/COS/CED/BI-02-C PTS test send a malformed L2CAP signaling packet
with 2 commands in it (a connection request and an unknown command) and
expect to get a connection response packet and a command reject packet.
The second is currently not sent.
Cc: stable@vger.kernel.org
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e07e8348ea454615e268222ae3fc240421be768 upstream.
This can cause a race with bt_sock_ioctl() because
bt_sock_recvmsg() gets the skb from sk->sk_receive_queue
and then frees it without holding lock_sock.
A use-after-free for a skb occurs with the following flow.
```
bt_sock_recvmsg() -> skb_recv_datagram() -> skb_free_datagram()
bt_sock_ioctl() -> skb_peek()
```
Add lock_sock to bt_sock_recvmsg() to fix this issue.
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 99e67d46e5ff3c7c901af6009edec72d3d363be8 upstream.
Before setting HCI_INQUIRY bit check if HCI_OP_INQUIRY was really sent
otherwise the controller maybe be generating invalid events or, more
likely, it is a result of fuzzing tools attempting to test the right
behavior of the stack when unexpected events are generated.
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218151
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 513d88a88e0203188a38f4647dd08170aebd85df upstream.
Update the constant names for unused USB PIDs (product identifiers) to
reflect the new products now using the PIDs.
Signed-off-by: Mark Glover <mark.glover@actisense.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c2a8ebe3fe66a5f77d4c164a0bea8e2ff37b455 upstream.
The file for the new certificate (Chen-Yu Tsai's) didn't
end with a comma, so depending on the file order in the
build rule, we'd end up with invalid C when concatenating
the (now two) certificates. Fix that.
Cc: stable@vger.kernel.org
Reported-by: Biju Das <biju.das.jz@bp.renesas.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: fb768d3b13ff ("wifi: cfg80211: Add my certificate")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 772685c14743ad565bb271041ad3c262298cd6fc upstream.
This flash drive reports write protect during the first mode sense.
In the past this was not an issue as the kernel called revalidate twice,
thus asking the device for its write protect status twice, with write
protect being disabled in the second mode sense.
However, since commit 1e029397d12f ("scsi: sd: Reorganize DIF/DIX code to
avoid calling revalidate twice") that is no longer the case, thus the
device shows up read only.
[490891.289495] sd 12:0:0:0: [sdl] Write Protect is on
[490891.289497] sd 12:0:0:0: [sdl] Mode Sense: 2b 00 80 08
This does not appear to be a timing issue, as enabling the usbcore quirk
USB_QUIRK_DELAY_INIT has no effect on write protect.
Fixes: 1e029397d12f ("scsi: sd: Reorganize DIF/DIX code to avoid calling revalidate twice")
Cc: stable <stable@kernel.org>
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20231207134441.298131-1-tasos@tasossah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 48d6b91798a6694fdd6edb62799754b9d3fe0792 upstream.
Increase the quirk delay from 2 seconds to 4 seconds. This reflects a
change in the Windows driver in which the delay was increased to about
3.7 seconds. The larger delay fixes an issue where the device fails to
work unless it was powered up early during boot.
Also clarify in the quirk comment that the quirk is only applied to
older devices (USB ID 07fd:0008).
Signed-off-by: Jeremie Knuesel <knuesel@gmail.com>
Suggested-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=211975
Link: https://lore.kernel.org/r/20231217112243.33409-1-knuesel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bce61476dc82f114e24e9c2e11fb064781ec563c upstream.
Commit ee708e6baacd ("iio: buffer: introduce support for attaching more
IIO buffers") introduced support for multiple buffers per indio_dev but
left indio_dev->buffer for a few legacy use cases.
In the case of the triggered buffer, iio_triggered_buffer_cleanup()
still assumes that indio_dev->buffer points to the buffer allocated by
iio_triggered_buffer_setup_ext(). However, since
iio_triggered_buffer_setup_ext() now calls iio_device_attach_buffer()
to attach the buffer, indio_dev->buffer will only point to the buffer
allocated by iio_device_attach_buffer() if it the first buffer attached.
This adds a check to make sure that no other buffer has been attached
yet to ensure that indio_dev->buffer will be assigned when
iio_device_attach_buffer() is called.
