IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Allow user to configure the CCS mode setting through a
'ccs_mode' sysfs interface. Also report the current
CCS mode configuration and number of compute slices
available through this interface.
v2: Rebase, make it platform agnostic
v3: Separte out num_cslices sysfs interface and make
xe_gt_ccs_mode_sysfs_init() return void
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Disable dynamic HW load balancing of compute resource assignment
to engines and instead enabled fixed mode of mapping compute
resources to engines on all platforms with more than one compute
engine.
By default enable only one CCS engine with all compute slices
assigned to it. This is the desired configuration for common
workloads.
PVC platform supports only the fixed CCS mode (workaround 16016805146).
v2: Rebase, make it platform agnostic
v3: Minor code refactoring
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This workaround applies to graphics 20.04 on all engines.
Workaround has three parts :
1. Pipe flush before MI_ATOMIC - This part isn't relevant to Xe
(at least not right now) since we don't use MI_ATOMIC anywhere
in the kernel mode driver.
2. Memory-based interrupt masking - Memory-based interrupt processing
isn't supported on physical functions, only virtual functions,
according to bspec 60352. So this is probably only relevant once
SRIOV support lands in the driver.
3. Disabling CSB/timestamp updates to the ghwsp and pphwsp - Workaround
is added by this change.
The CSB reports to gHWSP and ppHWSP have been discussed as part
of a different topic on some internal threads and we've confirmed
that neither the KMD nor the GuC firmware use those for anything,
so disabling them is always "safe" and should have no functional
or performance impact on system operation. The same is true for
the timestamp updates in the ppHWSP as well. Given that, it might
make sense to just combine these two workarounds into a single
record (and single patch) and apply it on all steppings. Disabling
the reports for RCS on higher steppings doesn't have any kind of
negative impact and will simplify the overall situation.
V3(MattR):
- Combine WA apply same WA for all engines, no performance impact
V2(MattR):
- Mention detail in commit message
- Reorder bit define
- Improve bit naming
- Remove workaround part which isnt relevant
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This workaround applies to Graphics 20.04 as engine
workaround
V2(MattR):
- Reorder bit define
- Apply WA for RCS only
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
HuC authentication via GSC is performed by submitting the appropriate
PXP packet to the GSC FW. This packet can trigger a "pending" reply from
the FW, so we need to handle that and resubmit. Note that the auth via
GSC can only be performed if the HuC has already been authenticated by
the GuC.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Vivaik Balasubrawmanian <vivaik.balasubrawmanian@intel.com>
Reviewed-by: Vivaik Balasubrawmanian <vivaik.balasubrawmanian@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Starting on MTL, the HuC is authenticated twice, once via GuC (same as
with older integrated platforms) and once via GSC; the first
authentication allows the HuC to be used for clear-media workloads,
while the second one unlocks support for protected content.
Ahead of adding the authentication flow via GSC, this patch adds support
for differentiating the 2 auth steps and checking if they're complete.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Vivaik Balasubrawmanian <vivaik.balasubrawmanian@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently it's not possible to test the WAs for platforms using gmdid
since they don't have the IP information on the descriptor struct. In
order to allow that, add a stub function for read_gmdid() that is
activated when the test executes, replacing the iomap and read of the
real register.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231129232807.1499826-5-lucas.demarchi@intel.com
Link: https://lore.kernel.org/r/20231205133954.2089546-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Instead of passing as parameter to xe_pci_fake_device_init(), use
test->priv to pass parameters down the call stack. The main advantage is
that then the data is readily available on other functions by using
kunit_get_current_test().
This is a preparation to fix the initialization of fake devices when
they were supposed to be using GMD_ID.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231129232807.1499826-4-lucas.demarchi@intel.com
Link: https://lore.kernel.org/r/20231205133954.2089546-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Expand documentation and add an example to make clear this isn't about
generic masks in registers. Also, fix the doc regarding read operations:
the mask part has no effect on them.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231205155820.2133813-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
All the properties should be immutable and set upon exec_queue creation
using the existent extension. So, let's kill this useless and dangerous
uapi.
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
The vm_create ioctl function doesn't accept any extension.
Remove this left over.
A backward compatible change.
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Currently we're using "compute mode" for long running VMs using
preempt-fences for memory management, and "fault mode" for long
running VMs using page faults.
Change this to use the terminology "long-running" abbreviated as LR for
long-running VMs. These VMs can then either be in preempt-fence mode or
fault mode. The user can force fault mode at creation time, but otherwise
the driver can choose to use fault- or preempt-fence mode for long-running
vms depending on the device capabilities. Initially unless fault-mode is
specified, the driver uses preempt-fence mode.
v2:
- Fix commit message wording and the documentation around
CREATE_FLAG_LR_MODE and CREATE_FLAG_FAULT_MODE
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Although the exec ioctl is a very important one, it makes no sense
to explain xe_exec before explaining the exec_queue. So, let's
move this down to help bring a better flow on the documentation
and code readability.
