IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 5f449e245e5b0d9d63eef6c8968fbdc3a8594407 upstream.
In COMPAT mode, the STACK_TOP is DEFAULT_MAP_WINDOW (0x80000000), but
the TASK_SIZE is 0x7fff000. When the user stack is upon 0x7fff000, it
will cause a user segment fault. Sometimes, it would cause boot
failure when the whole rootfs is rv32.
Freeing unused kernel image (initmem) memory: 2236K
Run /sbin/init as init process
Starting init: /sbin/init exists but couldn't execute it (error -14)
Run /etc/init as init process
...
Increase the TASK_SIZE to cover STACK_TOP.
Cc: stable@vger.kernel.org
Fixes: add2cc6b6515 ("RISC-V: mm: Restrict address space for sv39,sv48,sv57")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231222115703.2404036-2-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 97b7ac69be2e5a683e898f5267f659fde52efdd5 upstream.
When the task is in COMPAT mode, the arch_get_mmap_end should be 2GB,
not TASK_SIZE_64. The TASK_SIZE has contained is_compat_mode()
detection, so change the definition of STACK_TOP_MAX to TASK_SIZE
directly.
Cc: stable@vger.kernel.org
Fixes: add2cc6b6515 ("RISC-V: mm: Restrict address space for sv39,sv48,sv57")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231222115703.2404036-3-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 206c857dd17d4d026de85866f1b5f0969f2a109e upstream.
In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with
mtk_jpeg_job_timeout_work.
In mtk_jpeg_dec_device_run, if error happens in
mtk_jpeg_set_dec_dst, it will finally start the worker while
mark the job as finished by invoking v4l2_m2m_job_finish.
There are two methods to trigger the bug. If we remove the
module, it which will call mtk_jpeg_remove to make cleanup.
The possible sequence is as follows, which will cause a
use-after-free bug.
CPU0 CPU1
mtk_jpeg_dec_... |
start worker |
|mtk_jpeg_job_timeout_work
mtk_jpeg_remove |
v4l2_m2m_release |
kfree(m2m_dev); |
|
| v4l2_m2m_get_curr_priv
| m2m_dev->curr_ctx //use
If we close the file descriptor, which will call mtk_jpeg_release,
it will have a similar sequence.
Fix this bug by starting timeout worker only if started jpegdec worker
successfully. Then v4l2_m2m_job_finish will only be called in
either mtk_jpeg_job_timeout_work or mtk_jpeg_dec_device_run.
Fixes: b2f0d2724ba4 ("[media] vcodec: mediatek: Add Mediatek JPEG Decoder Driver")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38e1857933def4b3fafc28cc34ff3bbc84cad2c3 upstream.
In mtk_jpegdec_worker, if error occurs in mtk_jpeg_set_dec_dst, it
will start the timeout worker and invoke v4l2_m2m_job_finish at
the same time. This will break the logic of design for there should
be only one function to call v4l2_m2m_job_finish. But now the timeout
handler and mtk_jpegdec_worker will both invoke it.
Fix it by start the worker only if mtk_jpeg_set_dec_dst successfully
finished.
Fixes: da4ede4b7fd6 ("media: mtk-jpeg: move data/code inside CONFIG_OF blocks")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b33cb0cbe2893b96ecbfa16254407153f4b55d16 upstream.
Use a copy of the struct v4l2_subdev_format when propagating
format from the sink to source pad in order to avoid impacting the
sink format returned to the application.
Thanks to Jacopo Mondi for pointing the issue.
Fixes: 6c01e6f3f27b ("media: st-mipid02: Propagate format from sink to source pad")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 84a6be7db9050dd2601c9870f65eab9a665d2d5d upstream.
There is no need to duplicate what SPI core or individual controller
drivers already do, i.e. mapping the buffers for DMA capable transfers.
Note, that the code, besides its redundancy, was buggy: strictly speaking
there is no guarantee, while it's true for those which can use this code
(see below), that the SPI host controller _is_ the device which does DMA.
Also see the Link tags below.
