ee3392ed16
41454 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Yafang Shao
|
a0c109dcaf |
bpf: Add __rcu_read_{lock,unlock} into btf id deny list
The tracing recursion prevention mechanism must be protected by rcu, that
leaves __rcu_read_{lock,unlock} unprotected by this mechanism. If we trace
them, the recursion will happen. Let's add them into the btf id deny list.
When CONFIG_PREEMPT_RCU is enabled, it can be reproduced with a simple bpf
program as such:
SEC("fentry/__rcu_read_lock")
int fentry_run()
{
return 0;
}
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20230424161104.3737-2-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
Dave Marchevsky
|
7deca5eae8 |
bpf: Disable bpf_refcount_acquire kfunc calls until race conditions are fixed
As reported by Kumar in [0], the shared ownership implementation for BPF programs has some race conditions which need to be addressed before it can safely be used. This patch does so in a minimal way instead of ripping out shared ownership entirely, as proper fixes for the issues raised will follow ASAP, at which point this patch's commit can be reverted to re-enable shared ownership. The patch removes the ability to call bpf_refcount_acquire_impl from BPF programs. Programs can only bump refcount and obtain a new owning reference using this kfunc, so removing the ability to call it effectively disables shared ownership. Instead of changing success / failure expectations for bpf_refcount-related selftests, this patch just disables them from running for now. [0]: https://lore.kernel.org/bpf/d7hyspcow5wtjcmw4fugdgyp3fwhljwuscp3xyut5qnwivyeru@ysdq543otzv2/ Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Link: https://lore.kernel.org/r/20230424204321.2680232-1-davemarchevsky@fb.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Jakub Kicinski
|
9a82cdc28f |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZELn8wAKCRDbK58LschI g1khAQC1nmXPuKjM4EAfFK8Ysb3KoF8ADmpE97n+/HEDydCagwD/bX0+NABR75Nh ueGcoU1TcfcbshDzrH0s+C95owZDZw4= =BeZM -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2023-04-21 We've added 71 non-merge commits during the last 8 day(s) which contain a total of 116 files changed, 13397 insertions(+), 8896 deletions(-). The main changes are: 1) Add a new BPF netfilter program type and minimal support to hook BPF programs to netfilter hooks such as prerouting or forward, from Florian Westphal. 2) Fix race between btf_put and btf_idr walk which caused a deadlock, from Alexei Starovoitov. 3) Second big batch to migrate test_verifier unit tests into test_progs for ease of readability and debugging, from Eduard Zingerman. 4) Add support for refcounted local kptrs to the verifier for allowing shared ownership, useful for adding a node to both the BPF list and rbtree, from Dave Marchevsky. 5) Migrate bpf_for(), bpf_for_each() and bpf_repeat() macros from BPF selftests into libbpf-provided bpf_helpers.h header and improve kfunc handling, from Andrii Nakryiko. 6) Support 64-bit pointers to kfuncs needed for archs like s390x, from Ilya Leoshkevich. 7) Support BPF progs under getsockopt with a NULL optval, from Stanislav Fomichev. 8) Improve verifier u32 scalar equality checking in order to enable LLVM transformations which earlier had to be disabled specifically for BPF backend, from Yonghong Song. 9) Extend bpftool's struct_ops object loading to support links, from Kui-Feng Lee. 10) Add xsk selftest follow-up fixes for hugepage allocated umem, from Magnus Karlsson. 11) Support BPF redirects from tc BPF to ifb devices, from Daniel Borkmann. 12) Add BPF support for integer type when accessing variable length arrays, from Feng Zhou. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (71 commits) selftests/bpf: verifier/value_ptr_arith converted to inline assembly selftests/bpf: verifier/value_illegal_alu converted to inline assembly selftests/bpf: verifier/unpriv converted to inline assembly selftests/bpf: verifier/subreg converted to inline assembly selftests/bpf: verifier/spin_lock converted to inline assembly selftests/bpf: verifier/sock converted to inline assembly selftests/bpf: verifier/search_pruning converted to inline assembly selftests/bpf: verifier/runtime_jit converted to inline assembly selftests/bpf: verifier/regalloc converted to inline assembly selftests/bpf: verifier/ref_tracking converted to inline assembly selftests/bpf: verifier/map_ptr_mixing converted to inline assembly selftests/bpf: verifier/map_in_map converted to inline assembly selftests/bpf: verifier/lwt converted to inline assembly selftests/bpf: verifier/loops1 converted to inline assembly selftests/bpf: verifier/jeq_infer_not_null converted to inline assembly selftests/bpf: verifier/direct_packet_access converted to inline assembly selftests/bpf: verifier/d_path converted to inline assembly selftests/bpf: verifier/ctx converted to inline assembly selftests/bpf: verifier/btf_ctx_access converted to inline assembly selftests/bpf: verifier/bpf_get_stack converted to inline assembly ... ==================== Link: https://lore.kernel.org/r/20230421211035.9111-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Florian Westphal
|
fd9c663b9a |
bpf: minimal support for programs hooked into netfilter framework
This adds minimal support for BPF_PROG_TYPE_NETFILTER bpf programs that will be invoked via the NF_HOOK() points in the ip stack. Invocation incurs an indirect call. This is not a necessity: Its possible to add 'DEFINE_BPF_DISPATCHER(nf_progs)' and handle the program invocation with the same method already done for xdp progs. This isn't done here to keep the size of this chunk down. Verifier restricts verdicts to either DROP or ACCEPT. Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20230421170300.24115-3-fw@strlen.de Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Florian Westphal
|
84601d6ee6 |
bpf: add bpf_link support for BPF_NETFILTER programs
Add bpf_link support skeleton. To keep this reviewable, no bpf program
can be invoked yet, if a program is attached only a c-stub is called and
not the actual bpf program.
Defaults to 'y' if both netfilter and bpf syscall are enabled in kconfig.
Uapi example usage:
union bpf_attr attr = { };
attr.link_create.prog_fd = progfd;
attr.link_create.attach_type = 0; /* unused */
attr.link_create.netfilter.pf = PF_INET;
attr.link_create.netfilter.hooknum = NF_INET_LOCAL_IN;
attr.link_create.netfilter.priority = -128;
err = bpf(BPF_LINK_CREATE, &attr, sizeof(attr));
... this would attach progfd to ipv4:input hook.
Such hook gets removed automatically if the calling program exits.
BPF_NETFILTER program invocation is added in followup change.
NF_HOOK_OP_BPF enum will eventually be read from nfnetlink_hook, it
allows to tell userspace which program is attached at the given hook
when user runs 'nft hook list' command rather than just the priority
and not-very-helpful 'this hook runs a bpf prog but I can't tell which
one'.
Will also be used to disallow registration of two bpf programs with
same priority in a followup patch.
v4: arm32 cmpxchg only supports 32bit operand
s/prio/priority/
v3: restrict prog attachment to ip/ip6 for now, lets lift restrictions if
more use cases pop up (arptables, ebtables, netdev ingress/egress etc).
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-2-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
Stanislav Fomichev
|
00e74ae086 |
bpf: Don't EFAULT for getsockopt with optval=NULL
Some socket options do getsockopt with optval=NULL to estimate the size
of the final buffer (which is returned via optlen). This breaks BPF
getsockopt assumptions about permitted optval buffer size. Let's enforce
these assumptions only when non-NULL optval is provided.
Fixes:
|
||
|
Dave Marchevsky
|
4ab07209d5 |
bpf: Fix bpf_refcount_acquire's refcount_t address calculation
When calculating the address of the refcount_t struct within a local kptr, bpf_refcount_acquire_impl should add refcount_off bytes to the address of the local kptr. Due to some missing parens, the function is incorrectly adding sizeof(refcount_t) * refcount_off bytes. This patch fixes the calculation. Due to the incorrect calculation, bpf_refcount_acquire_impl was trying to refcount_inc some memory well past the end of local kptrs, resulting in kasan and refcount complaints, as reported in [0]. In that thread, Florian and Eduard discovered that bpf selftests written in the new style - with __success and an expected __retval, specifically - were not actually being run. As a result, selftests added in bpf_refcount series weren't really exercising this behavior, and thus didn't unearth the bug. With this fixed behavior it's safe to revert commit |
||
Alexei Starovoitov
|
acf1c3d68e |
bpf: Fix race between btf_put and btf_idr walk.
Florian and Eduard reported hard dead lock: [ 58.433327] _raw_spin_lock_irqsave+0x40/0x50 [ 58.433334] btf_put+0x43/0x90 [ 58.433338] bpf_find_btf_id+0x157/0x240 [ 58.433353] btf_parse_fields+0x921/0x11c0 This happens since btf->refcount can be 1 at the time of btf_put() and btf_put() will call btf_free_id() which will try to grab btf_idr_lock and will dead lock. Avoid the issue by doing btf_put() without locking. Fixes: |
||
|
Jakub Kicinski
|
681c5b51dc |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Adjacent changes: net/mptcp/protocol.h |
||
Linus Torvalds
|
23309d600d |
Networking fixes for 6.3-rc8, including fixes from netfilter and bpf
Current release - regressions:
- sched: clear actions pointer in miss cookie init fail
- mptcp: fix accept vs worker race
- bpf: fix bpf_arch_text_poke() with new_addr == NULL on s390
- eth: bnxt_en: fix a possible NULL pointer dereference in unload path
- eth: veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag
Current release - new code bugs:
- eth: revert "net/mlx5: Enable management PF initialization"
Previous releases - regressions:
- netfilter: fix recent physdev match breakage
- bpf: fix incorrect verifier pruning due to missing register precision taints
- eth: virtio_net: fix overflow inside xdp_linearize_page()
- eth: cxgb4: fix use after free bugs caused by circular dependency problem
- eth: mlxsw: pci: fix possible crash during initialization
Previous releases - always broken:
- sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_agg
- netfilter: validate catch-all set elements
- bridge: don't notify FDB entries with "master dynamic"
- eth: bonding: fix memory leak when changing bond type to ethernet
- eth: i40e: fix accessing vsi->active_filters without holding lock
Misc:
- Mat is back as MPTCP co-maintainer
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=xUNa
-----END PGP SIGNATURE-----
Merge tag 'net-6.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and bpf.
There are a few fixes for new code bugs, including the Mellanox one
noted in the last networking pull. No known regressions outstanding.
