IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
- Rewrite of HID-BPF internal implementation to use bpf struct_ops
instead of tracing (Benjamin Tissoires)
- Add new HID-BPF hooks to be able to intercept userspace calls
targetting a HID device and filtering them (Benjamin Tissoires)
- Add support for various new devices through HID-BPF filters (Benjamin
Tissoires)
Couple of fixes for HID-core:
- use of kvzalloc in case memory gets too fragmented (Hailong Liu)
- retrieve the device firmware node in the child HID device (Danny
Kaehn)
Smatch complains that 'str' can be used without being initialized:
drivers/platform/x86/intel/intel_plr_tpmi.c:178 plr_print_bits()
error: uninitialized symbol 'str'.
In this loop, we iterate over all the set bits and print the name of the
bit. The intention is that if there is a bit which is between 0-31 we
look for the name in the first array plr_coarse_reasons[] which has 10
elements. If the bit is in the 32-63 range we look for it in the
plr_fine_reasons[] array which has 30 elements. If the bit is in the
invalid ranges, 10-31 or 62-63, then we should print "UNKNOWN(%d)".
The problem is that 'str' needs to be initialized at the start of each
iteration, otherwise if we can't find the string then instead of printing
"UNKNOWN(%d)", we will re-print whatever the previous bit was.
Fixes: 9e9397a41b ("platform/x86/intel/tpmi/plr: Add support for the plr mailbox")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/b0084e70-4144-445a-9b89-fb19f6b8336a@stanley.mountain
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Pull x86 cpu model updates from Borislav Petkov:
- Flip the logic to add feature names to /proc/cpuinfo to having to
explicitly specify the flag if there's a valid reason to show it in
/proc/cpuinfo
- Switch a bunch of Intel x86 model checking code to the new CPU model
defines
- Fixes and cleanups
* tag 'x86_cpu_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/intel: Drop stray FAM6 check with new Intel CPU model defines
x86/cpufeatures: Flip the /proc/cpuinfo appearance logic
x86/CPU/AMD: Always inline amd_clear_divider()
x86/mce/inject: Add missing MODULE_DESCRIPTION() line
perf/x86/rapl: Switch to new Intel CPU model defines
x86/boot: Switch to new Intel CPU model defines
x86/cpu: Switch to new Intel CPU model defines
perf/x86/intel: Switch to new Intel CPU model defines
x86/virt/tdx: Switch to new Intel CPU model defines
x86/PCI: Switch to new Intel CPU model defines
x86/cpu/intel: Switch to new Intel CPU model defines
x86/platform/intel-mid: Switch to new Intel CPU model defines
x86/pconfig: Remove unused MKTME pconfig code
x86/cpu: Remove useless work in detect_tme_early()
Pull x86 cpu mitigation updates from Borislav Petkov:
- Add a spectre_bhi=vmexit mitigation option aimed at cloud
environments
- Remove duplicated Spectre cmdline option documentation
- Add separate macro definitions for syscall handlers which do not
return in order to address objtool warnings
* tag 'x86_bugs_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Add 'spectre_bhi=vmexit' cmdline option
x86/bugs: Remove duplicate Spectre cmdline option descriptions
x86/syscall: Mark exit[_group] syscall handlers __noreturn
Pull x86 vmware updates from Borislav Petkov:
- Add a unified VMware hypercall API layer which should be used by all
callers instead of them doing homegrown solutions. This will provide
for adding API support for confidential computing solutions like TDX
* tag 'x86_vmware_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vmware: Add TDX hypercall support
x86/vmware: Remove legacy VMWARE_HYPERCALL* macros
x86/vmware: Correct macro names
x86/vmware: Use VMware hypercall API
drm/vmwgfx: Use VMware hypercall API
input/vmmouse: Use VMware hypercall API
ptp/vmware: Use VMware hypercall API
x86/vmware: Introduce VMware hypercall API
Pull misc x86 updates from Borislav Petkov:
- Make error checking of AMD SMN accesses more robust in the callers as
they're the only ones who can interpret the results properly
- The usual cleanups and fixes, left and right
* tag 'x86_misc_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kmsan: Fix hook for unaligned accesses
x86/platform/iosf_mbi: Convert PCIBIOS_* return codes to errnos
x86/pci/xen: Fix PCIBIOS_* return code handling
x86/pci/intel_mid_pci: Fix PCIBIOS_* return code handling
x86/of: Return consistent error type from x86_of_pci_irq_enable()
hwmon: (k10temp) Rename _data variable
hwmon: (k10temp) Remove unused HAVE_TDIE() macro
hwmon: (k10temp) Reduce k10temp_get_ccd_support() parameters
hwmon: (k10temp) Define a helper function to read CCD temperature
x86/amd_nb: Enhance SMN access error checking
hwmon: (k10temp) Check return value of amd_smn_read()
EDAC/amd64: Check return value of amd_smn_read()
EDAC/amd64: Remove unused register accesses
tools/x86/kcpuid: Add missing dir via Makefile
x86, arm: Add missing license tag to syscall tables files
Pull x86 build update from Borislav Petkov:
- Make sure insn support detection uses the proper compiler flag in
bi-arch builds
* tag 'x86_build_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kconfig: Add as-instr64 macro to properly evaluate AS_WRUSS
Pull x86 uaccess update from Borislav Petkov:
- Cleanup the 8-byte getuser() asm case
* tag 'x86_core_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/uaccess: Improve the 8-byte getuser() case
Pull x86 confidential computing updates from Borislav Petkov:
"Unrelated x86/cc changes queued here to avoid ugly cross-merges and
conflicts:
- Carve out CPU hotplug function declarations into a separate header
with the goal to be able to use the lockdep assertions in a more
flexible manner
- As a result, refactor cacheinfo code after carving out a function
to return the cache ID associated with a given cache level
- Cleanups
Add support to be able to kexec TDX guests:
- Expand ACPI MADT CPU offlining support
- Add machinery to prepare CoCo guests memory before kexec-ing into a
new kernel
- Cleanup, readjust and massage related code"
* tag 'x86_cc_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
ACPI: tables: Print MULTIPROC_WAKEUP when MADT is parsed
x86/acpi: Add support for CPU offlining for ACPI MADT wakeup method
x86/mm: Introduce kernel_ident_mapping_free()
x86/smp: Add smp_ops.stop_this_cpu() callback
x86/acpi: Do not attempt to bring up secondary CPUs in the kexec case
x86/acpi: Rename fields in the acpi_madt_multiproc_wakeup structure
x86/mm: Do not zap page table entries mapping unaccepted memory table during kdump
x86/mm: Make e820__end_ram_pfn() cover E820_TYPE_ACPI ranges
x86/tdx: Convert shared memory back to private on kexec
x86/mm: Add callbacks to prepare encrypted memory for kexec
x86/tdx: Account shared memory
x86/mm: Return correct level from lookup_address() if pte is none
x86/mm: Make x86_platform.guest.enc_status_change_*() return an error
x86/kexec: Keep CR4.MCE set during kexec for TDX guest
x86/relocate_kernel: Use named labels for less confusion
cpu/hotplug, x86/acpi: Disable CPU offlining for ACPI MADT wakeup
cpu/hotplug: Add support for declaring CPU offlining not supported
x86/apic: Mark acpi_mp_wake_* variables as __ro_after_init
x86/acpi: Extract ACPI MADT wakeup code into a separate file
x86/kexec: Remove spurious unconditional JMP from from identity_mapped()
...
