IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When diag204 busy-indiciation facility is installed and diag204 is
returning busy, hypfs diag204 handler now does an interruptable busy
wait until diag204 is no longer busy. If there is a signal pending, call
would be restarted with -ERESTARTSYSCALL, except for fatal signals.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Tobias Huschle <huschle@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
To verify if busy indication facility is installed or not sclp bits has
to be checked. Add a function that checks sclp to improve readability.
Add busy-indication-request bit mask for diag204 subcodes.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Tobias Huschle <huschle@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When diag204-busy-indication facility is installed, diag204 can return
'8' which means device is busy and no operation is done. Add check for
return codes of diag204 call. Return error codes according to diag204
return codes.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Tobias Huschle <huschle@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Return different errno's from diag204 to allow users to handle them
accordingly. Instead of returning -1 regardless of the failing
condition, return -EINVAL on invalid memory address and -EOPNOTSUPP when
diag instruction fails.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Tobias Huschle <huschle@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
With gcc 14.1.0 support for flag output constraint was added for
s390. Use this for __atomic_cmpxchg_bool(). This allows for slightly
better code, since the compiler can generate code depending on the
condition code which is the result of an inline assembly.
The size of the kernel image is reduced by ~12kb.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use mvhi/mvghi for small constant values within the __atomic_set()
inline assemblies. This avoids loading the specified value into a
register.
The size of the kernel image is reduced by ~1.2kb.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Instead of setting up non-boot CPUs early in architecture code,
only setup the cpu present mask and let the generic code handle
cpu bringup.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Describe that some HWCAP bits are reserved to avoid that they will be
used by accident.
Suggested-by: Stefan Liebler <stli@linux.ibm.com>
Reviewed-by: Stefan Liebler <stli@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Make the crdte() and cspg() wrappers return a boolean to indicate
success, like the other already existing "compare and swap" type of
wrappers.
Add documentation for those functions as well.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
s390 generates KOBJ_CHANGE uevents on CPUs whenever a topology update
occurs. These uevents currently have no users and they are also not
present on other architectures. As they are not necessary, remove
these extra uevents.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Due to a bug in some firmware versions, Store Data requests might not
get an event response in certain situations. As a result, the boot
process will be blocked indefinitely.
Fix this by introducing timeout handling for Store Data requests. In
case a timeout occurs, the Store Data operation is halted and no data
is retrieved from the SCLP facility.
Note: A minority of installed systems rely on Store Data result for
device auto-configuration. These systems will fail to boot in case of a
Store Data timeout and will need to be switched to manual device
configuration as workaround.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
When a task waiting for completion of a Store Data operation is
interrupted, an attempt is made to halt this operation. If this attempt
fails due to a hardware or firmware problem, there is a chance that the
SCLP facility might store data into buffers referenced by the original
operation at a later time.
Handle this situation by not releasing the referenced data buffers if
the halt attempt fails. For current use cases, this might result in a
leak of few pages of memory in case of a rare hardware/firmware
malfunction.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
On systems that do not support Store Data events (such as when running
as KVM guest) the following warning message appears during boot:
sclp_sd: Store Data request failed (eq=2, di=3, response=0x40f0,
flags=0x00, status=0, rc=-5)
This warning does not add any useful information since the result is
expected due to missing support for that event type.
Suppress this message by checking the associated masks of supported
events before issuing a Store Data event.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
With ARCH=s390, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/char/raw3270.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/char/con3270.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/char/fs3270.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240615-md-s390-drivers-s390-char-v1-1-d1cd23ff6476@quicinc.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
With ARCH=s390, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/block/dcssblk.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240615-md-s390-drivers-s390-block-dcssblk-v1-1-d9d19703abcb@quicinc.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
With ARCH=s390, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/s390/mm/cmm.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240615-md-s390-arch-s390-mm-v1-1-a360eed8c7c3@quicinc.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
With ARCH=s390, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/s390/lib/test_kprobes_s390.o
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/s390/lib/test_unwind.o
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/s390/lib/test_modules.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240615-md-s390-arch-s390-lib-v1-1-d7424b943973@quicinc.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
With ARCH=s390, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/s390/crypto/crc32-vx_s390.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240615-md-s390-arch-s390-crypto-v1-1-7120d406e7c7@quicinc.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
On s390, zero page's size relies on total ram pages.
Since we plan to move the accounting into __free_pages_core(),
totalram_pages may not represent the total usable pages on system
at this point when defer_init is enabled.
We can get the total usable pages from memblock directly. The size maybe
not accurate due to the alignment, but enough for the calculation.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Mike Rapoport (IBM) <rppt@kernel.org>
CC: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20240616013537.20338-1-richard.weiyang@gmail.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Make use of the popcnt instruction to provide optimized __arch_hweight*()
implementations. The generated code is shorter and avoids rather expensive
functions calls.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Assign the output from get_lowcore() to a local variable,
so the code is easier to read.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Assign the output from get_lowcore() to a local variable,
so the code is easier to read.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Assign the output from get_lowcore() to a local variable,
so the code is easier to read.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Assign the output from get_lowcore() to a local variable,
so the code is easier to read.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Assign the output from get_lowcore() to a local variable,
so the code is easier to read.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Replace all S390_lowcore usages in arch/s390/boot by get_lowcore().
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Replace all S390_lowcore usages in drivers/s390 by get_lowcore().
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Replace all S390_lowcore usages in arch/s390/ by get_lowcore().