Current release - regressions:
- sched: clear actions pointer in miss cookie init fail
- mptcp: fix accept vs worker race
- bpf: fix bpf_arch_text_poke() with new_addr == NULL on s390
- eth: bnxt_en: fix a possible NULL pointer dereference in unload
path
- eth: veth: take into account peer device for
NETDEV_XDP_ACT_NDO_XMIT xdp_features flag
Current release - new code bugs:
- eth: revert "net/mlx5: Enable management PF initialization"
Previous releases - regressions:
- netfilter: fix recent physdev match breakage
- bpf: fix incorrect verifier pruning due to missing register
precision taints
- eth: virtio_net: fix overflow inside xdp_linearize_page()
- eth: cxgb4: fix use after free bugs caused by circular dependency
problem
- eth: mlxsw: pci: fix possible crash during initialization
Previous releases - always broken:
- sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_agg
- netfilter: validate catch-all set elements
- bridge: don't notify FDB entries with "master dynamic"
- eth: bonding: fix memory leak when changing bond type to ethernet
- eth: i40e: fix accessing vsi->active_filters without holding lock
Misc:
- Mat is back as MPTCP co-maintainer"
* tag 'net-6.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits)
net: bridge: switchdev: don't notify FDB entries with "master dynamic"
Revert "net/mlx5: Enable management PF initialization"
MAINTAINERS: Resume MPTCP co-maintainer role
mailmap: add entries for Mat Martineau
e1000e: Disable TSO on i219-LM card to increase speed
bnxt_en: fix free-runnig PHC mode
net: dsa: microchip: ksz8795: Correctly handle huge frame configuration
bpf: Fix incorrect verifier pruning due to missing register precision taints
hamradio: drop ISA_DMA_API dependency
mlxsw: pci: Fix possible crash during initialization
mptcp: fix accept vs worker race
mptcp: stops worker on unaccepted sockets at listener close
net: rpl: fix rpl header size calculation
net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete()
bonding: Fix memory leak when changing bond type to Ethernet
veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag
mlxfw: fix null-ptr-deref in mlxfw_mfa2_tlv_next()
bnxt_en: Fix a possible NULL pointer dereference in unload path
bnxt_en: Do not initialize PTP on older P3/P4 chips
netfilter: nf_tables: tighten netlink attribute requirements for catch-all elements
...
|
||
Feng Zhou
|
2569c7b872 |
bpf: support access variable length array of integer type
After this commit:
bpf: Support variable length array in tracing programs (
|
||
|
Linus Torvalds
|
cb0856346a |
22 hotfixes.
19 are cc:stable and the remainder address issues which were introduced
during this merge cycle, or aren't considered suitable for -stable
backporting.
19 are for MM and the remainder are for other subsystems.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEB7GgAKCRDdBJ7gKXxA
jl4zAP9LxKisY8L29qrZG/SKoYbMMSM33ASOGZJRAuRRaOYL6QEAvS14pg/c22rL
4GCZbzvENY4xPRbz/6kc/s2Jnuww4wA=
=Kh/V
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-04-19-16-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"22 hotfixes.
19 are cc:stable and the remainder address issues which were
introduced during this merge cycle, or aren't considered suitable for
-stable backporting.
19 are for MM and the remainder are for other subsystems"
* tag 'mm-hotfixes-stable-2023-04-19-16-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
nilfs2: initialize unused bytes in segment summary blocks
mm: page_alloc: skip regions with hugetlbfs pages when allocating 1G pages
mm/mmap: regression fix for unmapped_area{_topdown}
maple_tree: fix mas_empty_area() search
maple_tree: make maple state reusable after mas_empty_area_rev()
mm: kmsan: handle alloc failures in kmsan_ioremap_page_range()
mm: kmsan: handle alloc failures in kmsan_vmap_pages_range_noflush()
tools/Makefile: do missed s/vm/mm/
mm: fix memory leak on mm_init error handling
mm/page_alloc: fix potential deadlock on zonelist_update_seq seqlock
kernel/sys.c: fix and improve control flow in __sys_setres[ug]id()
Revert "userfaultfd: don't fail on unrecognized features"
writeback, cgroup: fix null-ptr-deref write in bdi_split_work_to_wbs
maple_tree: fix a potential memory leak, OOB access, or other unpredictable bug
tools/mm/page_owner_sort.c: fix TGID output when cull=tg is used
mailmap: update jtoppins' entry to reference correct email
mm/mempolicy: fix use-after-free of VMA iterator
mm/huge_memory.c: warn with pr_warn_ratelimited instead of VM_WARN_ON_ONCE_FOLIO
mm/mprotect: fix do_mprotect_pkey() return on error
mm/khugepaged: check again on anon uffd-wp during isolation
...
|
||
Daniel Borkmann
|
71b547f561 |
bpf: Fix incorrect verifier pruning due to missing register precision taints
Juan Jose et al reported an issue found via fuzzing where the verifier's
pruning logic prematurely marks a program path as safe.
Consider the following program:
0: (b7) r6 = 1024
1: (b7) r7 = 0
2: (b7) r8 = 0
3: (b7) r9 = -2147483648
4: (97) r6 %= 1025
5: (05) goto pc+0
6: (bd) if r6 <= r9 goto pc+2
7: (97) r6 %= 1
8: (b7) r9 = 0
9: (bd) if r6 <= r9 goto pc+1
10: (b7) r6 = 0
11: (b7) r0 = 0
12: (63) *(u32 *)(r10 -4) = r0
13: (18) r4 = 0xffff888103693400 // map_ptr(ks=4,vs=48)
15: (bf) r1 = r4
16: (bf) r2 = r10
17: (07) r2 += -4
18: (85) call bpf_map_lookup_elem#1
19: (55) if r0 != 0x0 goto pc+1
20: (95) exit
21: (77) r6 >>= 10
22: (27) r6 *= 8192
23: (bf) r1 = r0
24: (0f) r0 += r6
25: (79) r3 = *(u64 *)(r0 +0)
26: (7b) *(u64 *)(r1 +0) = r3
27: (95) exit
The verifier treats this as safe, leading to oob read/write access due
to an incorrect verifier conclusion:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (b7) r6 = 1024 ; R6_w=1024
1: (b7) r7 = 0 ; R7_w=0
2: (b7) r8 = 0 ; R8_w=0
3: (b7) r9 = -2147483648 ; R9_w=-2147483648
4: (97) r6 %= 1025 ; R6_w=scalar()
5: (05) goto pc+0
6: (bd) if r6 <= r9 goto pc+2 ; R6_w=scalar(umin=18446744071562067969,var_off=(0xffffffff00000000; 0xffffffff)) R9_w=-2147483648
7: (97) r6 %= 1 ; R6_w=scalar()
8: (b7) r9 = 0 ; R9=0
9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0
10: (b7) r6 = 0 ; R6_w=0
11: (b7) r0 = 0 ; R0_w=0
12: (63) *(u32 *)(r10 -4) = r0
last_idx 12 first_idx 9
regs=1 stack=0 before 11: (b7) r0 = 0
13: R0_w=0 R10=fp0 fp-8=0000????
13: (18) r4 = 0xffff8ad3886c2a00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0
17: (07) r2 += -4 ; R2_w=fp-4
18: (85) call bpf_map_lookup_elem#1 ; R0=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0)
19: (55) if r0 != 0x0 goto pc+1 ; R0=0
20: (95) exit
from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm????
21: (77) r6 >>= 10 ; R6_w=0
22: (27) r6 *= 8192 ; R6_w=0
23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0)
24: (0f) r0 += r6
last_idx 24 first_idx 19
regs=40 stack=0 before 23: (bf) r1 = r0
regs=40 stack=0 before 22: (27) r6 *= 8192
regs=40 stack=0 before 21: (77) r6 >>= 10
regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1
parent didn't have regs=40 stack=0 marks: R0_rw=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) R6_rw=P0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm????
last_idx 18 first_idx 9
regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1
regs=40 stack=0 before 17: (07) r2 += -4
regs=40 stack=0 before 16: (bf) r2 = r10
regs=40 stack=0 before 15: (bf) r1 = r4
regs=40 stack=0 before 13: (18) r4 = 0xffff8ad3886c2a00
regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0
regs=40 stack=0 before 11: (b7) r0 = 0
regs=40 stack=0 before 10: (b7) r6 = 0
25: (79) r3 = *(u64 *)(r0 +0) ; R0_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar()
26: (7b) *(u64 *)(r1 +0) = r3 ; R1_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar()
27: (95) exit
from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0
11: (b7) r0 = 0 ; R0_w=0
12: (63) *(u32 *)(r10 -4) = r0
last_idx 12 first_idx 11
regs=1 stack=0 before 11: (b7) r0 = 0
13: R0_w=0 R10=fp0 fp-8=0000????
13: (18) r4 = 0xffff8ad3886c2a00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0
17: (07) r2 += -4 ; R2_w=fp-4
18: (85) call bpf_map_lookup_elem#1
frame 0: propagating r6
last_idx 19 first_idx 11
regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1
regs=40 stack=0 before 17: (07) r2 += -4
regs=40 stack=0 before 16: (bf) r2 = r10
regs=40 stack=0 before 15: (bf) r1 = r4
regs=40 stack=0 before 13: (18) r4 = 0xffff8ad3886c2a00
regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0
regs=40 stack=0 before 11: (b7) r0 = 0
parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_r=P0 R7=0 R8=0 R9=0 R10=fp0
last_idx 9 first_idx 9
regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1
parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar() R7_w=0 R8_w=0 R9_rw=0 R10=fp0
last_idx 8 first_idx 0
regs=40 stack=0 before 8: (b7) r9 = 0
regs=40 stack=0 before 7: (97) r6 %= 1
regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
regs=40 stack=0 before 5: (05) goto pc+0
regs=40 stack=0 before 4: (97) r6 %= 1025
regs=40 stack=0 before 3: (b7) r9 = -2147483648
regs=40 stack=0 before 2: (b7) r8 = 0
regs=40 stack=0 before 1: (b7) r7 = 0
regs=40 stack=0 before 0: (b7) r6 = 1024
19: safe
frame 0: propagating r6
last_idx 9 first_idx 0
regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
regs=40 stack=0 before 5: (05) goto pc+0
regs=40 stack=0 before 4: (97) r6 %= 1025
regs=40 stack=0 before 3: (b7) r9 = -2147483648
regs=40 stack=0 before 2: (b7) r8 = 0
regs=40 stack=0 before 1: (b7) r7 = 0
regs=40 stack=0 before 0: (b7) r6 = 1024
from 6 to 9: safe
verification time 110 usec
stack depth 4
processed 36 insns (limit 1000000) max_states_per_insn 0 total_states 3 peak_states 3 mark_read 2
The verifier considers this program as safe by mistakenly pruning unsafe
code paths. In the above func#0, code lines 0-10 are of interest. In line
0-3 registers r6 to r9 are initialized with known scalar values. In line 4
the register r6 is reset to an unknown scalar given the verifier does not
track modulo operations. Due to this, the verifier can also not determine
precisely which branches in line 6 and 9 are taken, therefore it needs to
explore them both.
As can be seen, the verifier starts with exploring the false/fall-through
paths first. The 'from 19 to 21' path has both r6=0 and r9=0 and the pointer
arithmetic on r0 += r6 is therefore considered safe. Given the arithmetic,
r6 is correctly marked for precision tracking where backtracking kicks in
where it walks back the current path all the way where r6 was set to 0 in
the fall-through branch.