Additional notes. Currently only two SPI host controller drivers may use
premapped (by the user) DMA buffers:
- drivers/spi/spi-au1550.c
- drivers/spi/spi-fsl-spi.c
Both of them have DMA mapping support code. I don't expect that SPI host
controller code is worse than what has been done in mmc_spi. Hence I do
not expect any regressions here. Otherwise, I'm pretty much sure these
regressions have to be fixed in the respective drivers, and not here.
That said, remove all related pieces of DMA mapping code from mmc_spi.
Link: https://lore.kernel.org/linux-mmc/c73b9ba9-1699-2aff-e2fd-b4b4f292a3ca@raspberrypi.org/
Link: https://stackoverflow.com/questions/67620728/mmc-spi-issue-not-able-to-setup-mmc-sd-card-in-linux
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231207221901.3259962-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d0c8d0aef6355660b6775d57ccd5d4ea2e15802 upstream.
Field Firmware Update (ffu) may use close-ended or open ended sequence.
Each such sequence is comprised of a write commands enclosed between 2
switch commands - to and from ffu mode. So for the close-ended case, it
will be: cmd6->cmd23-cmd25-cmd6.
Some host controllers however, get confused when multi-block rw is sent
without sbc, and may generate auto-cmd12 which breaks the ffu sequence.
I encountered this issue while testing fwupd (github.com/fwupd/fwupd)
on HP Chromebook x2, a qualcomm based QC-7c, code name - strongbad.
Instead of a quirk, or hooking the request function of the msm ops,
it would be better to fix the ioctl handling and make it use mrq.sbc
instead of issuing SET_BLOCK_COUNT separately.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231129092535.3278-1-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 608ca5a60ee47b48fec210aeb7a795a64eb5dcee upstream.
For dmabuf import users to be able to use the vaddr from another
videobuf2-dma-sg source, the exporter needs to set a proper vaddr on
vb2_dma_sg_dmabuf_ops_vmap callback. This patch adds vmap on map if
buf->vaddr was not set.
Cc: stable@kernel.org
Fixes: 7938f4218168 ("dma-buf-map: Rename to iosys-map")
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5889d6ede53bc17252f79c142387e007224aa554 upstream.
The code currently leaks the absolute path of the ABI files into the
rendered documentation.
There exists code to prevent this, but it is not effective when an
absolute path is passed, which it is when $srctree is used.
I consider this to be a minimal, stop-gap fix; a better fix would strip
off the actual prefix instead of hacking it off with a regex.
Link: https://mastodon.social/@vegard/111677490643495163
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231231235959.3342928-1-vegard.nossum@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3231dd5862779c2e15633c96133a53205ad660ce upstream.
The kernel-abi directive passes its argument straight to the shell.
This is unfortunate and unnecessary.
Let's always use paths relative to $srctree/Documentation/ and use
subprocess.check_call() instead of subprocess.Popen(shell=True).
This also makes the code shorter.
Link: https://fosstodon.org/@jani/111676532203641247
Reported-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231231235959.3342928-2-vegard.nossum@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e9cdebbe23f1aa9a1caea169862f479ab3fa2773 upstream.
Recent changes to kernel_connect() and kernel_bind() ensure that
callers are insulated from changes to the address parameter made by BPF
SOCK_ADDR hooks. This patch wraps direct calls to ops->connect() and
ops->bind() with kernel_connect() and kernel_bind() to protect callers
in such cases.
Link: https://lore.kernel.org/netdev/9944248dba1bce861375fcce9de663934d933ba9.camel@redhat.com/
Fixes: d74bad4e74ee ("bpf: Hooks for sys_connect")
Fixes: 4fbac77d2d09 ("bpf: Hooks for sys_bind")
Cc: stable@vger.kernel.org
Signed-off-by: Jordan Rife <jrife@google.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1bb47a31dff6d4b34fb14e99850860ee74bb003 upstream.
