IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit a50420c79731fc5cf27ad43719c1091e842a2606 upstream.
flush_cache_vmap() must be called after new vmalloc mappings are installed
in the page table in order to allow architectures to make sure the new
mapping is visible.
It could lead to a panic since on some architectures (like powerpc),
the page table walker could see the wrong pte value and trigger a
spurious page fault that can not be resolved (see commit f1cb8f9beba8
("powerpc/64s/radix: avoid ptesync after set_pte and
ptep_set_access_flags")).
But actually the patch is aiming at riscv: the riscv specification
allows the caching of invalid entries in the TLB, and since we recently
removed the vmalloc page fault handling, we now need to emit a tlb
shootdown whenever a new vmalloc mapping is emitted
(https://lore.kernel.org/linux-riscv/20230725132246.817726-1-alexghiti@rivosinc.com/).
That's a temporary solution, there are ways to avoid that :)
Link: https://lkml.kernel.org/r/20230809164633.1556126-1-alexghiti@rivosinc.com
Fixes: 3e9a9e256b1e ("mm: add a vmap_pfn function")
Reported-by: Dylan Jhong <dylan@andestech.com>
Closes: https://lore.kernel.org/linux-riscv/ZMytNY2J8iyjbPPy@atctrx.andestech.com/
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Dylan Jhong <dylan@andestech.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66fbfb35da47f391bdadf9fa7ceb88af4faa9022 upstream.
Problem can be reproduced by unloading snd_soc_simple_card, because in
devm_get_clk_from_child() devres data is allocated as `struct clk`, but
devm_clk_release() expects devres data to be `struct devm_clk_state`.
KASAN report:
==================================================================
BUG: KASAN: slab-out-of-bounds in devm_clk_release+0x20/0x54
Read of size 8 at addr ffffff800ee09688 by task (udev-worker)/287
Call trace:
dump_backtrace+0xe8/0x11c
show_stack+0x1c/0x30
dump_stack_lvl+0x60/0x78
print_report+0x150/0x450
kasan_report+0xa8/0xf0
__asan_load8+0x78/0xa0
devm_clk_release+0x20/0x54
release_nodes+0x84/0x120
devres_release_all+0x144/0x210
device_unbind_cleanup+0x1c/0xac
really_probe+0x2f0/0x5b0
__driver_probe_device+0xc0/0x1f0
driver_probe_device+0x68/0x120
__driver_attach+0x140/0x294
bus_for_each_dev+0xec/0x160
driver_attach+0x38/0x44
bus_add_driver+0x24c/0x300
driver_register+0xf0/0x210
__platform_driver_register+0x48/0x54
asoc_simple_card_init+0x24/0x1000 [snd_soc_simple_card]
do_one_initcall+0xac/0x340
do_init_module+0xd0/0x300
load_module+0x2ba4/0x3100
__do_sys_init_module+0x2c8/0x300
__arm64_sys_init_module+0x48/0x5c
invoke_syscall+0x64/0x190
el0_svc_common.constprop.0+0x124/0x154
do_el0_svc+0x44/0xdc
el0_svc+0x14/0x50
el0t_64_sync_handler+0xec/0x11c
el0t_64_sync+0x14c/0x150
Allocated by task 287:
kasan_save_stack+0x38/0x60
kasan_set_track+0x28/0x40
kasan_save_alloc_info+0x20/0x30
__kasan_kmalloc+0xac/0xb0
__kmalloc_node_track_caller+0x6c/0x1c4
__devres_alloc_node+0x44/0xb4
devm_get_clk_from_child+0x44/0xa0
asoc_simple_parse_clk+0x1b8/0x1dc [snd_soc_simple_card_utils]
simple_parse_node.isra.0+0x1ec/0x230 [snd_soc_simple_card]
simple_dai_link_of+0x1bc/0x334 [snd_soc_simple_card]
__simple_for_each_link+0x2ec/0x320 [snd_soc_simple_card]
asoc_simple_probe+0x468/0x4dc [snd_soc_simple_card]
platform_probe+0x90/0xf0
really_probe+0x118/0x5b0
__driver_probe_device+0xc0/0x1f0
driver_probe_device+0x68/0x120
__driver_attach+0x140/0x294
bus_for_each_dev+0xec/0x160
driver_attach+0x38/0x44
bus_add_driver+0x24c/0x300
driver_register+0xf0/0x210
__platform_driver_register+0x48/0x54
asoc_simple_card_init+0x24/0x1000 [snd_soc_simple_card]
do_one_initcall+0xac/0x340
do_init_module+0xd0/0x300
load_module+0x2ba4/0x3100
__do_sys_init_module+0x2c8/0x300
__arm64_sys_init_module+0x48/0x5c
invoke_syscall+0x64/0x190
el0_svc_common.constprop.0+0x124/0x154
do_el0_svc+0x44/0xdc
el0_svc+0x14/0x50
el0t_64_sync_handler+0xec/0x11c
el0t_64_sync+0x14c/0x150
The buggy address belongs to the object at ffffff800ee09600
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 136 bytes inside of
256-byte region [ffffff800ee09600, ffffff800ee09700)
The buggy address belongs to the physical page:
page:000000002d97303b refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4ee08
head:000000002d97303b order:1 compound_mapcount:0 compound_pincount:0
flags: 0x10200(slab|head|zone=0)
raw: 0000000000010200 0000000000000000 dead000000000122 ffffff8002c02480
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffff800ee09580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff800ee09600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffff800ee09680: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffffff800ee09700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff800ee09780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Fixes: abae8e57e49a ("clk: generalize devm_clk_get() a bit")
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://lore.kernel.org/r/20230805084847.3110586-1-andrej.skvortzov@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1cbc11aaa01f80577b67ae02c73ee781112125fd upstream.