Next, the pruning logics pops the path 'from 9 to 11' from the stack. Also
here, the state of the registers is the same, that is, r6=0 and r9=0, so
that at line 19 the path can be pruned as it is considered safe. It is
interesting to note that the conditional in line 9 turned r6 into a more
precise state, that is, in the fall-through path at the beginning of line
10, it is R6=scalar(umin=1), and in the branch-taken path (which is analyzed
here) at the beginning of line 11, r6 turned into a known const r6=0 as
r9=0 prior to that and therefore (unsigned) r6 <= 0 concludes that r6 must
be 0 (**):
[...] ; R6_w=scalar()
9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0
[...]
from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0
[...]
The next path is 'from 6 to 9'. The verifier considers the old and current
state equivalent, and therefore prunes the search incorrectly. Looking into
the two states which are being compared by the pruning logic at line 9, the
old state consists of R6_rwD=Pscalar() R9_rwD=0 R10=fp0 and the new state
consists of R1=ctx(off=0,imm=0) R6_w=scalar(umax=18446744071562067968)
R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0. While r6 had the reg->precise flag
correctly set in the old state, r9 did not. Both r6'es are considered as
equivalent given the old one is a superset of the current, more precise one,
however, r9's actual values (0 vs 0x80000000) mismatch. Given the old r9
did not have reg->precise flag set, the verifier does not consider the
register as contributing to the precision state of r6, and therefore it
considered both r9 states as equivalent. However, for this specific pruned
path (which is also the actual path taken at runtime), register r6 will be
0x400 and r9 0x80000000 when reaching line 21, thus oob-accessing the map.
The purpose of precision tracking is to initially mark registers (including
spilled ones) as imprecise to help verifier's pruning logic finding equivalent
states it can then prune if they don't contribute to the program's safety
aspects. For example, if registers are used for pointer arithmetic or to pass
constant length to a helper, then the verifier sets reg->precise flag and
backtracks the BPF program instruction sequence and chain of verifier states
to ensure that the given register or stack slot including their dependencies
are marked as precisely tracked scalar. This also includes any other registers
and slots that contribute to a tracked state of given registers/stack slot.
This backtracking relies on recorded jmp_history and is able to traverse
entire chain of parent states. This process ends only when all the necessary
registers/slots and their transitive dependencies are marked as precise.
The backtrack_insn() is called from the current instruction up to the first
instruction, and its purpose is to compute a bitmask of registers and stack
slots that need precision tracking in the parent's verifier state. For example,
if a current instruction is r6 = r7, then r6 needs precision after this
instruction and r7 needs precision before this instruction, that is, in the
parent state. Hence for the latter r7 is marked and r6 unmarked.
For the class of jmp/jmp32 instructions, backtrack_insn() today only looks
at call and exit instructions and for all other conditionals the masks
remain as-is. However, in the given situation register r6 has a dependency
on r9 (as described above in **), so also that one needs to be marked for
precision tracking. In other words, if an imprecise register influences a
precise one, then the imprecise register should also be marked precise.
Meaning, in the parent state both dest and src register need to be tracked
for precision and therefore the marking must be more conservative by setting
reg->precise flag for both. The precision propagation needs to cover both
for the conditional: if the src reg was marked but not the dst reg and vice
versa.
After the fix the program is correctly rejected:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (b7) r6 = 1024 ; R6_w=1024
1: (b7) r7 = 0 ; R7_w=0
2: (b7) r8 = 0 ; R8_w=0
3: (b7) r9 = -2147483648 ; R9_w=-2147483648
4: (97) r6 %= 1025 ; R6_w=scalar()
5: (05) goto pc+0
6: (bd) if r6 <= r9 goto pc+2 ; R6_w=scalar(umin=18446744071562067969,var_off=(0xffffffff80000000; 0x7fffffff),u32_min=-2147483648) R9_w=-2147483648
7: (97) r6 %= 1 ; R6_w=scalar()
8: (b7) r9 = 0 ; R9=0
9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0
10: (b7) r6 = 0 ; R6_w=0
11: (b7) r0 = 0 ; R0_w=0
12: (63) *(u32 *)(r10 -4) = r0
last_idx 12 first_idx 9
regs=1 stack=0 before 11: (b7) r0 = 0
13: R0_w=0 R10=fp0 fp-8=0000????
13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0
17: (07) r2 += -4 ; R2_w=fp-4
18: (85) call bpf_map_lookup_elem#1 ; R0=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0)
19: (55) if r0 != 0x0 goto pc+1 ; R0=0
20: (95) exit
from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm????
21: (77) r6 >>= 10 ; R6_w=0
22: (27) r6 *= 8192 ; R6_w=0
23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0)
24: (0f) r0 += r6
last_idx 24 first_idx 19
regs=40 stack=0 before 23: (bf) r1 = r0
regs=40 stack=0 before 22: (27) r6 *= 8192
regs=40 stack=0 before 21: (77) r6 >>= 10
regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1
parent didn't have regs=40 stack=0 marks: R0_rw=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) R6_rw=P0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm????
last_idx 18 first_idx 9
regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1
regs=40 stack=0 before 17: (07) r2 += -4
regs=40 stack=0 before 16: (bf) r2 = r10
regs=40 stack=0 before 15: (bf) r1 = r4
regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00
regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0
regs=40 stack=0 before 11: (b7) r0 = 0
regs=40 stack=0 before 10: (b7) r6 = 0
25: (79) r3 = *(u64 *)(r0 +0) ; R0_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar()
26: (7b) *(u64 *)(r1 +0) = r3 ; R1_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar()
27: (95) exit
from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0
11: (b7) r0 = 0 ; R0_w=0
12: (63) *(u32 *)(r10 -4) = r0
last_idx 12 first_idx 11
regs=1 stack=0 before 11: (b7) r0 = 0
13: R0_w=0 R10=fp0 fp-8=0000????
13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0
17: (07) r2 += -4 ; R2_w=fp-4
18: (85) call bpf_map_lookup_elem#1
frame 0: propagating r6
last_idx 19 first_idx 11
regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1
regs=40 stack=0 before 17: (07) r2 += -4
regs=40 stack=0 before 16: (bf) r2 = r10
regs=40 stack=0 before 15: (bf) r1 = r4
regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00
regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0
regs=40 stack=0 before 11: (b7) r0 = 0
parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_r=P0 R7=0 R8=0 R9=0 R10=fp0
last_idx 9 first_idx 9
regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1
parent didn't have regs=240 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar() R7_w=0 R8_w=0 R9_rw=P0 R10=fp0
last_idx 8 first_idx 0
regs=240 stack=0 before 8: (b7) r9 = 0
regs=40 stack=0 before 7: (97) r6 %= 1
regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
regs=240 stack=0 before 5: (05) goto pc+0
regs=240 stack=0 before 4: (97) r6 %= 1025
regs=240 stack=0 before 3: (b7) r9 = -2147483648
regs=40 stack=0 before 2: (b7) r8 = 0
regs=40 stack=0 before 1: (b7) r7 = 0
regs=40 stack=0 before 0: (b7) r6 = 1024
19: safe
from 6 to 9: R1=ctx(off=0,imm=0) R6_w=scalar(umax=18446744071562067968) R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0
9: (bd) if r6 <= r9 goto pc+1
last_idx 9 first_idx 0
regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
regs=240 stack=0 before 5: (05) goto pc+0
regs=240 stack=0 before 4: (97) r6 %= 1025
regs=240 stack=0 before 3: (b7) r9 = -2147483648
regs=40 stack=0 before 2: (b7) r8 = 0
regs=40 stack=0 before 1: (b7) r7 = 0
regs=40 stack=0 before 0: (b7) r6 = 1024
last_idx 9 first_idx 0
regs=200 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
regs=240 stack=0 before 5: (05) goto pc+0
regs=240 stack=0 before 4: (97) r6 %= 1025
regs=240 stack=0 before 3: (b7) r9 = -2147483648
regs=40 stack=0 before 2: (b7) r8 = 0
regs=40 stack=0 before 1: (b7) r7 = 0
regs=40 stack=0 before 0: (b7) r6 = 1024
11: R6=scalar(umax=18446744071562067968) R9=-2147483648
11: (b7) r0 = 0 ; R0_w=0
12: (63) *(u32 *)(r10 -4) = r0
last_idx 12 first_idx 11
regs=1 stack=0 before 11: (b7) r0 = 0
13: R0_w=0 R10=fp0 fp-8=0000????
13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0
17: (07) r2 += -4 ; R2_w=fp-4
18: (85) call bpf_map_lookup_elem#1 ; R0_w=map_value_or_null(id=3,off=0,ks=4,vs=48,imm=0)
19: (55) if r0 != 0x0 goto pc+1 ; R0_w=0
20: (95) exit
from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=scalar(umax=18446744071562067968) R7=0 R8=0 R9=-2147483648 R10=fp0 fp-8=mmmm????
21: (77) r6 >>= 10 ; R6_w=scalar(umax=18014398507384832,var_off=(0x0; 0x3fffffffffffff))
22: (27) r6 *= 8192 ; R6_w=scalar(smax=9223372036854767616,umax=18446744073709543424,var_off=(0x0; 0xffffffffffffe000),s32_max=2147475456,u32_max=-8192)
23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0)
24: (0f) r0 += r6
last_idx 24 first_idx 21
regs=40 stack=0 before 23: (bf) r1 = r0
regs=40 stack=0 before 22: (27) r6 *= 8192
regs=40 stack=0 before 21: (77) r6 >>= 10
parent didn't have regs=40 stack=0 marks: R0_rw=map_value(off=0,ks=4,vs=48,imm=0) R6_r=Pscalar(umax=18446744071562067968) R7=0 R8=0 R9=-2147483648 R10=fp0 fp-8=mmmm????
last_idx 19 first_idx 11
regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1
regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1
regs=40 stack=0 before 17: (07) r2 += -4
regs=40 stack=0 before 16: (bf) r2 = r10
regs=40 stack=0 before 15: (bf) r1 = r4
regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00
regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0
regs=40 stack=0 before 11: (b7) r0 = 0
parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar(umax=18446744071562067968) R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0
last_idx 9 first_idx 0
regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1
regs=240 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
regs=240 stack=0 before 5: (05) goto pc+0
regs=240 stack=0 before 4: (97) r6 %= 1025
regs=240 stack=0 before 3: (b7) r9 = -2147483648
regs=40 stack=0 before 2: (b7) r8 = 0
regs=40 stack=0 before 1: (b7) r7 = 0
regs=40 stack=0 before 0: (b7) r6 = 1024
math between map_value pointer and register with unbounded min value is not allowed
verification time 886 usec
stack depth 4
processed 49 insns (limit 1000000) max_states_per_insn 1 total_states 5 peak_states 5 mark_read 2
Fixes:
|
||
Mathieu Desnoyers
|
b20b0368c6 |
mm: fix memory leak on mm_init error handling
commit |
||
Ondrej Mosnacek
|
659c0ce1cb |
kernel/sys.c: fix and improve control flow in __sys_setres[ug]id()
Linux Security Modules (LSMs) that implement the "capable" hook will
usually emit an access denial message to the audit log whenever they
"block" the current task from using the given capability based on their
security policy.