Some ioctl commands do not require ioctl permission, but are routed to
other permissions such as FILE_GETATTR or FILE_SETATTR. This routing is
done by comparing the ioctl cmd to a set of 64-bit flags (FS_IOC_*).
However, if a 32-bit process is running on a 64-bit kernel, it emits
32-bit flags (FS_IOC32_*) for certain ioctl operations. These flags are
being checked erroneously, which leads to these ioctl operations being
routed to the ioctl permission, rather than the correct file
permissions.
This was also noted in a RED-PEN finding from a while back -
"/* RED-PEN how should LSM module know it's handling 32bit? */".
This patch introduces a new hook, security_file_ioctl_compat(), that is
called from the compat ioctl syscall. All current LSMs have been changed
to support this hook.
Reviewing the three places where we are currently using
security_file_ioctl(), it appears that only SELinux needs a dedicated
compat change; TOMOYO and SMACK appear to be functional without any
change.
Cc: stable@vger.kernel.org
Fixes: 0b24dcb7f2f7 ("Revert "selinux: simplify ioctl checking"")
Signed-off-by: Alfred Piccioni <alpic@google.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: subject tweak, line length fixes, and alignment corrections]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 710dd03464e4ab5b3d329768388b165d61958577 upstream.
The USB SS PHY interrupt needs to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states.
Fixes: fea4b41022f3 ("ARM: dts: qcom: sdx55: Add USB3 and PHY support")
Cc: stable@vger.kernel.org # 5.12
Cc: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231213173131.29436-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 047b2edc35b8db22354b4fba37818b548fc18896 upstream.
The USB SS PHY interrupt needs to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states.
Fixes: 07c8ded6e373 ("arm64: dts: qcom: add sdm670 and pixel 3a device trees")
Cc: stable@vger.kernel.org # 6.2
Cc: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20231214074319.11023-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c42d12ea105f67b0f137f1e52d5c59d13fe12b1f upstream.
The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.
A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.
Fixes: de3b3de30999 ("arm64: dts: qcom: sdm670: fix USB wakeup interrupt types")
Fixes: 07c8ded6e373 ("arm64: dts: qcom: add sdm670 and pixel 3a device trees")
Cc: stable@vger.kernel.org # 6.2
Cc: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20231214074319.11023-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0afa885d42d05d30161ab8eab1ebacd993edb82b upstream.
The USB SS PHY interrupt needs to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states.
Fixes: b080f53a8f44 ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes")
Cc: stable@vger.kernel.org # 6.5
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231214074319.11023-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 687d402bb350b392fa330e9d9d1b917777ee9ed1 upstream.
The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.
A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.
Fixes: 0dc0f6da3d43 ("arm64: dts: qcom: sc8180x: fix USB wakeup interrupt types")
Fixes: b080f53a8f44 ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes")
Cc: stable@vger.kernel.org # 6.5
Cc: Vinod Koul <vkoul@kernel.org>
Reported-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213173403.29544-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc4e1da491b84ca05339a19893884cda78f74aef upstream.
The USB SS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states.
Fixes: 0c9dde0d2015 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes")
Fixes: b33d2868e8d3 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
Cc: stable@vger.kernel.org # 5.10
Cc: Jack Pham <quic_jackp@quicinc.com>
Cc: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213173403.29544-6-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 134de5e831775e8b178db9b131c1d3769a766982 upstream.
The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.
A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.
Fixes: 54524b6987d1 ("arm64: dts: qcom: sm8150: fix USB wakeup interrupt types")
Fixes: 0c9dde0d2015 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes")
Fixes: b33d2868e8d3 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
Cc: stable@vger.kernel.org # 5.10
Cc: Jack Pham <quic_jackp@quicinc.com>
Cc: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213173403.29544-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 971f5d8b0618d09db75184ddd8cca0767514db5d upstream.
The USB SS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states.
Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Cc: stable@vger.kernel.org # 4.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213173403.29544-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 204f9ed4bad6293933179517624143b8f412347c upstream.
The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.
A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.