Commmit f5ea16137a3f ("NFSv4: Retry LOCK on OLD_STATEID during delegation
return") attempted to solve this problem by using nfs4's generic async error
handling, but introduced a regression where v4.0 lock recovery would hang.
The additional complexity introduced by overloading that error handling is
not necessary for this case. This patch expects that commit to be
reverted.
The problem as originally explained in the above commit is:
There's a small window where a LOCK sent during a delegation return can
race with another OPEN on client, but the open stateid has not yet been
updated. In this case, the client doesn't handle the OLD_STATEID error
from the server and will lose this lock, emitting:
"NFS: nfs4_handle_delegation_recall_error: unhandled error -10024".
Fix this by using the old_stateid refresh helpers if the server replies
with OLD_STATEID.
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bfedba3b2c7793ce127680bc8f70711e05ec7a17 upstream.
When building for power4, newer binutils don't recognise the "dcbfl"
extended mnemonic.
dcbfl RA, RB is equivalent to dcbf RA, RB, 1.
Switch to "dcbf" to avoid the build error.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e74216b8def3803e98ae536de78733e9d7f3b109 ]
The commit 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode
bonds") aims to enable the use of macvlans on top of rlb bond mode. However,
the current rlb bond mode only handles ARP packets to update remote neighbor
entries. This causes an issue when a macvlan is on top of the bond, and
remote devices send packets to the macvlan using the bond's MAC address
as the destination. After delivering the packets to the macvlan, the macvlan
will rejects them as the MAC address is incorrect. Consequently, this commit
makes macvlan over bond non-functional.
To address this problem, one potential solution is to check for the presence
of a macvlan port on the bond device using netif_is_macvlan_port(bond->dev)
and return NULL in the rlb_arp_xmit() function. However, this approach
doesn't fully resolve the situation when a VLAN exists between the bond and
macvlan.
So let's just do a partial revert for commit 14af9963ba1e in rlb_arp_xmit().
As the comment said, Don't modify or load balance ARPs that do not originate
locally.
Fixes: 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds")
Reported-by: susan.zheng@veritas.com
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2117816
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b0fdcdc3a7d44aff907f0103f5ffb86b12bfe71 ]
No caller since v3.16.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: e74216b8def3 ("bonding: fix macvlan over alb bond support")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef2a7c9065cea4e3fbc0390e82d05141abbccd7f ]
When the interface does not exist, and a group is given, the given
parameters are being set to all interfaces of the given group. The given
IFNAME/ALT_IF_NAME are being ignored in that case.
That can be dangerous since a typo (or a deleted interface) can produce
weird side effects for caller:
Case 1:
IFLA_IFNAME=valid_interface
IFLA_GROUP=1
MTU=1234
Case 1 will update MTU and group of the given interface "valid_interface".
Case 2:
IFLA_IFNAME=doesnotexist
IFLA_GROUP=1
MTU=1234
Case 2 will update MTU of all interfaces in group 1. IFLA_IFNAME is
ignored in this case
This behaviour is not consistent and dangerous. In order to fix this issue,
we now return ENODEV when the given IFNAME does not exist.