Pull x86 cleanups from Borislav Petkov:
- Remove an unused function and the documentation of an already removed
cmdline parameter
* tag 'x86_cleanups_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Remove unused function __fortify_panic()
Documentation: Remove "mfgpt_irq=" from the kernel-parameters.txt file
Pull x86 boot updates from Borislav Petkov:
- Add a check to warn when cmdline parsing happens before the final
cmdline string has been built and thus arguments can get lost
- Code cleanups and simplifications
* tag 'x86_boot_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/setup: Warn when option parsing is done too early
x86/boot: Clean up the arch/x86/boot/main.c code a bit
x86/boot: Use current_stack_pointer to avoid asm() in init_heap()
Pull x86 alternatives updates from Borislav Petkov:
"This is basically PeterZ's idea to nest the alternative macros to
avoid the need to "spell out" the number of alternates in an
ALTERNATIVE_n() macro and thus have an ever-increasing complexity in
those definitions.
For ease of bisection, the old macros are converted to the new, nested
variants in a step-by-step manner so that in case an issue is
encountered during testing, one can pinpoint the place where it fails
easier.
Because debugging alternatives is a serious pain"
* tag 'x86_alternatives_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives, kvm: Fix a couple of CALLs without a frame pointer
x86/alternative: Replace the old macros
x86/alternative: Convert the asm ALTERNATIVE_3() macro
x86/alternative: Convert the asm ALTERNATIVE_2() macro
x86/alternative: Convert the asm ALTERNATIVE() macro
x86/alternative: Convert ALTERNATIVE_3()
x86/alternative: Convert ALTERNATIVE_TERNARY()
x86/alternative: Convert alternative_call_2()
x86/alternative: Convert alternative_call()
x86/alternative: Convert alternative_io()
x86/alternative: Convert alternative_input()
x86/alternative: Convert alternative_2()
x86/alternative: Convert alternative()
x86/alternatives: Add nested alternatives macros
x86/alternative: Zap alternative_ternary()
Pull RAS updates from Borislav Petkov:
- A cleanup and a correction to the error injection driver to inject a
MCA_MISC value only when one has actually been supplied by the user
* tag 'ras_core_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Remove unused variable and return value in machine_check_poll()
x86/mce/inject: Only write MCA_MISC when a value has been supplied
Pull EDAC updates from Borislav Petkov:
- The AMD memory controllers data fabric version 4.5 supports
non-power-of-2 denormalization in the sense that certain bits of the
system physical address cannot be reconstructed from the normalized
address reported by the RAS hardware. Add support for handling such
addresses
- Switch the EDAC drivers to the new Intel CPU model defines
- The usual fixes and cleanups all over the place
* tag 'edac_updates_for_v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC: Add missing MODULE_DESCRIPTION() macros
EDAC/dmc520: Use devm_platform_ioremap_resource()
EDAC/igen6: Add Intel Arrow Lake-U/H SoCs support
RAS/AMD/FMPM: Use atl internal.h for INVALID_SPA
RAS/AMD/ATL: Implement DF 4.5 NP2 denormalization
RAS/AMD/ATL: Validate address map when information is gathered
RAS/AMD/ATL: Expand helpers for adding and removing base and hole
RAS/AMD/ATL: Read DRAM hole base early
RAS/AMD/ATL: Add amd_atl pr_fmt() prefix
RAS/AMD/ATL: Add a missing module description
EDAC, i10nm: make skx_common.o a separate module
EDAC/skx: Switch to new Intel CPU model defines
EDAC/sb_edac: Switch to new Intel CPU model defines
EDAC, pnd2: Switch to new Intel CPU model defines
EDAC/i10nm: Switch to new Intel CPU model defines
EDAC/ghes: Add missing newline to pr_info() statement
RAS/AMD/ATL: Add missing newline to pr_info() statement
EDAC/thunderx: Remove unused struct error_syndrome
Pull spi updates from Mark Brown:
"There's some quite exciting core work in this release, we've got the
beginnings of support for hardware initiated transfers which is itself
independently useful for optimising fast paths in existing drivers.
We also have a rework of the DMA mapping which allows finer grained
decisions about DMA mapping messages and also helps remove some bodges
that we'd had.
Otherwise it's a fairly quiet release, a few new drivers and features
for existing drivers, together with various cleanups and DT binding
conversions.
One regmap SPI fix made it's way in here too which I should probably
have sent as a regmap fix instead.
Summary:
- Support for pre-optimising messages, reducing the overhead for
messages that are repeatedly used (eg, reading the interrupt status
from a device). This will also be used for hardware initiated
transfers in future.