Fixes: 84ad9ac8d9ca ("arm64: dts: qcom: sdm845: fix USB wakeup interrupt types")
Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Cc: stable@vger.kernel.org # 4.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213173403.29544-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de95f139394a5ed82270f005bc441d2e7c1e51b7 upstream.
The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.
A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.
Fixes: d0ec3c4c11c3 ("ARM: dts: qcom: sdx55: fix USB wakeup interrupt types")
Fixes: fea4b41022f3 ("ARM: dts: qcom: sdx55: Add USB3 and PHY support")
Cc: stable@vger.kernel.org # 5.12
Cc: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231213173131.29436-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc1ec484f2d0f464ad11b56fe3de2589c23f73ec upstream.
Add the missing vio-supply to all usages of the AW2013 LED controller
to ensure that the regulator needed for pull-up of the interrupt and
I2C lines is really turned on. While this seems to have worked fine so
far some of these regulators are not guaranteed to be always-on. For
example, pm8916_l6 is typically turned off together with the display
if there aren't any other devices (e.g. sensors) keeping it always-on.
Cc: stable@vger.kernel.org # 6.6
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20231204-qcom-aw2013-vio-v1-1-5d264bb5c0b2@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0dc0f6da3d43da8d2297105663e51ecb01b6f790 upstream.
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Fixes: b080f53a8f44 ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes")
Cc: stable@vger.kernel.org # 6.5
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-7-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54524b6987d1fffe64cbf3dded1b2fa6b903edf9 upstream.
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Fixes: 0c9dde0d2015 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes")
Fixes: b33d2868e8d3 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
Cc: stable@vger.kernel.org # 5.10
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Jack Pham <quic_jackp@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Jack Pham <quic_jackp@quicinc.com>
Link: https://lore.kernel.org/r/20231120164331.8116-11-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de3b3de30999106549da4df88a7963d0ac02b91e upstream.
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Fixes: 07c8ded6e373 ("arm64: dts: qcom: add sdm670 and pixel 3a device trees")
Cc: stable@vger.kernel.org # 6.2
Cc: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20231120164331.8116-8-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 84ad9ac8d9ca29033d589e79a991866b38e23b85 upstream.
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Cc: stable@vger.kernel.org # 4.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-9-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9b956999bf725fd62613f719c3178fdbee6e5f47 upstream.
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Fixes: 0b766e7fe5a2 ("arm64: dts: qcom: sc7180: Add USB related nodes")
Cc: stable@vger.kernel.org # 5.10
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bbda9421f316efdaef5dbf642e24925ef7de130 upstream.
The blsp_dma controller is shared between the different subsystems,
which is why it is already initialized by the firmware. We should not
reinitialize it from Linux to avoid potential other users of the DMA
engine to misbehave.
In mainline this can be described using the "qcom,controlled-remotely"
property. In the downstream/vendor kernel from Qualcomm there is an
opposite "qcom,managed-locally" property. This property is *not* set
for the qcom,sps-dma@7884000 [1] so adding "qcom,controlled-remotely"
upstream matches the behavior of the downstream/vendor kernel.
Adding this seems to fix some weird issues with UART where both
input/output becomes garbled with certain obscure firmware versions on
some devices.
[1]: https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/blob/LA.BR.1.2.9.1-02310-8x16.0/arch/arm/boot/dts/qcom/msm8939-common.dtsi#L866-872
Cc: stable@vger.kernel.org # 6.5
Fixes: 61550c6c156c ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231204-msm8916-blsp-dma-remote-v1-2-3e49c8838c8d@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c45b6ddbcff01f9934d11802010cfeb0879e693 upstream.
The blsp_dma controller is shared between the different subsystems,
which is why it is already initialized by the firmware. We should not
reinitialize it from Linux to avoid potential other users of the DMA
engine to misbehave.
In mainline this can be described using the "qcom,controlled-remotely"
property. In the downstream/vendor kernel from Qualcomm there is an
opposite "qcom,managed-locally" property. This property is *not* set
for the qcom,sps-dma@7884000 [1] so adding "qcom,controlled-remotely"
upstream matches the behavior of the downstream/vendor kernel.