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Signed-off-by: Brian Baboch <brian.baboch@wifirst.fr>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 30188bd7838c ("rtnetlink: Reject negative ifindexes in RTM_NEWLINK")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e1be4cdc98c989d5387ce94ff15b5ad06a5b681 ]
Several instances of pipapo_resize() don't propagate allocation failures,
this causes a crash when fault injection is enabled for gfp_kernel slabs.
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da71714e359b64bd7aab3bd56ec53f307f058133 ]
When replacing an existing root qdisc, with one that is of the same kind, the
request boils down to essentially a parameterization change i.e not one that
requires allocation and grafting of a new qdisc. syzbot was able to create a
scenario which resulted in a taprio qdisc replacing an existing taprio qdisc
with a combination of NLM_F_CREATE, NLM_F_REPLACE and NLM_F_EXCL leading to
create and graft scenario.
The fix ensures that only when the qdisc kinds are different that we should
allow a create and graft, otherwise it goes into the "change" codepath.
While at it, fix the code and comments to improve readability.
While syzbot was able to create the issue, it did not zone on the root cause.
Analysis from Vladimir Oltean <vladimir.oltean@nxp.com> helped narrow it down.
v1->V2 changes:
- remove "inline" function definition (Vladmir)
- remove extrenous braces in branches (Vladmir)
- change inline function names (Pedro)
- Run tdc tests (Victor)
v2->v3 changes:
- dont break else/if (Simon)
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+a3618a167af2021433cd@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/20230816225759.g25x76kmgzya2gei@skbuf/T/
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10083aef784031fa9f06c19a1b182e6fad5338d9 ]
The driver is misconfiguring the hardware for some values of MTU such that
it could use multiple descriptors to receive a packet when it could have
simply used one.
Change the driver to use a round-up instead of the result of a shift, as
the shift can truncate the lower bits of the size, and result in the
problem noted above. It also aligns this driver with similar code in i40e.
The insidiousness of this problem is that everything works with the wrong
size, it's just not working as well as it could, as some MTU sizes end up
using two or more descriptors, and there is no way to tell that is
happening without looking at ice_trace or a bus analyzer.
Fixes: efc2214b6047 ("ice: Add support for XDP")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f534f6581ec084fe94d6759f7672bd009794b07e ]
veth and vxcan need to make sure the ifindexes of the peer
are not negative, core does not validate this.
Using iproute2 with user-space-level checking removed:
Before:
# ./ip link add index 10 type veth peer index -1
# ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether 52:54:00:74:b2:03 brd ff:ff:ff:ff:ff:ff
10: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 8a:90:ff:57:6d:5d brd ff:ff:ff:ff:ff:ff
-1: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether ae:ed:18:e6:fa:7f brd ff:ff:ff:ff:ff:ff
Now:
$ ./ip link add index 10 type veth peer index -1
Error: ifindex can't be negative.
This problem surfaced in net-next because an explicit WARN()
was added, the root cause is older.
Fixes: e6f8f1a739b6 ("veth: Allow to create peer link with given ifindex")
Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)")
Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32bbe64a1386065ab2aef8ce8cae7c689d0add6e ]
The fixed_phy_register() function returns error pointers and never
returns NULL. Update the checks accordingly.
Fixes: b0ba512e25d7 ("net: bcmgenet: enable driver to work without a device tree")
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23a14488ea5882dea5851b65c9fce2127ee8fcad ]
The fixed_phy_register() function returns error pointers and never
returns NULL. Update the checks accordingly.
Fixes: c25b23b8a387 ("bgmac: register fixed PHY for ARM BCM470X / BCM5301X chipsets")
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 043d5f68d0ccdda91029b4b6dce7eeffdcfad281 ]
There are two network devices(veth1 and veth3) in ns1, and ipvlan1 with
L3S mode and ipvlan2 with L2 mode are created based on them as
figure (1). In this case, ipvlan_register_nf_hook() will be called to
register nf hook which is needed by ipvlans in L3S mode in ns1 and value
of ipvl_nf_hook_refcnt is set to 1.
(1)
ns1 ns2
------------ ------------
veth1--ipvlan1 (L3S)
veth3--ipvlan2 (L2)
(2)
ns1 ns2
------------ ------------
veth1--ipvlan1 (L3S)
ipvlan2 (L2) veth3
| |
|------->-------->--------->--------
migrate
When veth3 migrates from ns1 to ns2 as figure (2), veth3 will register in
ns2 and calls call_netdevice_notifiers with NETDEV_REGISTER event:
dev_change_net_namespace
call_netdevice_notifiers
ipvlan_device_event
ipvlan_migrate_l3s_hook
ipvlan_register_nf_hook(newnet) (I)
ipvlan_unregister_nf_hook(oldnet) (II)
In function ipvlan_migrate_l3s_hook(), ipvl_nf_hook_refcnt in ns1 is not 0
since veth1 with ipvlan1 still in ns1, (I) and (II) will be called to
register nf_hook in ns2 and unregister nf_hook in ns1. As a result,
ipvl_nf_hook_refcnt in ns1 is decreased incorrectly and this in ns2
is increased incorrectly. When the second net namespace is removed, a
reference count leak warning in ipvlan_ns_exit() will be triggered.
