IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
SAS5116 controllers supports maximum 48 physical PHYs. Modify driver to
accommodate up to 64 PHYs (though current need is to support 48 PHYs).
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20231123160132.4155-4-sumit.saxena@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_prepare_utp_scsi_cmd_upiu() only uses the lowest eight bits of
lrbp->task_tag. Issue a runtime warning if this results in truncation.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20231115193359.2262044-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Calling scsi_eh_scmd_add() may cause the error handler never to be woken up
because this may result in shost->host_failed to become larger than
scsi_host_busy(shost). Hence complain if scsi_eh_scmd_add() is called after
SCMD_STATE_INFLIGHT has been cleared.
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20231115193343.2262013-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The UFS driver has two driver-specific fault injection mechanisms
(trigger_eh and timeout). Each fault injection configuration can only be
specified by a module parameter and cannot be reconfigured without
reloading the driver. Also, each configuration is common to all HBAs.
This change adds the following subdirectories for each UFS HBA when
debugfs is enabled:
/sys/kernel/debug/ufshcd/<HBA>/timeout_inject
/sys/kernel/debug/ufshcd/<HBA>/trigger_eh_inject
Each fault injection attribute can be dynamically set per HBA by a
corresponding file in these directories.
This is tested with QEMU UFS devices.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Link: https://lore.kernel.org/r/20231118124443.1007116-1-akinobu.mita@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Change the maintainer of MediaTek UFS hooks to Peter Wang.
The original maintainer, Stanley Chu, who could previously be reached at
stanley.chu@mediatek.com, has left MediaTek. Update the email address
accordingly and list Stanley as reviewer.
Cc: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Stanley Jhu <chu.stanley@gmail.com>
Link: https://lore.kernel.org/r/20231117103810.527-1-chu.stanley@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The mpt3sas_ctl_exit() should be called after communication with the
controller stops but currently it may cause false warnings about not
released memory. Fix this by letting mpt3sas_ctl_exit() handle misc driver
release per driver and release DMA in mpt3sas_ctl_release() per ioc.
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20231019153706.7967-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Having UFS power info available in sysfs makes it easier to tell the state
of the link during runtime considering we have a bunch of power saving
features and various combinations for backward compatibility.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1698890324-7374-1-git-send-email-quic_cang@quicinc.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 14.2.0.16
This patch set contains a user input range check correction, static
code analyzer fixes, refactoring of clean up code, and logging
enhancements.
The patches were cut against Martin's 6.7/scsi-queue tree.
Link: https://lore.kernel.org/r/20231031191224.150862-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Seo <james@equiv.tech> says:
Commit df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3") has
resulted in the only arrays that UBSAN_BOUNDS considers unbounded
being trailing arrays declared with [] as the last member of a
struct. Unbounded trailing arrays declared with [1] are common in
mpt3sas, which is causing spurious warnings to appear in some
situations, e.g. when more than one physical disk is connected:
UBSAN: array-index-out-of-bounds in drivers/scsi/mpt3sas/mpt3sas_scsih.c:6810:36
index 1 is out of range for type 'MPI2_SAS_IO_UNIT0_PHY_DATA [1]'
which relates to this unbounded array access:
port_id = sas_iounit_pg0->PhyData[i].Port;
and is just one example of 10 similar warnings currently occurring for
me during boot.
This series converts most trailing arrays declared with [1] in mptsas
into proper C99 flexible array members. Those that are not unbounded
and really are fixed-length arrays of length 1 are left alone.
I didn't find any conversions that required further source edits
besides changing [1] to [], and everything seems to work with my
SAS2008-based add-in card, but please look things over in case I
missed something subtle.
Rounding out the series are some opportunistic cleanups.
The only dependency is that patch 7 ("Use struct_size() for struct
size calculations") depends on patches 3-5.
Link: https://lore.kernel.org/r/20230806170604.16143-1-james@equiv.tech
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update copyrights to 2023 for files modified in the 14.2.0.16 patch set.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231031191224.150862-10-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Typically, debugging discovery issues requires the ndlp reference count,
nlp flags, transport flags, and the io tag for root cause analysis.