- A reworking of how DMA mapping is done, introducing a new helper
and allowing the DMA mapping decision to be done per transfer
instead of per message.
- Support for Atmel SAMA7D64, Freescale LX2160A DSPI and WCH CH341A"
* tag 'spi-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (72 commits)
spi: dt-bindings: at91: Add sama7d65 compatible string
spi: add ch341a usb2spi driver
spi: dt-bindings: fsl-dspi: add compatible string 'fsl,lx2160a-dspi'
spi: dt-bindings: fsl-dspi: add dmas and dma-names properties
spi: spi: Remove unnecessary ‘0’ values from status
spi: spi: Remove unnecessary ‘0’ values from rc
spi: xcomm: fix coding style
spi: xcomm: remove i2c_set_clientdata()
spi: xcomm: make use of devm_spi_alloc_host()
spi: xcomm: add gpiochip support
spi: dt-bindings: snps,dw-apb-ssi.yaml: update compatible property
spi: dt-bindings: fsl-dspi: Convert to yaml format
spi: fsl-dspi: use common proptery 'spi-cs-setup(hold)-delay-ns'
spi: axi-spi-engine: remove platform_set_drvdata()
spi: spi-fsl-lpspi: Pass pm_ptr()
spi: spi-imx: Pass pm_ptr()
spi: spi-fsl-lpspi: Switch to SYSTEM_SLEEP_PM_OPS()
spi: spi-imx: Switch to RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
spi: add EXPORT_SYMBOL_GPL(devm_spi_optimize_message)
spi: add devm_spi_optimize_message() helper
...
Pull regulator updates from Mark Brown:
"This s a very quiet release for the regulator API, we have a few new
devices (most of which are just ID updates) and one new fairly
specialist core feature for use in interrupt context.
- An API allowing lockless enable/disable for regulators acquired in
exclusive mode, for use in interrupt contexts
- A rewrite of the MedaTek DVFSRC regulator driver which apparently
never worked
- Support for Mediaktek MT6312, Qualcomm QCA6390 and WCN7850, Renesas
RZ/G2L USB VBUS regulator and ST Microelectronics STM32MP13"
* tag 'regulator-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (26 commits)
regulator: dt-bindings: pca9450: Make interrupt optional
regulator: pca9450: Make IRQ optional
dt-bindings: regulator: sprd,sc2731-regulator: convert to YAML
regulator: max77857: Constify struct regmap_config
regulator: da9121: Constify struct regmap_config
dt-bindings: regulator: ti,tps65132: document VIN supply
dt-bindings: mfd: twl: Fix example
regulator: Add Renesas RZ/G2L USB VBUS regulator driver
regulator: core: Add helper for allow HW access to enable/disable regulator
regulator: Add bindings for MediaTek DVFSRC Regulators
regulator: Add refactored mtk-dvfsrc-regulator driver
regulator: Remove mtk-dvfsrc-regulator.c
regulator: userspace-consumer: quiet device deferral
regulator: dt-bindings: mt6315: Document MT6319 PMIC
regulator: add missing MODULE_DESCRIPTION() macro
dt-bindings: regulator: twl-regulator: convert to yaml
regulator: dt-bindings: describe the PMU module of the WCN7850 package
regulator: dt-bindings: describe the PMU module of the QCA6390 package
regulator: dt-bindings: rtq2208: Add specified fixed LDO VOUT property
regulator: rtq2208: Add fixed LDO VOUT property and check that matches the constraints
...
Pull regmap updates from Mark Brown:
"There's one new feature here, a regmap_multi_reg_read() matching the
existing write function which has some IIO users coming.
This allows atomic reads from multiple registers without the need to
wrap a higher level lock in the client driver just for regmap (which
already has locks anyway).
We also have one fix for the KUnit tests, and a bunch of cleanups"
* tag 'regmap-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: kunit: Add test cases for regmap_multi_reg_(read,write}()
regmap: Implement regmap_multi_reg_read()
regmap-irq: handle const struct regmap_irq_sub_irq_map
const_structs.checkpatch: add regmap structs
regmap: add missing MODULE_DESCRIPTION() macros
regmap-i2c: add missing MODULE_DESCRIPTION() macro
regmap: kunit: Use array_size() and sizeof(*ptr) consistently
regmap: maple: Switch to use kmemdup_array()
regmap: cache: Switch to use kmemdup_array()
regmap: cache: Use correct type of the rb_for_each() parameter
regmap: Switch to use kmemdup_array()
regmap: kunit: add missing MODULE_DESCRIPTION()
regmap: kunit: Fix memory leaks in gen_regmap() and gen_raw_regmap()
Pull gpio updates from Bartosz Golaszewski:
"The majority of added lines are two new modules: the GPIO virtual
consumer module that improves our ability to add automated tests for
the kernel API and the "sloppy" logic analyzer module that uses the
GPIO API to implement a coarse-grained debugging tool for useful for
remote development.
