IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit d9407ff11809c6812bb84fe7be9c1367d758e5c8 ]
The PCIe reset handlers can run at the same time as the
health thread. This can cause the health thread to
stomp on the PCIe reset. Fix this by preventing the
health thread from running while a PCIe reset is happening.
As part of this use timer_shutdown_sync() during reset and
remove to make sure the timer doesn't ever get rearmed.
Fixes: ffa55858330f ("pds_core: implement pci reset handlers")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240129234035.69802-2-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b53cc6144a3f6c8b56afcdec89d81195c9b0dc69 upstream.
The PA gain can be set in steps of 1.5 dB from -3 dB to 18 dB, that is,
in 15 levels.
Fix the dB values for the PA volume control as experiments using wsa8835
show that the first 16 levels all map to the same lowest gain while the
last three map to the highest gain.
These values specifically need to be correct for the sound server to
provide proper volume control.
Note that level 0 (-3 dB) does not mute the PA so the mute flag should
also not be set.
Fixes: cdb09e623143 ("ASoC: codecs: wsa883x: add control, dapm widgets and map")
Cc: stable@vger.kernel.org # 6.0
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240119112420.7446-2-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46188db080bd1df7d2d28031b89e56f2fdbabd67 upstream.
The LPASS WSA macro codec driver is updating the digital gain settings
behind the back of user space on DAPM events if companding has been
enabled.
As compander control is exported to user space, this can result in the
digital gain setting being incremented (or decremented) every time the
sound server is started and the codec suspended depending on what the
UCM configuration looks like.
Soon enough playback will become distorted (or too quiet).
This is specifically a problem on the Lenovo ThinkPad X13s as this
bypasses the limit for the digital gain setting that has been set by the
machine driver.
Fix this by simply dropping the compander gain offset hack. If someone
cares about modelling the impact of the compander setting this can
possibly be done by exporting it as a volume control later.
Note that the volume registers still need to be written after enabling
clocks in order for any prior updates to take effect.
Fixes: 2c4066e5d428 ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route")
Cc: stable@vger.kernel.org # 5.11
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240119112420.7446-4-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d0e8bdfa4a57099dc7230952a460903f2e2f8de upstream.
The lowest headphones volume setting does not mute so the leave the TLV
mute flag unset.
This is specifically needed to let the sound server use the lowest gain
setting.
Fixes: c03226ba15fe ("ASoC: codecs: wcd938x: fix dB range for HPHL and HPHR")
Cc: <stable@vger.kernel.org> # 6.5
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240122091130.27463-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c481016bb4f8a9c059c39ac06e7b65e233a61f6a upstream.
The UCM configuration for the Lenovo ThinkPad X13s has up until now
been setting the speaker PA volume to the minimum -3 dB when enabling
the speakers, but this does not prevent the user from increasing the
volume further.
Limit the digital gain and PA volumes to a combined -3 dB in the machine
driver to reduce the risk of speaker damage until we have active speaker
protection in place (or higher safe levels have been established).
Note that the PA volume limit cannot be set lower than 0 dB or
PulseAudio gets confused when the first 16 levels all map to -3 dB.
Also note that this will probably need to be generalised using
machine-specific limits, but a common limit should do for now.
Cc: <stable@vger.kernel.org> # 6.5
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240122181819.4038-3-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 486058f42a4728053ae69ebbf78e9731d8ce6f8b upstream.
As suggested by Paolo in link[1], if the memory allocation fails, the mm
layer will emit a lot warning comprising the backtrace, so remove the
print.
[1] https://lore.kernel.org/all/20231118081653.1481260-1-shaozhengchao@huawei.com/
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56925f389e152dcb8d093435d43b78a310539c23 upstream.
With previous patch, one of subtests in test_btf_id becomes
flaky and may fail. The following is a failing example:
Error: #26 btf
Error: #26/174 btf/BTF ID
Error: #26/174 btf/BTF ID
btf_raw_create:PASS:check 0 nsec
btf_raw_create:PASS:check 0 nsec
test_btf_id:PASS:check 0 nsec
...
test_btf_id:PASS:check 0 nsec
test_btf_id:FAIL:check BTF lingersdo_test_get_info:FAIL:check failed: -1
The test tries to prove a btf_id not available after the map is closed.