The occurrence of a denial is used as an indication that the given task
has attempted an operation that requires the given access permission, so
the callers of functions that perform LSM permission checks must take care
to avoid calling them too early (before it is decided if the permission is
actually needed to perform the requested operation).
The __sys_setres[ug]id() functions violate this convention by first
calling ns_capable_setid() and only then checking if the operation
requires the capability or not. It means that any caller that has the
capability granted by DAC (task's capability set) but not by MAC (LSMs)
will generate a "denied" audit record, even if is doing an operation for
which the capability is not required.
Fix this by reordering the checks such that ns_capable_setid() is checked
last and -EPERM is returned immediately if it returns false.
While there, also do two small optimizations:
* move the capability check before prepare_creds() and
* bail out early in case of a no-op.
Link: https://lkml.kernel.org/r/20230217162154.837549-1-omosnace@redhat.com
Fixes:
|
||
Yonghong Song
|
3be49f7955 |
bpf: Improve verifier u32 scalar equality checking
In [1], I tried to remove bpf-specific codes to prevent certain
llvm optimizations, and add llvm TTI (target transform info) hooks
to prevent those optimizations. During this process, I found
if I enable llvm SimplifyCFG:shouldFoldTwoEntryPHINode
transformation, I will hit the following verification failure with selftests:
...
8: (18) r1 = 0xffffc900001b2230 ; R1_w=map_value(off=560,ks=4,vs=564,imm=0)
10: (61) r1 = *(u32 *)(r1 +0) ; R1_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
; if (skb->tstamp == EGRESS_ENDHOST_MAGIC)
11: (79) r2 = *(u64 *)(r6 +152) ; R2_w=scalar() R6=ctx(off=0,imm=0)
; if (skb->tstamp == EGRESS_ENDHOST_MAGIC)
12: (55) if r2 != 0xb9fbeef goto pc+10 ; R2_w=195018479
13: (bc) w2 = w1 ; R1_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
; if (test < __NR_TESTS)
14: (a6) if w1 < 0x9 goto pc+1 16: R0=2 R1_w=scalar(umax=8,var_off=(0x0; 0xf)) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R6=ctx(off=0,imm=0) R10=fp0
;
16: (27) r2 *= 28 ; R2_w=scalar(umax=120259084260,var_off=(0x0; 0x1ffffffffc),s32_max=2147483644,u32_max=-4)
17: (18) r3 = 0xffffc900001b2118 ; R3_w=map_value(off=280,ks=4,vs=564,imm=0)
19: (0f) r3 += r2 ; R2_w=scalar(umax=120259084260,var_off=(0x0; 0x1ffffffffc),s32_max=2147483644,u32_max=-4) R3_w=map_value(off=280,ks=4,vs=564,umax=120259084260,var_off=(0x0; 0x1ffffffffc),s32_max=2147483644,u32_max=-4)
20: (61) r2 = *(u32 *)(r3 +0)
R3 unbounded memory access, make sure to bounds check any such access
processed 97 insns (limit 1000000) max_states_per_insn 1 total_states 10 peak_states 10 mark_read 6
-- END PROG LOAD LOG --
libbpf: prog 'ingress_fwdns_prio100': failed to load: -13
libbpf: failed to load object 'test_tc_dtime'
libbpf: failed to load BPF skeleton 'test_tc_dtime': -13
...
At insn 14, with condition 'w1 < 9', register r1 is changed from an arbitrary
u32 value to `scalar(umax=8,var_off=(0x0; 0xf))`. Register r2, however, remains
as an arbitrary u32 value. Current verifier won't claim r1/r2 equality if
the previous mov is alu32 ('w2 = w1').
If r1 upper 32bit value is not 0, we indeed cannot clamin r1/r2 equality
after 'w2 = w1'. But in this particular case, we know r1 upper 32bit value
is 0, so it is safe to claim r1/r2 equality. This patch exactly did this.
For a 32bit subreg mov, if the src register upper 32bit is 0,
it is okay to claim equality between src and dst registers.
With this patch, the above verification sequence becomes
...
8: (18) r1 = 0xffffc9000048e230 ; R1_w=map_value(off=560,ks=4,vs=564,imm=0)
10: (61) r1 = *(u32 *)(r1 +0) ; R1_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
; if (skb->tstamp == EGRESS_ENDHOST_MAGIC)
11: (79) r2 = *(u64 *)(r6 +152) ; R2_w=scalar() R6=ctx(off=0,imm=0)
; if (skb->tstamp == EGRESS_ENDHOST_MAGIC)
12: (55) if r2 != 0xb9fbeef goto pc+10 ; R2_w=195018479
13: (bc) w2 = w1 ; R1_w=scalar(id=6,umax=4294967295,var_off=(0x0; 0xffffffff)) R2_w=scalar(id=6,umax=4294967295,var_off=(0x0; 0xffffffff))
; if (test < __NR_TESTS)
14: (a6) if w1 < 0x9 goto pc+1 ; R1_w=scalar(id=6,umin=9,umax=4294967295,var_off=(0x0; 0xffffffff))
...
from 14 to 16: R0=2 R1_w=scalar(id=6,umax=8,var_off=(0x0; 0xf)) R2_w=scalar(id=6,umax=8,var_off=(0x0; 0xf)) R6=ctx(off=0,imm=0) R10=fp0
16: (27) r2 *= 28 ; R2_w=scalar(umax=224,var_off=(0x0; 0xfc))
17: (18) r3 = 0xffffc9000048e118 ; R3_w=map_value(off=280,ks=4,vs=564,imm=0)
19: (0f) r3 += r2
20: (61) r2 = *(u32 *)(r3 +0) ; R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R3_w=map_value(off=280,ks=4,vs=564,umax=224,var_off=(0x0; 0xfc),s32_max=252,u32_max=252)
...
and eventually the bpf program can be verified successfully.
[1] https://reviews.llvm.org/D147968
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230417222134.359714-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
Sean Young
|
69a8c792cd |
bpf: lirc program type should not require SYS_CAP_ADMIN
Make it possible to load lirc program type with just CAP_BPF. There is nothing exceptional about lirc programs that means they require SYS_CAP_ADMIN. In order to attach or detach a lirc program type you need permission to open /dev/lirc0; if you have permission to do that, you can alter all sorts of lirc receiving options. Changing the IR protocol decoder is no different. Right now on a typical distribution /dev/lirc devices are only read/write by root. Ideally we would make them group read/write like other devices so that local users can use them without becoming root. Signed-off-by: Sean Young <sean@mess.org> Link: https://lore.kernel.org/r/ZD0ArKpwnDBJZsrE@gofer.mess.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Linus Torvalds
|
6c538e1adb |
- Do not pull tasks to the local scheduling group if its average load is
higher than the average system load -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmQ76uAACgkQEsHwGGHe VUpsNhAAt8FYuJD0oJs34mNIS75PrK6hd8zETj22BDW3QGdGvHT54DcgDkmCGwtC w2bSyPuNR1ZtLmKWt3EfSGuTDZDE/NS6OwPFgliOe68o76YgeVUezSBeHnaAoRDb 38j5o7X3tvU5Qz1EqWhdiOX7EKUVy7tRK+W49HLHQCEZkpjISg96Qj2Rtu6iXRg2 VPoyxb39NdtSCLDq2+ZkT2NayogX6hESZGDQ3/g9NJeOm4+y2VLqUfA6o9V6Aq5Y KRvWw/VsM6XiCLdkdjHAFMuiYCnXYKLAHuPKfxENqvCpXoA+5KxMadyG02hvAvo3 WGP4sEvfH+NWAtAvAf4wkIwxx420NsTV+GN+XpYTAlg/g9C9uT1OB06k6V7CunkV 3kA+WFyPYAcvd7onVkjQnJ3AI/muFZN+9uZKuBw0K/sjXnDzGHRW3cq0DoKpUDzp 3ehfL1d8reN9k/ZoIlycrsnLTuUxzQfPkG8Wfngw2RwsFJtyO3FcRkAZptTtVcmg vW6Uzn35zhG8FLc5rLt4hHmoFhvbINu9KD3UXD3Ihst/fuvBE+Ys4WEP/UaRr9mg ovHCq0RRcAuOiWeioJJhIw3jaat4yylOPXBkV7Wzd2kMmMyGcHmkFGJCXlzX9EPQ 9KaligBVyfr+SgM1sbob4jAA1ZUBIpUC/gN6Xim62o3W9PWG7tk= =E+yZ -----END PGP SIGNATURE----- Merge tag 'sched_urgent_for_v6.3_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Borislav Petkov: - Do not pull tasks to the local scheduling group if its average load is higher than the average system load * tag 'sched_urgent_for_v6.3_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix imbalance overflow |
||
David Vernet
|
7b4ddf3920 |
bpf: Remove KF_KPTR_GET kfunc flag
We've managed to improve the UX for kptrs significantly over the last 9
months. All of the existing use cases which previously had KF_KPTR_GET
kfuncs (struct bpf_cpumask *, struct task_struct *, and struct cgroup *)
have all been updated to be synchronized using RCU. In other words,
their KF_KPTR_GET kfuncs have been removed in favor of KF_RCU |
KF_ACQUIRE kfuncs, with the pointers themselves also being readable from
maps in an RCU read region thanks to the types being RCU safe.
While KF_KPTR_GET was a logical starting point for kptrs, it's become
clear that they're not the correct abstraction. KF_KPTR_GET is a flag
that essentially does nothing other than enforcing that the argument to
a function is a pointer to a referenced kptr map value. At first glance,
that's a useful thing to guarantee to a kfunc. It gives kfuncs the
ability to try and acquire a reference on that kptr without requiring
the BPF prog to do something like this:
struct kptr_type *in_map, *new = NULL;
in_map = bpf_kptr_xchg(&map->value, NULL);
if (in_map) {
new = bpf_kptr_type_acquire(in_map);
in_map = bpf_kptr_xchg(&map->value, in_map);
if (in_map)
bpf_kptr_type_release(in_map);
}
That's clearly a pretty ugly (and racy) UX, and if using KF_KPTR_GET is
the only alternative, it's better than nothing. However, the problem
with any KF_KPTR_GET kfunc lies in the fact that it always requires some
kind of synchronization in order to safely do an opportunistic acquire
of the kptr in the map. This is because a BPF program running on another
CPU could do a bpf_kptr_xchg() on that map value, and free the kptr
after it's been read by the KF_KPTR_GET kfunc. For example, the
now-removed bpf_task_kptr_get() kfunc did the following:
struct task_struct *bpf_task_kptr_get(struct task_struct **pp)
{
struct task_struct *p;
rcu_read_lock();
p = READ_ONCE(*pp);
/* If p is non-NULL, it could still be freed by another CPU,
* so we have to do an opportunistic refcount_inc_not_zero()
* and return NULL if the task will be freed after the
* current RCU read region.