Other than that we have the usual assortment of various driver
extensions, improvements to the core GPIO code, DT-bindings and other
documentation updates as well as an extension to the interrupt
simulator:
GPIOLIB core:
- rework kfifo handling rework in the character device code
- improve the labeling of GPIOs requested as interrupts and show more
info on interrupt-only GPIOs in debugfs
- remove unused APIs
- unexport interfaces that are only used from the core GPIO code
- drop the return value from gpiochip_set_desc_names() as it cannot
fail
- move a string array definition out of a header and into a specific
compilation unit
- convert the last user of gpiochip_get_desc() other than GPIO core
to using a safer alternative
- use array_index_nospec() where applicable
New drivers:
- add a "virtual GPIO consumer" module that allows requesting GPIOs
from actual hardware and driving tests of the in-kernel GPIO API
from user-space over debugfs
- add a GPIO-based "sloppy" logic analyzer module useful for "first
glance" debugging on remote boards
Driver improvements:
- add support for a new model to gpio-pca953x
- lock GPIOs as interrupts in gpio-sim when the lines are requested
as irqs via the simulator domain + some other minor improvements
- improve error reporting in gpio-syscon
- convert gpio-ath79 to using dynamic GPIO base and range
- use pcibios_err_to_errno() for converting PCIBIOS error codes to
errno vaues in gpio-amd8111 and gpio-rdc321x
- allow building gpio-brcmstb for the BCM2835 architecture
DT bindings:
- convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
- document new properties for aspeed,gpio, fsl,qoriq-gpio and
gpio-vf610
- document new compatibles for pca953x and fsl,qoriq-gpio
Documentation:
- document stricter behavior of the GPIO character device uAPI with
regards to reconfiguring requested line without direction set
- clarify the effect of the active-low flag on line values and edges
- remove documentation for the legacy GPIO API in order to stop
tempting people to use it
- document the preference for using pread() for reading edge events
in the sysfs API
Other:
- add an extended initializer to the interrupt simulator allowing to
specify a number of callbacks callers can use to be notified about
irqs being requested and released"
* tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (41 commits)
gpio: mc33880: Convert comma to semicolon
gpio: virtuser: actually use the "trimmed" local variable
dt-bindings: gpio: convert Atmel GPIO to json-schema
gpio: virtuser: new virtual testing driver for the GPIO API
dt-bindings: gpio: vf610: Allow gpio-line-names to be set
gpio: sim: lock GPIOs as interrupts when they are requested
genirq/irq_sim: add an extended irq_sim initializer
dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,ls1046a-gpio
gpiolib: unexport gpiochip_get_desc()
gpio: add sloppy logic analyzer using polling
Documentation: gpio: Reconfiguration with unset direction (uAPI v2)
Documentation: gpio: Reconfiguration with unset direction (uAPI v1)
dt-bindings: gpio: fsl,qoriq-gpio: add common property gpio-line-names
gpio: ath79: convert to dynamic GPIO base allocation
pinctrl: da9062: replace gpiochip_get_desc() with gpio_device_get_desc()
gpiolib: put gpio_suffixes in a single compilation unit
Documentation: gpio: Clarify effect of active low flag on line edges
Documentation: gpio: Clarify effect of active low flag on line values
gpiolib: Remove data-less gpiochip_add() function
gpio: sim: use devm_mutex_init()
...
Pull MMC updates from Ulf Hansson:
"MMC host:
- Convert from using tasklet to the BH workqueue
- dw_mmc-bluefield: Add support for eMMC HW reset
- mmc_spi: Allow spi controllers incapable of lower than 400kHz
- sdhci: Rework code to eliminate SDHCI_QUIRK_UNSTABLE_RO_DETECT
- sdhci-brcmstb: Add support for the BCM2712 variant
- sdhci-esdhc-imx: Disable card-detect as system wakeup on S32G platforms
- sdhci-msm: Add support for the SDX75 variant
- sdhci-of-dwcmshc: Enable CQE support for some Rockchip variants
- sdhci-of-esdhc: Convert DT-bindings to yaml
- sdhci-sprd: Convert DT-bindings to yaml
MEMSTICK:
- rtsx_pci_ms: Remove the unused Realtek PCI memstick driver"
* tag 'mmc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (26 commits)
MAINTAINERS: add 's32@nxp.com' as relevant mailing list for 'sdhci-esdhc-imx' driver
mmc: sdhci-esdhc-imx: obtain the 'per' clock rate after its enablement
mmc: sdhci-esdhc-imx: disable card detect wake for S32G based platforms
dt-bindings: mmc: sdhci-sprd: convert to YAML
mmc: davinci_mmc: report all possible bus widths
mmc: dw_mmc-bluefield: Add support for eMMC HW reset
mmc: dw_mmc: Add support for platform specific eMMC HW reset
mmc: sdhci_am654: Constify struct regmap_config
mmc: Convert from tasklet to BH workqueue
mmc: sdhi: Convert from tasklet to BH workqueue
mmc: mmc_spi: allow for spi controllers incapable of getting as low as 400k
memstick: rtsx_pci_ms: Remove Realtek PCI memstick driver
MAINTAINERS: drop entry for VIA SD/MMC controller
mmc: tmio: Remove obsolete .set_pwr() callback()
mfd: tmio: Remove obsolete .set_clk_div() callback
mmc: sdhci-brcmstb: Add ARCH_BCM2835 option
mmc: sdhci: Eliminate SDHCI_QUIRK_UNSTABLE_RO_DETECT
dt-bindings: mmc: Convert fsl-esdhc.txt to yaml
dt-bindings: mmc: mmc-spi-slot: Change voltage-ranges to uint32-matrix
mmc: add missing MODULE_DESCRIPTION() macros
...
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add support for HW-managed devices
pmdomain providers:
- amlogic: Add support for the A5 and the A4 power domains
- arm: Enable system wakeups for the SCMI PM domain
- qcom/clk: Add HW-mode callbacks to allow switching of GDSC mode
pmdomain consumers:
- qcom/media/venus: Enable support for switching GDSC HW-mode on V6"
* tag 'pmdomain-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: amlogic: Constify struct meson_secure_pwrc_domain_desc
venus: pm_helpers: Use dev_pm_genpd_set_hwmode to switch GDSC mode on V6
clk: qcom: videocc: Use HW_CTRL_TRIGGER for SM8250, SC7280 vcodec GDSC's
clk: qcom: gdsc: Add set and get hwmode callbacks to switch GDSC mode
PM: domains: Add the domain HW-managed mode to the summary
PM: domains: Allow devices attached to genpd to be managed by HW
pmdomain: amlogic: Add support for A5 power domains controller
dt-bindings: power: add Amlogic A5 power domains
pmdomain: amlogic: add missing MODULE_DESCRIPTION() macros
pmdomain: arm: scmi_pm_domain: set flag GENPD_FLAG_ACTIVE_WAKEUP
pmdomain: renesas: rmobile-sysc: Use for_each_child_of_node_scoped()
pmdomain: core: Use genpd_is_irq_safe() helper
pmdomain: amlogic: Add support for A4 power domains controller
dt-bindings: power: add Amlogic A4 power domains
Pull pwm updates from Uwe Kleine-König:
"This contains the usual mix of fixes, cleanups, two new drivers and
several dt binding updates. The fixes are for minor issues that are
already old (4.11-rc1 and 3.9-rc1) and were found by code review and
not during usage, so I didn't sent them for earlier inclusion.