This patch add a check before ipvlan_migrate_l3s_hook() is called. The
warning can be triggered as follows:
$ ip netns add ns1
$ ip netns add ns2
$ ip netns exec ns1 ip link add veth1 type veth peer name veth2
$ ip netns exec ns1 ip link add veth3 type veth peer name veth4
$ ip netns exec ns1 ip link add ipv1 link veth1 type ipvlan mode l3s
$ ip netns exec ns1 ip link add ipv2 link veth3 type ipvlan mode l2
$ ip netns exec ns1 ip link set veth3 netns ns2
$ ip net del ns2
Fixes: 3133822f5ac1 ("ipvlan: use pernet operations and restrict l3s hooks to master netns")
Signed-off-by: Lu Wei <luwei32@huawei.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230817145449.141827-1-luwei32@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cba3f1786916063261e3e5ccbb803abc325b24ef ]
We changed tcp_poll() over time, bug never updated dccp.
Note that we also could remove dccp instead of maintaining it.
Fixes: 7c657876b63c ("[DCCP]: Initial implementation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230818015820.2701595-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76f33296d2e09f63118db78125c95ef56df438e9 ]
*prot->memory_pressure is read/writen locklessly, we need
to add proper annotations.
A recent commit added a new race, it is time to audit all accesses.
Fixes: 2d0c88e84e48 ("sock: Fix misuse of sk_under_memory_pressure()")
Fixes: 4d93df0abd50 ("[SCTP]: Rewrite of sctp buffer management code")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Abel Wu <wuyun.abel@bytedance.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20230818015132.2699348-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05f3d5bc23524bed6f043dfe6b44da687584f9fb ]
On SDP interfaces, frame oversize and undersize errors are
observed as driver is not considering packet sizes of all
subscribers of the link before updating the link config.
This patch fixes the same.
Fixes: 9b7dd87ac071 ("octeontx2-af: Support to modify min/max allowed packet lengths")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230817063006.10366-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eecb91b9f98d6427d4af5fdb8f108f52572a39e7 ]
Kmemleak report a leak in graph_trace_open():
unreferenced object 0xffff0040b95f4a00 (size 128):
comm "cat", pid 204981, jiffies 4301155872 (age 99771.964s)
hex dump (first 32 bytes):
e0 05 e7 b4 ab 7d 00 00 0b 00 01 00 00 00 00 00 .....}..........
f4 00 01 10 00 a0 ff ff 00 00 00 00 65 00 10 00 ............e...
backtrace:
[<000000005db27c8b>] kmem_cache_alloc_trace+0x348/0x5f0
[<000000007df90faa>] graph_trace_open+0xb0/0x344
[<00000000737524cd>] __tracing_open+0x450/0xb10
[<0000000098043327>] tracing_open+0x1a0/0x2a0
[<00000000291c3876>] do_dentry_open+0x3c0/0xdc0
[<000000004015bcd6>] vfs_open+0x98/0xd0
[<000000002b5f60c9>] do_open+0x520/0x8d0
[<00000000376c7820>] path_openat+0x1c0/0x3e0
[<00000000336a54b5>] do_filp_open+0x14c/0x324
[<000000002802df13>] do_sys_openat2+0x2c4/0x530
[<0000000094eea458>] __arm64_sys_openat+0x130/0x1c4
[<00000000a71d7881>] el0_svc_common.constprop.0+0xfc/0x394
[<00000000313647bf>] do_el0_svc+0xac/0xec
[<000000002ef1c651>] el0_svc+0x20/0x30
[<000000002fd4692a>] el0_sync_handler+0xb0/0xb4
[<000000000c309c35>] el0_sync+0x160/0x180
The root cause is descripted as follows:
__tracing_open() { // 1. File 'trace' is being opened;
...
*iter->trace = *tr->current_trace; // 2. Tracer 'function_graph' is
// currently set;
...
iter->trace->open(iter); // 3. Call graph_trace_open() here,
// and memory are allocated in it;
...