As per discussion in the review thread, we may want to deal with multiple
triggers per device, but this is a fix for the issue in the meantime and
any such support would be unlikely to be suitable for a backport.
Fixes: ee708e6baacd ("iio: buffer: introduce support for attaching more IIO buffers")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231031210521.1661552-1-dlechner@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 60576e84c187043cef11f11d015249e71151d35a upstream.
Fix wrong handling of a DMA request where the probing only failed
if -EPROPE_DEFER was returned. Instead, let us fail if a non -ENODEV
value is returned. This makes DMAs explicitly optional. Even if the
DMA request is unsuccessfully, the ADC can still work properly.
We do also handle the defer probe case by making use of dev_err_probe().
Fixes: f438b9da75eb ("drivers: iio: ti_am335x_adc: add dma support")
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20230925134427.214556-1-w.egorov@phytec.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54cf39ec16335dadbe1ba008d8e5e98dae3e26f8 upstream.
The HTU21 offers 4 sampling frequencies: 20, 40, 70 and 120, which are
associated to an index that is used to select the right measurement
resolution and its corresponding measurement time. The current
implementation selects the measurement resolution and the temperature
measurement time properly, but it does not select the right humidity
measurement time in all cases.
In summary, the 40 and 70 humidity measurement times are swapped.
The reason for that is probably the unusual coding for the measurement
resolution. According to the datasheet, the bits [7,0] of the "user
register" are used as follows to select the bit resolution:
--------------------------------------------------
| Bit 7 | Bit 0 | RH | Temp | Trh (us) | Tt (us) |
--------------------------------------------------
| 0 | 0 | 12 | 14 | 16000 | 50000 |
--------------------------------------------------
| 0 | 1 | 8 | 12 | 3000 | 13000 |
--------------------------------------------------
| 1 | 0 | 10 | 13 | 5000 | 25000 |
--------------------------------------------------
| 1 | 1 | 11 | 11 | 8000 | 7000 |
--------------------------------------------------
*This table is available in the official datasheet, page 13/21. I have
just appended the times provided in the humidity/temperature tables,
pages 3/21, 5/21. Note that always a pair of resolutions is selected.
The sampling frequencies [20, 40, 70, 120] are assigned to a linear
index [0..3] which is then coded as follows [1]:
Index [7,0]
--------------
idx 0 0,0
idx 1 1,0
idx 2 0,1
idx 3 1,1
That is done that way because the temperature measurements are being
used as the reference for the sampling frequency (the frequencies and
the temperature measurement times are correlated), so increasing the
index always reduces the temperature measurement time and its
resolution. Therefore, the temperature measurement time array is as
simple as [50000, 25000, 13000, 7000]
On the other hand, the humidity resolution cannot follow the same
pattern because of the way it is coded in the "user register", where
both resolutions are selected at the same time. The humidity measurement
time array is the following: [16000, 3000, 5000, 8000], which defines
the following assignments:
Index [7,0] Trh
-----------------------
idx 0 0,0 16000 -> right, [0,0] selects 12 bits (Trh = 16000)
idx 1 1,0 3000 -> wrong! [1,0] selects 10 bits (Trh = 5000)
idx 2 0,1 5000 -> wrong! [0,1] selects 8 bits (Trh = 3000)
idx 3 1,1 8000 -> right, [1,1] selects 11 bits (Trh = 8000)
The times have been ordered as if idx = 1 -> [0,1] and idx = 2 -> [1,0],
which is not the case for the reason explained above.
So a simple modification is required to obtain the right humidity
measurement time array, swapping the values in the positions 1 and 2.
The right table should be the following: [16000, 5000, 3000, 8000]
Fix the humidity measurement time array with the right idex/value
coding.
[1] The actual code that makes this coding and assigns it to the current
value of the "user register" is the following:
config_reg &= 0x7E;
config_reg |= ((i & 1) << 7) + ((i & 2) >> 1);
Fixes: d574a87cc311 ("Add meas-spec sensors common part")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231026-topic-htu21_conversion_time-v1-1-bd257dc44209@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 08c94d80b2da481652fb633e79cbc41e9e326a91 ]
skb_share_check() already drops the reference to the skb when returning
NULL. Using kfree_skb() in the error handling path leads to an skb double
free.