It is important to highlight that this patch is changing all
the ioctl numbers in a non-backward compatible way. However, we
are doing this final uapi clean-up before we submit our first
pull-request to be part of the upstream Kernel. Once we get
there, no other change like this will ever happen and all the
backward compatibility will be respected.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Let's respect Documentation/process/botching-up-ioctls.rst
and add the proper padding for a 64b alignment with all as
well as all the required checks and settings for the pads
and the reserved entries.
v2: Fix remaining holes and double check with pahole (Jose)
Ensure with pahole that both 32b and 64b have exact same
layout (Thomas)
Do not set query's pad and reserved bits to zero since it
is redundant and already done by kzalloc (Matt)
v3: Fix alignment after rebase (José Roberto de Souza)
v4: Fix pad check (Francois Dugast)
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
As an information only. So Userspace can use this information
and be able to correlate different GTs.
Make API symmetric between Engine and GT info.
There's no need right now to include a tile_query entry
since there's no other information that we need from tile
that is not already exposed through different queries.
However, this could be added later if we have different Tile
information that could matter to userspace. But let's keep
the API ready for a direct reference to Tile ID based on
the GT entry.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
First of all, let's remove the duplication.
But also, let's rename it to remove the word 'frequency'
out of it. In general, the first thing people think of frequency
is the frequency in which the GTs are operating to execute the
GPU instructions.
While this frequency here is a crystal reference clock frequency
which is the base of everything else, and in this case of this
uAPI it is used to calculate a better and precise timestamp.
v2: (Suggested by Jose) Remove the engine_cs and keep the GT info one
since it might be useful for other SRIOV cases where the engine_cs
will be zeroed. So, grabbing from the GT_LIST should be cleaner.
v3: Keep comment on put_user() call (José Roberto de Souza)
Cc: Matt Roper <matthew.d.roper@intel.com>
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Jose Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
It is currently unused, so by the rules it cannot go upstream.
Also there was the desire to convert that to align with the
engine_class_instance selection, but the consensus on that one
is to remain with the global gt_id. So we are keeping the gt_id
there, not converting to a generic sched_group and also killing
this tile_mask and only using the default behavior of 0 that is
to create a mapping / page_table entry on every tile, similar
to what i915.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Let's continue on the uapi clean-up with more splits
with stuff into their own exclusive fields instead of
reusing stuff.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The uAPI provides queries which return arrays of elements. As of now
the format used in the struct is different depending on which element
is queried. Fix this for engines by applying the pattern below:
struct drm_xe_query_Xs {
__u32 num_Xs;
struct drm_xe_X Xs[];
...
}
Instead of directly returning an array of struct
drm_xe_query_engine_info, a new struct drm_xe_query_engines is
introduced. It contains itself an array of struct drm_xe_engine
which holds the information about each engine.
v2: Use plural for struct drm_xe_query_engines as multiple engines
are returned (José Roberto de Souza)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The uAPI provides queries which return arrays of elements. As of now
the format used in the struct is different depending on which element
is queried. However, aligning on the new common pattern:
struct drm_xe_query_Xs {
__u32 num_Xs;
struct drm_xe_X Xs[];
...
}
... would mean bringing back the name "gts" which is avoided per commit
fca54ba12470 ("drm/xe/uapi: Rename gts to gt_list") so make an exception
for gt and leave gt_list. Also, this change removes "query" in the
name of struct drm_xe_query_gt as it is not returned from the query
IOCTL. There is no functional change.
v2: Leave gt_list (Matt Roper)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The uAPI provides queries which return arrays of elements. As of now
the format used in the struct is different depending on which element
is queried. Fix this for memory regions by applying the pattern below:
struct drm_xe_query_Xs {
__u32 num_Xs;
struct drm_xe_X Xs[];
...
}
This removes "query" in the name of struct drm_xe_query_mem_region
as it is not returned from the query IOCTL. There is no functional
change.
v2: Only rename drm_xe_query_mem_region to drm_xe_mem_region
(José Roberto de Souza)
v3: Rename usage to mem_regions in xe_query.c (José Roberto de Souza)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For xe bo creation we request passing size which matches system or
vram minimum page alignment. This way we want to ensure userspace
is aware of region constraints and not aligned allocations will be
rejected returning EINVAL.
v2:
- Rebase, Update uAPI documentation. (Thomas)
v3:
- Adjust the dma-buf kunit test accordingly. (Thomas)
v4:
- Fixed rebase conflicts and updated commit message. (Francois)
Signed-off-by: Mauro Carvalho Chehab <mauro.chehab@linux.intel.com>
Signed-off-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We have at least 2 future features(OA and future media engines
capabilities) that will require Xe to provide more information about
engines to UMDs.