}
s_start() { // 4. The opened file is being read;
...
*iter->trace = *tr->current_trace; // 5. If tracer is switched to
// 'nop' or others, then memory
// in step 3 are leaked!!!
...
}
To fix it, in s_start(), close tracer before switching then reopen the
new tracer after switching. And some tracers like 'wakeup' may not update
'iter->private' in some cases when reopen, then it should be cleared
to avoid being mistakenly closed again.
Link: https://lore.kernel.org/linux-trace-kernel/20230817125539.1646321-1-zhengyejian1@huawei.com
Fixes: d7350c3f4569 ("tracing/core: make the read callbacks reentrants")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b71645d6af10196c46cbe3732de2ea7d36b3ff6d ]
Trace ring buffer can no longer record anything after executing
following commands at the shell prompt:
# cd /sys/kernel/tracing
# cat tracing_cpumask
fff
# echo 0 > tracing_cpumask
# echo 1 > snapshot
# echo fff > tracing_cpumask
# echo 1 > tracing_on
# echo "hello world" > trace_marker
-bash: echo: write error: Bad file descriptor
The root cause is that:
1. After `echo 0 > tracing_cpumask`, 'record_disabled' of cpu buffers
in 'tr->array_buffer.buffer' became 1 (see tracing_set_cpumask());
2. After `echo 1 > snapshot`, 'tr->array_buffer.buffer' is swapped
with 'tr->max_buffer.buffer', then the 'record_disabled' became 0
(see update_max_tr());
3. After `echo fff > tracing_cpumask`, the 'record_disabled' become -1;
Then array_buffer and max_buffer are both unavailable due to value of
'record_disabled' is not 0.
To fix it, enable or disable both array_buffer and max_buffer at the same
time in tracing_set_cpumask().
Link: https://lkml.kernel.org/r/20230805033816.3284594-2-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <vnagarnaik@google.com>
Cc: <shuah@kernel.org>
Fixes: 71babb2705e2 ("tracing: change CPU ring buffer state from tracing_cpumask")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d01e07fd1bfb4daae156ab528aa196f5ac2b2bc ]
Due to rbd_try_acquire_lock() effectively swallowing all but
EBLOCKLISTED error from rbd_try_lock() ("request lock anyway") and
rbd_request_lock() returning ETIMEDOUT error not only for an actual
notify timeout but also when the lock owner doesn't respond, a busy
loop inside of rbd_acquire_lock() between rbd_try_acquire_lock() and
rbd_request_lock() is possible.
Requesting the lock on EBUSY error (returned by get_lock_owner_info()
if an incompatible lock or invalid lock owner is detected) makes very
little sense. The same goes for ETIMEDOUT error (might pop up pretty
much anywhere if osd_request_timeout option is set) and many others.
Just fail I/O requests on rbd_dev->acquiring_list immediately on any
error from rbd_try_lock().
Cc: stable@vger.kernel.org # 588159009d5b: rbd: retrieve and check lock owner twice before blocklisting
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 588159009d5b7a09c3e5904cffddbe4a4e170301 ]
An attempt to acquire exclusive lock can race with the current lock
owner closing the image:
1. lock is held by client123, rbd_lock() returns -EBUSY
2. get_lock_owner_info() returns client123 instance details
3. client123 closes the image, lock is released
4. find_watcher() returns 0 as there is no matching watcher anymore
5. client123 instance gets erroneously blocklisted
Particularly impacted is mirror snapshot scheduler in snapshot-based
mirroring since it happens to open and close images a lot (images are
opened only for as long as it takes to take the next mirror snapshot,
the same client instance is used for all images).
To reduce the potential for erroneous blocklisting, retrieve the lock
owner again after find_watcher() returns 0. If it's still there, make
sure it matches the previously detected lock owner.
Cc: stable@vger.kernel.org # f38cb9d9c204: rbd: make get_lock_owner_info() return a single locker or NULL
Cc: stable@vger.kernel.org # 8ff2c64c9765: rbd: harden get_lock_owner_info() a bit
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f38cb9d9c2045dad16eead4a2e1aedfddd94603b ]
Make the "num_lockers can be only 0 or 1" assumption explicit and
simplify the API by getting rid of output parameters in preparation
for calling get_lock_owner_info() twice before blocklisting.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Stable-dep-of: 588159009d5b ("rbd: retrieve and check lock owner twice before blocklisting")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 313771e80fd253d4b5472e61a2d12b03c5293aa9 ]
For libceph, this ensures that libceph instance sharing (share option)
continues to work. For rbd, this avoids blocklisting alive lock owners
(locker addr is always LEGACY, while watcher addr is ANY in nautilus).