Fix this by removing the variable tmp_skb, and return directly when
skb_share_check() returns NULL.
Fixes: 01a4cc4d0cd6 ("bnx2fc: do not add shared skbs to the fcoe_rx_list")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20221114110626.526643-1-weiyongjun@huaweicloud.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59b6a747e2d39227ac2325c5e29d6ab3bb070c2a ]
Check the return value of i2c_add_adapter. Static analysis revealed that
the function did not properly handle potential failures of
i2c_add_adapter, which could lead to partial initialization of the I2C
adapter and unstable operation.
Signed-off-by: Haoran Liu <liuhaoran14@163.com>
Link: https://lore.kernel.org/r/20231203164653.38983-1-liuhaoran14@163.com
Fixes: d7535ffa427b ("Input: driver for microcontroller keys on the iPaq h3xxx")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfc7db1cb94ad664546d70212699f8cc6c539e8c ]
Add the generic icc sync_state callback to ensure interconnect votes
are taken into account, instead of being pegged at maximum values.
Fixes: b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231130-topic-8250icc_syncstate-v1-1-7ce78ba6e04c@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3df0e29fb7788c4b3ddf37d5ed87dda2b822943 ]
inv_mpu6050_sensor_show() can return -EINVAL or IIO_VAL_INT. Return the
true value rather than only return IIO_VAL_INT.
Fixes: d5098447147c ("iio: imu: mpu6050: add calibration offset support")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231030020218.65728-1-suhui@nfschina.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad2ab1297d0c80899125a842bb7a078abfe1e6ce ]
Currently, if provider->xlate() or provider->xlate_extended()
"successfully" return a NULL node, then of_icc_get_from_provider() won't
consider that an error and will successfully return the NULL node. This
bypasses error handling in of_icc_get_by_index() and leads to NULL
dereferences in path_find().
This could be avoided by ensuring provider callbacks always return an
error for NULL nodes, but it's better to explicitly protect against this
in the common framework.
Fixes: 87e3031b6fbd ("interconnect: Allow endpoints translation via DT")
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Link: https://lore.kernel.org/r/20231025145829.11603-1-quic_mdtipton@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 324b70e997aab0a7deab8cb90711faccda4e98c8 ]
plane_view_scanout_stride() currently assumes that we had to pad the
mapping stride with dummy pages in order to align it. But that is not
the case if the original fb stride exceeds the aligned stride used
to populate the remapped view, which is calculated from the user
specified framebuffer width rather than the user specified framebuffer
stride.
Ignore the original fb stride in this case and just stick to the POT
aligned stride. Getting this wrong will cause the plane to fetch the
wrong data, and can lead to fault errors if the page tables at the
bogus location aren't even populated.
TODO: figure out if this is OK for CCS, or if we should instead increase
the width of the view to cover the entire user specified fb stride
instead...
Cc: Imre Deak <imre.deak@intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204202443.31247-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
(cherry picked from commit 01a39f1c4f1220a4e6a25729fae87ff5794cbc52)
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0da6bfe857ea9399498876cbe6ef428637b6e475 ]
Add support for remapping CCS FBs on MTL to remove the restriction
of the power-of-two sized stride and the 2MB surface offset alignment
for these FBs.
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230505144005.23480-2-nirmoy.das@intel.com
Stable-dep-of: 324b70e997aa ("drm/i915: Fix ADL+ tiled plane stride when the POT stride is smaller than the original")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef5cb493a9acd7d97870d6e542020980ae3f3483 ]
If we want to test with DPT disabled on ADL the POT stride remap
stuff needs to be disabled. Make it depend on actual DPT usage
instead of just assuming it based on the modifier.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-3-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Stable-dep-of: 324b70e997aa ("drm/i915: Fix ADL+ tiled plane stride when the POT stride is smaller than the original")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3070f080f9ba18dea92eaa21730f7ab85b5c8f4 ]
Since the plane_state variable is declared outside the scaler_users
loop in intel_atomic_setup_scalers(), and it's never reset back to
NULL inside the loop we may end up calling intel_atomic_setup_scaler()
with a non-NULL plane state for the pipe scaling case. That is bad
because intel_atomic_setup_scaler() determines whether we are doing
plane scaling or pipe scaling based on plane_state!=NULL. The end
result is that we may miscalculate the scaler mode for pipe scaling.