But btf_id is freed only after workqueue and a rcu grace period, compared
to previous case just after a rcu grade period.
Depending on system workload, workqueue could take quite some time
to execute function bpf_map_free_deferred() which may cause the test failure.
Instead of adding arbitrary delays, let us remove the logic to
check btf_id availability after map is closed.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231214203820.1469402-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5056c596c3d1848021a4eaa76ee42f4c05c50346 upstream.
Machines which have more than 8 nodes fail to boot SMP after commit
a2ccf46333d7b2cf96 ("LoongArch/smp: Call rcutree_report_cpu_starting()
earlier"). Because such machines use tlb-based per-cpu base address
rather than dmw-based per-cpu base address, resulting per-cpu variables
can only be accessed after tlb_init(). But rcutree_report_cpu_starting()
is now called before tlb_init() and accesses per-cpu variables indeed.
Since the original patch want to avoid the lockdep warning caused by
page allocation in tlb_init(), we can move rcutree_report_cpu_starting()
to tlb_init() where after tlb exception configuration but before page
allocation.
Fixes: a2ccf46333d7b2cf96 ("LoongArch/smp: Call rcutree_report_cpu_starting() earlier")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ab502bc1cf3147ea1d8540d04b83a7a4cb6d1f1 upstream.
Some devices power the DSI PHY/PLL through a power rail that we model
as a GENPD. Enable runtime PM to make it suspendable.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543352/
Link: https://lore.kernel.org/r/20230620-topic-dsiphy_rpm-v2-2-a11a751f34f0@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 107a11637f43e7cdcca96c09525481e38b004455.
duplicated a change made in 6.6.8
a8f922ad2f76a53383982132ee44d123b72533c5
Cc: stable@vger.kernel.org # 6.6
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6564fce256a3944aa1bc76cb3c40e792d97c1eb upstream.
Alexander Potapenko writes in [1]: "For every memory access in the code
instrumented by KMSAN we call kmsan_get_metadata() to obtain the metadata
for the memory being accessed. For virtual memory the metadata pointers
are stored in the corresponding `struct page`, therefore we need to call
virt_to_page() to get them.
According to the comment in arch/x86/include/asm/page.h,
virt_to_page(kaddr) returns a valid pointer iff virt_addr_valid(kaddr) is
true, so KMSAN needs to call virt_addr_valid() as well.
To avoid recursion, kmsan_get_metadata() must not call instrumented code,
therefore ./arch/x86/include/asm/kmsan.h forks parts of
arch/x86/mm/physaddr.c to check whether a virtual address is valid or not.
But the introduction of rcu_read_lock() to pfn_valid() added instrumented
RCU API calls to virt_to_page_or_null(), which is called by
kmsan_get_metadata(), so there is an infinite recursion now. I do not
think it is correct to stop that recursion by doing
kmsan_enter_runtime()/kmsan_exit_runtime() in kmsan_get_metadata(): that
would prevent instrumented functions called from within the runtime from
tracking the shadow values, which might introduce false positives."
Fix the issue by switching pfn_valid() to the _sched() variant of
rcu_read_lock/unlock(), which does not require calling into RCU. Given
the critical section in pfn_valid() is very small, this is a reasonable
trade-off (with preemptible RCU).
KMSAN further needs to be careful to suppress calls into the scheduler,
which would be another source of recursion. This can be done by wrapping
the call to pfn_valid() into preempt_disable/enable_no_resched(). The
downside is that this sacrifices breaking scheduling guarantees; however,
a kernel compiled with KMSAN has already given up any performance
guarantees due to being heavily instrumented.
Note, KMSAN code already disables tracing via Makefile, and since mmzone.h
is included, it is not necessary to use the notrace variant, which is
generally preferred in all other cases.
Link: https://lkml.kernel.org/r/20240115184430.2710652-1-glider@google.com [1]
Link: https://lkml.kernel.org/r/20240118110022.2538350-1-elver@google.com
Fixes: 5ec8e8ea8b77 ("mm/sparsemem: fix race in accessing memory_section->usage")
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Alexander Potapenko <glider@google.com>
Reported-by: syzbot+93a9e8a3dea8d6085e12@syzkaller.appspotmail.com
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b1a09e44dc64f4f5930659b6d14a27183c00705 upstream.