The changes to include/linux/mfd/stm32-timers.h and
drivers/counter/stm32-timer-cnt.c are part of an immutable branch that
will also be included in the mfd and counter pulls. It changes some
register definitions and affects the pwm-stm32 driver.
Thanks go to Andy Shevchenko, AngeloGioacchino Del Regno, Conor
Dooley, David Lechner, Dhruva Gole, Drew Fustini, Frank Li, Jeff
Johnson, Junyi Zhao, Kelvin Zhang, Krzysztof Kozlowski, Lee Jones,
Linus Walleij, Linus Walleij, Michael Hennerich, Nicola Di Lieto,
Nicolas Ferre, Nuno Sa, Paul Cercueil, Raag Jadav, Rob Herring, Sean
Anderson, Sean Young, Shenwei Wang, Stefan Wahren, Trevor Gamblin,
Tzung-Bi Shih, Vincent Whitchurch and William Breathitt Gray for their
contributions to this pull request; they authored changes, spend time
reviewing changes and coordinated the above mentioned immutable
branch"
* tag 'pwm/for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (38 commits)
pwm: axi-pwmgen: add .max_register to regmap
dt-bindings: pwm: at91: Add sama7d65 compatible string
pwm: atmel-tcb: Make private data variable naming consistent
pwm: atmel-tcb: Simplify checking the companion output
pwm: Allow pwm state transitions from an invalid state
pwm: xilinx: Simplify using devm_ functions
pwm: Use guards for pwm_lookup_lock instead of explicity mutex_lock + mutex_unlock
pwm: Use guards for export->lock instead of explicity mutex_lock + mutex_unlock
pwm: Use guards for pwm_lock instead of explicity mutex_lock + mutex_unlock
pwm: Register debugfs operations after the pwm class
pwm: imx-tpm: Enable pinctrl setting for sleep state
pwm: lpss: drop redundant runtime PM handles
pwm: lpss: use devm_pm_runtime_enable() helper
pwm-stm32: Make use of parametrised register definitions
dt-bindings: pwm: imx: remove interrupt property from required
pwm: meson: Add support for Amlogic S4 PWM
pwm: Add GPIO PWM driver
dt-bindings: pwm: Add pwm-gpio
pwm: Drop pwm_apply_state()
bus: ts-nbus: Use pwm_apply_might_sleep()
...
Pull hwmon updates from Guenter Roeck:
"Obsolete driver removals:
- Removed obsolete adm1021 and max6642 drivers
New drivers:
- MPS MP2891, MP2993, MP9941, and MP5920
- SPD5118 (Temperature Sensor and EEPROM)
Added device support to existing drivers:
- g762: G761
- dell-smm: Dell OptiPlex 7060
- asus-ec-sensors: ProArt X670E-CREATOR WIFI
- corsair-psu: HX1200i Series 2023 psu
- nzxt-smart2: Additional USB IS for NZXT RGB & Fan Controller
Notable enhancements and fixes:
- Removed use of i2c_match_id()
- Constified struct regmap_config where feasible
- Cleaned up amc6821 driver, and converted to use regmap and
with_info API
- Converted max6639 driver to use with_info API; added support for
additional sysfs attributes
- Fixed various sysfs attribute underflows
- Added PEC support to hwmon core, and use in lm90 and max31827
drivers
And various other minor fixes and improvements"
* tag 'hwmon-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (103 commits)
hwmon: (max6697) Fix swapped temp{1,8} critical alarms
hwmon: (max6697) Fix underflow when writing limit attributes
hwmon: Remove obsolete adm1021 and max6642 drivers
hwmon: (pmbus/ltc4286) Drop unused i2c device ids
hwmon: (g762) Initialize fans after configuring clock
hwmon: (amc6821) Add support for pwm1_mode attribute
hwmon: (amc6821) Convert to with_info API
hwmon: (amc6821) Convert to use regmap
hwmon: (amc6821) Drop unnecessary enum chips
hwmon: (amc6821) Use BIT() and GENMASK()
hwmon: (amc6821) Use tabs for column alignment in defines
hwmon: (amc6821) Reorder include files, drop unnecessary ones
hwmon: (amc6821) Add support for fan1_target and pwm1_enable mode 4
hwmon: (amc6821) Rename fan1_div to fan1_pulses
hwmon: (amc6821) Make reading and writing fan speed limits consistent
hwmon: (amc6821) Stop accepting invalid pwm values
hwmon: (w83627ehf) Fix underflows seen when writing limit attributes
hwmon: (nct6775-core) Fix underflows seen when writing limit attributes
hwmon: (lm95234) Fix underflows seen when writing limit attributes
hwmon: (adc128d818) Fix underflows seen when writing limit attributes
...
Pull power sequencing updates from Bartosz Golaszewski:
"This has been in development since last year's Linux Plumbers
Conference and was inspired by the need to enable support upstream for
Bluetooth/WLAN chips on Qualcomm platforms.
The main problem we're fixing is powering up devices which are
represented as separate objects in the kernel (binding to different
drivers) but which share parts of the power-up sequence and thus need
some kind of a mediator who knows the possible interactions and can
assure they don't interfere with neither device's bring up. An example
of such an inter-driver interaction is the WCN family of BT/WLAN chips
from Qualcomm of which some models require the user to observe a
certain delay between driving the bt-enable and wlan-enable GPIOs.
This is not a new problem but up to this point all attempts at
addressing it ended up hitting one wall or another and being dropped.
The main obstacle was the fact that most these attempts tried to
introduce the concept of a "power sequence" into the device-tree
bindings which breaks the main DT rule: describe the hardware, not its
behavior. The solution I proposed focuses on making the power
sequencer drivers interpret the actual HW description flexibly. More
details on that are in the linked cover letter.