Adding this seems to fix some weird issues with UART where both
input/output becomes garbled with certain obscure firmware versions on
some devices.
[1]: https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/blob/LA.BR.1.2.9.1-02310-8x16.0/arch/arm/boot/dts/qcom/msm8916.dtsi#L1466-1472
Cc: stable@vger.kernel.org # 6.5
Fixes: a0e5fb103150 ("arm64: dts: qcom: Add msm8916 BLSP device nodes")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231204-msm8916-blsp-dma-remote-v1-1-3e49c8838c8d@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44de8996ed5a10f08f2fe947182da6535edcfae5 upstream.
The QoS blocks saved/restored when toggling the PD_USB power domain are
clocked by ACLK_USB. Attempting to access these memory regions without
that clock running will result in an indefinite CPU stall.
The PD_USB node wasn't specifying this clock dependency, resulting in
hangs when trying to toggle the power domain (either on or off), unless
we get "lucky" and have ACLK_USB running for another reason at the time.
This "luck" can result from the bootloader leaving USB powered/clocked,
and if no built-in driver wants USB, Linux will disable the unused
PD+CLK on boot when {pd,clk}_ignore_unused aren't given. This can also
be unlucky because the two cleanup tasks run in parallel and race: if
the CLK is disabled first, the PD deactivation stalls the boot. In any
case, the PD cannot then be reenabled (if e.g. the driver loads later)
once the clock has been stopped.
Fix this by specifying a dependency on ACLK_USB, instead of only
ACLK_USB_ROOT. The child-parent relationship means the former implies
the latter anyway.
Fixes: c9211fa2602b8 ("arm64: dts: rockchip: Add base DT for rk3588 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://lore.kernel.org/r/20231216021019.1543811-1-CFSworks@gmail.com
[changed to only include the missing clock, not dropping the root-clocks]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 84228d5e29dbc7a6be51e221000e1d122125826c upstream.
The kernel hangs for a good 12 seconds without any info being printed to
dmesg, very early in the boot process, if this regulator is not enabled.
Force-enable it to work around this issue, until we know more about the
underlying problem.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Fixes: 8620cc2f99b7 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2")
Cc: stable@vger.kernel.org # v5.8+
Link: https://lore.kernel.org/r/20231206221556.15348-2-paul@crapouillou.net
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0ec3c4c11c3b30e1f2d344973b2a7bf0f986734 upstream.
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Fixes: fea4b41022f3 ("ARM: dts: qcom: sdx55: Add USB3 and PHY support")
Cc: stable@vger.kernel.org # 5.12
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 663affdb12b3e26c77d103327cf27de720c8117e upstream.
The sc8280xp Display Port PHYs can be used in either DP or eDP mode and
this is configured using the devicetree compatible string which defaults
to DP mode in the SoC dtsi.
Override the default compatible string for the CRD eDP PHY node so that
the eDP settings are used.
Fixes: 4a883a8d80b5 ("arm64: dts: qcom: sc8280xp-crd: Enable EDP")
Cc: stable@vger.kernel.org # 6.3
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231016080658.6667-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b76bbf835d8945080b22b52fc1e6f41cde06865d upstream.
Newer variants of Ixora boards require a power-up delay when powering up
the CAN transceiver of up to 1ms.
Cc: stable@vger.kernel.org
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6472036581f947109b20664121db1d143e916f0b upstream.
Make sure to start the kthread to check the power button on qemu as
well if the power button address was provided.
This fixes the qemu built-in system_powerdown runtime command.
Fixes: d0c219472980 ("parisc/power: Add power soft-off when running on qemu")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 735ae74f73e55c191d48689bd11ff4a06ea0508f upstream.
When running with narrow firmware (64-bit kernel using a 32-bit
firmware), extend PDC addresses into the 0xfffffff0.00000000
region instead of the 0xf0f0f0f0.00000000 region.