*/
|f (p && !refcount_inc_not_zero(&p->rcu_users))
p = NULL;
rcu_read_unlock();
return p;
}
In other words, the kfunc uses RCU to ensure that the task remains valid
after it's been peeked from the map. However, this is completely
redundant with just defining a KF_RCU kfunc that itself does a
refcount_inc_not_zero(), which is exactly what bpf_task_acquire() now
does.
So, the question of whether KF_KPTR_GET is useful is actually, "Are
there any synchronization mechanisms / safety flags that are required by
certain kptrs, but which are not provided by the verifier to kfuncs?"
The answer to that question today is "No", because every kptr we
currently care about is RCU protected.
Even if the answer ever became "yes", the proper way to support that
referenced kptr type would be to add support for whatever
synchronization mechanism it requires in the verifier, rather than
giving kfuncs a flag that says, "Here's a pointer to a referenced kptr
in a map, do whatever you need to do."
With all that said -- so as to allow us to consolidate the kfunc API,
and simplify the verifier a bit, this patch removes KF_KPTR_GET, and all
relevant logic from the verifier.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230416084928.326135-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Dave Marchevsky
|
3e81740a90 |
bpf: Centralize btf_field-specific initialization logic
All btf_fields in an object are 0-initialized by memset in
bpf_obj_init. This might not be a valid initial state for some field
types, in which case kfuncs that use the type will properly initialize
their input if it's been 0-initialized. Some BPF graph collection types
and kfuncs do this: bpf_list_{head,node} and bpf_rb_node.
An earlier patch in this series added the bpf_refcount field, for which
the 0 state indicates that the refcounted object should be free'd.
bpf_obj_init treats this field specially, setting refcount to 1 instead
of relying on scattered "refcount is 0? Must have just been initialized,
let's set to 1" logic in kfuncs.
This patch extends this treatment to list and rbtree field types,
allowing most scattered initialization logic in kfuncs to be removed.
Note that bpf_{list_head,rb_root} may be inside a BPF map, in which case
they'll be 0-initialized without passing through the newly-added logic,
so scattered initialization logic must remain for these collection root
types.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230415201811.343116-9-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Dave Marchevsky
|
404ad75a36 |
bpf: Migrate bpf_rbtree_remove to possibly fail
This patch modifies bpf_rbtree_remove to account for possible failure
due to the input rb_node already not being in any collection.
The function can now return NULL, and does when the aforementioned
scenario occurs. As before, on successful removal an owning reference to
the removed node is returned.
Adding KF_RET_NULL to bpf_rbtree_remove's kfunc flags - now KF_RET_NULL |
KF_ACQUIRE - provides the desired verifier semantics:
* retval must be checked for NULL before use
* if NULL, retval's ref_obj_id is released
* retval is a "maybe acquired" owning ref, not a non-owning ref,
so it will live past end of critical section (bpf_spin_unlock), and
thus can be checked for NULL after the end of the CS
BPF programs must add checks
============================
This does change bpf_rbtree_remove's verifier behavior. BPF program
writers will need to add NULL checks to their programs, but the
resulting UX looks natural:
bpf_spin_lock(&glock);
n = bpf_rbtree_first(&ghead);
if (!n) { /* ... */}
res = bpf_rbtree_remove(&ghead, &n->node);
bpf_spin_unlock(&glock);
if (!res) /* Newly-added check after this patch */
return 1;
n = container_of(res, /* ... */);
/* Do something else with n */
bpf_obj_drop(n);
return 0;
The "if (!res)" check above is the only addition necessary for the above
program to pass verification after this patch.
bpf_rbtree_remove no longer clobbers non-owning refs
====================================================
An issue arises when bpf_rbtree_remove fails, though. Consider this
example:
struct node_data {
long key;
struct bpf_list_node l;
struct bpf_rb_node r;
struct bpf_refcount ref;
};
long failed_sum;
void bpf_prog()
{
struct node_data *n = bpf_obj_new(/* ... */);
struct bpf_rb_node *res;
n->key = 10;
bpf_spin_lock(&glock);
bpf_list_push_back(&some_list, &n->l); /* n is now a non-owning ref */
res = bpf_rbtree_remove(&some_tree, &n->r, /* ... */);
if (!res)
failed_sum += n->key; /* not possible */
bpf_spin_unlock(&glock);
/* if (res) { do something useful and drop } ... */
}
The bpf_rbtree_remove in this example will always fail. Similarly to
bpf_spin_unlock, bpf_rbtree_remove is a non-owning reference
invalidation point. The verifier clobbers all non-owning refs after a
bpf_rbtree_remove call, so the "failed_sum += n->key" line will fail
verification, and in fact there's no good way to get information about
the node which failed to add after the invalidation. This patch removes
non-owning reference invalidation from bpf_rbtree_remove to allow the
above usecase to pass verification. The logic for why this is now
possible is as follows:
Before this series, bpf_rbtree_add couldn't fail and thus assumed that
its input, a non-owning reference, was in the tree. But it's easy to
construct an example where two non-owning references pointing to the same
underlying memory are acquired and passed to rbtree_remove one after
another (see rbtree_api_release_aliasing in
selftests/bpf/progs/rbtree_fail.c).
So it was necessary to clobber non-owning refs to prevent this
case and, more generally, to enforce "non-owning ref is definitely
in some collection" invariant. This series removes that invariant and
the failure / runtime checking added in this patch provide a clean way
to deal with the aliasing issue - just fail to remove.
Because the aliasing issue prevented by clobbering non-owning refs is no
longer an issue, this patch removes the invalidate_non_owning_refs
call from verifier handling of bpf_rbtree_remove. Note that
bpf_spin_unlock - the other caller of invalidate_non_owning_refs -
clobbers non-owning refs for a different reason, so its clobbering
behavior remains unchanged.
No BPF program changes are necessary for programs to remain valid as a
result of this clobbering change. A valid program before this patch
passed verification with its non-owning refs having shorter (or equal)
lifetimes due to more aggressive clobbering.
Also, update existing tests to check bpf_rbtree_remove retval for NULL
where necessary, and move rbtree_api_release_aliasing from
progs/rbtree_fail.c to progs/rbtree.c since it's now expected to pass
verification.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230415201811.343116-8-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Dave Marchevsky
|
d2dcc67df9 |
bpf: Migrate bpf_rbtree_add and bpf_list_push_{front,back} to possibly fail
Consider this code snippet:
struct node {
long key;
bpf_list_node l;
bpf_rb_node r;
bpf_refcount ref;
}
int some_bpf_prog(void *ctx)
{
struct node *n = bpf_obj_new(/*...*/), *m;
bpf_spin_lock(&glock);
bpf_rbtree_add(&some_tree, &n->r, /* ... */);
m = bpf_refcount_acquire(n);
bpf_rbtree_add(&other_tree, &m->r, /* ... */);
bpf_spin_unlock(&glock);
/* ... */
}
After bpf_refcount_acquire, n and m point to the same underlying memory,
and that node's bpf_rb_node field is being used by the some_tree insert,
so overwriting it as a result of the second insert is an error. In order
to properly support refcounted nodes, the rbtree and list insert
functions must be allowed to fail. This patch adds such support.
The kfuncs bpf_rbtree_add, bpf_list_push_{front,back} are modified to
return an int indicating success/failure, with 0 -> success, nonzero ->
failure.
bpf_obj_drop on failure
=======================
Currently the only reason an insert can fail is the example above: the
bpf_{list,rb}_node is already in use. When such a failure occurs, the
insert kfuncs will bpf_obj_drop the input node. This allows the insert
operations to logically fail without changing their verifier owning ref
behavior, namely the unconditional release_reference of the input
owning ref.
With insert that always succeeds, ownership of the node is always passed
to the collection, since the node always ends up in the collection.
With a possibly-failed insert w/ bpf_obj_drop, ownership of the node
is always passed either to the collection (success), or to bpf_obj_drop
(failure). Regardless, it's correct to continue unconditionally
releasing the input owning ref, as something is always taking ownership
from the calling program on insert.
Keeping owning ref behavior unchanged results in a nice default UX for
insert functions that can fail. If the program's reaction to a failed
insert is "fine, just get rid of this owning ref for me and let me go
on with my business", then there's no reason to check for failure since
that's default behavior. e.g.:
long important_failures = 0;
int some_bpf_prog(void *ctx)
{
struct node *n, *m, *o; /* all bpf_obj_new'd */
bpf_spin_lock(&glock);
bpf_rbtree_add(&some_tree, &n->node, /* ... */);
bpf_rbtree_add(&some_tree, &m->node, /* ... */);
if (bpf_rbtree_add(&some_tree, &o->node, /* ... */)) {
important_failures++;
}
bpf_spin_unlock(&glock);
}
If we instead chose to pass ownership back to the program on failed
insert - by returning NULL on success or an owning ref on failure -
programs would always have to do something with the returned ref on
failure. The most likely action is probably "I'll just get rid of this
owning ref and go about my business", which ideally would look like:
if (n = bpf_rbtree_add(&some_tree, &n->node, /* ... */))
bpf_obj_drop(n);
But bpf_obj_drop isn't allowed in a critical section and inserts must
occur within one, so in reality error handling would become a
hard-to-parse mess.
For refcounted nodes, we can replicate the "pass ownership back to
program on failure" logic with this patch's semantics, albeit in an ugly
way:
struct node *n = bpf_obj_new(/* ... */), *m;
bpf_spin_lock(&glock);
m = bpf_refcount_acquire(n);
if (bpf_rbtree_add(&some_tree, &n->node, /* ... */)) {
/* Do something with m */
}
bpf_spin_unlock(&glock);
bpf_obj_drop(m);
bpf_refcount_acquire is used to simulate "return owning ref on failure".
This should be an uncommon occurrence, though.
Addition of two verifier-fixup'd args to collection inserts
===========================================================
The actual bpf_obj_drop kfunc is
bpf_obj_drop_impl(void *, struct btf_struct_meta *), with bpf_obj_drop
macro populating the second arg with 0 and the verifier later filling in
the arg during insn fixup.
Because bpf_rbtree_add and bpf_list_push_{front,back} now might do
bpf_obj_drop, these kfuncs need a btf_struct_meta parameter that can be
passed to bpf_obj_drop_impl.
