IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 20429444e653ee8242dfbf815c0c37866beb371b ]
When using rtl8192cu with rtl8xxxu driver to connect wifi, there is a
probability of failure, which shows "authentication with ... timed out".
Through debugging, it was found that the RCR register has been inexplicably
modified to an incorrect value, resulting in the nic not being able to
receive authenticated frames.
To fix this problem, add regrcr in rtl8xxxu_priv struct, and store
the RCR value every time the register is written, and use it the next
time the register need to be modified.
Signed-off-by: Yun Lu <luyun@kylinos.cn>
Link: https://lore.kernel.org/all/20230427020512.1221062-1-luyun_611@163.com
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230512012055.2990472-1-luyun_611@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 280a8ab81733da8bc442253c700a52c4c0886ffd ]
If the device node of dvb_ca_en50221 is open() and the
device is disconnected, a UAF may occur when calling
close() on the device node.
The root cause is that wake_up() and wait_event() for
dvbdev->wait_queue are not implemented.
So implement wait_event() function in dvb_ca_en50221_release()
and add 'remove_mutex' which prevents race condition
for 'ca->exit'.
[mchehab: fix a checkpatch warning]
Link: https://lore.kernel.org/linux-media/20221121063308.GA33821@ubuntu
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8c75e4a1b325ea0a9433fa8834be97b5836b946 ]
Using a semaphore in the wait_event*() condition is no good idea.
It hits a kernel WARN_ON() at prepare_to_wait_event() like:
do not call blocking ops when !TASK_RUNNING; state=1 set at
prepare_to_wait_event+0x6d/0x690
For avoiding the potential deadlock, rewrite to an open-coded loop
instead. Unlike the loop in wait_event*(), this uses wait_woken()
after the condition check, hence the task state stays consistent.
CVE-2023-31084 was assigned to this bug.
Link: https://lore.kernel.org/r/CA+UBctCu7fXn4q41O_3=id1+OdyQ85tZY1x+TkT-6OVBL6KAUw@mail.gmail.com/
Link: https://lore.kernel.org/linux-media/20230512151800.1874-1-tiwai@suse.de
Reported-by: Yu Hao <yhao016@ucr.edu>
Closes: https://nvd.nist.gov/vuln/detail/CVE-2023-31084
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4172385b0c9ac366dcab78eda48c26814b87ed1a ]
A race condition may occur between the .disconnect function, which
is called when the device is disconnected, and the dvb_device_open()
function, which is called when the device node is open()ed.
This results in several types of UAFs.
The root cause of this is that you use the dvb_device_open() function,
which does not implement a conditional statement
that checks 'dvbnet->exit'.
So, add 'remove_mutex` to protect 'dvbnet->exit' and use
locked_dvb_net_open() function to check 'dvbnet->exit'.
[mchehab: fix a checkpatch warning]
Link: https://lore.kernel.org/linux-media/20221117045925.14297-3-imv4bel@gmail.com
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae11c0efaec32fb45130ee9886689f467232eebc ]
The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
This also fixes !CONFIG_OF error:
drivers/media/dvb-frontends/mn88443x.c:782:34: error: ‘mn88443x_of_match’ defined but not used [-Werror=unused-const-variable=]
Link: https://lore.kernel.org/linux-media/20230312131318.351173-28-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 517a281338322ff8293f988771c98aaa7205e457 ]
Since dvb_frontend_detach() is not called in ttusb_dec_exit_dvb(),
which is called when the device is disconnected, dvb_frontend_free()
is not finally called.
This causes a memory leak just by repeatedly plugging and
unplugging the device.
Fix this issue by adding dvb_frontend_detach() to ttusb_dec_exit_dvb().
Link: https://lore.kernel.org/linux-media/20221117045925.14297-5-imv4bel@gmail.com
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4315e5be7020aac9b24a8151caf4bb85224cd0e ]
The function of "dvb_ca_en50221_write_data" at source/drivers/media
/dvb-core/dvb_ca_en50221.c is used for two cases.
The first case is for writing APDU data in the function of
"dvb_ca_en50221_io_write" at source/drivers/media/dvb-core/
dvb_ca_en50221.c.
The second case is for writing the host link buf size on the
Command Register in the function of "dvb_ca_en50221_link_init"
at source/drivers/media/dvb-core/dvb_ca_en50221.c.
In the second case, there exists a bug like following.
In the function of the "dvb_ca_en50221_link_init",
after a TV host calculates the host link buf_size,
the TV host writes the calculated host link buf_size on the
Size Register.
Accroding to the en50221 Spec (the page 60 of
https://dvb.org/wp-content/uploads/2020/02/En50221.V1.pdf),
before this writing operation, the "SW(CMDREG_SW)" flag in the
Command Register should be set. We can see this setting operation
in the function of the "dvb_ca_en50221_link_init" like below.