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Stable-dep-of: 588159009d5b ("rbd: retrieve and check lock owner twice before blocklisting")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a25cefc0920088bb9afafeb80ad3dcd84fe278b ]
[Why & How]
If there is no TG allocation we can dereference a NULL pointer when
checking if the TG is enabled.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2513ed4f937999c0446fd824f7564f76b697d722 ]
[Why]
When booting, the driver waits for the MPC idle bit to be set as part of
pipe initialization. However, on some systems this occurs before OTG is
enabled, and since the MPC idle bit won't be set until the vupdate
signal occurs (which requires OTG to be enabled), this never happens and
the wait times out. This can add hundreds of milliseconds to the boot
time.
[How]
Do not wait for mpc idle if tg is disabled
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 5a25cefc0920 ("drm/amd/display: check TG is non-null before checking if enabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd55842ed998a622ba6611fe59b3358c9f76773d ]
The PCM memory allocation helpers have a sanity check against too many
buffer allocations. However, the check is performed without a proper
lock and the allocation isn't serialized; this allows user to allocate
more memories than predefined max size.
Practically seen, this isn't really a big problem, as it's more or
less some "soft limit" as a sanity check, and it's not possible to
allocate unlimitedly. But it's still better to address this for more
consistent behavior.
The patch covers the size check in do_alloc_pages() with the
card->memory_mutex, and increases the allocated size there for
preventing the further overflow. When the actual allocation fails,
the size is decreased accordingly.
Reported-by: BassCheck <bass@buaa.edu.cn>
Reported-by: Tuo Li <islituo@gmail.com>
Link: https://lore.kernel.org/r/CADm8Tek6t0WedK+3Y6rbE5YEt19tML8BUL45N2ji4ZAz1KcN_A@mail.gmail.com
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230703112430.30634-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d50eb4725934fd22f5eeccb401000687c790fd0 ]
It was reported that dm-integrity runs out of vmalloc space on 32-bit
architectures. On x86, there is only 128MiB vmalloc space and dm-integrity
consumes it quickly because it has a 64MiB journal and 8MiB recalculate
buffer.
Fix this by reducing the size of the journal to 4MiB and the size of
the recalculate buffer to 1MiB, so that multiple dm-integrity devices
can be created and activated on 32-bit architectures.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2d22806aecb24e2de55c30a06e5d6eb297d161d ]
There is a potential OOB read at fast_imageblit, for
"colortab[(*src >> 4)]" can become a negative value due to
"const char *s = image->data, *src".
This change makes sure the index for colortab always positive
or zero.
Similar commit:
https://patchwork.kernel.org/patch/11746067
Potential bug report:
https://groups.google.com/g/syzkaller-bugs/c/9ubBXKeKXf4/m/k-QXy4UgAAAJ
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61bfcb6a3b981e8f19e044ac8c3de6edbe6caf70 ]
Commit 6f29e04938bf ("fbdev: Improve performance of sys_imageblit()")
broke sys_imageblit() for image width that are not aligned to 8-bit
boundaries. Fix this by handling the trailing pixels on each line
separately. The performance improvements in the original commit do not
regress by this change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 6f29e04938bf ("fbdev: Improve performance of sys_imageblit()")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220313192952.12058-2-tzimmermann@suse.de
Stable-dep-of: c2d22806aecb ("fbdev: fix potential OOB read in fast_imageblit()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f29e04938bf509fccfad490a74284cf158891ce ]
Improve the performance of sys_imageblit() by manually unrolling
the inner blitting loop and moving some invariants out. The compiler
failed to do this automatically. The resulting binary code was even
slower than the cfb_imageblit() helper, which uses the same algorithm,
but operates on I/O memory.
A microbenchmark measures the average number of CPU cycles
for sys_imageblit() after a stabilizing period of a few minutes
(i7-4790, FullHD, simpledrm, kernel with debugging). The value
for CFB is given as a reference.
sys_imageblit(), new: 25934 cycles
sys_imageblit(), old: 35944 cycles
cfb_imageblit(): 30566 cycles
In the optimized case, sys_imageblit() is now ~30% faster than before
and ~20% faster than cfb_imageblit().
v2:
* move switch out of inner loop (Gerd)
* remove test for alignment of dst1 (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223193804.18636-3-tzimmermann@suse.de
Stable-dep-of: c2d22806aecb ("fbdev: fix potential OOB read in fast_imageblit()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5487a7b60695a92cf998350e4beac17144c91fcd ]
Some CPU feature macros were using current_cpu_type to mark feature
availability.