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add a get_lowcore() function which returns the address
of lowcore (currently always NULL). This function will
be used as a replacement of the S390_lowcore macro.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The PMU for PAI NNPA counters enforces the following restriction:
- No per-task context for PAI sampling event NNPA_ALL
- No multiple system-wide PAI sampling event NNPA_ALL
Both restrictions are removed. One or more per-task sampling events
are supported. Also one or more system-wide sampling events are
supported.
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The PMU for PAI NNPA counters enforces the following restriction:
- No per-task context for PAI NNPA counters.
This restriction is removed. One or more per-task/system-wide counting
events can now be active at the same time while one system wide
sampling event is active.
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The PMU for PAI NNPA counters enforces the following restriction:
- No system wide counting while system wide sampling is active.
This restriction is removed. One or more system wide counting events
can now be active at the same time while at most one system wide
sampling event is active.
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The PMU for PAI crypto counters enforces the following restrictions:
- No per-task context for PAI crypto sampling event CRYPTO_ALL
- No multiple system-wide PAI crypto sampling event CRYPTO_ALL
Both restrictions are removed. One or more per-task sampling events
are supported. Also one or more system-wide sampling events are
supported.
Example for per-task context of sampling event CRYPTO_ALL:
# perf record -e pai_crypto/CRYPTO_ALL/ -- true
Example for system-wide context of sampling event CRYPTO_ALL:
# perf record -e pai_crypto/CRYPTO_ALL/ -a -- sleep 4
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The PMU for PAI crypto counters enforces the following restriction:
- No per-task context for PAI crypto counters events.
This restriction is removed. One or more per-task/system-wide counting
events can now be active at the same time while at most one system
wide sampling event is active.
Example for per-task context of a PAI crypto counter event:
# perf stat -e pai_crypto/KM_AES_128/ -- true
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The PMU for PAI crypto counters enforces the following restriction:
- No system wide counting while system wide sampling is active.
This restriction is removed. One or more system wide counting events
can now be active at the same time while at most one system wide
sampling event is active.
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Let's make it clearer that we are always working on folio flags and
never page flags of tail pages by converting remaining PG_arch_1 users
that modify page->flags to modify folio->flags instead.
No functional change intended, because we would always have worked with
the head page (where page->flags corresponds to folio->flags) and never
with tail pages.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20240508182955.358628-11-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Let's also implement HAVE_ARCH_MAKE_FOLIO_ACCESSIBLE, so we can convert
arch_make_page_accessible() to be a simple wrapper around
arch_make_folio_accessible(). Unfortunately, we cannot do that in the
header.
There are only two arch_make_page_accessible() calls remaining in gup.c.
We can now drop HAVE_ARCH_MAKE_PAGE_ACCESSIBLE completely form core-MM.
We'll handle that separately, once the s390x part landed.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20240508182955.358628-10-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Let's do the same as we did for uv_destroy_(folio|pte)() and
have the following variants:
(1) uv_convert_from_secure(): "low level" helper that operates on paddr
and does not mess with folios.
(2) uv_convert_from_secure_folio(): Consumes a folio to which we hold a
reference.
(3) uv_convert_from_secure_pte(): Consumes a PTE that holds a reference
through the mapping.
Unfortunately we need uv_convert_from_secure_pte(), because pfn_folio()
and friends are not available in pgtable.h.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20240508182955.358628-9-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Let's have the following variants for destroying pages:
(1) uv_destroy(): Like uv_pin_shared() and uv_convert_from_secure(),
"low level" helper that operates on paddr and doesn't mess with folios.
(2) uv_destroy_folio(): Consumes a folio to which we hold a reference.
(3) uv_destroy_pte(): Consumes a PTE that holds a reference through the
mapping.
Unfortunately we need uv_destroy_pte(), because pfn_folio() and
friends are not available in pgtable.h.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20240508182955.358628-8-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
It's not used outside of uv.c, so let's make it a static function.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20240508182955.358628-7-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
We removed the usage of PG_arch_1 for page tables in commit
a51324c430db ("s390/cmma: rework no-dat handling").
Let's update the comment in UV to reflect that.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20240508182955.358628-6-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Now that make_folio_secure() may only set PG_arch_1 for small folios,
let's convert relevant remaining UV code to only work on (small) folios
and simply reject large folios early. This way, we'll never end up
touching PG_arch_1 on tail pages of a large folio in UV code.
The folio_get()/folio_put() for functions that are documented to already
hold a folio reference look weird; likely they are required to make
concurrent gmap_make_secure() back off because the caller might only hold
an implicit reference due to the page mapping. So leave that alone for now.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20240508182955.358628-5-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
While s390x makes sure to never have PMD-mapped THP in processes that use
KVM -- by remapping them using PTEs in
thp_split_walk_pmd_entry()->split_huge_pmd() -- there is still the
possibility of having PTE-mapped THPs (large folios) mapped into guest
memory.
This would happen if user space allocates memory before calling
KVM_CREATE_VM (which would call s390_enable_sie()). With upstream QEMU,
this currently doesn't happen, because guest memory is setup and
conditionally preallocated after KVM_CREATE_VM.
Could it happen with shmem/file-backed memory when another process
allocated memory in the pagecache? Likely, although currently not a
common setup.
Trying to split any PTE-mapped large folios sounds like the right and
future-proof thing to do here. So let's call split_folio() and handle the
return values accordingly.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20240508182955.358628-4-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Let's factor out handling of LRU cache draining and convert the if-else
chain to a switch-case.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20240508182955.358628-3-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
folio_wait_writeback() requires that no spinlocks are held and that
a folio reference is held, as documented. After we dropped the PTL, the
folio could get freed concurrently. So grab a temporary reference.
Fixes: 214d9bbcd3a6 ("s390/mm: provide memory management functions for protected KVM guests")
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20240508182955.358628-2-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