...
if ((ret = ca->pub->write_cam_control(ca->pub, slot,
CTRLIF_COMMAND, IRQEN | CMDREG_SW)) != 0)
return ret;
...
But, after that, the real writing operation is implemented using
the function of the "dvb_ca_en50221_write_data" in the function of
"dvb_ca_en50221_link_init", and the "dvb_ca_en50221_write_data"
includes the function of "ca->pub->write_cam_control",
and the function of the "ca->pub->write_cam_control" in the
function of the "dvb_ca_en50221_wrte_data" does not include
"CMDREG_SW" flag like below.
...
if ((status = ca->pub->write_cam_control(ca->pub, slot,
CTRLIF_COMMAND, IRQEN | CMDREG_HC)) != 0)
...
In the above source code, we can see only the "IRQEN | CMDREG_HC",
but we cannot see the "CMDREG_SW".
The "CMDREG_SW" flag which was set in the function of the
"dvb_ca_en50221_link_init" was rollbacked by the follwoing function
of the "dvb_ca_en50221_write_data".
This is a bug. and this bug causes that the calculated host link buf_size
is not properly written in the CI module.
Through this patch, we fix this bug.
Link: https://lore.kernel.org/linux-media/20220818125027.1131-1-yongsuyoo0215@gmail.com
Signed-off-by: YongSu Yoo <yongsuyoo0215@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6ad6233592593079db5c8fa592c298e51bc1356 ]
IRQ handler netup_spi_interrupt() takes spinlock spi->lock. The lock
is initialized in netup_spi_init(). However, irq handler is registered
before initializing the lock.
Spinlock dma->lock and i2c->lock suffer from the same problem.
Fix this by registering the irq at the end of probe.
Link: https://lore.kernel.org/linux-media/20230315134518.1074497-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3fd1ef27aa686d871cefe207bd6168c4b0cd29e ]
In su3000_read_mac_address, if i2c_transfer fails to execute two
messages, array mac address will not be initialized. Without handling
such error, later in function dvb_usb_adapter_dvb_init, proposed_mac
is accessed before initialization.
Fix this error by returning a negative value if message execution fails.
Link: https://lore.kernel.org/linux-media/20230328124416.560889-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ded5bd2a49ce3015b7c936743eec0a0e6e11f0c ]
In digitv_i2c_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach digitv_i2c_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen. We add
check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Link: https://lore.kernel.org/linux-media/20230313095008.1039689-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa4a447b81b84f69c1a89ad899df157f386d7636 ]
In rtl28xxu_i2c_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach rtl28xxu_i2c_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Link: https://lore.kernel.org/linux-media/tencent_3623572106754AC2F266B316798B0F6CCA05@qq.com
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dff919090155fb22679869e8469168f270dcd97f ]
In ce6230_i2c_master_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach ce6230_i2c_master_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen. We add
check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Link: https://lore.kernel.org/linux-media/20230313092751.209496-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6dcefcc08eca1bf4e3d213c97c3cfb75f377935 ]
In ec168_i2c_xfer, msg is controlled by user. When msg[i].buf is null
and msg[i].len is zero, former checks on msg[i].buf would be passed.
If accessing msg[i].buf[0] without sanity check, null pointer deref
would happen. We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Link: https://lore.kernel.org/linux-media/20230313085853.3252349-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 858e97d7956d17a2cb56a9413468704a4d5abfe1 ]
In az6027_i2c_xfer, msg is controlled by user. When msg[i].buf is null,
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in
az6027_i2c_xfer()") fix the null-ptr-deref bug when msg[i].addr is 0x99.
However, null-ptr-deref also happens when msg[i].addr is 0xd0 and 0xc0.
We add check on msg[i].len to prevent null-ptr-deref.
Link: https://lore.kernel.org/linux-media/20230310165604.3093483-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7efb10d8dc70ea3000cc70dca53407c52488acd1 ]
In dvb_demux.c, some logics exist which compare the expected
continuity counter and the real continuity counter. If they
are not matched each other, both of the expected continuity
counter and the real continuity counter should be printed.
But there exists a bug that the expected continuity counter
is not correctly printed. The expected continuity counter is
replaced with the real countinuity counter + 1 so that
the epected continuity counter is not correclty printed.
This is wrong. This bug is fixed.
Link: https://lore.kernel.org/linux-media/20230305212519.499-1-yongsuyoo0215@gmail.com
Signed-off-by: YongSu Yoo <yongsuyoo0215@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f63550e2b165208a2f382afcaf5551df9569e1d4 ]
Apply a workaround for what appears to be a hardware quirk.
The problem seems to happen when enabling "whole chip power" (bit D7
register R6) for the very first time after the chip receives power. If
either "output" (D4) or "DAC" (D3) aren't powered on at that time,
playback becomes very distorted later on.
This happens on the Google Chameleon v3, as well as on a ZYBO Z7-10:
https://ez.analog.com/audio/f/q-a/543726/solved-ssm2603-right-output-offset-issue/480229
I suspect this happens only when using an external MCLK signal (which
is the case for both of these boards).