The hardware becomes somewhat upset if we end up in this situation
when scanning out a planar format on a SDR plane. We end up
programming the pipe scaler into planar mode as well, and the
result is a screenfull of garbage.
Fix the situation by making sure we pass the correct plane_state==NULL
when calculating the scaler mode for pipe scaling.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207193441.20206-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit e81144106e21271c619f0c722a09e27ccb8c043d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d4312e2b228ba7a5ac79154458098274ec61e9b ]
In newer hardware versions (i.e. display version >= 14), the second
scaler doesn't support vertical scaling.
The current implementation of the scaling limits is simplified and
only occurs when the planes are created, so we don't know which scaler
is being used.
In order to handle separate scaling limits for horizontal and vertical
scaling, and different limits per scaler, split the checks in two
phases. We first do a simple check during plane creation and use the
best-case scenario (because we don't know the scaler that may be used
at a later point) and then do a more specific check when the scalers
are actually being set up.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221223130509.43245-2-luciano.coelho@intel.com
Stable-dep-of: c3070f080f9b ("drm/i915: Fix intel_atomic_setup_scalers() plane_state handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d656bd259edb89dc1d9938ec5c5389867088546 ]
While the GPIO cdev gpio_ioctl() call is in progress, the kernel can
call gpiochip_remove() which will set gdev->chip to NULL, after which
any subsequent access will cause a crash.
gpio_ioctl() was overlooked by the previous fix to protect syscalls
(bdbbae241a04), so add protection for that.
Fixes: bdbbae241a04 ("gpiolib: protect the GPIO device against being dropped while in use by user-space")
Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")
Fixes: 3c0d9c635ae2 ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL")
Fixes: aad955842d1c ("gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14694179e561b5f2f7e56a0f590e2cb49a9cc7ab ]
Trying to suspend to RAM on SAMA5D27 EVK leads to the following lockdep
warning:
============================================
WARNING: possible recursive locking detected
6.7.0-rc5-wt+ #532 Not tainted
--------------------------------------------
sh/92 is trying to acquire lock:
c3cf306c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100
but task is already holding lock:
c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&irq_desc_lock_class);
lock(&irq_desc_lock_class);
*** DEADLOCK ***
May be due to missing lock nesting notation
6 locks held by sh/92:
#0: c3aa0258 (sb_writers#6){.+.+}-{0:0}, at: ksys_write+0xd8/0x178
#1: c4c2df44 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x138/0x284
#2: c32684a0 (kn->active){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x148/0x284
#3: c232b6d4 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x13c/0x4e8
#4: c387b088 (&dev->mutex){....}-{3:3}, at: __device_suspend+0x1e8/0x91c
#5: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100
stack backtrace:
CPU: 0 PID: 92 Comm: sh Not tainted 6.7.0-rc5-wt+ #532
Hardware name: Atmel SAMA5
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x48
dump_stack_lvl from __lock_acquire+0x19ec/0x3a0c
__lock_acquire from lock_acquire.part.0+0x124/0x2d0
lock_acquire.part.0 from _raw_spin_lock_irqsave+0x5c/0x78
_raw_spin_lock_irqsave from __irq_get_desc_lock+0xe8/0x100
__irq_get_desc_lock from irq_set_irq_wake+0xa8/0x204
irq_set_irq_wake from atmel_gpio_irq_set_wake+0x58/0xb4
atmel_gpio_irq_set_wake from irq_set_irq_wake+0x100/0x204
irq_set_irq_wake from gpio_keys_suspend+0xec/0x2b8
gpio_keys_suspend from dpm_run_callback+0xe4/0x248
dpm_run_callback from __device_suspend+0x234/0x91c
__device_suspend from dpm_suspend+0x224/0x43c
dpm_suspend from dpm_suspend_start+0x9c/0xa8
dpm_suspend_start from suspend_devices_and_enter+0x1e0/0xa84
suspend_devices_and_enter from pm_suspend+0x460/0x4e8
pm_suspend from state_store+0x78/0xe4
state_store from kernfs_fop_write_iter+0x1a0/0x284
kernfs_fop_write_iter from vfs_write+0x38c/0x6f4
vfs_write from ksys_write+0xd8/0x178
ksys_write from ret_fast_syscall+0x0/0x1c
Exception stack(0xc52b3fa8 to 0xc52b3ff0)
3fa0: 00000004 005a0ae8 00000001 005a0ae8 00000004 00000001
3fc0: 00000004 005a0ae8 00000001 00000004 00000004 b6c616c0 00000020 0059d190
3fe0: 00000004 b6c61678 aec5a041 aebf1a26
This warning is raised because pinctrl-at91-pio4 uses chained IRQ. Whenever
a wake up source configures an IRQ through irq_set_irq_wake, it will
lock the corresponding IRQ desc, and then call irq_set_irq_wake on "parent"
IRQ which will do the same on its own IRQ desc, but since those two locks
share the same class, lockdep reports this as an issue.