Similarly, because the 'node' param to those insert functions is the
bpf_{list,rb}_node within the node type, and bpf_obj_drop expects a
pointer to the beginning of the node, the insert functions need to be
able to find the beginning of the node struct. A second
verifier-populated param is necessary: the offset of {list,rb}_node within the
node type.
These two new params allow the insert kfuncs to correctly call
__bpf_obj_drop_impl:
beginning_of_node = bpf_rb_node_ptr - offset
if (already_inserted)
__bpf_obj_drop_impl(beginning_of_node, btf_struct_meta->record);
Similarly to other kfuncs with "hidden" verifier-populated params, the
insert functions are renamed with _impl prefix and a macro is provided
for common usage. For example, bpf_rbtree_add kfunc is now
bpf_rbtree_add_impl and bpf_rbtree_add is now a macro which sets
"hidden" args to 0.
Due to the two new args BPF progs will need to be recompiled to work
with the new _impl kfuncs.
This patch also rewrites the "hidden argument" explanation to more
directly say why the BPF program writer doesn't need to populate the
arguments with anything meaningful.
How does this new logic affect non-owning references?
=====================================================
Currently, non-owning refs are valid until the end of the critical
section in which they're created. We can make this guarantee because, if
a non-owning ref exists, the referent was added to some collection. The
collection will drop() its nodes when it goes away, but it can't go away
while our program is accessing it, so that's not a problem. If the
referent is removed from the collection in the same CS that it was added
in, it can't be bpf_obj_drop'd until after CS end. Those are the only
two ways to free the referent's memory and neither can happen until
after the non-owning ref's lifetime ends.
On first glance, having these collection insert functions potentially
bpf_obj_drop their input seems like it breaks the "can't be
bpf_obj_drop'd until after CS end" line of reasoning. But we care about
the memory not being _freed_ until end of CS end, and a previous patch
in the series modified bpf_obj_drop such that it doesn't free refcounted
nodes until refcount == 0. So the statement can be more accurately
rewritten as "can't be free'd until after CS end".
We can prove that this rewritten statement holds for any non-owning
reference produced by collection insert functions:
* If the input to the insert function is _not_ refcounted
* We have an owning reference to the input, and can conclude it isn't
in any collection
* Inserting a node in a collection turns owning refs into
non-owning, and since our input type isn't refcounted, there's no
way to obtain additional owning refs to the same underlying
memory
* Because our node isn't in any collection, the insert operation
cannot fail, so bpf_obj_drop will not execute
* If bpf_obj_drop is guaranteed not to execute, there's no risk of
memory being free'd
* Otherwise, the input to the insert function is refcounted
* If the insert operation fails due to the node's list_head or rb_root
already being in some collection, there was some previous successful
insert which passed refcount to the collection
* We have an owning reference to the input, it must have been
acquired via bpf_refcount_acquire, which bumped the refcount
* refcount must be >= 2 since there's a valid owning reference and the
node is already in a collection
* Insert triggering bpf_obj_drop will decr refcount to >= 1, never
resulting in a free
So although we may do bpf_obj_drop during the critical section, this
will never result in memory being free'd, and no changes to non-owning
ref logic are needed in this patch.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230415201811.343116-6-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Dave Marchevsky
|
7c50b1cb76 |
bpf: Add bpf_refcount_acquire kfunc
Currently, BPF programs can interact with the lifetime of refcounted
local kptrs in the following ways:
bpf_obj_new - Initialize refcount to 1 as part of new object creation
bpf_obj_drop - Decrement refcount and free object if it's 0
collection add - Pass ownership to the collection. No change to
refcount but collection is responsible for
bpf_obj_dropping it
In order to be able to add a refcounted local kptr to multiple
collections we need to be able to increment the refcount and acquire a
new owning reference. This patch adds a kfunc, bpf_refcount_acquire,
implementing such an operation.
bpf_refcount_acquire takes a refcounted local kptr and returns a new
owning reference to the same underlying memory as the input. The input
can be either owning or non-owning. To reinforce why this is safe,
consider the following code snippets:
struct node *n = bpf_obj_new(typeof(*n)); // A
struct node *m = bpf_refcount_acquire(n); // B
In the above snippet, n will be alive with refcount=1 after (A), and
since nothing changes that state before (B), it's obviously safe. If
n is instead added to some rbtree, we can still safely refcount_acquire
it:
struct node *n = bpf_obj_new(typeof(*n));
struct node *m;
bpf_spin_lock(&glock);
bpf_rbtree_add(&groot, &n->node, less); // A
m = bpf_refcount_acquire(n); // B
bpf_spin_unlock(&glock);
In the above snippet, after (A) n is a non-owning reference, and after
(B) m is an owning reference pointing to the same memory as n. Although
n has no ownership of that memory's lifetime, it's guaranteed to be
alive until the end of the critical section, and n would be clobbered if
we were past the end of the critical section, so it's safe to bump
refcount.
Implementation details:
* From verifier's perspective, bpf_refcount_acquire handling is similar
to bpf_obj_new and bpf_obj_drop. Like the former, it returns a new
owning reference matching input type, although like the latter, type
can be inferred from concrete kptr input. Verifier changes in
{check,fixup}_kfunc_call and check_kfunc_args are largely copied from
aforementioned functions' verifier changes.
* An exception to the above is the new KF_ARG_PTR_TO_REFCOUNTED_KPTR
arg, indicated by new "__refcounted_kptr" kfunc arg suffix. This is
necessary in order to handle both owning and non-owning input without
adding special-casing to "__alloc" arg handling. Also a convenient
place to confirm that input type has bpf_refcount field.
* The implemented kfunc is actually bpf_refcount_acquire_impl, with
'hidden' second arg that the verifier sets to the type's struct_meta
in fixup_kfunc_call.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230415201811.343116-5-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Dave Marchevsky
|
1512217c47 |
bpf: Support refcounted local kptrs in existing semantics
A local kptr is considered 'refcounted' when it is of a type that has a bpf_refcount field. When such a kptr is created, its refcount should be initialized to 1; when destroyed, the object should be free'd only if a refcount decr results in 0 refcount. Existing logic always frees the underlying memory when destroying a local kptr, and 0-initializes all btf_record fields. This patch adds checks for "is local kptr refcounted?" and new logic for that case in the appropriate places. This patch focuses on changing existing semantics and thus conspicuously does _not_ provide a way for BPF programs in increment refcount. That follows later in the series. __bpf_obj_drop_impl is modified to do the right thing when it sees a refcounted type. Container types for graph nodes (list, tree, stashed in map) are migrated to use __bpf_obj_drop_impl as a destructor for their nodes instead of each having custom destruction code in their _free paths. Now that "drop" isn't a synonym for "free" when the type is refcounted it makes sense to centralize this logic. Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Link: https://lore.kernel.org/r/20230415201811.343116-4-davemarchevsky@fb.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Dave Marchevsky
|
d54730b50b |
bpf: Introduce opaque bpf_refcount struct and add btf_record plumbing
A 'struct bpf_refcount' is added to the set of opaque uapi/bpf.h types meant for use in BPF programs. Similarly to other opaque types like bpf_spin_lock and bpf_rbtree_node, the verifier needs to know where in user-defined struct types a bpf_refcount can be located, so necessary btf_record plumbing is added to enable this. bpf_refcount is sized to hold a refcount_t. Similarly to bpf_spin_lock, the offset of a bpf_refcount is cached in btf_record as refcount_off in addition to being in the field array. Caching refcount_off makes sense for this field because further patches in the series will modify functions that take local kptrs (e.g. bpf_obj_drop) to change their behavior if the type they're operating on is refcounted. So enabling fast "is this type refcounted?" checks is desirable. No such verifier behavior changes are introduced in this patch, just logic to recognize 'struct bpf_refcount' in btf_record. Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Link: https://lore.kernel.org/r/20230415201811.343116-3-davemarchevsky@fb.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Dave Marchevsky
|
cd2a807901 |
bpf: Remove btf_field_offs, use btf_record's fields instead
The btf_field_offs struct contains (offset, size) for btf_record fields,
sorted by offset. btf_field_offs is always used in conjunction with
btf_record, which has btf_field 'fields' array with (offset, type), the
latter of which btf_field_offs' size is derived from via
btf_field_type_size.
This patch adds a size field to struct btf_field and sorts btf_record's
fields by offset, making it possible to get rid of btf_field_offs. Less
data duplication and less code complexity results.
Since btf_field_offs' lifetime closely followed the btf_record used to
populate it, most complexity wins are from removal of initialization
code like:
if (btf_record_successfully_initialized) {
foffs = btf_parse_field_offs(rec);
if (IS_ERR_OR_NULL(foffs))
// free the btf_record and return err
}
Other changes in this patch are pretty mechanical:
* foffs->field_off[i] -> rec->fields[i].offset
* foffs->field_sz[i] -> rec->fields[i].size
* Sort rec->fields in btf_parse_fields before returning
* It's possible that this is necessary independently of other
changes in this patch. btf_record_find in syscall.c expects
btf_record's fields to be sorted by offset, yet there's no
explicit sorting of them before this patch, record's fields are
populated in the order they're read from BTF struct definition.
BTF docs don't say anything about the sortedness of struct fields.
* All functions taking struct btf_field_offs * input now instead take
struct btf_record *. All callsites of these functions already have
access to the correct btf_record.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230415201811.343116-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
Ilya Leoshkevich
|
1cf3bfc60f |
bpf: Support 64-bit pointers to kfuncs
test_ksyms_module fails to emit a kfunc call targeting a module on s390x, because the verifier stores the difference between kfunc address and __bpf_call_base in bpf_insn.imm, which is s32, and modules are roughly (1 << 42) bytes away from the kernel on s390x. Fix by keeping BTF id in bpf_insn.imm for BPF_PSEUDO_KFUNC_CALLs, and storing the absolute address in bpf_kfunc_desc. Introduce bpf_jit_supports_far_kfunc_call() in order to limit this new behavior to the s390x JIT. Otherwise other JITs need to be modified, which is not desired. Introduce bpf_get_kfunc_addr() instead of exposing both find_kfunc_desc() and struct bpf_kfunc_desc. In addition to sorting kfuncs by imm, also sort them by offset, in order to handle conflicting imms from different modules. Do this on all architectures in order to simplify code. Factor out resolving specialized kfuncs (XPD and dynptr) from fixup_kfunc_call(). This was required in the first place, because fixup_kfunc_call() uses find_kfunc_desc(), which returns a const pointer, so it's not possible to modify kfunc addr without stripping const, which is not nice. It also removes repetition of code like: if (bpf_jit_supports_far_kfunc_call()) desc->addr = func; else insn->imm = BPF_CALL_IMM(func); and separates kfunc_desc_tab fixups from kfunc_call fixups. Suggested-by: Jiri Olsa <olsajiri@gmail.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20230412230632.885985-1-iii@linux.ibm.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Yafang
|
c11bd04648 |
bpf: Add preempt_count_{sub,add} into btf id deny list
The recursion check in __bpf_prog_enter* and __bpf_prog_exit*
leave preempt_count_{sub,add} unprotected. When attaching trampoline to
them we get panic as follows,
[ 867.843050] BUG: TASK stack guard page was hit at 0000000009d325cf (stack is 0000000046a46a15..00000000537e7b28)
[ 867.843064] stack guard page: 0000 [#1] PREEMPT SMP NOPTI
[ 867.843067] CPU: 8 PID: 11009 Comm: trace Kdump: loaded Not tainted 6.2.0+ #4
[ 867.843100] Call Trace:
[ 867.843101] <TASK>
[ 867.843104] asm_exc_int3+0x3a/0x40
[ 867.843108] RIP: 0010:preempt_count_sub+0x1/0xa0
[ 867.843135] __bpf_prog_enter_recur+0x17/0x90
[ 867.843148] bpf_trampoline_6442468108_0+0x2e/0x1000
[ 867.843154] ? preempt_count_sub+0x1/0xa0
[ 867.843157] preempt_count_sub+0x5/0xa0
[ 867.843159] ? migrate_enable+0xac/0xf0
[ 867.843164] __bpf_prog_exit_recur+0x2d/0x40
[ 867.843168] bpf_trampoline_6442468108_0+0x55/0x1000
...