Here are some experiments run on a Google Chameleon v3. These were run
in userspace using a wrapper around the i2cset utility:
ssmset() {
i2cset -y 0 0x1a $(($1*2)) $2
}
For each of the following sequences, we apply power to the ssm2603
chip, set the configuration registers R0-R5 and R7-R8, run the selected
sequence, and check for distortions on playback.
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # chip, out, dac
OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x87 # out, dac
ssmset 0x06 0x07 # chip
OK
(disable MCLK)
ssmset 0x09 0x01 # core
ssmset 0x06 0x1f # chip
ssmset 0x06 0x07 # out, dac
(enable MCLK)
OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x1f # chip
ssmset 0x06 0x07 # out, dac
NOT OK
ssmset 0x06 0x1f # chip
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # out, dac
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x0f # chip, out
ssmset 0x06 0x07 # dac
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x17 # chip, dac
ssmset 0x06 0x07 # out
NOT OK
For each of the following sequences, we apply power to the ssm2603
chip, run the selected sequence, issue a reset with R15, configure
R0-R5 and R7-R8, run one of the NOT OK sequences from above, and check
for distortions.
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # chip, out, dac
OK
(disable MCLK)
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # chip, out, dac
(enable MCLK after reset)
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x17 # chip, dac
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x0f # chip, out
NOT OK
ssmset 0x06 0x07 # chip, out, dac
NOT OK
Signed-off-by: Paweł Anikiel <pan@semihalf.com
Link: https://lore.kernel.org/r/20230508113037.137627-8-pan@semihalf.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8680407b6f8f5fba59e8f1d63c869abc280f04df ]
This change ensures that if configured in the policy, the if_id set in
the policy and secpath states match during the inbound policy check.
Without this, there is potential for ambiguity where entries in the
secpath differing by only the if_id could be mismatched.
Notably, this is checked in the outbound direction when resolving
templates to SAs, but not on the inbound path when matching SAs and
policies.
Test: Tested against Android kernel unit tests & CTS
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab6ecfbf40fccf74b6ec2ba7ed6dd2fc024c3af2 ]
On slow CPU (FPGA/QEMU emulated) printing overrun messages from
interrupt handler to uart console may leads to more overrun errors.
So use dev_err_ratelimited to limit the number of error messages.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru
Link: https://lore.kernel.org/r/20230505062820.21840-1-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4913cfcf014c95f0437db2df1734472fd3e15098 ]
The debugfs_create_dir function returns ERR_PTR in case of error, and the
only correct way to check if an error occurred is 'IS_ERR' inline function.
This patch will replace the null-comparison with IS_ERR.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230512130533.98709-1-ivan.orlov0322@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0bdf1ad8d10bd4e50a8b1a2c53d15984165f7fea ]
Minor fix to reset the info field to NULL in case of error.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e10707d5865c90d3dfe4ef589ce02ff4287fef85 ]
When adding proper support for V4L2_FIELD_ALTERNATE it was missed that
this field format should trigger an interrupt for each field, not just
for the whole frame. Fix this by marking it as progressive in the
capture setup, which will then select the correct interrupt mode.
Tested on both Gen2 and Gen3 with the result of a doubling of the frame
rate for V4L2_FIELD_ALTERNATE. From a PAL video source the frame rate is
now 50, which is expected for alternate field capture.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa3eeb638de0c1a9d2d860e5b48259facdd65176 ]
When unwind instruction is 0xb2,the subsequent instructions
are uleb128 bytes.
For now,it uses only the first uleb128 byte in code.
For vsp increments of 0x204~0x400,use one uleb128 byte like below:
0xc06a00e4 <unwind_test_work>: 0x80b27fac
Compact model index: 0
0xb2 0x7f vsp = vsp + 1024
0xac pop {r4, r5, r6, r7, r8, r14}
For vsp increments larger than 0x400,use two uleb128 bytes like below:
0xc06a00e4 <unwind_test_work>: @0xc0cc9e0c
Compact model index: 1
0xb2 0x81 0x01 vsp = vsp + 1032
0xac pop {r4, r5, r6, r7, r8, r14}
The unwind works well since the decoded uleb128 byte is also 0x81.
For vsp increments larger than 0x600,use two uleb128 bytes like below:
0xc06a00e4 <unwind_test_work>: @0xc0cc9e0c
Compact model index: 1
0xb2 0x81 0x02 vsp = vsp + 1544
0xac pop {r4, r5, r6, r7, r8, r14}
In this case,the decoded uleb128 result is 0x101(vsp=0x204+(0x101<<2)).
While the uleb128 used in code is 0x81(vsp=0x204+(0x81<<2)).
The unwind aborts at this frame since it gets incorrect vsp.
To fix this,add uleb128 decode to cover all the above case.