Modify important discovery log messages to include one or more of these
attributes to aid in debugging and support.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231031191224.150862-8-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A lot of repeated clean up code exists when freeing mailbox commands in
lpfc_mem_free_all().
Introduce a lpfc_mem_free_sli_mbox() helper routine to refactor the
copy-paste code. Additionally, reinitialize the mailbox command structure
context pointers to NULL in lpfc_sli4_mbox_cmd_free().
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231031191224.150862-7-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a check in lpfc_poll_eratt() when the driver is unloading. There is no
point to check for error attention events if the driver is rmmod'ed.
If the driver is reloaded, as part of insmod initialization, then a fresh
reset is always asserted to start clean and free of error attention events.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231031191224.150862-6-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In lpfc_check_nlp_post_devloss(), retaking of the ndlp lock in the if
statement is useless because the very next line unlocks. Simply return to
avoid relocking.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231031191224.150862-5-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Smatch called out a warning for null checking a ptr that is assigned by
list_entry(). list_entry() does not return null and, if the list is empty,
can return an invalid ptr. Thus, the !psrp check does not execute properly.
drivers/scsi/lpfc/lpfc_els.c:2133 lpfc_cmpl_els_plogi()
warn: list_entry() does not return NULL 'prsp'
Replace list_entry() with list_get_first(), which does a list_empty() check
before returning the first entry.
Fixes: a3c3c0a806f1 ("scsi: lpfc: Validate ELS LS_ACC completion payload")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-scsi/01b7568f-4ab4-4d56-bfa6-9ecc5fc261fe@moroto.mountain/
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231031191224.150862-4-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Because file_name and phba->ModelName are both declared a size 80 bytes,
the extra ".grp" file extension could cause an overflow into file_name.
Define a ELX_FW_NAME_SIZE macro with value 84. 84 incorporates the 4 extra
characters from ".grp". file_name is changed to be declared as a char and
initialized to zeros i.e. null chars.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231031191224.150862-3-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, the ras_fwlog_func sysfs parameter allows users to input a value
greater than three when selecting a PCI function to enable RAS fw logging
feature.
The user's input is sanity checked in lpfc_sli4_ras_init(), but allowing an
input greater than three doesn't make sense because the max number of ports
per HBA is four.
Change the allowable range from [0, 7] to [0, 3].
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231031191224.150862-2-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
strncpy() is deprecated for use on NUL-terminated destination strings [1]
and as such we should prefer more robust and less ambiguous string
interfaces.
We expect hba->chip_num to be NUL-terminated based on its usage with format
strings:
snprintf(fc_host_symbolic_name(lport->host), 256,
"%s (QLogic %s) v%s over %s",
BNX2FC_NAME, hba->chip_num, BNX2FC_VERSION,
interface->netdev->name);
Moreover, NUL-padding is not required as hba is zero-allocated from its
callsite:
hba = kzalloc(sizeof(*hba), GFP_KERNEL);
Considering the above, a suitable replacement is strscpy() [2] due to the
fact that it guarantees NUL-termination on the destination buffer without
unnecessarily NUL-padding.
Regarding stats_addr->version, I've opted to also use strscpy() instead of
strscpy_pad() as I typically see these XYZ_get_strings() pass
zero-allocated data. I couldn't track all of where bnx2fc_ulp_get_stats()
is used and if required, we could opt for strscpy_pad().
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20231023-strncpy-drivers-scsi-bnx2fc-bnx2fc_fcoe-c-v1-1-a3736943cde2@google.com
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
This pattern of strncpy(dest, src, strlen(src)) is extremely bug-prone.