[ 867.843788] preempt_count_sub+0x5/0xa0
[ 867.843793] ? migrate_enable+0xac/0xf0
[ 867.843829] __bpf_prog_exit_recur+0x2d/0x40
[ 867.843837] BUG: IRQ stack guard page was hit at 0000000099bd8228 (stack is 00000000b23e2bc4..000000006d95af35)
[ 867.843841] BUG: IRQ stack guard page was hit at 000000005ae07924 (stack is 00000000ffd69623..0000000014eb594c)
[ 867.843843] BUG: IRQ stack guard page was hit at 00000000028320f0 (stack is 00000000034b6438..0000000078d1bcec)
[ 867.843842] bpf_trampoline_6442468108_0+0x55/0x1000
...
That is because in __bpf_prog_exit_recur, the preempt_count_{sub,add} are
called after prog->active is decreased.
Fixing this by adding these two functions into btf ids deny list.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Yafang <laoar.shao@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20230413025248.79764-1-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Jakub Kicinski
|
c2865b1122 |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZDhSiwAKCRDbK58LschI
g8cbAQCH4xrquOeDmYyGXFQGchHZAIj++tKg8ABU4+hYeJtrlwEA6D4W6wjoSZRk
mLSptZ9qro8yZA86BvyPvlBT1h9ELQA=
=StAc
-----END PGP SIGNATURE-----
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-04-13
We've added 260 non-merge commits during the last 36 day(s) which contain
a total of 356 files changed, 21786 insertions(+), 11275 deletions(-).
The main changes are:
1) Rework BPF verifier log behavior and implement it as a rotating log
by default with the option to retain old-style fixed log behavior,
from Andrii Nakryiko.
2) Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params, from Christian Ehrig.
3) Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton,
from Alexei Starovoitov.
4) Optimize hashmap lookups when key size is multiple of 4,
from Anton Protopopov.
5) Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps, from David Vernet.
6) Add support for stashing local BPF kptr into a map value via
bpf_kptr_xchg(). This is useful e.g. for rbtree node creation
for new cgroups, from Dave Marchevsky.
7) Fix BTF handling of is_int_ptr to skip modifiers to work around
tracing issues where a program cannot be attached, from Feng Zhou.
8) Migrate a big portion of test_verifier unit tests over to
test_progs -a verifier_* via inline asm to ease {read,debug}ability,
from Eduard Zingerman.
9) Several updates to the instruction-set.rst documentation
which is subject to future IETF standardization
(https://lwn.net/Articles/926882/), from Dave Thaler.
10) Fix BPF verifier in the __reg_bound_offset's 64->32 tnum sub-register
known bits information propagation, from Daniel Borkmann.
11) Add skb bitfield compaction work related to BPF with the overall goal
to make more of the sk_buff bits optional, from Jakub Kicinski.
12) BPF selftest cleanups for build id extraction which stand on its own
from the upcoming integration work of build id into struct file object,
from Jiri Olsa.
13) Add fixes and optimizations for xsk descriptor validation and several
selftest improvements for xsk sockets, from Kal Conley.
14) Add BPF links for struct_ops and enable switching implementations
of BPF TCP cong-ctls under a given name by replacing backing
struct_ops map, from Kui-Feng Lee.
15) Remove a misleading BPF verifier env->bypass_spec_v1 check on variable
offset stack read as earlier Spectre checks cover this,
from Luis Gerhorst.
16) Fix issues in copy_from_user_nofault() for BPF and other tracers
to resemble copy_from_user_nmi() from safety PoV, from Florian Lehner
and Alexei Starovoitov.
17) Add --json-summary option to test_progs in order for CI tooling to
ease parsing of test results, from Manu Bretelle.
18) Batch of improvements and refactoring to prep for upcoming
bpf_local_storage conversion to bpf_mem_cache_{alloc,free} allocator,
from Martin KaFai Lau.
19) Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations,
from Quentin Monnet.
20) Fix attaching fentry/fexit/fmod_ret/lsm to modules by extracting
the module name from BTF of the target and searching kallsyms of
the correct module, from Viktor Malik.
21) Improve BPF verifier handling of '<const> <cond> <non_const>'
to better detect whether in particular jmp32 branches are taken,
from Yonghong Song.
22) Allow BPF TCP cong-ctls to write app_limited of struct tcp_sock.
A built-in cc or one from a kernel module is already able to write
to app_limited, from Yixin Shen.
Conflicts:
Documentation/bpf/bpf_devel_QA.rst
|
||
|
Linus Torvalds
|
44149752e9 |
cgroup: Fixes for v6.3-rc6
* Fix several cpuset bugs including one where it wasn't applying the target
cgroup when tasks are created with CLONE_INTO_CGROUP.
* Fix inversed locking order in cgroup1 freezer implementation.
* Fix garbage cpu.stat::core_sched.forceidle_usec reporting in the root
cgroup.
This is a relatively big pull request this late in the cycle but the major
contributor is the above mentioned cpuset bug which is rather significant.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZDiJuw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGbUfAQCLYhxijWvCpRYlQ3mfd1pgyvWNB90o4lnFkltz
D0iSpwD/SOL5zwkR7WBeejJDKVIsezPpz3SZvxzzKMSk1VODkgo=
=eOCG
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.3-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"This is a relatively big pull request this late in the cycle but the
major contributor is the cpuset bug which is rather significant:
- Fix several cpuset bugs including one where it wasn't applying the
target cgroup when tasks are created with CLONE_INTO_CGROUP
With a few smaller fixes:
- Fix inversed locking order in cgroup1 freezer implementation
- Fix garbage cpu.stat::core_sched.forceidle_usec reporting in the
root cgroup"
* tag 'cgroup-for-6.3-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Make cpuset_attach_task() skip subpartitions CPUs for top_cpuset
cgroup/cpuset: Add cpuset_can_fork() and cpuset_cancel_fork() methods
cgroup/cpuset: Make cpuset_fork() handle CLONE_INTO_CGROUP properly
cgroup/cpuset: Wake up cpuset_attach_wq tasks in cpuset_cancel_attach()
cgroup,freezer: hold cpu_hotplug_lock before freezer_mutex
cgroup/cpuset: Fix partition root's cpuset.cpus update bug
cgroup: fix display of forceidle time at root
|
||
|
Jakub Kicinski
|
800e68c44f |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Conflicts: tools/testing/selftests/net/config |
||
|
David Vernet
|
6499fe6edc |
bpf: Remove bpf_cgroup_kptr_get() kfunc
Now that bpf_cgroup_acquire() is KF_RCU | KF_RET_NULL, bpf_cgroup_kptr_get() is redundant. Let's remove it, and update selftests to instead use bpf_cgroup_acquire() where appropriate. The next patch will update the BPF documentation to not mention bpf_cgroup_kptr_get(). Signed-off-by: David Vernet <void@manifault.com> Link: https://lore.kernel.org/r/20230411041633.179404-2-void@manifault.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
David Vernet
|
1d71283987 |
bpf: Make bpf_cgroup_acquire() KF_RCU | KF_RET_NULL
struct cgroup is already an RCU-safe type in the verifier. We can therefore update bpf_cgroup_acquire() to be KF_RCU | KF_RET_NULL, and subsequently remove bpf_cgroup_kptr_get(). This patch does the first of these by updating bpf_cgroup_acquire() to be KF_RCU | KF_RET_NULL, and also updates selftests accordingly. Signed-off-by: David Vernet <void@manifault.com> Link: https://lore.kernel.org/r/20230411041633.179404-1-void@manifault.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Waiman Long
|
7e27cb6ad4 |
cgroup/cpuset: Make cpuset_attach_task() skip subpartitions CPUs for top_cpuset
It is found that attaching a task to the top_cpuset does not currently ignore CPUs allocated to subpartitions in cpuset_attach_task(). So the code is changed to fix that. Signed-off-by: Waiman Long <longman@redhat.com> Reviewed-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org> |
||
|
Waiman Long
|
eee8785379 |
cgroup/cpuset: Add cpuset_can_fork() and cpuset_cancel_fork() methods
In the case of CLONE_INTO_CGROUP, not all cpusets are ready to accept
new tasks. It is too late to check that in cpuset_fork(). So we need
to add the cpuset_can_fork() and cpuset_cancel_fork() methods to
pre-check it before we can allow attachment to a different cpuset.
We also need to set the attach_in_progress flag to alert other code
that a new task is going to be added to the cpuset.
Fixes:
|
||
|
Waiman Long
|
42a11bf5c5 |
cgroup/cpuset: Make cpuset_fork() handle CLONE_INTO_CGROUP properly
By default, the clone(2) syscall spawn a child process into the same cgroup as its parent. With the use of the CLONE_INTO_CGROUP flag introduced by commit |
||
|
Waiman Long
|
ba9182a896 |
cgroup/cpuset: Wake up cpuset_attach_wq tasks in cpuset_cancel_attach()
After a successful cpuset_can_attach() call which increments the
attach_in_progress flag, either cpuset_cancel_attach() or cpuset_attach()
will be called later. In cpuset_attach(), tasks in cpuset_attach_wq,
if present, will be woken up at the end. That is not the case in
cpuset_cancel_attach(). So missed wakeup is possible if the attach
operation is somehow cancelled. Fix that by doing the wakeup in
cpuset_cancel_attach() as well.
Fixes:
|
||
Tetsuo Handa
|
57dcd64c7e |
cgroup,freezer: hold cpu_hotplug_lock before freezer_mutex
syzbot is reporting circular locking dependency between cpu_hotplug_lock and freezer_mutex, for commit |
||
|
Alexei Starovoitov
|
10fd5f70c3 |
bpf: Handle NULL in bpf_local_storage_free.