Signed-off-by: Haibo Li <haibo.li@mediatek.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d1e952a2b8e5e92d8d55ac88a7cf7ca5ea591ad ]
If a user can make copy_from_user() fail, there is a potential for
UAF/DF due to a lack of locking around the allocation, use and freeing
of the data buffers.
This issue is not theoretical. I managed to author a POC for it:
BUG: KASAN: double-free in kfree+0x5c/0xac
Free of addr ffff29280be5de00 by task poc/356
CPU: 1 PID: 356 Comm: poc Not tainted 6.1.0-00001-g961aa6552c04-dirty #20
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace.part.0+0xe0/0xf0
show_stack+0x18/0x40
dump_stack_lvl+0x64/0x80
print_report+0x188/0x48c
kasan_report_invalid_free+0xa0/0xc0
____kasan_slab_free+0x174/0x1b0
__kasan_slab_free+0x18/0x24
__kmem_cache_free+0x130/0x2e0
kfree+0x5c/0xac
mbox_test_message_write+0x208/0x29c
full_proxy_write+0x90/0xf0
vfs_write+0x154/0x440
ksys_write+0xcc/0x180
__arm64_sys_write+0x44/0x60
invoke_syscall+0x60/0x190
el0_svc_common.constprop.0+0x7c/0x160
do_el0_svc+0x40/0xf0
el0_svc+0x2c/0x6c
el0t_64_sync_handler+0xf4/0x120
el0t_64_sync+0x18c/0x190
Allocated by task 356:
kasan_save_stack+0x3c/0x70
kasan_set_track+0x2c/0x40
kasan_save_alloc_info+0x24/0x34
__kasan_kmalloc+0xb8/0xc0
kmalloc_trace+0x58/0x70
mbox_test_message_write+0x6c/0x29c
full_proxy_write+0x90/0xf0
vfs_write+0x154/0x440
ksys_write+0xcc/0x180
__arm64_sys_write+0x44/0x60
invoke_syscall+0x60/0x190
el0_svc_common.constprop.0+0x7c/0x160
do_el0_svc+0x40/0xf0
el0_svc+0x2c/0x6c
el0t_64_sync_handler+0xf4/0x120
el0t_64_sync+0x18c/0x190
Freed by task 357:
kasan_save_stack+0x3c/0x70
kasan_set_track+0x2c/0x40
kasan_save_free_info+0x38/0x5c
____kasan_slab_free+0x13c/0x1b0
__kasan_slab_free+0x18/0x24
__kmem_cache_free+0x130/0x2e0
kfree+0x5c/0xac
mbox_test_message_write+0x208/0x29c
full_proxy_write+0x90/0xf0
vfs_write+0x154/0x440
ksys_write+0xcc/0x180
__arm64_sys_write+0x44/0x60
invoke_syscall+0x60/0x190
el0_svc_common.constprop.0+0x7c/0x160
do_el0_svc+0x40/0xf0
el0_svc+0x2c/0x6c
el0t_64_sync_handler+0xf4/0x120
el0t_64_sync+0x18c/0x190
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87b22656ca6a896d0378e9e60ffccb0c82f48b08 ]
Doing a 'cat /dev/watchdog0' with menz069_wdt as watchdog0 will result in
a NULL pointer dereference.
This happens because we're passing the wrong pointer to
watchdog_register_device(). Fix this by getting rid of the static
watchdog_device structure and use the one embedded into the driver's
per-instance private data.
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230418172531.177349-2-jth@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4d28e30a8d0b979e4029465ab8f312ab6ce2644 ]
marvell_nfc_setup_interface() uses the frequency retrieved from the
clock associated with the nand interface to determine the timings that
will be used. By changing the NAND frequency select without reflecting
this in the clock configuration this means that the timings calculated
don't correctly meet the requirements of the NAND chip. This hasn't been
an issue up to now because of a different bug that was stopping the
timings being updated after they were initially set.
Fixes: b25251414f6e ("mtd: rawnand: marvell: Stop implementing ->select_chip()")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230525003154.2303012-2-chris.packham@alliedtelesis.co.nz
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a6f4d346f3bad9c68b4a87701eb3f7978542d57 ]
When new timing values are calculated in marvell_nfc_setup_interface()
ensure that they will be applied in marvell_nfc_select_target() by
clearing the selected_chip pointer.
Fixes: b25251414f6e ("mtd: rawnand: marvell: Stop implementing ->select_chip()")
Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230525003154.2303012-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c27f3d53d588618d81d30d6712459a3cc9489b8 ]
A switch held in reset by default needs to wait longer until we can
reliably detect it.
An issue was observed when testing on the Marvell 88E6393X (Link Street).
The driver failed to detect the switch on some upstarts. Increasing the
wait time after reset deactivation solves this issue.
The updated wait time is now also the same as the wait time in the
mv88e6xxx_hardware_reset function.