The second problem fixed here is powering up PCI devices before they
are detected on the bus. This is achieved by creating special platform
devices for device-tree nodes describing hard-wired PCI devices which
bind to the so-called PCI power control drivers which enable required
resources and trigger a bus rescan once the controlled device is up
then setup the correct devlink hierarchy for power-management.
By combining the two new frameworks we implemented the power
sequencing PCI power control driver which is capable of powering up
the WLAN modules of the QCom WCN family of chipsets.
All this has spent a significant amount of time in linux-next and
enabled WLAN/BT support on several Qualcomm platforms. To further
prove that this is useful and needed: right after this was picked up
into next, I was sent a series using the subsystem for a similar
use-case on Amlogic platforms.
This contains the core power sequencing framework, the first driver,
PCI changes using the pwrseq library (blessed by Bjorn Helgaas) and
some fixes that came later"
* tag 'pwrseq-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
PCI/pwrctl: only call of_platform_populate() if CONFIG_OF is enabled
power: sequencing: simplify returning pointer without cleanup
PCI/pwrctl: Add a PCI power control driver for power sequenced devices
PCI/pwrctl: Add PCI power control core code
PCI/pwrctl: Create platform devices for child OF nodes of the port node
PCI/pwrctl: Reuse the OF node for power controlled devices
PCI: Hold the rescan mutex when scanning for the first time
power: pwrseq: add a driver for the PMU module on the QCom WCN chipsets
power: sequencing: implement the pwrseq core
Pull chrome platform updates from Tzung-Bi Shih:
"New code:
- Add "cros_ec_hwmon" driver to expose fan speed and temperature
- Add "cros_charge-control" driver to control charge thresholds and
behaviour
- Add module parameter "log_poll_period_ms" in cros_ec_debugfs for
tuning the poll period
- Support version 3 of EC_CMD_GET_NEXT_EVENT and keyboard matrix
Fixes:
- Fix a race condition in accessing MEC (Microchip EC) memory between
ACPI and kernel. Serialize the memory access by an AML (ACPI
Machine Language) mutex
- Fix an issue of wrong EC message version in cros_ec_debugfs
Misc:
- Fix kernel-doc errors and cleanups"
* tag 'tag-chrome-platform-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (28 commits)
power: supply: cros_charge-control: Fix signedness bug in charge_behaviour_store()
power: supply: cros_charge-control: Avoid accessing attributes out of bounds
power: supply: cros_charge-control: don't load if Framework control is present
power: supply: add ChromeOS EC based charge control driver
platform/chrome: cros_ec_proto: Introduce cros_ec_get_cmd_versions()
platform/chrome: Update binary interface for EC-based charge control
ACPI: battery: add devm_battery_hook_register()
dt-bindings: input: cros-ec-keyboard: Add keyboard matrix v3.0
platform/chrome: cros_ec_lpc: Handle zero length read/write
platform/chrome: cros_ec_lpc: Fix error code in cros_ec_lpc_mec_read_bytes()
platform/chrome: cros_ec_debugfs: fix wrong EC message version
platform/chrome: cros_ec_proto: update Kunit test for get_next_data_v3
platform/chrome: cros_ec_proto: add missing MODULE_DESCRIPTION() macro
hwmon: (cros_ec) Fix access to restricted __le16
hwmon: (cros_ec) Prevent read overflow in probe()
platform/chrome: cros_ec_lpc: Add quirks for Framework Laptop
platform/chrome: cros_ec_lpc: Add a new quirk for AML mutex
platform/chrome: cros_ec_lpc: Add a new quirk for ACPI id
platform/chrome: cros_ec_lpc: MEC access can use an AML mutex
platform/chrome: cros_ec_lpc: MEC access can return error code
...
Pull workqueue fix from Tejun Heo:
"cpus_read_lock() was dropped from workqueue creation path but there
were still remaining lockdep_assert_cpus_held() triggering spurious
lockdep failures. Remove them"
* tag 'wq-for-6.11-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Remove unneeded lockdep_assert_cpus_held()
Pull arm64 updates from Catalin Marinas:
"The biggest part is the virtual CPU hotplug that touches ACPI,
irqchip. We also have some GICv3 optimisation for pseudo-NMIs that has
been queued via the arm64 tree. Otherwise the usual perf updates,
kselftest, various small cleanups.
Core:
- Virtual CPU hotplug support for arm64 ACPI systems
- cpufeature infrastructure cleanups and making the FEAT_ECBHB ID
bits visible to guests
- CPU errata: expand the speculative SSBS workaround to more CPUs
- GICv3, use compile-time PMR values: optimise the way regular IRQs
are masked/unmasked when GICv3 pseudo-NMIs are used, removing the
need for a static key in fast paths by using a priority value
chosen dynamically at boot time
ACPI:
- 'acpi=nospcr' option to disable SPCR as default console for arm64
- Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/
Perf updates:
- Rework of the IMX PMU driver to enable support for I.MX95
- Enable support for tertiary match groups in the CMN PMU driver
- Initial refactoring of the CPU PMU code to prepare for the fixed
instruction counter introduced by Arm v9.4
- Add missing PMU driver MODULE_DESCRIPTION() strings
- Hook up DT compatibles for recent CPU PMUs
Kselftest updates:
- Kernel mode NEON fp-stress
- Cleanups, spelling mistakes
Miscellaneous:
- arm64 Documentation update with a minor clarification on TBI
- Fix missing IPI statistics
- Implement raw_smp_processor_id() using thread_info rather than a
per-CPU variable (better code generation)
- Make MTE checking of in-kernel asynchronous tag faults conditional
on KASAN being enabled
- Minor cleanups, typos"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (69 commits)
selftests: arm64: tags: remove the result script
selftests: arm64: tags_test: conform test to TAP output
perf: add missing MODULE_DESCRIPTION() macros
arm64: smp: Fix missing IPI statistics
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64
Documentation: arm64: Update memory.rst for TBI
arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1
KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1
perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h
perf: arm_v6/7_pmu: Drop non-DT probe support
perf/arm: Move 32-bit PMU drivers to drivers/perf/
perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check
perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
perf: imx_perf: add support for i.MX95 platform
perf: imx_perf: fix counter start and config sequence
perf: imx_perf: refactor driver for imx93
perf: imx_perf: let the driver manage the counter usage rather the user
perf: imx_perf: add macro definitions for parsing config attr
...