The init_irq_stacks() has been changed to use the correct node:
https://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git/commit/?id=75b5e0bf90bf
The init_irq_scs() has the same issue with init_irq_stacks():
cpu_to_node() is not initialized yet, it does not work.
This patch uses early_cpu_to_node() to set the init_irq_scs()
with the correct node.
Signed-off-by: Huang Shijie <shijie@os.amperecomputing.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20231213012046.12014-1-shijie@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8cc063ae1b3dbe416ce62a15d49af4c2314b45fe ]
The purpose of the test_LAG_cleanup() function is to check that some
hardware addresses are removed from underlying devices after they have been
unenslaved. The test function simply checks that those addresses are not
present at the end. However, if the addresses were never added to begin
with due to some error in device setup, the test function currently passes.
This is a false positive since in that situation the test did not actually
exercise the intended functionality.
Add a check that the expected addresses are indeed present after device
setup. This makes the test function more robust.
I noticed this problem when running the team/dev_addr_lists.sh test on a
system without support for dummy and ipv6:
tools/testing/selftests/drivers/net/team# ./dev_addr_lists.sh
Error: Unknown device type.
Error: Unknown device type.
This program is not intended to be run as root.
RTNETLINK answers: Operation not supported
TEST: team cleanup mode lacp [ OK ]
Fixes: bbb774d921e2 ("net: Add tests for bonding and team address list management")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-3-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b6fb3050d8f5e2b6858eef344e47ac1f5442827 ]
Similar to commit dd2d40acdbb2 ("selftests: bonding: Add more missing
config options"), add more networking-specific config options which are
needed for team device tests.
For testing, I used the minimal config generated by virtme-ng and I added
the options in the config file. Afterwards, the team device test passed.
Fixes: bbb774d921e2 ("net: Add tests for bonding and team address list management")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-2-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae3f4b44641dfff969604735a0dcbf931f383285 ]
The documentation is pointing to the wrong path for the interface.
Documentation is pointing to /sys/class/<iface>, instead of
/sys/class/net/<iface>.
Fix it by adding the `net/` directory before the interface.
Fixes: 1a02ef76acfa ("net: sysfs: add documentation entries for /sys/class/<iface>/queues")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240131102150.728960-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04f647c8e456fcfabe9c252a4dcaee03b586fa4f ]
XDP queues are created/destroyed when a XDP program
is attached/detached. In current driver xdp_queues are not
getting destroyed on program exit due to incorrect xdp_queue
and tot_tx_queue count values.
This patch fixes the issue by setting tot_tx_queue and xdp_queue
count to correct values. It also fixes xdp.data_hard_start address.
Fixes: 06059a1a9a4a ("octeontx2-pf: Add XDP support to netdev PF")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Link: https://lore.kernel.org/r/20240130120610.16673-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc0970d5ac1d1317e212bdf55533935ecb6ae95c ]
When running the pmtu.sh via the kselftest infra, accessing
/dev/stdout gives unexpected results:
# dd: failed to open '/dev/stdout': Device or resource busy
# TEST: IPv4, bridged vxlan4: PMTU exceptions [FAIL]
Let dd use directly the standard output to fix the above:
# TEST: IPv4, bridged vxlan4: PMTU exceptions - nexthop objects [ OK ]
Fixes: 136a1b434bbb ("selftests: net: test vxlan pmtu exceptions with tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/23d7592c5d77d75cff9b34f15c227f92e911c2ae.1706635101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4e4b6d568d2549583cbda3f8ce567e586cb05da ]
The pmtu.sh test tries to detect the tunnel protocols available
in the running kernel and properly skip the unsupported cases.
In a few more complex setup, such detection is unsuccessful, as
the script currently ignores some intermediate error code at
setup time.