However current_cpu_type will use smp_processor_id, which is prohibited
under preemptable context.
Since those features are all uniform on all CPUs in a SMP system, use
boot_cpu_type instead of current_cpu_type to fix preemptable kernel.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f641519409a73403ee6612b8648b95a688ab85c2 ]
cpu_has_octeon_cache was tied to 0 for generic cpu-features,
whith this generic kernel built for octeon CPU won't boot.
Just enable this flag by cpu_type. It won't hurt orther platforms
because compiler will eliminate the code path on other processors.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Stable-dep-of: 5487a7b60695 ("MIPS: cpu-features: Use boot_cpu_type for CPU type based features")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57e2c2f2d94cfd551af91cedfa1af6d972487197 ]
When a waiting plock request (F_SETLKW) is sent to userspace
for processing (dlm_controld), the result is returned at a
later time. That result could be incorrectly matched to a
different waiting request in cases where the owner field is
the same (e.g. different threads in a process.) This is fixed
by comparing all the properties in the request and reply.
The results for non-waiting plock requests are now matched
based on list order because the results are returned in the
same order they were sent.
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d413ae9ced4180c0e2114553c3a7560b509b0f8 ]
This patch refactors do_unlock_close() by using only struct dlm_plock_info
as a parameter.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Stable-dep-of: 57e2c2f2d94c ("fs: dlm: fix mismatch of plock results from userspace")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea06d4cabf529eefbe7e89e3a8325f1f89355ccd ]
This patch reverses the commit bcfad4265ced ("dlm: improve plock logging
if interrupted") by moving it to debug level and notifying the user an op
was removed.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Stable-dep-of: 57e2c2f2d94c ("fs: dlm: fix mismatch of plock results from userspace")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19d7ca051d303622c423b4cb39e6bde5d177328b ]
This patch adds the pid information which requested the lock operation
to the debug log output.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Stable-dep-of: 57e2c2f2d94c ("fs: dlm: fix mismatch of plock results from userspace")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc1acd5c94699389a9ed023e94dd860c846ea1f6 ]
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean [1].
This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Stable-dep-of: 57e2c2f2d94c ("fs: dlm: fix mismatch of plock results from userspace")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcfad4265cedf3adcac355e994ef9771b78407bd ]
This patch changes the log level if a plock is removed when interrupted
from debug to info. Additional it signals now that the plock entity was
removed to let the user know what's happening.
If on a dev_write() a pending plock cannot be find it will signal that
it might have been removed because wait interruption.
Before this patch there might be a "dev_write no op ..." info message
and the users can only guess that the plock was removed before because
the wait interruption. To be sure that is the case we log both messages
on the same log level.
Let both message be logged on info layer because it should not happened
a lot and if it happens it should be clear why the op was not found.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Stable-dep-of: 57e2c2f2d94c ("fs: dlm: fix mismatch of plock results from userspace")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40613da52b13fb21c5566f10b287e0ca8c12c4e9 ]
When using ACPI PCI hotplug, hotplugging a device with large BARs may fail
if bridge windows programmed by firmware are not large enough.
Reproducer:
$ qemu-kvm -monitor stdio -M q35 -m 4G \
-global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=on \
-device id=rp1,pcie-root-port,bus=pcie.0,chassis=4 \
disk_image
wait till linux guest boots, then hotplug device:
(qemu) device_add qxl,bus=rp1
hotplug on guest side fails with:
pci 0000:01:00.0: [1b36:0100] type 00 class 0x038000
pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x03ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0x00000000-0x03ffffff]
pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00001fff]
pci 0000:01:00.0: reg 0x1c: [io 0x0000-0x001f]
pci 0000:01:00.0: BAR 0: no space for [mem size 0x04000000]
pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x04000000]
pci 0000:01:00.0: BAR 1: no space for [mem size 0x04000000]
pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x04000000]
pci 0000:01:00.0: BAR 2: assigned [mem 0xfe800000-0xfe801fff]
pci 0000:01:00.0: BAR 3: assigned [io 0x1000-0x101f]
qxl 0000:01:00.0: enabling device (0000 -> 0003)
Unable to create vram_mapping
qxl: probe of 0000:01:00.0 failed with error -12
However when using native PCIe hotplug
'-global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off'
it works fine, since kernel attempts to reassign unused resources.
Use the same machinery as native PCIe hotplug to (re)assign resources.