Pull tpm updates from Jarkko Sakkinen:
"A couple of bug fixes.
No new features are coming for this release. I had one in progress but
decided to let it mature up until 6.12"
* tag 'tpmdd-next-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm_tis_spi: add missing attpm20p SPI device ID entry
char: tpm: Fix possible memory leak in tpm_bios_measurements_open()
Pull workqueue updates from Tejun Heo:
- Lai fixed a bug where CPU hotplug and workqueue attribute changes
race leaving some workqueues not fully updated. This involved
refactoring and changing how online CPUs are tracked. The resulting
code is cleaner.
- Workqueue watchdog touch operation was causing too much cacheline
contention on very large machines. Nicholas improved scalabililty by
avoiding unnecessary global updates.
- Code cleanups and minor rescuer behavior improvement.
- The last commit 58629d4871 ("workqueue: Always queue work items to
the newest PWQ for order workqueues") is a cherry-picked straggler
commit from for-6.10-fixes, a fix for a bug which may not actually
trigger.
* tag 'wq-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (24 commits)
workqueue: Always queue work items to the newest PWQ for order workqueues
workqueue: Rename wq_update_pod() to unbound_wq_update_pwq()
workqueue: Remove the arguments @hotplug_cpu and @online from wq_update_pod()
workqueue: Remove the argument @cpu_going_down from wq_calc_pod_cpumask()
workqueue: Remove the unneeded cpumask empty check in wq_calc_pod_cpumask()
workqueue: Remove cpus_read_lock() from apply_wqattrs_lock()
workqueue: Simplify wq_calc_pod_cpumask() with wq_online_cpumask
workqueue: Add wq_online_cpumask
workqueue: Init rescuer's affinities as the wq's effective cpumask
workqueue: Put PWQ allocation and WQ enlistment in the same lock C.S.
workqueue: Move kthread_flush_worker() out of alloc_and_link_pwqs()
workqueue: Make rescuer initialization as the last step of the creation of a new wq
workqueue: Register sysfs after the whole creation of the new wq
workqueue: Simplify goto statement
workqueue: Update cpumasks after only applying it successfully
workqueue: Improve scalability of workqueue watchdog touch
workqueue: wq_watchdog_touch is always called with valid CPU
workqueue: Remove useless pool->dying_workers
workqueue: Detach workers directly in idle_cull_fn()
workqueue: Don't bind the rescuer in the last working cpu
...
Pull cgroup updates from Tejun Heo:
- Added Michal Koutný as a maintainer
- Counters in pids.events were behaving inconsistently. pids.events
made properly hierarchical and pids.events.local added
- misc.peak and misc.events.local added
- cpuset remote partition creation and cpuset.cpus.exclusive handling
improved
- Code cleanups, non-critical fixes, doc updates
- for-6.10-fixes is merged in to receive two non-critical fixes that
didn't trigger pull
* tag 'cgroup-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (23 commits)
cgroup: Add Michal Koutný as a maintainer
cgroup/misc: Introduce misc.events.local
cgroup/rstat: add force idle show helper
cgroup: Protect css->cgroup write under css_set_lock
cgroup/misc: Introduce misc.peak
cgroup_misc: add kernel-doc comments for enum misc_res_type
cgroup/cpuset: Prevent UAF in proc_cpuset_show()
selftest/cgroup: Update test_cpuset_prs.sh to match changes
cgroup/cpuset: Make cpuset.cpus.exclusive independent of cpuset.cpus
cgroup/cpuset: Delay setting of CS_CPU_EXCLUSIVE until valid partition
selftest/cgroup: Fix test_cpuset_prs.sh problems reported by test robot
cgroup/cpuset: Fix remote root partition creation problem
cgroup: avoid the unnecessary list_add(dying_tasks) in cgroup_exit()
cgroup/cpuset: Optimize isolated partition only generate_sched_domains() calls
cgroup/cpuset: Reduce the lock protecting CS_SCHED_LOAD_BALANCE
kernel/cgroup: cleanup cgroup_base_files when fail to add cgroup_psi_files
selftests: cgroup: Add basic tests for pids controller
selftests: cgroup: Lexicographic order in Makefile
cgroup/pids: Add pids.events.local
cgroup/pids: Make event counters hierarchical
...