This pattern basically never results in NUL-terminated destination
strings unless `dest` was zero-initialized. The current implementation
may be accidentally correct as tw_dev is zero-allocated via:
host = scsi_host_alloc(&driver_template, sizeof(TW_Device_Extension));
...
tw_dev = shost_priv(host);
... wherein scsi_host_alloc() zero-allocates host:
shost = kzalloc(sizeof(struct Scsi_Host) + privsize, GFP_KERNEL);
Also, further suggesting this change is worthwhile is another strscpy()
usage in 3w-9xxx.c:
strscpy(tw_dev->tw_compat_info.driver_version, TW_DRIVER_VERSION,
sizeof(tw_dev->tw_compat_info.driver_version));
Considering the above, a suitable replacement is strscpy() [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Let's not be accidentally correct, let's be definitely correct.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20231023-strncpy-drivers-scsi-3w-sas-c-v1-1-4c40a1e99dfc@google.com
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
mpt3sas_scsih.c:_scsih_scan_for_devices_after_reset() allocates and fetches
a MPI2_CONFIG_PAGE_RAID_VOL_0 struct (Mpi2RaidVolPage0_t) and a
MPI2_CONFIG_PAGE_RAID_VOL_1 struct (Mpi2RaidVolPage1_t), but does not
include the terminal flexible array members in the struct size
calculations, fetch those members, or otherwise use those members in any
way.
These dynamic allocations can be replaced with local variables.
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20230806170604.16143-13-james@equiv.tech
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
mpt3sas_base.c:_base_update_diag_trigger_pages() allocates and fetches a
MPI2_CONFIG_PAGE_SASIOUNIT_1 struct (Mpi2SasIOUnitPage_t), but does not
include the terminal flexible array member in the struct size calculation,
fetch that member, or otherwise use that member in any way.
This dynamic allocation can be replaced with a local variable.
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20230806170604.16143-12-james@equiv.tech
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Change "TIGGER" to "TRIGGER" in struct names and typedefs.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20230806170604.16143-11-james@equiv.tech
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
May reduce confusion for users of MPI2_CONFIG_PAGE_IO_UNIT_3::GPIOVal[].
Fixes: a1c4d7741323 ("scsi: mpt3sas: Replace unnecessary dynamic allocation with a static one")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20230806170604.16143-10-james@equiv.tech
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The per-adapter struct (struct MPT3SAS_ADAPTER) contains a
MPI2_CONFIG_PAGE_IO_UNIT_8 (Mpi2IOUnitPage8_t) iounit_pg8 member that is
populated by mpt3sas_base.c:_base_static_config_pages().
As the name of that function indicates, the iounit_pg8 member represents a
static configuration page data structure that rarely changes, and is among
several such static config pages that are currently being fetched once per
adapter per init (or reset) and copied to the per-adapter struct for later
use.
However, unlike the other static config pages, the iounit_pg8 member is
never actually used outside of _base_static_config_pages(). Also,
Mpi2IOUnitPage8_t has a flexible array member, making its presence in the
_middle_ of the per-adapter struct rather strange.
Remove this member from the per-adapter struct and fix up the portion of
_base_static_config_pages() that uses it.
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20230806170604.16143-9-james@equiv.tech
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After converting terminal variable arrays into flexible array members, use
the bounds-checking struct_size() helper when possible to avoid open-coded
arithmetic struct size calculations.
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20230806170604.16143-8-james@equiv.tech
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This terminal 1-length variable array can be directly converted into a C99
flexible array member.
As all users of MPI26_CONFIG_PAGE_PIOUNIT_1 (Mpi26PCIeIOUnitPage1_t) do not
use PhyData[], no further source changes are required to accommodate its
reduced sizeof():
- mpt3sas_config.c:mpt3sas_config_get_pcie_iounit_pg1() fetches a
Mpi26PCIeIOUnitPage1_t into a caller-provided buffer, and may fetch
and write PhyData[] into that buffer depending on its sz argument.
It has one caller:
- mpt3sas_base.c:_base_assign_fw_reported_qd() passes
sizeof(Mpi26PCIeIOUnitPage1_t) as sz, but does not use PhyData[].
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20230806170604.16143-7-james@equiv.tech
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This terminal 1-length variable array can be directly converted into a C99
flexible array member.
As all users of MPI2_CONFIG_PAGE_SASIOUNIT_1 (Mpi2SasIOUnitPage1_t) either
calculate its size without depending on its sizeof() or do not use
PhyData[], no further source changes are required:
- mpt3sas_config.c:mpt3sas_config_get_sas_iounit_pg1() fetches a
Mpi2SasIOUnitPage1_t into a caller-provided buffer, and may fetch and
write PhyData[] into that buffer depending on its sz argument. Its
callers:
- mpt3sas_base.c:_base_assign_fw_reported_qd() passes
sizeof(Mpi2SasIOUnitPage1_t) as sz, but does not use PhyData[].