Before:
# which: no nettest in (/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin)
# TEST: vti6: PMTU exceptions (ESP-in-UDP) [FAIL]
# PMTU exception wasn't created after creating tunnel exceeding link layer MTU
# ./pmtu.sh: line 931: kill: (7543) - No such process
# ./pmtu.sh: line 931: kill: (7544) - No such process
After:
# xfrm4 not supported
# TEST: vti4: PMTU exceptions [SKIP]
Fixes: ece1278a9b81 ("selftests: net: add ESP-in-UDP PMTU test")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/cab10e75fda618e6fff8c595b632f47db58b9309.1706635101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7c25d8e17dd759d97ca093faf92eeb7da7b3890 ]
The mentioned test uses a few Kconfig still missing the
net config, add them.
Before:
# Error: Specified qdisc kind is unknown.
# Error: Specified qdisc kind is unknown.
# Error: Qdisc not classful.
# We have an error talking to the kernel
# Error: Qdisc not classful.
# We have an error talking to the kernel
# policy_routing not supported
# TEST: ICMPv4 with DSCP and ECN: PMTU exceptions [SKIP]
After:
# TEST: ICMPv4 with DSCP and ECN: PMTU exceptions [ OK ]
Fixes: ec730c3e1f0e ("selftest: net: Test IPv4 PMTU exceptions with DSCP and ECN")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/8d27bf6762a5c7b3acc457d6e6872c533040f9c1.1706635101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59c93583491ab15db109f9902524d241c4fa4c0b ]
Modern OSes use iptables implementation with nf_tables as a backend,
e.g.:
$ iptables -V
iptables v1.8.8 (nf_tables)
Pablo points out that we need CONFIG_NFT_COMPAT to make that work,
otherwise we see a lot of:
Warning: Extension DNAT revision 0 not supported, missing kernel module?
with DNAT being just an example here, other modules we need
include udp, TTL, length etc.
Link: https://lore.kernel.org/r/20240126201308.2903602-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: f7c25d8e17dd ("selftests: net: add missing config for pmtu.sh tests")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc90fbe0c3182157d2be100a2f6c2edbb1820677 ]
Currently the teardown/setup flow for driver probe/remove is quite
a bit different from the reset flows in pdsc_fw_down()/pdsc_fw_up().
One key piece that's missing are the calls to pci_alloc_irq_vectors()
and pci_free_irq_vectors(). The pcie reset case is calling
pci_free_irq_vectors() on reset_prepare, but not calling the
corresponding pci_alloc_irq_vectors() on reset_done. This is causing
unexpected/unwanted interrupt behavior due to the adminq interrupt
being accidentally put into legacy interrupt mode. Also, the
pci_alloc_irq_vectors()/pci_free_irq_vectors() functions are being
called directly in probe/remove respectively.
Fix this inconsistency by making the following changes:
1. Always call pdsc_dev_init() in pdsc_setup(), which calls
pci_alloc_irq_vectors() and get rid of the now unused
pds_dev_reinit().
2. Always free/clear the pdsc->intr_info in pdsc_teardown()
since this structure will get re-alloced in pdsc_setup().
3. Move the calls of pci_free_irq_vectors() to pdsc_teardown()
since pci_alloc_irq_vectors() will always be called in
pdsc_setup()->pdsc_dev_init() for both the probe/remove and
reset flows.
4. Make sure to only create the debugfs "identity" entry when it
doesn't already exist, which it will in the reset case because
it's already been created in the initial call to pdsc_dev_init().
Fixes: ffa55858330f ("pds_core: implement pci reset handlers")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240129234035.69802-7-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e96094c1d11cce4deb5da3c0500d49041ab845b8 ]
During reset the BARs might be accessed when they are
unmapped. This can cause unexpected issues, so fix it by
clearing the cached BAR values so they are not accessed
until they are re-mapped.
Also, make sure any places that can access the BARs
when they are NULL are prevented.
Fixes: 49ce92fbee0b ("pds_core: add FW update feature to devlink")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240129234035.69802-6-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e82a8745b951b1e794cc780d46f3fbee5e93447 ]
There are multiple paths that can result in using the pdsc's
adminq.
[1] pdsc_adminq_isr and the resulting work from queue_work(),
i.e. pdsc_work_thread()->pdsc_process_adminq()
[2] pdsc_adminq_post()
When the device goes through reset via PCIe reset and/or
a fw_down/fw_up cycle due to bad PCIe state or bad device
state the adminq is destroyed and recreated.