Fix lockdep false positive by setting a different class for parent and
children IRQ
Fixes: 776180848b57 ("pinctrl: introduce driver for Atmel PIO4 controller")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20231215-lockdep_warning-v1-1-8137b2510ed5@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93cd0597649844a0fe7989839a3202735fb3ae67 ]
Xen only supports modern CPUs even when running a 32-bit kernel, and it now
requires a kernel built for a 64 byte (or larger) cache line:
In file included from <command-line>:
In function 'xen_vcpu_setup',
inlined from 'xen_vcpu_setup_restore' at arch/x86/xen/enlighten.c:111:3,
inlined from 'xen_vcpu_restore' at arch/x86/xen/enlighten.c:141:3:
include/linux/compiler_types.h:435:45: error: call to '__compiletime_assert_287' declared with attribute error: BUILD_BUG_ON failed: sizeof(*vcpup) > SMP_CACHE_BYTES
arch/x86/xen/enlighten.c:166:9: note: in expansion of macro 'BUILD_BUG_ON'
166 | BUILD_BUG_ON(sizeof(*vcpup) > SMP_CACHE_BYTES);
| ^~~~~~~~~~~~
Enforce the dependency with a whitelist of CPU configurations. In normal
distro kernels, CONFIG_X86_GENERIC is enabled, and this works fine. When this
is not set, still allow Xen to be built on kernels that target a 64-bit
capable CPU.
Fixes: db2832309a82 ("x86/xen: fix percpu vcpu_info allocation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Alyssa Ross <hi@alyssa.is>
Link: https://lore.kernel.org/r/20231204084722.3789473-1-arnd@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4cc1cbba5195a4dd497cf2f8f09e7807977d543 ]
Some masters may drive the transfers with low enough latency between
the nak/stop phase of the current command and the start/address phase
of the following command that the interrupts are coalesced by the
time we process them.
Handle the stop conditions before processing SLAVE_MATCH to fix the
complaints that sometimes occur below.
"aspeed-i2c-bus 1e78a040.i2c-bus: irq handled != irq. Expected
0x00000086, but was 0x00000084"
Fixes: f9eb91350bb2 ("i2c: aspeed: added slave support for Aspeed I2C driver")
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f0f01647550daf9cd8752c1656dcb0136d79ce1 ]
When flag mclk_with_tere and mclk_direction_output enabled,
The SAI transmitter or receiver will be enabled in very early
stage, that if FSL_SAI_xMR is set by previous case,
for example previous case is one channel, current case is
two channels, then current case started with wrong xMR in
the beginning, then channel swap happen.
The patch is to clear xMR in hw_free() to avoid such
channel swap issue.
Fixes: 3e4a82612998 ("ASoC: fsl_sai: MCLK bind with TX/RX enable bit")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://msgid.link/r/1702953057-4499-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 025222a9d6d25eee2ad9a1bb5a8b29b34b5ba576 ]
This fixes a problem introduced while fixing ELD reporting with no jack
set.
Most driver using the hdmi-codec will call the 'plugged_cb' callback
directly when registered to report the initial state of the HDMI connector.
With the commit mentionned, this occurs before jack is ready and the
initial report is lost for platforms actually providing a jack for HDMI.
Fix this by storing the hdmi connector status regardless of jack being set
or not and report the last status when jack gets set.
With this, the initial state is reported correctly even if it is
disconnected. This was not done initially and is also a fix.