Fixes: 7b75e49de424 ("net: dsa: mv88e6xxx: wait after reset deactivation")
Signed-off-by: Andreas Svensson <andreas.svensson@axis.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230530145223.1223993-1-andreas.svensson@axis.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d56304e5827c8cc8cc18c75343d283af7c4825c ]
If we send two TCA_FLOWER_KEY_ENC_OPTS_GENEVE packets and their total
size is 252 bytes(key->enc_opts.len = 252) then
key->enc_opts.len = opt->length = data_len / 4 = 0 when the third
TCA_FLOWER_KEY_ENC_OPTS_GENEVE packet enters fl_set_geneve_opt. This
bypasses the next bounds check and results in an out-of-bounds.
Fixes: 0a6e77784f49 ("net/sched: allow flower to match tunnel options")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Link: https://lore.kernel.org/r/20230531102805.27090-1-hbh25y@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 448a5ce1120c5bdbce1f1ccdabcd31c7d029f328 ]
Syzkaller got the following report:
BUG: KASAN: use-after-free in sk_setup_caps+0x621/0x690 net/core/sock.c:2018
Read of size 8 at addr ffff888027f82780 by task syz-executor276/3255
The function sk_setup_caps (called by ip6_sk_dst_store_flow->
ip6_dst_store) referenced already freed memory as this memory was
freed by parallel task in udpv6_sendmsg->ip6_sk_dst_lookup_flow->
sk_dst_check.
task1 (connect) task2 (udp6_sendmsg)
sk_setup_caps->sk_dst_set |
| sk_dst_check->
| sk_dst_set
| dst_release
sk_setup_caps references |
to already freed dst_entry|
The reason for this race condition is: sk_setup_caps() keeps using
the dst after transferring the ownership to the dst cache.
Found by Linux Verification Center (linuxtesting.org) with syzkaller.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Vladislav Efanov <VEfanov@ispras.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4e4534850a9d18c250a93f8d7fbb51310828110 ]
The current code for the length calculation wrongly truncates the reported
length of the groups array, causing an under report of the subscribed
groups. To fix this, use 'BITS_TO_BYTES()' which rounds up the
division by 8.
Fixes: b42be38b2778 ("netlink: add API to retrieve all group memberships")
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230529153335.389815-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd3e7cba16274831f5a69f071ed3cf13ffb352ea ]
There are users already and will be more of BITS_TO_BYTES() macro. Move
it to bitops.h for wider use.
In the case of ocfs2 the replacement is identical.
As for bnx2x, there are two places where floor version is used. In the
first case to calculate the amount of structures that can fit one memory
page. In this case obviously the ceiling variant is correct and
original code might have a potential bug, if amount of bits % 8 is not
0. In the second case the macro is used to calculate bytes transmitted
in one microsecond. This will work for all speeds which is multiply of
1Gbps without any change, for the rest new code will give ceiling value,
for instance 100Mbps will give 13 bytes, while old code gives 12 bytes
and the arithmetically correct one is 12.5 bytes. Further the value is
used to setup timer threshold which in any case has its own margins due
to certain resolution. I don't see here an issue with slightly shifting
thresholds for low speed connections, the card is supposed to utilize
highest available rate, which is usually 10Gbps.
Link: http://lkml.kernel.org/r/20200108121316.22411-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: f4e4534850a9 ("net/netlink: fix NETLINK_LIST_MEMBERSHIPS length report")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36eec020fab668719b541f34d97f44e232ffa165 ]
When use the following command to test:
1)ip link add bond0 type bond
2)ip link set bond0 up
3)tc qdisc add dev bond0 root handle ffff: mq
4)tc qdisc replace dev bond0 parent ffff:fff1 handle ffff: mq
The kernel reports NULL pointer dereference issue. The stack information
is as follows:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Internal error: Oops: 0000000096000006 [#1] SMP
Modules linked in:
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mq_attach+0x44/0xa0
lr : qdisc_graft+0x20c/0x5cc
sp : ffff80000e2236a0
x29: ffff80000e2236a0 x28: ffff0000c0e59d80 x27: ffff0000c0be19c0
x26: ffff0000cae3e800 x25: 0000000000000010 x24: 00000000fffffff1
x23: 0000000000000000 x22: ffff0000cae3e800 x21: ffff0000c9df4000
x20: ffff0000c9df4000 x19: 0000000000000000 x18: ffff80000a934000
x17: ffff8000f5b56000 x16: ffff80000bb08000 x15: 0000000000000000
x14: 0000000000000000 x13: 6b6b6b6b6b6b6b6b x12: 6b6b6b6b00000001
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff0000c0be0730 x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008
x5 : ffff0000cae3e864 x4 : 0000000000000000 x3 : 0000000000000001
x2 : 0000000000000001 x1 : ffff8000090bc23c x0 : 0000000000000000
Call trace:
mq_attach+0x44/0xa0
qdisc_graft+0x20c/0x5cc
tc_modify_qdisc+0x1c4/0x664
rtnetlink_rcv_msg+0x354/0x440
netlink_rcv_skb+0x64/0x144
rtnetlink_rcv+0x28/0x34
netlink_unicast+0x1e8/0x2a4
netlink_sendmsg+0x308/0x4a0
sock_sendmsg+0x64/0xac
____sys_sendmsg+0x29c/0x358
___sys_sendmsg+0x90/0xd0
__sys_sendmsg+0x7c/0xd0
__arm64_sys_sendmsg+0x2c/0x38
invoke_syscall+0x54/0x114
el0_svc_common.constprop.1+0x90/0x174
do_el0_svc+0x3c/0xb0
el0_svc+0x24/0xec
el0t_64_sync_handler+0x90/0xb4
el0t_64_sync+0x174/0x178
This is because when mq is added for the first time, qdiscs in mq is set
to NULL in mq_attach(). Therefore, when replacing mq after adding mq, we
need to initialize qdiscs in the mq before continuing to graft. Otherwise,
it will couse NULL pointer dereference issue in mq_attach(). And the same
issue will occur in the attach functions of mqprio, taprio and htb.