A NULL pointer dereference can happen if [1] or [2] happens
after the adminq is already destroyed.
In order to fix this, add some further state checks and
implement reference counting for adminq uses. Reference
counting was used because multiple threads can attempt to
access the adminq at the same time via [1] or [2]. Additionally,
multiple clients (i.e. pds-vfio-pci) can be using [2]
at the same time.
The adminq_refcnt is initialized to 1 when the adminq has been
allocated and is ready to use. Users/clients of the adminq
(i.e. [1] and [2]) will increment the refcnt when they are using
the adminq. When the driver goes into a fw_down cycle it will
set the PDSC_S_FW_DEAD bit and then wait for the adminq_refcnt
to hit 1. Setting the PDSC_S_FW_DEAD before waiting will prevent
any further adminq_refcnt increments. Waiting for the
adminq_refcnt to hit 1 allows for any current users of the adminq
to finish before the driver frees the adminq. Once the
adminq_refcnt hits 1 the driver clears the refcnt to signify that
the adminq is deleted and cannot be used. On the fw_up cycle the
driver will once again initialize the adminq_refcnt to 1 allowing
the adminq to be used again.
Fixes: 01ba61b55b20 ("pds_core: Add adminq processing and commands")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240129234035.69802-5-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffa55858330f267beec995fc4f68098c91311c64 ]
Implement the callbacks for a nice PCI reset. These get called
when a user is nice enough to use the sysfs PCI reset entry, e.g.
echo 1 > /sys/bus/pci/devices/0000:2b:00.0/reset
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 7e82a8745b95 ("pds_core: Prevent race issues involving the adminq")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 951705151e50f9022bc96ec8b3fd5697380b1df6 ]
The initial design for the adminq interrupt was done based
on client drivers having their own adminq and adminq
interrupt. So, each client driver's adminq isr would use
their specific adminqcq for the private data struct. For the
time being the design has changed to only use a single
adminq for all clients. So, instead use the struct pdsc for
the private data to simplify things a bit.
This also has the benefit of not dereferencing the adminqcq
to access the pdsc struct when the PDSC_S_STOPPING_DRIVER bit
is set and the adminqcq has actually been cleared/freed.
Fixes: 01ba61b55b20 ("pds_core: Add adminq processing and commands")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240129234035.69802-4-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d321067e2cfa4d5e45401a00912ca9da8d1af631 ]
There is a small window where pdsc_work_thread()
calls pdsc_process_adminq() and pdsc_process_adminq()
passes the PDSC_S_STOPPING_DRIVER check and starts
to process adminq/notifyq work and then the driver
starts a fw_down cycle. This could cause some
undefined behavior if the notifyqcq/adminqcq are
free'd while pdsc_process_adminq() is running. Use
cancel_work_sync() on the adminqcq's work struct
to make sure any pending work items are cancelled
and any in progress work items are completed.
Also, make sure to not call cancel_work_sync() if
the work item has not be initialized. Without this,
traces will happen in cases where a reset fails and
teardown is called again or if reset fails and the
driver is removed.
Fixes: 01ba61b55b20 ("pds_core: Add adminq processing and commands")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240129234035.69802-3-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5dee6d6923458e26966717f2a3eae7d09fc10bf6 ]
When inetdev_valid_mtu fails, cork->opt should be freed if it is
allocated in ip_setup_cork. Otherwise there could be a memleak.
Fixes: 501a90c94510 ("inet: protect against too small mtu values.")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240129091017.2938835-1-alexious@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8059918a1377f2f1fff06af4f5a4ed3d5acd6bc4 ]
- Disallow families other than NFPROTO_{IPV4,IPV6,INET}.
- Disallow layer 4 protocol with no ports, since destination port is a
mandatory attribute for this object.
Fixes: 857b46027d6f ("netfilter: nft_ct: add ct expectations support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 259eb32971e9eb24d1777a28d82730659f50fdcb ]
Module reference is bumped for each user, this should not ever happen.
But BUG_ON check should use rcu_access_pointer() instead.
If this ever happens, do WARN_ON_ONCE() instead of BUG_ON() and
consolidate pointer check under the rcu read side lock section.