- mpt3sas_base.c:mpt3sas_base_update_missing_delay(),
mpt3sas_scsih.c:_scsih_sas_host_add(),
mpt3sas_transport.c:_transport_phy_enable(), and
mpt3sas_transport.c:_transport_phy_speed() all calculate sz
independently of sizeof(Mpi2SasIOUnitPage1_t) and allocate a
suitable buffer before calling mpt3sas_config_get_sas_iounit_pg1()
and using PhyData[].
- mpt3sas_config.c:mpt3sas_config_set_sas_iounit_pg1() writes the contents
of a caller-provided buffer to the adapter, with the size of the write
depending on its sz argument. Its callers:
- mpt3sas_base.c:mpt3sas_base_update_missing_delay(),
mpt3sas_transport.c:_transport_phy_enable(), and
mpt3sas_transport.c:_transport_phy_speed() have all previously
called mpt3sas_config_get_sas_iounit_pg1() to obtain a
Mpi2SasIOUnitPage1_t, and are merely writing back this same
struct with the same previously calculated sz.
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20230806170604.16143-6-james@equiv.tech
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This terminal 1-length variable array can be directly converted into a C99
flexible array member.
As all users of MPI2_CONFIG_PAGE_SASIOUNIT_0 (Mpi2SasIOUnitPage0_t) either
calculate its size without depending on its sizeof() or do not use
PhyData[], no further source changes are required:
- mpt3sas_config.c:mpt3sas_config_get_number_hba_phys() fetches a
Mpi2SasIOUnitPage0_t for itself, but does not use PhyData[].
- mpt3sas_config.c:mpt3sas_config_get_sas_iounit_pg0() fetches a
Mpi2SasIOUnitPage0_t into a caller-provided buffer, and may fetch and
write PhyData[] into that buffer depending on its sz argument. Its
callers:
- mpt3sas_scsih.c:_scsih_update_vphys_after_reset(),
mpt3sas_scsih.c:_scsih_get_port_table_after_reset(),
mpt3sas_scsih.c:_scsih_sas_host_refresh(),
mpt3sas_scsih.c:_scsih_sas_host_add(), and
mpt3sas_transport.c:_transport_phy_enable() all calculate sz
independently of sizeof(Mpi2SasIOUnitPage0_t) and allocate a
suitable buffer before calling mpt3sas_config_get_sas_iounit_pg0()
and using PhyData[].
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20230806170604.16143-5-james@equiv.tech
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This terminal 1-length variable array can be directly converted into a C99
flexible array member.
As all users of MPI2_CONFIG_PAGE_RAID_VOL_0 (Mpi2RaidVolPage0_t) either
calculate its size without depending on its sizeof() or do not use
PhysDisk[], no further source changes are required:
- mpt3sas_config.c:mpt3sas_config_get_number_pds() fetches a
Mpi2RaidVolPage0_t for itself, but does not use PhysDisk[].
- mpt3sas_config.c:mpt3sas_config_get_raid_volume_pg0() fetches a
Mpi2RaidVolPage0_t into a caller-provided buffer, and may fetch and
write PhysDisk[] into that buffer depending on its sz argument. Its
callers:
- mpt3sas_scsih.c:scsih_get_resync(),
mpt3sas_scsih.c:scsih_get_state(),
mpt3sas_scsih.c:_scsih_search_responding_raid_devices(), and
mpt3sas_scsih.c:_scsih_scan_for_devices_after_reset() all pass
sizeof(Mpi2RaidVolPage0_t) as sz, but do not use PhysDisk[].
- mpt3sas_scsih.c:_scsih_get_volume_capabilities() and
mpt3sas_warpdrive.c:mpt3sas_init_warpdrive_properties()
both calculate sz independently of sizeof(Mpi2RaidVolPage0_t)
and allocate a suitable buffer before calling
mpt3sas_config_get_raid_volume_pg0() and using PhysDisk[].
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20230806170604.16143-4-james@equiv.tech
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This terminal 1-length variable array can be directly converted into a C99
flexible array member.