This fixes the power button on the C3700 machine in qemu (64-bit CPU
with 32-bit firmware), and my assumption is that the previous code was
really never used (because most 64-bit machines have a 64-bit firmware),
or it just worked on very old machines because they may only decode
40-bit of virtual addresses.
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b89b6a863dd53bc70d8e52d50f9cfaef8ef5e9c9 upstream.
Protect WP accesses such that multiple threads queueing buffers for
incoming data do not race.
Meanwhile, if CONFIG_TRACE_IRQFLAGS is enabled, irq will be enabled once
__local_bh_enable_ip is called as part of write_unlock_bh. Hence, let's
take irqsave lock after TRE is generated to avoid running write_unlock_bh
when irqsave lock is held.
Cc: stable@vger.kernel.org
Fixes: 189ff97cca53 ("bus: mhi: core: Add support for data transfer")
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1702276972-41296-2-git-send-email-quic_qianyu@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01bd694ac2f682fb8017e16148b928482bc8fa4b upstream.
Ensure read and write locks for the channel are not taken in succession by
dropping the read lock from parse_xfer_event() such that a callback given
to client can potentially queue buffers and acquire the write lock in that
process. Any queueing of buffers should be done without channel read lock
acquired as it can result in multiple locks and a soft lockup.
Cc: <stable@vger.kernel.org> # 5.7
Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1702276972-41296-3-git-send-email-quic_qianyu@quicinc.com
[mani: added fixes tag and cc'ed stable]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eff9704f5332a13b08fbdbe0f84059c9e7051d5f upstream.
Though we do check the event ring read pointer by "is_valid_ring_ptr"
to make sure it is in the buffer range, but there is another risk the
pointer may be not aligned. Since we are expecting event ring elements
are 128 bits(struct mhi_ring_element) aligned, an unaligned read pointer
could lead to multiple issues like DoS or ring buffer memory corruption.
So add a alignment check for event ring read pointer.
Fixes: ec32332df764 ("bus: mhi: core: Sanity check values from remote device before use")
cc: stable@vger.kernel.org
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231031-alignment_check-v2-1-1441db7c5efd@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e1a9ae45736989c972a8d1c151bc390678ae6205 upstream.
max_mapnr variable is utilized in the pfn_valid() method in order to
determine the upper PFN space boundary. Having it uninitialized
effectively makes any PFN passed to that method invalid. That in its turn
causes the kernel mm-subsystem occasion malfunctions even after the
max_mapnr variable is actually properly updated. For instance,
pfn_valid() is called in the init_unavailable_range() method in the
framework of the calls-chain on MIPS:
setup_arch()
+-> paging_init()
+-> free_area_init()
+-> memmap_init()
+-> memmap_init_zone_range()
+-> init_unavailable_range()
Since pfn_valid() always returns "false" value before max_mapnr is
initialized in the mem_init() method, any flatmem page-holes will be left
in the poisoned/uninitialized state including the IO-memory pages. Thus
any further attempts to map/remap the IO-memory by using MMU may fail.
In particular it happened in my case on attempt to map the SRAM region.
The kernel bootup procedure just crashed on the unhandled unaligned access
bug raised in the __update_cache() method:
> Unhandled kernel unaligned access[#1]:
> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc1-XXX-dirty #2056
> ...
> Call Trace:
> [<8011ef9c>] __update_cache+0x88/0x1bc
> [<80385944>] ioremap_page_range+0x110/0x2a4
> [<80126948>] ioremap_prot+0x17c/0x1f4
> [<80711b80>] __devm_ioremap+0x8c/0x120
> [<80711e0c>] __devm_ioremap_resource+0xf4/0x218
> [<808bf244>] sram_probe+0x4f4/0x930
> [<80889d20>] platform_probe+0x68/0xec
> ...
Let's fix the problem by initializing the max_mapnr variable as soon as
the required data is available. In particular it can be done right in the
paging_init() method before free_area_init() is called since all the PFN
zone boundaries have already been calculated by that time.
Cc: stable@vger.kernel.org
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9bd10c43456d16abd97b717446f51afb3b88411 upstream.