Pull nolibc updates from Paul McKenney:
- Fix selftest printf format mismatch in expect_str_buf_eq()
- Stop using brk() and sbrk() when testing against musl, which
implements these two functions with ENOMEM
- Make tests use -Werror to force failure on compiler warnings
- Add limits for the {u,}intmax_t, ulong and {u,}llong types
- Implement strtol() and friends
- Add facility to skip nolibc-specific tests when running against
non-nolibc libraries
- Implement strerror()
- Also use strerror() on nolibc when running kselftests
* tag 'nolibc.2024.07.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
selftests: kselftest: also use strerror() on nolibc
tools/nolibc: implement strerror()
selftests/nolibc: introduce condition to run tests only on nolibc
tools/nolibc: implement strtol() and friends
tools/nolibc: add limits for {u,}intmax_t, ulong and {u,}llong
selftests/nolibc: run-tests.sh: use -Werror by default
selftests/nolibc: disable brk()/sbrk() tests on musl
selftests/nolibc: fix printf format mismatch in expect_str_buf_eq()
Pull KCSAN updates from Paul McKenney:
- improve the documentation for the new __data_racy type qualifier
to the data_race() macro's kernel-doc header and to the LKMM's
access-marking documentation
- add missing MODULE_DESCRIPTION
* tag 'kcsan.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
kcsan: Add missing MODULE_DESCRIPTION() macro
kcsan: Add example to data_race() kerneldoc header
Pull torture-test updates from Paul McKenney:
"This adds MODULE_DESCRIPTION() to torture.c, locktorture.c, and
scftorture.c, and also adds 'static' to a global variable that is used
only in scftorture.c"
* tag 'torture.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
scftorture: Make torture_type static
scftorture: Add MODULE_DESCRIPTION()
locktorture: Add MODULE_DESCRIPTION()
torture: Add MODULE_DESCRIPTION()
Pull RCU updates from Paul McKenney:
- Update Tasks RCU and Tasks Rude RCU description in Requirements.rst
and clarify rcu_assign_pointer() and rcu_dereference() ordering
properties
- Add lockdep assertions for RCU readers, limit inline wakeups for
callback-bypass synchronize_rcu(), add an
rcutree.nohz_full_patience_delay to reduce nohz_full OS jitter, add
Uladzislau Rezki as RCU maintainer, and fix a subtle
callback-migration memory-ordering issue
- Remove a number of redundant memory barriers
- Remove unnecessary bypass-list lock-contention mitigation, use
parking API instead of open-coded ad-hoc equivalent, and upgrade
obsolete comments
- Revert avoidance of a deadlock that can no longer occur and properly
synchronize Tasks Trace RCU checking of runqueues
- Add tests for handling of double-call_rcu() bug, add missing
MODULE_DESCRIPTION, and add a script that histograms the number of
calls to RCU updaters
- Fill out SRCU polled-grace-period API
* tag 'rcu.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (29 commits)
rcu: Fix rcu_barrier() VS post CPUHP_TEARDOWN_CPU invocation
rcu: Eliminate lockless accesses to rcu_sync->gp_count
MAINTAINERS: Add Uladzislau Rezki as RCU maintainer
rcu: Add rcutree.nohz_full_patience_delay to reduce nohz_full OS jitter
rcu/exp: Remove redundant full memory barrier at the end of GP
rcu: Remove full memory barrier on RCU stall printout
rcu: Remove full memory barrier on boot time eqs sanity check
rcu/exp: Remove superfluous full memory barrier upon first EQS snapshot
rcu: Remove superfluous full memory barrier upon first EQS snapshot
rcu: Remove full ordering on second EQS snapshot
srcu: Fill out polled grace-period APIs
srcu: Update cleanup_srcu_struct() comment
srcu: Add NUM_ACTIVE_SRCU_POLL_OLDSTATE
srcu: Disable interrupts directly in srcu_gp_end()
rcu: Disable interrupts directly in rcu_gp_init()
rcu/tree: Reduce wake up for synchronize_rcu() common case
rcu/tasks: Fix stale task snaphot for Tasks Trace
tools/rcu: Add rcu-updaters.sh script
rcutorture: Add missing MODULE_DESCRIPTION() macros
rcutorture: Fix rcu_torture_fwd_cb_cr() data race
...
Pull memory model updates from Paul McKenney:
"lkmm: Fix corner-case locking bug and improve documentation
A simple but odd single-process litmus test acquires and immediately
releases a lock, then calls spin_is_locked(). LKMM acts if it was a
deadlock due to an assumption that spin_is_locked() will follow a
spin_lock() or some other process's spin_unlock(). This litmus test
manages to violate this assumption because the spin_is_locked()
follows the same process's spin_unlock().
This series fixes this bug, reorganizes and optimizes the lock.cat
model, and updates documentation"
* tag 'lkmm.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/memory-model: Code reorganization in lock.cat
tools/memory-model: Fix bug in lock.cat
tools/memory-model: Add access-marking.txt to README
tools/memory-model: Add KCSAN LF mentorship session citation
Pull arm byte cmpxchg from Paul McKenney:
"ARM: Provide one-byte cmpxchg emulation
This provides emulated one-byte cmpxchg() support for ARM using the
cmpxchg_emu_u8() function that uses a four-byte cmpxchg() to emulate
the one-byte variant.
Similar patches for emulation of one-byte cmpxchg() for arc, sh, and
xtensa have not yet received maintainer acks, so they are slated for
the v6.12 merge window"
* tag 'cmpxchg.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
ARM: Emulate one-byte cmpxchg
Pull timer updates from Thomas Gleixner:
"Updates for timers, timekeeping and related functionality:
Core:
- Make the takeover of a hrtimer based broadcast timer reliable
during CPU hot-unplug. The current implementation suffers from a
race which can lead to broadcast timer starvation in the worst
case.
- VDSO related cleanups and simplifications
- Small cleanups and enhancements all over the place
PTP:
- Replace the architecture specific base clock to clocksource, e.g.
ART to TSC, conversion function with generic functionality to avoid
exposing such internals to drivers and convert all existing drivers
over. This also allows to provide functionality which converts the
other way round in the core code based on the same parameter set.
- Provide a function to convert CLOCK_REALTIME to the base clock to
support the upcoming PPS output driver on Intel platforms.
Drivers:
- A set of Device Tree bindings for new hardware
- Cleanups and enhancements all over the place"
* tag 'timers-core-2024-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
clocksource/drivers/realtek: Add timer driver for rtl-otto platforms
dt-bindings: timer: Add schema for realtek,otto-timer
dt-bindings: timer: Add SOPHGO SG2002 clint
dt-bindings: timer: renesas,tmu: Add R-Car Gen2 support
dt-bindings: timer: renesas,tmu: Add RZ/G1 support
dt-bindings: timer: renesas,tmu: Add R-Mobile APE6 support
clocksource/drivers/mips-gic-timer: Correct sched_clock width
clocksource/drivers/mips-gic-timer: Refine rating computation
clocksource/drivers/sh_cmt: Address race condition for clock events
clocksource/driver/arm_global_timer: Remove unnecessary ‘0’ values from err
clocksource/drivers/arm_arch_timer: Remove unnecessary ‘0’ values from irq
tick/broadcast: Make takeover of broadcast hrtimer reliable
tick/sched: Combine WARN_ON_ONCE and print_once
x86/vdso: Remove unused include
x86/vgtod: Remove unused typedef gtod_long_t
x86/vdso: Fix function reference in comment
vdso: Add comment about reason for vdso struct ordering
vdso/gettimeofday: Clarify comment about open coded function
timekeeping: Add missing kernel-doc function comments
tick: Remove unnused tick_nohz_get_idle_calls()
...