As all users of MPI2_CONFIG_PAGE_IO_UNIT_8 (Mpi2IOUnitPage8_t) do not use
Sensor[], no further source changes are required to accommodate its reduced
sizeof():
- mpt3sas_config.c:mpt3sas_config_get_iounit_pg8() fetches a
Mpi2IOUnitPage8_t into a caller-provided buffer, assuming
sizeof(Mpi2IOUnitPage8_t) as the buffer size. It has one caller:
- mpt3sas_base.c:_base_static_config_pages() passes the address of the
Mpi2IOUnitPage8_t iounit_pg8 member of the per-adapter struct (struct
MPT3SAS_ADAPTER *ioc) as the buffer. The assumed buffer size is
therefore correct.
However, the only subsequent use in mpt3sas of the thus populated
ioc->iounit_pg8 is a little further on in the same function, and this
use does not involve ioc->iounit_pg8.Sensor[].
Note that iounit_pg8 occurs in the middle of the per-adapter struct,
not at the end. The per-adapter struct is extensively used throughout
mpt3sas even if its iounit_pg8 member isn't, resulting in an
especially large amount of noise when comparing binary changes
attributable to this commit.
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20230806170604.16143-3-james@equiv.tech
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
These terminal 1-length variable arrays can be directly converted into C99
flexible array members without any binary changes.
In most cases, they belong to unused structs, or to structs used only by
unused code. The remaining few coincidentally have their sizes calculated
in roundabout ways that do not depend on the sizeof() their structs.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20230806170604.16143-2-james@equiv.tech
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The commands should be sorted inside the group definition.
Fix the ordering so we won't get following warning:
WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg))
Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/
Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/
Fixes: b6e3d1ba4fcf ("wifi: iwlwifi: mvm: implement new firmware API for statistics")
Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Tested-by: Damian Tometzki <damian@riscv-rocks.de>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Include upper 5 address bits of physical address in iitlbp
- Prevent booting 64-bit kernels on PA1.x machines
- parport-gsc: mark init function static
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZVB1AgAKCRD3ErUQojoP
Xy+GAP0TlgE7ExHBB4jBpGf6uFuP0broznCeclPD4Bd0gngVhQEAz5v5m0FkJVVI
5nOlKbBzLU4Mt9WYEbqNhmoNrklvYQo=
=T1IA
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- Include the upper 5 address bits when inserting TLB entries on a
64-bit kernel.
On physical machines those are ignored, but in qemu it's nice to have
them included and to be correct.
- Stop the 64-bit kernel and show a warning if someone tries to boot on
a machine with a 32-bit CPU
- Fix a "no previous prototype" warning in parport-gsc
* tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Prevent booting 64-bit kernels on PA1.x machines
parport: gsc: mark init function static
parisc/pgtable: Do not drop upper 5 address bits of physical address
1, Support PREEMPT_DYNAMIC with static keys;
2, Relax memory ordering for atomic operations;
3, Support BPF CPU v4 instructions for LoongArch;
4, Some build and runtime warning fixes.
-----BEGIN PGP SIGNATURE-----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=bmFe
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- support PREEMPT_DYNAMIC with static keys
- relax memory ordering for atomic operations
- support BPF CPU v4 instructions for LoongArch
- some build and runtime warning fixes
* tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
selftests/bpf: Enable cpu v4 tests for LoongArch
LoongArch: BPF: Support signed mod instructions
LoongArch: BPF: Support signed div instructions
LoongArch: BPF: Support 32-bit offset jmp instructions
LoongArch: BPF: Support unconditional bswap instructions
LoongArch: BPF: Support sign-extension mov instructions
LoongArch: BPF: Support sign-extension load instructions
LoongArch: Add more instruction opcodes and emit_* helpers
LoongArch/smp: Call rcutree_report_cpu_starting() earlier
LoongArch: Relax memory ordering for atomic operations
LoongArch: Mark __percpu functions as always inline
LoongArch: Disable module from accessing external data directly
LoongArch: Support PREEMPT_DYNAMIC with static keys
- Finish a refactor of pgprot_framebuffer() which dependend on some changes
that were merged via the drm tree.