Fixes: fab4085f4e24 ("netfilter: log: nf_log_packet() as real unified interface")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 776d451648443f9884be4a1b4e38e8faf1c621f9 ]
Bail out on using the tunnel dst template from other than netdev family.
Add the infrastructure to check for the family in objects.
Fixes: af308b94a2a4 ("netfilter: nf_tables: add tunnel support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb366fc7541a1de521ab3df58471746aa793b833 ]
commit c7aab4f17021 ("netfilter: nf_conntrack_tcp: re-init for syn packets
only") introduces a bug where SYNs in ORIGINAL direction on reused 5-tuple
result in incorrect window scale negotiation. This commit merged the SYN
re-initialization and simultaneous open or SYN retransmits cases. Merging
this block added the logic in tcp_init_sender() that performed window scale
negotiation to the retransmitted syn case. Previously. this would only
result in updating the sender's scale and flags. After the merge the
additional logic results in improperly clearing the scale in ORIGINAL
direction before any packets in the REPLY direction are received. This
results in packets incorrectly being marked invalid for being
out-of-window.
This can be reproduced with the following trace:
Packet Sequence:
> Flags [S], seq 1687765604, win 62727, options [.. wscale 7], length 0
> Flags [S], seq 1944817196, win 62727, options [.. wscale 7], length 0
In order to fix the issue, only evaluate window negotiation for packets
in the REPLY direction. This was tested with simultaneous open, fast
open, and the above reproduction.
Fixes: c7aab4f17021 ("netfilter: nf_conntrack_tcp: re-init for syn packets only")
Signed-off-by: Ryan Schaefer <ryanschf@amazon.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9ec85153fea6873c52ed4f5055c87263f1b54f9 ]
l2_tos_ttl_inherit.sh verifies the inheritance of tos and ttl
for GRETAP, VXLAN and GENEVE.
Before testing it checks if the required module is available
and if not skips the tests accordingly.
Currently only GRETAP and VXLAN are tested because the GENEVE
module is missing.
Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Signed-off-by: Matthias May <matthias.may@westermo.com>
Link: https://lore.kernel.org/r/20240130101157.196006-1-matthias.may@westermo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a89e24f8bfd3e3562d69709c9d9cd185ded869b ]
When port function state change is requested, and when the driver
does not support it, it refers to the hw address attribute instead
of state attribute. Seems like a copy paste error.
Fix it by referring to the port function state attribute.
Fixes: c0bea69d1ca7 ("devlink: Validate port function request")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129191059.129030-1-parav@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5c3eb4b7251baba5cd72c9e93920e710ac8194a ]
The original idea of the delay_time check was to not apply multicast
snooping too early when an MLD querier appears. And to instead wait at
least for MLD reports to arrive before switching from flooding to group
based, MLD snooped forwarding, to avoid temporary packet loss.
However in a batman-adv mesh network it was noticed that after 248 days of
uptime 32bit MIPS based devices would start to signal that they had
stopped applying multicast snooping due to missing queriers - even though
they were the elected querier and still sending MLD queries themselves.
While time_is_before_jiffies() generally is safe against jiffies
wrap-arounds, like the code comments in jiffies.h explain, it won't
be able to track a difference larger than ULONG_MAX/2. With a 32bit
large jiffies and one jiffies tick every 10ms (CONFIG_HZ=100) on these MIPS
devices running OpenWrt this would result in a difference larger than
ULONG_MAX/2 after 248 (= 2^32/100/60/60/24/2) days and
time_is_before_jiffies() would then start to return false instead of
true. Leading to multicast snooping not being applied to multicast
packets anymore.
Fix this issue by using a proper timer_list object which won't have this
ULONG_MAX/2 difference limitation.
Fixes: b00589af3b04 ("bridge: disable snooping if there is no querier")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240127175033.9640-1-linus.luessing@c0d3.blue
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b40f873a7c80dbafbb6f4a7a569f2dcaf969d283 ]
One of the test cases in the test_bridge_backup_port.sh selftest relies
on a matchall classifier to drop unrelated traffic so that the Tx drop
counter on the VXLAN device will only be incremented as a result of
traffic generated by the test.
However, the configuration option for the matchall classifier is
missing from the configuration file which might explain the failures we
see in the netdev CI [1].