ffff:fff1 means that the repalce qdisc is ingress. Ingress does not allow
any qdisc to be attached. Therefore, ffff:fff1 is incorrectly used, and
the command should be dropped.
Fixes: 6ec1c69a8f64 ("net_sched: add classful multiqueue dummy scheduler")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Tested-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230527093747.3583502-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9de95df5d15baa956c2b70b9e794842e790a8a13 ]
Currently, after creating an ingress (or clsact) Qdisc and grafting it
under TC_H_INGRESS (TC_H_CLSACT), it is possible to graft it again under
e.g. a TBF Qdisc:
$ ip link add ifb0 type ifb
$ tc qdisc add dev ifb0 handle 1: root tbf rate 20kbit buffer 1600 limit 3000
$ tc qdisc add dev ifb0 clsact
$ tc qdisc link dev ifb0 handle ffff: parent 1:1
$ tc qdisc show dev ifb0
qdisc tbf 1: root refcnt 2 rate 20Kbit burst 1600b lat 560.0ms
qdisc clsact ffff: parent ffff:fff1 refcnt 2
^^^^^^^^
clsact's refcount has increased: it is now grafted under both
TC_H_CLSACT and 1:1.
ingress and clsact Qdiscs should only be used under TC_H_INGRESS
(TC_H_CLSACT). Prohibit regrafting them.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Fixes: 1f211a1b929c ("net, sched: add clsact qdisc")
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f85fa45d4a9408d98c46c8fa45ba2e3b2f4bf219 ]
Currently it is possible to add e.g. an HTB Qdisc under ffff:fff1
(TC_H_INGRESS, TC_H_CLSACT):
$ ip link add name ifb0 type ifb
$ tc qdisc add dev ifb0 parent ffff:fff1 htb
$ tc qdisc add dev ifb0 clsact
Error: Exclusivity flag on, cannot modify.
$ drgn
...
>>> ifb0 = netdev_get_by_name(prog, "ifb0")
>>> qdisc = ifb0.ingress_queue.qdisc_sleeping
>>> print(qdisc.ops.id.string_().decode())
htb
>>> qdisc.flags.value_() # TCQ_F_INGRESS
2
Only allow ingress and clsact Qdiscs under ffff:fff1. Return -EINVAL
for everything else. Make TCQ_F_INGRESS a static flag of ingress and
clsact Qdiscs.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Fixes: 1f211a1b929c ("net, sched: add clsact qdisc")
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5eeebfe6c493192b10d516abfd72742900f2a162 ]
clsact Qdiscs are only supposed to be created under TC_H_CLSACT (which
equals TC_H_INGRESS). Return -EOPNOTSUPP if 'parent' is not
TC_H_CLSACT.
Fixes: 1f211a1b929c ("net, sched: add clsact qdisc")
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7cfbd115001f94de9e4053657946a383147e803 ]
ingress Qdiscs are only supposed to be created under TC_H_INGRESS.
Return -EOPNOTSUPP if 'parent' is not TC_H_INGRESS, similar to
mq_init().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+b53a9c0d1ea4ad62da8b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/0000000000006cf87705f79acf1a@google.com/
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34dfde4ad87b84d21278a7e19d92b5b2c68e6c4d ]
This patch replaces the tp->mss_cache check in getting TCP_MAXSEG
with tp->rx_opt.user_mss check for CLOSE/LISTEN sock. Since
tp->mss_cache is initialized with TCP_MSS_DEFAULT, checking if
it's zero is probably a bug.
With this change, getting TCP_MAXSEG before connecting will return
default MSS normally, and return user_mss if user_mss is set.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Jack Yang <mingliang@linux.alibaba.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/netdev/CANn89i+3kL9pYtkxkwxwNMzvC_w3LNUum_2=3u+UyLBmGmifHA@mail.gmail.com/#t
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Link: https://lore.kernel.org/netdev/14D45862-36EA-4076-974C-EA67513C92F6@linux.alibaba.com/
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230527040317.68247-1-cambda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ffc57ea004234d9373c57b204fd10370a69f392 ]
A recent patch added READ_ONCE() in packet_bind() and packet_bind_spkt()
This is better handled by reading pkt_sk(sk)->num later
in packet_do_bind() while appropriate lock is held.