- Fix some kernel-doc warnings to quieten the bots.
Thanks to: Nathan Lynch, Thomas Zimmermann.
-----BEGIN PGP SIGNATURE-----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=Qaeg
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Finish a refactor of pgprot_framebuffer() which dependend
on some changes that were merged via the drm tree
- Fix some kernel-doc warnings to quieten the bots
Thanks to Nathan Lynch and Thomas Zimmermann.
* tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc
powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc
powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code
powerpc: Remove file parameter from phys_mem_access_prot()
powerpc/machdep: Remove trailing whitespaces
-----BEGIN PGP SIGNATURE-----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=xjGh
-----END PGP SIGNATURE-----
Merge tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- ctime caching fix (for setxattr)
- encryption fix
- DNS resolver mount fix
- debugging improvements
- multichannel fixes including cases where server stops or starts
supporting multichannel after mount
- reconnect fix
- minor cleanups
* tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number for cifs.ko
cifs: handle when server stops supporting multichannel
cifs: handle when server starts supporting multichannel
Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO
smb3: allow dumping session and tcon id to improve stats analysis and debugging
smb: client: fix mount when dns_resolver key is not available
smb3: fix caching of ctime on setxattr
smb3: minor cleanup of session handling code
cifs: reconnect work should have reference on server struct
cifs: do not pass cifs_sb when trying to add channels
cifs: account for primary channel in the interface list
cifs: distribute channels across interfaces based on speed
cifs: handle cases where a channel is closed
smb3: more minor cleanups for session handling routines
smb3: minor RDMA cleanup
cifs: Fix encryption of cleared, but unset rq_iter data buffers
- Documentation update: Add a note about argument and return value
fetching is the best effort because it depends on the type.
- objpool: Fix to make internal global variables static in
test_objpool.c.
- kprobes: Unify kprobes_exceptions_nofify() prototypes. There are
the same prototypes in asm/kprobes.h for some architectures, but
some of them are missing the prototype and it causes a warning.
So move the prototype into linux/kprobes.h.
- tracing: Fix to check the tracepoint event and return event at
parsing stage. The tracepoint event doesn't support %return
but if $retval exists, it will be converted to %return silently.
This finds that case and rejects it.
- tracing: Fix the order of the descriptions about the parameters
of __kprobe_event_gen_cmd_start() to be consistent with the
argument list of the function.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmVOwAQbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bItMH/0F/vyiirgLrRVvQ+5Tr
Hm32oc1BQzxnQ0+9bjzk3r90KYk5cysBEEqxKzgxq9/RsJdyCczQUpxYehU0BoZT
1B4pB5eQ0DwcdGAVk4TyBRYVBb3uhCyyZNXv+F60AsO8i87fHHoJXT9SoKK+Vgx4
MAklE1gnxFFlRoYCBQpks89NajRx6n3aEL4/oXO3WYSrv+H2WGtZamB+RhpufkDx
Qx5TkIGnjulcW6J5m7Px5N3z9AX00SbfooZHAae3fqsek5RPNecfc1/WiANNXrSm
SYsG/i1jcHVvmk2YmCVokVLPKzhCOsKIuiW91rBu/Tu6lqiJmC+fxWxuZqAdXFUi
+kw=
=uymB
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Documentation update: Add a note about argument and return value
fetching is the best effort because it depends on the type.
- objpool: Fix to make internal global variables static in
test_objpool.c.
- kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the
same prototypes in asm/kprobes.h for some architectures, but some of
them are missing the prototype and it causes a warning. So move the
prototype into linux/kprobes.h.
- tracing: Fix to check the tracepoint event and return event at
parsing stage. The tracepoint event doesn't support %return but if
$retval exists, it will be converted to %return silently. This finds
that case and rejects it.
- tracing: Fix the order of the descriptions about the parameters of
__kprobe_event_gen_cmd_start() to be consistent with the argument
list of the function.
* tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Fix the order of argument descriptions
tracing: fprobe-event: Fix to check tracepoint event and return
kprobes: unify kprobes_exceptions_nofify() prototypes
lib: test_objpool: make global variables static
Documentation: tracing: Add a note about argument and retval access