Fix by adding CONFIG_NET_CLS_MATCHALL to the configuration file.
[1]
# Backup nexthop ID - invalid IDs
# -------------------------------
[...]
# TEST: Forwarding out of vx0 [ OK ]
# TEST: No forwarding using backup nexthop ID [ OK ]
# TEST: Tx drop increased [FAIL]
# TEST: IPv6 address family nexthop as backup nexthop [ OK ]
# TEST: No forwarding out of swp1 [ OK ]
# TEST: Forwarding out of vx0 [ OK ]
# TEST: No forwarding using backup nexthop ID [ OK ]
# TEST: Tx drop increased [FAIL]
[...]
Fixes: b408453053fb ("selftests: net: Add bridge backup port and backup nexthop ID test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240129123703.1857843-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60365049ccbacd101654a66ddcb299abfabd4fc5 ]
On a parisc64 kernel I sometimes notice this kernel warning:
Kernel unaligned access to 0x40ff8814 at ndisc_send_skb+0xc0/0x4d8
The address 0x40ff8814 points to the in6addr_linklocal_allrouters
variable and the warning simply means that some ipv6 function tries to
read a 64-bit word directly from the not-64-bit aligned
in6addr_linklocal_allrouters variable.
Unaligned accesses are non-critical as the architecture or exception
handlers usually will fix it up at runtime. Nevertheless it may trigger
a performance penality for some architectures. For details read the
"unaligned-memory-access" kernel documentation.
The patch below ensures that the ipv6 loopback and router addresses will
always be naturally aligned. This prevents the unaligned accesses for
all architectures.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 034dfc5df99eb ("ipv6: export in6addr_loopback to modules")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/ZbNuFM1bFqoH-UoY@p100
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c44fc98f0a8ffd94fa0bd291928e7e312ffc7ca4 ]
When working with GPIO, its direction must be set either when the GPIO is
requested by gpiod_get*() or later on by one of the gpiod_direction_*()
functions. Neither of this is done here which results in undefined
behavior on some systems.
As the reset GPIO is used right after it is requested here, it makes sense
to configure it as GPIOD_OUT_HIGH right away. With that, the following
gpiod_set_value_cansleep(1) becomes redundant and can be safely
removed.
Fixes: a653f2f538f9 ("net: dsa: qca8k: introduce reset via gpio feature")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/1706266175-3408-1-git-send-email-michal.vokac@ysoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbc404d20d1b46d89b461918bc44587620eda200 ]
All error handling paths, except this one, go to 'out' where
release_swfw_sync() is called.
This call balances the acquire_swfw_sync() call done at the beginning of
the function.
Branch to the error handling path in order to correctly release some
resources in case of error.
Fixes: ae14a1d8e104 ("ixgbe: Fix IOSF SB access issues")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c1b4af8c1b20c70dde01e58381685d6a4a1d2c8 ]
Currently ixgbe driver is notified of overheating events
via internal IXGBE_ERR_OVERTEMP error code.
Change the approach for handle_lasi() to use freshly introduced
is_overtemp function parameter which set when such event occurs.
Change check_overtemp() to bool and return true if overtemp
event occurs.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5795f533f30a80aa0473652876296ebc9129e33a ]
Change returning codes to the kernel ones instead of
the internal ones for the entire ixgbe driver.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: bbc404d20d1b ("ixgbe: Fix an error handling path in ixgbe_read_iosf_sb_reg_x550()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1f6a6b1830a8f1dc92ee26fae76333f446b0663 ]
The e1000e driver supports hardware with a variety of different clock
speeds, and thus a variety of different increment values used for
programming its PTP hardware clock.
The values currently programmed in e1000e_ptp_init are incorrect. In
particular, only two maximum adjustments are used: 24000000 - 1, and
600000000 - 1. These were originally intended to be used with the 96 MHz
clock and the 25 MHz clock.
Both of these values are actually slightly too high. For the 96 MHz clock,
the actual maximum value that can safely be programmed is 23,999,938. For
the 25 MHz clock, the maximum value is 599,999,904.
Worse, several devices use a 24 MHz clock or a 38.4 MHz clock. These parts
are incorrectly assigned one of either the 24million or 600million values.