During OOM bpf_local_storage_alloc() may fail to allocate 'storage' and
call to bpf_local_storage_free() with NULL pointer will cause a crash like:
[ 271718.917646] BUG: kernel NULL pointer dereference, address: 00000000000000a0
[ 271719.019620] RIP: 0010:call_rcu+0x2d/0x240
[ 271719.216274] bpf_local_storage_alloc+0x19e/0x1e0
[ 271719.250121] bpf_local_storage_update+0x33b/0x740
Fixes:
|
||
Vincent Guittot
|
91dcf1e806 |
sched/fair: Fix imbalance overflow
When local group is fully busy but its average load is above system load,
computing the imbalance will overflow and local group is not the best
target for pulling this load.
Fixes:
|
||
|
Feng Zhou
|
91f2dc6838 |
bpf/btf: Fix is_int_ptr()
When tracing a kernel function with arg type is u32*, btf_ctx_access() would report error: arg2 type INT is not a struct. The commit |
||
Andrii Nakryiko
|
fac08d45e2 |
bpf: Relax log_buf NULL conditions when log_level>0 is requested
Drop the log_size>0 and log_buf!=NULL condition when log_level>0. This allows users to request log_true_size of a full log without providing actual (even if small) log buffer. Verifier log handling code was mostly ready to handle NULL log->ubuf, so only few small changes were necessary to prevent NULL log->ubuf from causing problems. Note, that if user provided NULL log_buf with log_level>0 we don't consider this a log truncation, and thus won't return -ENOSPC. We also enforce that either (log_buf==NULL && log_size==0) or (log_buf!=NULL && log_size>0). Suggested-by: Lorenz Bauer <lmb@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-15-andrii@kernel.org |
||
|
Andrii Nakryiko
|
bdcab4144f |
bpf: Simplify internal verifier log interface
Simplify internal verifier log API down to bpf_vlog_init() and bpf_vlog_finalize(). The former handles input arguments validation in one place and makes it easier to change it. The latter subsumes -ENOSPC (truncation) and -EFAULT handling and simplifies both caller's code (bpf_check() and btf_parse()). For btf_parse(), this patch also makes sure that verifier log finalization happens even if there is some error condition during BTF verification process prior to normal finalization step. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-14-andrii@kernel.org |
||
|
Andrii Nakryiko
|
47a71c1f9a |
bpf: Add log_true_size output field to return necessary log buffer size
Add output-only log_true_size and btf_log_true_size field to BPF_PROG_LOAD and BPF_BTF_LOAD commands, respectively. It will return the size of log buffer necessary to fit in all the log contents at specified log_level. This is very useful for BPF loader libraries like libbpf to be able to size log buffer correctly, but could be used by users directly, if necessary, as well. This patch plumbs all this through the code, taking into account actual bpf_attr size provided by user to determine if these new fields are expected by users. And if they are, set them from kernel on return. We refactory btf_parse() function to accommodate this, moving attr and uattr handling inside it. The rest is very straightforward code, which is split from the logging accounting changes in the previous patch to make it simpler to review logic vs UAPI changes. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-13-andrii@kernel.org |
||
|
Andrii Nakryiko
|
fa1c7d5cc4 |
bpf: Keep track of total log content size in both fixed and rolling modes
Change how we do accounting in BPF_LOG_FIXED mode and adopt log->end_pos as *logical* log position. This means that we can go beyond physical log buffer size now and be able to tell what log buffer size should be to fit entire log contents without -ENOSPC. To do this for BPF_LOG_FIXED mode, we need to remove a short-circuiting logic of not vsnprintf()'ing further log content once we filled up user-provided buffer, which is done by bpf_verifier_log_needed() checks. We modify these checks to always keep going if log->level is non-zero (i.e., log is requested), even if log->ubuf was NULL'ed out due to copying data to user-space, or if entire log buffer is physically full. We adopt bpf_verifier_vlog() routine to work correctly with log->ubuf == NULL condition, performing log formatting into temporary kernel buffer, doing all the necessary accounting, but just avoiding copying data out if buffer is full or NULL'ed out. With these changes, it's now possible to do this sort of determination of log contents size in both BPF_LOG_FIXED and default rolling log mode. We need to keep in mind bpf_vlog_reset(), though, which shrinks log contents after successful verification of a particular code path. This log reset means that log->end_pos isn't always increasing, so to return back to users what should be the log buffer size to fit all log content without causing -ENOSPC even in the presence of log resetting, we need to keep maximum over "lifetime" of logging. We do this accounting in bpf_vlog_update_len_max() helper. A related and subtle aspect is that with this logical log->end_pos even in BPF_LOG_FIXED mode we could temporary "overflow" buffer, but then reset it back with bpf_vlog_reset() to a position inside user-supplied log_buf. In such situation we still want to properly maintain terminating zero. We will eventually return -ENOSPC even if final log buffer is small (we detect this through log->len_max check). This behavior is simpler to reason about and is consistent with current behavior of verifier log. Handling of this required a small addition to bpf_vlog_reset() logic to avoid doing put_user() beyond physical log buffer dimensions. Another issue to keep in mind is that we limit log buffer size to 32-bit value and keep such log length as u32, but theoretically verifier could produce huge log stretching beyond 4GB. Instead of keeping (and later returning) 64-bit log length, we cap it at UINT_MAX. Current UAPI makes it impossible to specify log buffer size bigger than 4GB anyways, so we don't really loose anything here and keep everything consistently 32-bit in UAPI. This property will be utilized in next patch. Doing the same determination of maximum log buffer for rolling mode is trivial, as log->end_pos and log->start_pos are already logical positions, so there is nothing new there. These changes do incidentally fix one small issue with previous logging logic. Previously, if use provided log buffer of size N, and actual log output was exactly N-1 bytes + terminating \0, kernel logic coun't distinguish this condition from log truncation scenario which would end up with truncated log contents of N-1 bytes + terminating \0 as well. But now with log->end_pos being logical position that could go beyond actual log buffer size, we can distinguish these two conditions, which we do in this patch. This plays nicely with returning log_size_actual (implemented in UAPI in the next patch), as we can now guarantee that if user takes such log_size_actual and provides log buffer of that exact size, they will not get -ENOSPC in return. All in all, all these changes do conceptually unify fixed and rolling log modes much better, and allow a nice feature requested by users: knowing what should be the size of the buffer to avoid -ENOSPC. We'll plumb this through the UAPI and the code in the next patch. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-12-andrii@kernel.org |
||
|
Andrii Nakryiko
|
8a6ca6bc55 |
bpf: Simplify logging-related error conditions handling
Move log->level == 0 check into bpf_vlog_truncated() instead of doing it explicitly. Also remove unnecessary goto in kernel/bpf/verifier.c. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-11-andrii@kernel.org |
||
|
Andrii Nakryiko
|
cbedb42a0d |
bpf: Avoid incorrect -EFAULT error in BPF_LOG_KERNEL mode
If verifier log is in BPF_LOG_KERNEL mode, no log->ubuf is expected and it stays NULL throughout entire verification process. Don't erroneously return -EFAULT in such case. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-10-andrii@kernel.org |
||
|
Andrii Nakryiko
|
971fb5057d |
bpf: Fix missing -EFAULT return on user log buf error in btf_parse()
btf_parse() is missing -EFAULT error return if log->ubuf was NULL-ed out due to error while copying data into user-provided buffer. Add it, but handle a special case of BPF_LOG_KERNEL in which log->ubuf is always NULL. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-9-andrii@kernel.org |
||
|
Andrii Nakryiko
|
24bc80887a |
bpf: Ignore verifier log reset in BPF_LOG_KERNEL mode
Verifier log position reset is meaningless in BPF_LOG_KERNEL mode, so just exit early in bpf_vlog_reset() if log->level is BPF_LOG_KERNEL. This avoid meaningless put_user() into NULL log->ubuf. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-8-andrii@kernel.org |
||
|
Andrii Nakryiko
|
1216640938 |
bpf: Switch BPF verifier log to be a rotating log by default
Currently, if user-supplied log buffer to collect BPF verifier log turns out to be too small to contain full log, bpf() syscall returns -ENOSPC, fails BPF program verification/load, and preserves first N-1 bytes of the verifier log (where N is the size of user-supplied buffer). This is problematic in a bunch of common scenarios, especially when working with real-world BPF programs that tend to be pretty complex as far as verification goes and require big log buffers. Typically, it's when debugging tricky cases at log level 2 (verbose). Also, when BPF program is successfully validated, log level 2 is the only way to actually see verifier state progression and all the important details. Even with log level 1, it's possible to get -ENOSPC even if the final verifier log fits in log buffer, if there is a code path that's deep enough to fill up entire log, even if normally it would be reset later on (there is a logic to chop off successfully validated portions of BPF verifier log). In short, it's not always possible to pre-size log buffer. Also, what's worse, in practice, the end of the log most often is way more important than the beginning, but verifier stops emitting log as soon as initial log buffer is filled up. This patch switches BPF verifier log behavior to effectively behave as rotating log. That is, if user-supplied log buffer turns out to be too short, verifier will keep overwriting previously written log, effectively treating user's log buffer as a ring buffer. -ENOSPC is still going to be returned at the end, to notify user that log contents was truncated, but the important last N bytes of the log would be returned, which might be all that user really needs. This consistent -ENOSPC behavior, regardless of rotating or fixed log behavior, allows to prevent backwards compatibility breakage. The only user-visible change is which portion of verifier log user ends up seeing *if buffer is too small*. Given contents of verifier log itself is not an ABI, there is no breakage due to this behavior change. Specialized tools that rely on specific contents of verifier log in -ENOSPC scenario are expected to be easily adapted to accommodate old and new behaviors. Importantly, though, to preserve good user experience and not require every user-space application to adopt to this new behavior, before exiting to user-space verifier will rotate log (in place) to make it start at the very beginning of user buffer as a continuous zero-terminated string. The contents will be a chopped off N-1 last bytes of full verifier log, of course. Given beginning of log is sometimes important as well, we add BPF_LOG_FIXED (which equals 8) flag to force old behavior, which allows tools like veristat to request first part of verifier log, if necessary. BPF_LOG_FIXED flag is also a simple and straightforward way to check if BPF verifier supports rotating behavior. On the implementation side, conceptually, it's all simple. We maintain 64-bit logical start and end positions. If we need to truncate the log, start position will be adjusted accordingly to lag end position by N bytes. We then use those logical positions to calculate their matching actual positions in user buffer and handle wrap around the end of the buffer properly. Finally, right before returning from bpf_check(), we rotate user log buffer contents in-place as necessary, to make log contents contiguous. See comments in relevant functions for details. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-4-andrii@kernel.org |