When a queue is unbound from the vfio_ap device driver, it is reset to
ensure its crypto data is not leaked when it is bound to another device
driver. If the queue is unbound due to the fact that the adapter or domain
was removed from the host's AP configuration, then attempting to reset it
will fail with response code 01 (APID not valid) getting returned from the
reset command. Let's ensure that the queue is assigned to the host's
configuration before resetting it.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: "Jason J. Herne" <jjherne@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: eeb386aeb5b7 ("s390/vfio-ap: handle config changed and scan complete notification")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115185441.31526-7-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f009cfa466558b7dfe97f167ba1875d6f9ea4c07 upstream.
When a queue is unbound from the vfio_ap device driver, if that queue is
assigned to a guest's AP configuration, its associated adapter is removed
because queues are defined to a guest via a matrix of adapters and
domains; so, it is not possible to remove a single queue.
If an adapter is removed from the guest's AP configuration, all associated
queues must be reset to prevent leaking crypto data should any of them be
assigned to a different guest or device driver. The one caveat is that if
the queue is being removed because the adapter or domain has been removed
from the host's AP configuration, then an attempt to reset the queue will
fail with response code 01, AP-queue number not valid; so resetting these
queues should be skipped.
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Fixes: 09d31ff78793 ("s390/vfio-ap: hot plug/unplug of AP devices when probed/removed")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115185441.31526-6-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f848cba767e59f8d5c54984b1d45451aae040d50 upstream.
When filtering the adapters from the configuration profile for a guest to
create or update a guest's AP configuration, if the APID of an adapter and
the APQI of a domain identify a queue device that is not bound to the
vfio_ap device driver, the APID of the adapter will be filtered because an
individual APQN can not be filtered due to the fact the APQNs are assigned
to an AP configuration as a matrix of APIDs and APQIs. Consequently, a
guest will not have access to all of the queues associated with the
filtered adapter. If the queues are subsequently made available again to
the guest, they should re-appear in a reset state; so, let's make sure all
queues associated with an adapter unplugged from the guest are reset.
In order to identify the set of queues that need to be reset, let's allow a
vfio_ap_queue object to be simultaneously stored in both a hashtable and a
list: A hashtable used to store all of the queues assigned
to a matrix mdev; and/or, a list used to store a subset of the queues that
need to be reset. For example, when an adapter is hot unplugged from a
guest, all guest queues associated with that adapter must be reset. Since
that may be a subset of those assigned to the matrix mdev, they can be
stored in a list that can be passed to the vfio_ap_mdev_reset_queues
function.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: 48cae940c31d ("s390/vfio-ap: refresh guest's APCB by filtering AP resources assigned to mdev")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115185441.31526-5-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 774d10196e648e2c0b78da817f631edfb3dfa557 upstream.
When adapters and/or domains are added to the host's AP configuration, this
may result in multiple queue devices getting created and probed by the
vfio_ap device driver. For each queue device probed, the matrix of adapters
and domains assigned to a matrix mdev will be filtered to update the
guest's APCB. If any adapters or domains get added to or removed from the
APCB, the guest's AP configuration will be dynamically updated (i.e., hot
plug/unplug). To dynamically update the guest's configuration, its VCPUs
must be taken out of SIE for the period of time it takes to make the
update. This is disruptive to the guest's operation and if there are many
queues probed due to a change in the host's AP configuration, this could be
troublesome. The problem is exacerbated by the fact that the
'on_scan_complete' callback also filters the mdev's matrix and updates
the guest's AP configuration.
In order to reduce the potential amount of disruption to the guest that may
result from a change to the host's AP configuration, let's bypass the
filtering of the matrix and updating of the guest's AP configuration in the
probe callback - if due to a host config change - and defer it until the
'on_scan_complete' callback is invoked after the AP bus finishes its device
scan operation. This way the filtering and updating will be performed only
once regardless of the number of queues added.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: 48cae940c31d ("s390/vfio-ap: refresh guest's APCB by filtering AP resources assigned to mdev")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115185441.31526-4-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