For the 24 MHz clock, this is not a significant issue: its current
increment value can support an adjustment up to 7billion in the positive
direction. However, the 38.4 KHz clock uses an increment value which can
only support up to 230,769,157 before it starts overflowing.
To understand where these values come from, consider that frequency
adjustments have the form of:
new_incval = base_incval + (base_incval * adjustment) / (unit of adjustment)
The maximum adjustment is reported in terms of parts per billion:
new_incval = base_incval + (base_incval * adjustment) / 1 billion
The largest possible adjustment is thus given by the following:
max_incval = base_incval + (base_incval * max_adj) / 1 billion
Re-arranging to solve for max_adj:
max_adj = (max_incval - base_incval) * 1 billion / base_incval
We also need to ensure that negative adjustments cannot underflow. This can
be achieved simply by ensuring max_adj is always less than 1 billion.
Introduce new macros in e1000.h codifying the maximum adjustment in PPB for
each frequency given its associated increment values. Also clarify where
these values come from by commenting about the above equations.
Replace the switch statement in e1000e_ptp_init with one which mirrors the
increment value switch statement from e1000e_get_base_timinica. For each
device, assign the appropriate maximum adjustment based on its frequency.
Some parts can have one of two frequency modes as determined by
E1000_TSYNCRXCTL_SYSCFI.
Since the new flow directly matches the assignments in
e1000e_get_base_timinca, and uses well defined macro names, it is much
easier to verify that the resulting maximum adjustments are correct. It
also avoids difficult to parse construction such as the "hw->mac.type <
e1000_phc_lpt", and the use of fallthrough which was especially confusing
when combined with a conditional block.
Note that I believe the current increment value configuration used for
24MHz clocks is sub-par, as it leaves at least 3 extra bits available in
the INCVALUE register. However, fixing that requires more careful review of
the clock rate and associated values.
Reported-by: Trey Harrison <harrisondigitalmedia@gmail.com>
Fixes: 68fe1d5da548 ("e1000e: Add Support for 38.4MHZ frequency")
Fixes: d89777bf0e42 ("e1000e: add support for IEEE-1588 PTP")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 577e4432f3ac810049cb7e6b71f4d96ec7c6e894 ]
TCP rx zerocopy intent is to map pages initially allocated
from NIC drivers, not pages owned by a fs.
This patch adds to can_map_frag() these additional checks:
- Page must not be a compound one.
- page->mapping must be NULL.
This fixes the panic reported by ZhangPeng.
syzbot was able to loopback packets built with sendfile(),
mapping pages owned by an ext4 file to TCP rx zerocopy.
r3 = socket$inet_tcp(0x2, 0x1, 0x0)
mmap(&(0x7f0000ff9000/0x4000)=nil, 0x4000, 0x0, 0x12, r3, 0x0)
r4 = socket$inet_tcp(0x2, 0x1, 0x0)
bind$inet(r4, &(0x7f0000000000)={0x2, 0x4e24, @multicast1}, 0x10)
connect$inet(r4, &(0x7f00000006c0)={0x2, 0x4e24, @empty}, 0x10)
r5 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00',
0x181e42, 0x0)
fallocate(r5, 0x0, 0x0, 0x85b8)
sendfile(r4, r5, 0x0, 0x8ba0)
getsockopt$inet_tcp_TCP_ZEROCOPY_RECEIVE(r4, 0x6, 0x23,
&(0x7f00000001c0)={&(0x7f0000ffb000/0x3000)=nil, 0x3000, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0}, &(0x7f0000000440)=0x40)
r6 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00',
0x181e42, 0x0)
Fixes: 93ab6cc69162 ("tcp: implement mmap() for zero copy receive")
Link: https://lore.kernel.org/netdev/5106a58e-04da-372a-b836-9d3d0bd2507b@huawei.com/T/
Reported-and-bisected-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: linux-mm@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62b4248105353e7d1debd30ca5c57ec5e5f28e35 ]
In case the interface between the MAC and the PHY is SGMII, then the bit
GIGA_MODE on the MAC side needs to be set regardless of the speed at
which it is running.
Fixes: d28d6d2e37d1 ("net: lan966x: add port module support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