READ_ONCE() in writers are often an evidence of something being wrong.
Fixes: 822b5a1c17df ("af_packet: Fix data-races of pkt_sk(sk)->num.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230526154342.2533026-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 650a8884a364ff2568b51cde9009cfd43cdae6ad ]
A few functions provide an empty interface definition when
CONFIG_MTD_NAND_INGENIC_ECC is disabled, but they are accidentally
defined as global functions in the header:
drivers/mtd/nand/raw/ingenic/ingenic_ecc.h:39:5: error: no previous prototype for 'ingenic_ecc_calculate'
drivers/mtd/nand/raw/ingenic/ingenic_ecc.h:46:5: error: no previous prototype for 'ingenic_ecc_correct'
drivers/mtd/nand/raw/ingenic/ingenic_ecc.h:53:6: error: no previous prototype for 'ingenic_ecc_release'
drivers/mtd/nand/raw/ingenic/ingenic_ecc.h:57:21: error: no previous prototype for 'of_ingenic_ecc_get'
Turn them into 'static inline' definitions instead.
Fixes: 15de8c6efd0e ("mtd: rawnand: ingenic: Separate top-level and SoC specific code")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230516202133.559488-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc362e20cd6ab7a93d1b09669730c406f0910c35 ]
In the event of a change in XGBE mode, the current auto-negotiation
needs to be reset and the AN cycle needs to be re-triggerred. However,
the current code ignores the return value of xgbe_set_mode(), leading to
false information as the link is declared without checking the status
register.
Fix this by propagating the mode switch status information to
xgbe_phy_status().
Fixes: e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 822b5a1c17df7e338b9f05d1cfe5764e37c7f74f ]
syzkaller found a data race of pkt_sk(sk)->num.
The value is changed under lock_sock() and po->bind_lock, so we
need READ_ONCE() to access pkt_sk(sk)->num without these locks in
packet_bind_spkt(), packet_bind(), and sk_diag_fill().
Note that WRITE_ONCE() is already added by commit c7d2ef5dd4b0
("net/packet: annotate accesses to po->bind").
BUG: KCSAN: data-race in packet_bind / packet_do_bind
write (marked) to 0xffff88802ffd1cee of 2 bytes by task 7322 on cpu 0:
packet_do_bind+0x446/0x640 net/packet/af_packet.c:3236
packet_bind+0x99/0xe0 net/packet/af_packet.c:3321
__sys_bind+0x19b/0x1e0 net/socket.c:1803
__do_sys_bind net/socket.c:1814 [inline]
__se_sys_bind net/socket.c:1812 [inline]
__x64_sys_bind+0x40/0x50 net/socket.c:1812
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
read to 0xffff88802ffd1cee of 2 bytes by task 7318 on cpu 1:
packet_bind+0xbf/0xe0 net/packet/af_packet.c:3322
__sys_bind+0x19b/0x1e0 net/socket.c:1803
__do_sys_bind net/socket.c:1814 [inline]
__se_sys_bind net/socket.c:1812 [inline]
__x64_sys_bind+0x40/0x50 net/socket.c:1812
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
value changed: 0x0300 -> 0x0000
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 7318 Comm: syz-executor.4 Not tainted 6.3.0-13380-g7fddb5b5300c #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Fixes: 96ec6327144e ("packet: Diag core and basic socket info dumping")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230524232934.50950-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31642e7089df8fd3f54ca7843f7ee2952978cad1 ]
Simon Kapadia reported the following issue:
<quote>
The Online Amateur Radio Community (OARC) has recently been experimenting
with building a nationwide packet network in the UK.
As part of our experimentation, we have been testing out packet on 300bps HF,
and playing with net/rom. For HF packet at this baud rate you really need
to make sure that your MTU is relatively low; AX.25 suggests a PACLEN of 60,
and a net/rom PACLEN of 40 to go with that.
However the Linux net/rom support didn't work with a low PACLEN;
the mkiss module would truncate packets if you set the PACLEN below about 200 or so, e.g.:
Apr 19 14:00:51 radio kernel: [12985.747310] mkiss: ax1: truncating oversized transmit packet!
This didn't make any sense to me (if the packets are smaller why would they
be truncated?) so I started investigating.
I looked at the packets using ethereal, and found that many were just huge
compared to what I would expect.