But this information should not just be added to
drm_xe_engine_class_instance for a couple of reasons:
- drm_xe_engine_class_instance is used as input to other structs/uAPIs
and those uAPIs don't care about any of these future new engine fields
- those new fields are useless information after initialization for
some UMDs, so it should not need to carry that around
So here my proposal is to make DRM_XE_DEVICE_QUERY_ENGINES return an
array of drm_xe_query_engine_info that contain
drm_xe_engine_class_instance and 3 u64s to be used for future features.
Reference OA:
https://patchwork.freedesktop.org/patch/558362/?series=121084&rev=6
v2: Reduce reserved[] to 3 u64 (Matthew Brost)
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo Rebased]
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Although the flags are about the creation, the memory placement
of the BO deserves a proper dedicated field in the uapi.
Besides getting more clear, it also allows to remove the
'magic' shifts from the flags that was a concern during the
uapi reviews.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The bind api is extensible but for a single bind op, there
is not a mechanism to extend. Add extensions field to
struct drm_xe_vm_bind_op.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Dominik Grzegorzek <dominik.grzegorzek@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
From the CI logs we want to easily know if the machine is capable and
allowed to enter d3cold, and can therefore potentially trigger the
d3cold RPM suspend and resume path.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Move params that are not used for initial "hwconfig" load to
"post-hwconfig" phase.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Earlier GuC load will require more fine-grained control over reset.
Extract it outside of xe_uc_init_hw.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The firmware loading for GuC is about to be moved, and will happen much
earlier in the probe process, when local-memory is not yet available.
While this has the potential to make the firmware loading process
slower, this is only happening during probe and full device reset.
Since both are not hot-paths - store all UC-like firmware in system
memory.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The function does a driver specific "request firmware" step that
includes validating the input, followed by wrapping the firmware binary
into a buffer object. Split it into smaller parts.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
A helper for managed BO allocations makes it possible to remove specific
"fini" actions and will simplify the following patches adding ability to
execute a release action for specific BO directly.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
GuC will need to be loaded earlier during probe. Having functional GGTT
is one of the prerequisites.
Also rename xe_ggtt_init_noalloc to xe_ggtt_init_early to match the new
call site.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
GuC will need to be loaded earlier during probe. And in order to load
GuC, being able to take the forcewake is going to be needed.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
GuC will need to be loaded earlier during probe. And in order to load
GuC, we will need the ability to create system memory allocations.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Now that MMIO init got moved to device early, we can use regular
xe_mmio_read helpers to get to GMD_ID register.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
SR-IOV VF doesn't have access to MMIO registers used to determine
graphics/media ID. It can however communicate with GuC.
Introduce xe_device_probe_early, which initializes enough HW to use
MMIO GuC communication.
This will allow both VF and PF/native driver to have unified probe
ordering.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Both MMIO registers and GGTT for root tile will need to be used earlier
during probe. Don't rely on tile count to compute the mapping size.
Further more, there's no need to remap after figuring out the real
resource size.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
It also merges the GT (which is part of tile) initialization happening
at xe_info_init with allocating other per-tile data structures into a
common helper function.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Parts of xe_info_init are only dealing with processing driver_data.
Extract it into xe_info_init_early to be able to use it earlier during
probe.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Workaround applies to Graphics 20.04 as part of ring
submission
V4(MattR):
- Rule for engine in oob WA not supported, add explicitly
V3(MattR):
- Pass hwe and rename API name to hint end of ring work
- Use existing RING_NOPID API
V2:
- Marking this WA for 20.04 instead of 20.00
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
SW is not expected to handle TRTT faults and should report these as
unsuccessful page fault in the reply, such that HW can respond by
raising a CAT error.
Signed-off-by: Brian Welty <brian.welty@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Update xe_migrate_prepare_vm() to use the usm batch buffer even for
servicing device page faults on integrated platforms. And as we have
no VRAM on integrated platforms, device pagefault handler should not
attempt to migrate into VRAM.
LNL is first integrated platform to support device pagefaults.
Signed-off-by: Brian Welty <brian.welty@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
MMIO is going to be setup earlier during probe. Move xe_mmio_probe_tiles
outside of MMIO setup.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20231129214509.1174116-6-michal.winiarski@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
MMIO is going to be setup earlier during probe. Move xe_set_dma_info
outside of MMIO setup.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20231129214509.1174116-5-michal.winiarski@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For devres managed devices, pci_alloc_irq_vectors is also managed (see
pci_setup_msi_context for reference).
PCI device used by Xe is devres managed (it was enabled with
pcim_enable_device), which means that calls to pci_free_irq_vectors are
redundant and can be safely removed.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231129214509.1174116-4-michal.winiarski@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Xe uses devres for most of its driver-lifetime resources, use it for pci
device as well.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231129214509.1174116-3-michal.winiarski@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
DRM device used by Xe is managed, which means that final ref will be
dropped on driver detach.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20231129214509.1174116-2-michal.winiarski@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