Fixes: 15be353d55f9 ("ASoC: hdmi-codec: register hpd callback on component probe")
Reported-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Closes: https://lore.kernel.org/alsa-devel/CADYyEwTNyY+fR9SgfDa-g6iiDwkU3MUdPVCYexs2_3wbcM8_vg@mail.gmail.com/
Cc: Hsin-Yi Wang <hsinyi@google.com>
Tested-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20231218145655.134929-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a6b294ab496650e9f270123730df37030911b55 ]
When an afs_volume struct is put, its refcount is reduced to 0 before
the cell->volume_lock is taken and the volume removed from the
cell->volumes tree.
Unfortunately, this means that the lookup code can race and see a volume
with a zero ref in the tree, resulting in a use-after-free:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda
...
RIP: 0010:refcount_warn_saturate+0x7a/0xda
...
Call Trace:
afs_get_volume+0x3d/0x55
afs_create_volume+0x126/0x1de
afs_validate_fc+0xfe/0x130
afs_get_tree+0x20/0x2e5
vfs_get_tree+0x1d/0xc9
do_new_mount+0x13b/0x22e
do_mount+0x5d/0x8a
__do_sys_mount+0x100/0x12a
do_syscall_64+0x3a/0x94
entry_SYSCALL_64_after_hwframe+0x62/0x6a
Fix this by:
(1) When putting, use a flag to indicate if the volume has been removed
from the tree and skip the rb_erase if it has.
(2) When looking up, use a conditional ref increment and if it fails
because the refcount is 0, replace the node in the tree and set the
removal flag.
Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9e01ac8c5ff32669119c40dfdc9e80eb0b7d7aa ]
In afs_update_cell(), ret is the result of the DNS lookup and the errors
are to be handled by a switch - however, the value gets clobbered in
between by setting it to -ENOMEM in case afs_alloc_vlserver_list()
fails.
Fix this by moving the setting of -ENOMEM into the error handling for
OOM failure. Further, only do it if we don't have an alternative error
to return.
Found by Linux Verification Center (linuxtesting.org) with SVACE. Based
on a patch from Anastasia Belova [1].
Fixes: d5c32c89b208 ("afs: Fix cell DNS lookup")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Anastasia Belova <abelova@astralinux.ru>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: lvc-project@linuxtesting.org
Link: https://lore.kernel.org/r/20231221085849.1463-1-abelova@astralinux.ru/ [1]
Link: https://lore.kernel.org/r/1700862.1703168632@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39299bdd2546688d92ed9db4948f6219ca1b9542 ]
If a key has an expiration time, then when that time passes, the key is
left around for a certain amount of time before being collected (5 mins by
default) so that EKEYEXPIRED can be returned instead of ENOKEY. This is a
problem for DNS keys because we want to redo the DNS lookup immediately at
that point.
Fix this by allowing key types to be marked such that keys of that type
don't have this extra period, but are reclaimed as soon as they expire and
turn this on for dns_resolver-type keys. To make this easier to handle,
key->expiry is changed to be permanent if TIME64_MAX rather than 0.
Furthermore, give such new-style negative DNS results a 1s default expiry
if no other expiry time is set rather than allowing it to stick around
indefinitely. This shouldn't be zero as ls will follow a failing stat call
immediately with a second with AT_SYMLINK_NOFOLLOW added.
Fixes: 1a4240f4764a ("DNS: Separate out CIFS DNS Resolver code")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: Wang Lei <wang840925@gmail.com>
cc: Jeff Layton <jlayton@redhat.com>
cc: Steve French <smfrench@gmail.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jarkko Sakkinen <jarkko@kernel.org>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: linux-cifs@vger.kernel.org
cc: linux-nfs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: keyrings@vger.kernel.org
cc: netdev@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24ab059d2ebd62fdccc43794796f6ffbabe49ebc ]
Some drivers might misbehave if TSO packets get too big.
GVE for instance uses a 16bit field in its TX descriptor,
and will do bad things if a packet is bigger than 2^16 bytes.
Linux TCP stack honors dev->gso_max_size, but there are
other ways for too big packets to reach an ndo_start_xmit()
handler : virtio_net, af_packet, GRO...