A simple net/rom connection request packet had the request and then a bunch
of what appeared to be random data following it:
</quote>
Simon provided a patch that I slightly revised:
Not only we must not use skb_tailroom(), we also do
not want to count NR_NETWORK_LEN twice.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Co-Developed-by: Simon Kapadia <szymon@kapadia.pl>
Signed-off-by: Simon Kapadia <szymon@kapadia.pl>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Simon Kapadia <szymon@kapadia.pl>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230524141456.1045467-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 341a80de2468f481b1f771683709b5649cbfe513 ]
mlx5 driver needs to parse traces with event_id inside the range of
first_string_trace and num_string_trace. However, mlx5 is parsing all
events with event_id >= first_string_trace.
Fix it by checking for the correct range.
Fixes: c71ad41ccb0c ("net/mlx5: FW tracer, events handling")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1a5f2c887252dec161c1e12e04303ca9ba56fa9 ]
"_start" is used in several arches and proably should be reserved
for ARCH usage. Using it in a driver for a private symbol can cause
a build error when it conflicts with ARCH usage of the same symbol.
Therefore rename pl330's "_start" to "pl330_start_thread" so that there
is no conflict and no build error.
drivers/dma/pl330.c:1053:13: error: '_start' redeclared as different kind of symbol
1053 | static bool _start(struct pl330_thread *thrd)
| ^~~~~~
In file included from ../include/linux/interrupt.h:21,
from ../drivers/dma/pl330.c:18:
arch/riscv/include/asm/sections.h:11:13: note: previous declaration of '_start' with type 'char[]'
11 | extern char _start[];
| ^~~~~~
Fixes: b7d861d93945 ("DMA: PL330: Merge PL330 driver into drivers/dma/")
Fixes: ae43b3289186 ("ARM: 8202/1: dmaengine: pl330: Add runtime Power Management support v12")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jaswinder Singh <jassisinghbrar@gmail.com>
Cc: Boojin Kim <boojin.kim@samsung.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20230524045310.27923-1-rdunlap@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed8a2f4ddef2eaaf864ab1efbbca9788187036ab ]
On KVM GSI routing table updates, specially those where they have vIOMMUs
with interrupt remapping enabled (to boot >255vcpus setups without relying
on KVM_FEATURE_MSI_EXT_DEST_ID), a VMM may update the backing VF MSIs
with a new VCPU affinity.
On AMD with AVIC enabled, the new vcpu affinity info is updated via:
avic_pi_update_irte()
irq_set_vcpu_affinity()
amd_ir_set_vcpu_affinity()
amd_iommu_{de}activate_guest_mode()
Where the IRTE[GATag] is updated with the new vcpu affinity. The GATag
contains VM ID and VCPU ID, and is used by IOMMU hardware to signal KVM
(via GALog) when interrupt cannot be delivered due to vCPU is in
blocking state.
The issue is that amd_iommu_activate_guest_mode() will essentially
only change IRTE fields on transitions from non-guest-mode to guest-mode
and otherwise returns *with no changes to IRTE* on already configured
guest-mode interrupts. To the guest this means that the VF interrupts
remain affined to the first vCPU they were first configured, and guest
will be unable to issue VF interrupts and receive messages like this
from spurious interrupts (e.g. from waking the wrong vCPU in GALog):
[ 167.759472] __common_interrupt: 3.34 No irq handler for vector
[ 230.680927] mlx5_core 0000:00:02.0: mlx5_cmd_eq_recover:247:(pid
3122): Recovered 1 EQEs on cmd_eq
[ 230.681799] mlx5_core 0000:00:02.0:
wait_func_handle_exec_timeout:1113:(pid 3122): cmd[0]: CREATE_CQ(0x400)
recovered after timeout
[ 230.683266] __common_interrupt: 3.34 No irq handler for vector
Given the fact that amd_ir_set_vcpu_affinity() uses
amd_iommu_activate_guest_mode() underneath it essentially means that VCPU
affinity changes of IRTEs are nops. Fix it by dropping the check for
guest-mode at amd_iommu_activate_guest_mode(). Same thing is applicable to
amd_iommu_deactivate_guest_mode() although, even if the IRTE doesn't change
underlying DestID on the host, the VFIO IRQ handler will still be able to
poke at the right guest-vCPU.
Fixes: b9c6ff94e43a ("iommu/amd: Re-factor guest virtual APIC (de-)activation code")
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20230419201154.83880-2-joao.m.martins@oracle.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec014683c564fb74fc68e8f5e84691d3b3839d24 ]
Smatch complains that
drivers/iommu/rockchip-iommu.c:1306 rk_iommu_probe() warn: missing unwind goto?
The rk_iommu_probe function, after obtaining the irq value through
platform_get_irq, directly returns an error if the returned value
is negative, without releasing any resources.
Fix this by adding a new error handling label "err_pm_disable" and
use a goto statement to redirect to the error handling process. In
order to preserve the original semantics, set err to the value of irq.
Fixes: 1aa55ca9b14a ("iommu/rockchip: Move irq request past pm_runtime_enable")
Signed-off-by: Chao Wang <D202280639@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20230417030421.2777-1-D202280639@hust.edu.cn
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