Link: https://lore.kernel.org/r/20230424191557.2464760-1-imammedo@redhat.com
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 895cedc1791916e8a98864f12b656702fad0bb67 ]
On server-initiated disconnect, rpcrdma_xprt_disconnect() was DMA-
unmapping the Receive buffers, but rpcrdma_post_recvs() neglected
to remap them after a new connection had been established. The
result was immediate failure of the new connection with the Receives
flushing with LOCAL_PROT_ERR.
Fixes: 671c450b6fe0 ("xprtrdma: Fix oops in Receive handler after device removal")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4e89f1a6dab4c063fc1e823cc9dddc408ff40cf ]
Another highly rare error case when a page allocating loop (inside
__nfs4_get_acl_uncached, this time) is not properly unwound on error.
Since pages array is allocated being uninitialized, need to free only
lower array indices. NULL checks were useful before commit 62a1573fcf84
("NFSv4 fix acl retrieval over krb5i/krb5p mounts") when the array had
been initialized to zero on stack.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 62a1573fcf84 ("NFSv4 fix acl retrieval over krb5i/krb5p mounts")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4ae68b26c3ab5a82aa271e6e9fc9b1a06e1d6b40 upstream.
Objtool --rethunk does two things:
- it collects all (tail) call's of __x86_return_thunk and places them
into .return_sites. These are typically compiler generated, but
RET also emits this same.
- it fudges the validation of the __x86_return_thunk symbol; because
this symbol is inside another instruction, it can't actually find
the instruction pointed to by the symbol offset and gets upset.
Because these two things pertained to the same symbol, there was no
pressing need to separate these two separate things.
However, alas, along comes SRSO and more crazy things to deal with
appeared.
The SRSO patch itself added the following symbol names to identify as
rethunk:
'srso_untrain_ret', 'srso_safe_ret' and '__ret'
Where '__ret' is the old retbleed return thunk, 'srso_safe_ret' is a
new similarly embedded return thunk, and 'srso_untrain_ret' is
completely unrelated to anything the above does (and was only included
because of that INT3 vs UD2 issue fixed previous).
Clear things up by adding a second category for the embedded instruction
thing.
Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814121148.704502245@infradead.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dbf46008775516f7f25c95b7760041c286299783 upstream.
For stack-validation of a frame-pointer build, objtool validates that
every CALL instruction is preceded by a frame-setup. The new SRSO
return thunks violate this with their RSB stuffing trickery.
Extend the __fentry__ exception to also cover the embedded_insn case
used for this. This cures:
vmlinux.o: warning: objtool: srso_untrain_ret+0xd: call without frame pointer save/setup
Fixes: 4ae68b26c3ab ("objtool/x86: Fix SRSO mess")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20230816115921.GH980931@hirez.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 79cd2a11224eab86d6673fe8a11d2046ae9d2757 upstream.
The linker script arch/x86/kernel/vmlinux.lds.S matches the thunk
sections ".text.__x86.*" from arch/x86/lib/retpoline.S as follows:
.text {
[...]
TEXT_TEXT
[...]
__indirect_thunk_start = .;
*(.text.__x86.*)
__indirect_thunk_end = .;
[...]
}
Macro TEXT_TEXT references TEXT_MAIN which normally expands to only
".text". However, with CONFIG_LTO_CLANG, TEXT_MAIN becomes
".text .text.[0-9a-zA-Z_]*" which wrongly matches also the thunk
sections. The output layout is then different than expected. For
instance, the currently defined range [__indirect_thunk_start,
__indirect_thunk_end] becomes empty.
Prevent the problem by using ".." as the first separator, for example,
".text..__x86.indirect_thunk". This pattern is utilized by other
explicit section names which start with one of the standard prefixes,
such as ".text" or ".data", and that need to be individually selected in
the linker script.
[ nathan: Fix conflicts with SRSO and fold in fix issue brought up by
Andrew Cooper in post-review:
https://lore.kernel.org/20230803230323.1478869-1-andrew.cooper3@citrix.com ]
Fixes: dc5723b02e52 ("kbuild: add support for Clang LTO")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230711091952.27944-2-petr.pavlu@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e9fbc47b818b964ddff5df5b2d5c0f5f32f4a147 upstream.
Skip the srso cmd line parsing which is not needed on Zen1/2 with SMT
disabled and with the proper microcode applied (latter should be the
case anyway) as those are not affected.
Fixes: 5a15d8348881 ("x86/srso: Tie SBPB bit setting to microcode patch detection")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230813104517.3346-1-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