Add a generic check in gso_features_check() and fallback
to GSO when needed.
gso_max_size was added in the blamed commit.
Fixes: 82cc1a7a5687 ("[NET]: Add per-connection option to set max TSO frame size")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231219125331.4127498-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74cef6872ceaefb5b6c5c60641371ea28702d358 ]
In the afs dynamic root directory, the ->lookup() function does a DNS check
on the cell being asked for and if the DNS upcall reports an error it will
report an error back to userspace (typically ENOENT).
However, if a failed DNS upcall returns a new-style result, it will return
a valid result, with the status field set appropriately to indicate the
type of failure - and in that case, dns_query() doesn't return an error and
we let stat() complete with no error - which can cause confusion in
userspace as subsequent calls that trigger d_automount then fail with
ENOENT.
Fix this by checking the status result from a valid dns_query() and
returning an error if it indicates a failure.
Fixes: bbb4c4323a4d ("dns: Allow the dns resolver to retrieve a server set")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216637
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71f8b55bc30e82d6355e07811213d847981a32e2 ]
Fix the afs dynamic root's d_delete function to always delete unused
dentries rather than only deleting them if they're positive. With things
as they stand upstream, negative dentries stemming from failed DNS lookups
stick around preventing retries.
Fixes: 66c7e1d319a5 ("afs: Split the dynroot stuff out and give it its own ops tables")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01a564bab4876007ce35f312e16797dfe40e4823 ]
I got the below warning trace:
WARNING: CPU: 4 PID: 4056 at net/core/dev.c:11066 unregister_netdevice_many_notify
CPU: 4 PID: 4056 Comm: ip Not tainted 6.7.0-rc4+ #15
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:unregister_netdevice_many_notify+0x9a4/0x9b0
Call Trace:
rtnl_dellink
rtnetlink_rcv_msg
netlink_rcv_skb
netlink_unicast
netlink_sendmsg
__sock_sendmsg
____sys_sendmsg
___sys_sendmsg
__sys_sendmsg
do_syscall_64
entry_SYSCALL_64_after_hwframe
It can be repoduced via:
ip netns add ns1
ip netns exec ns1 ip link add bond0 type bond mode 0
ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2
ip netns exec ns1 ip link set bond_slave_1 master bond0
[1] ip netns exec ns1 ethtool -K bond0 rx-vlan-filter off
[2] ip netns exec ns1 ip link add link bond_slave_1 name bond_slave_1.0 type vlan id 0
[3] ip netns exec ns1 ip link add link bond0 name bond0.0 type vlan id 0
[4] ip netns exec ns1 ip link set bond_slave_1 nomaster
[5] ip netns exec ns1 ip link del veth2
ip netns del ns1
This is all caused by command [1] turning off the rx-vlan-filter function
of bond0. The reason is the same as commit 01f4fd270870 ("bonding: Fix
incorrect deletion of ETH_P_8021AD protocol vid from slaves"). Commands
[2] [3] add the same vid to slave and master respectively, causing
command [4] to empty slave->vlan_info. The following command [5] triggers
this problem.
To fix this problem, we should add VLAN_FILTER feature checks in
vlan_vids_add_by_dev() and vlan_vids_del_by_dev() to prevent incorrect
addition or deletion of vlan_vid information.
Fixes: 348a1443cc43 ("vlan: introduce functions to do mass addition/deletion of vids by another device")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5812c68d849505ea657f653446512b85887f813 ]
Turning on -Wstringop-overflow globally exposed a misleading compiler
warning in bluetooth:
net/bluetooth/hci_event.c: In function 'hci_cc_read_class_of_dev':
net/bluetooth/hci_event.c:524:9: error: 'memcpy' writing 3 bytes into a
region of size 0 overflows the destination [-Werror=stringop-overflow=]
524 | memcpy(hdev->dev_class, rp->dev_class, 3);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The problem here is the check for hdev being NULL in bt_dev_dbg() that
leads the compiler to conclude that hdev->dev_class might be an invalid
pointer access.
Add another explicit check for the same condition to make sure gcc sees
this cannot happen.
Fixes: a9de9248064b ("[Bluetooth] Switch from OGF+OCF to using only opcodes")
Fixes: 1b56c90018f0 ("Makefile: Enable -Wstringop-overflow globally")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
