IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add the MediaTek SVS node: this will lower the voltage of various
components of the SoC based on chip quality (read from fuses) in
order to save power and generate less heat.
Also, reduce the LVTS_AP iospace to 0xc00, because that's exactly
where SVS starts.
- LVTS_AP start: 0x1100b000 length: 0xc00
- SVS start: 0x1100bc00 length: 0x400
Link: https://lore.kernel.org/r/20231121125044.78642-21-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The SVS iospace starts at 0x1100bc00 and not at 0x1100b000 as the
latter is the thermal sensor iospace instead.
Change the iospaces for both as following:
- Thermal: 0x1100b000, length 0xc00
- SVS: 0x1100bc00, length 0x400
Please note that while this would be a breaking change for SVS (but
not for thermal sensors), it doesn't matter because the svs driver
never worked anyway because of the missing trips in tzts2, causing
that thermal zone to never actually register, hence the SVS driver
to fail probing anyway.
Link: https://lore.kernel.org/r/20231121125044.78642-2-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fix warnings reported by dtbs_check :
arch/arm64/boot/dts/mediatek/mt8186.dtsi:1163.35-1168.5: Warning (simple_bus_reg):
/soc/mailbox@10686000: simple-bus unit address format error, expected "10686100"
arch/arm64/boot/dts/mediatek/mt8186.dtsi:1170.35-1175.5: Warning (simple_bus_reg):
/soc/mailbox@10687000: simple-bus unit address format error, expected "10687100"
by having the right bus address as node name.
Fixes: 379cf0e639ae ("arm64: dts: mediatek: mt8186: Add ADSP mailbox nodes")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Link: https://lore.kernel.org/r/20231204135533.21327-1-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The alias prefix for ovl_2l (2 layer overlay) is "ovl-2l", not "ovl_2l".
Fix this.
Fixes: 7e07d3322de2 ("arm64: dts: mediatek: mt8186: Add display nodes")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20231130074032.913511-4-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Whether a regulator under the MT6358 PMIC is a fixed regulator or not is
derived from the node name. Compatible string properties are not used.
This causes validation errors after the regulator binding is converted
to DT schema.
Drop the bogus "regulator-fixed" compatible properties from the PMIC's
regulator sub-nodes.
Fixes: 9f8872221674 ("arm64: dts: mt6358: add PMIC MT6358 related nodes")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20231130074032.913511-3-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The panel_flag property was used in ChromeOS's downstream kernel. It was
used to signal whether the downstream device was a fixed panel or
a connector for an external display.
This property was dropped in favor of standard OF graph descrptions of
downstream display panels and bridges.
Drop the property from the device tree file.
Fixes: cabc71b08eb5 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20231130074032.913511-2-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MT8188 is a SoC based on 64bit ARMv8 architecture. It contains 6 CA55
and 2 CA78 cores. MT8188 share many HW IP with MT65xx series.
We add basic chip support for MediaTek MT8188 on evaluation board.
Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20231023083839.24453-5-jason-ch.chen@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The reason for changing the patch was that while MT8188 uses the same
pwrap as MT8195, the original code was only applicable to 'compatible =
"mediatek,mt8188-pwrap"'. To resolve the DTBS check warning that
'['mediatek,mt8188-pwrap', 'mediatek,mt8195-pwrap', 'syscon'] is too
long', it is necessary to modify the code.
Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231023083839.24453-4-jason-ch.chen@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add mt8188 pericfg compatible to binding document.
Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231023083839.24453-3-jason-ch.chen@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
This commit adds dt-binding documentation for the MediaTek MT8188
reference board.
Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231023083839.24453-2-jason-ch.chen@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add the two DSI controller node and the associated DPHY nodes.
Individual boards have to enable them in the board device tree.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add the compatible string for MediaTek MT8195 SoC, using the same DSI
block as the MT8183.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The ldo_vcn33_bt and ldo_vcn33_wifi regulators are actually the same
regulator, having the same voltage setting and output pin. There are
simply two enable bits that are ORed together to enable the regulator.
Having two regulators representing the same output pin is misleading
from a design matching standpoint, and also error-prone in driver
implementations.
Now that the bindings have these two merged, merge them in the device
tree as well. Neither vcn33 regulators are referenced in upstream
device trees. As far as hardware designs go, none of the Chromebooks
using MT8183 w/ MT6358 use this output.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Convert the mediatek,audsys binding to YAML, together with the associated
binding bindings/sound/mt2701-afe-pcm.yaml .
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add device nodes for Media Data Path 3 (MDP3) modules.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
DMA-related nodes have their own standardized naming. Therefore,
the MT8195 VDOSYS RDMA has been unified and corrected.
Additionally, these modifications will facilitate the further
integration of bindings.
Fixes: 92d2c23dc269 ("arm64: dts: mt8195: add display node for vdosys1")
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
In order to generalize the node names, the DMA-related nodes
corresponding to MT8183 MDP3 need to be corrected.
Fixes: 60a2fb8d202a ("arm64: dts: mt8183: add MediaTek MDP3 nodes")
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add a compatible string for the PADDING block in MediaTek MT8195 that
is controlled by MDP3.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add compatible string and GCE property for MT8195 SPLIT, of
which is operated by MDP3.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add a compatible string for the OVL block in MediaTek MT8195 that
is controlled by MDP3.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add a compatible string for the MERGE block in MediaTek MT8195 that
is controlled by MDP3.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add a compatible string for the COLOR block in MediaTek MT8195 that
is controlled by MDP3.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add a compatible string for the AAL block in MediaTek MT8195 that
is controlled by MDP3.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add the fundamental hardware configuration of component TDSHP,
which is controlled by MDP3 on MT8195.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add the fundamental hardware configuration of component TCC,
which is controlled by MDP3 on MT8195.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add the fundamental hardware configuration of component STITCH,
which is controlled by MDP3 on MT8195.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add the fundamental hardware configuration of component HDR,
which is controlled by MDP3 on MT8195.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add the fundamental hardware configuration of component FG,
which is controlled by MDP3 on MT8195.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <zangelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MT8195 WROT inherited from MT8183, add the corresponding
compatible name to it.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MT8195 RSZ inherited from MT8183, add the corresponding
compatible name to it.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Added the configuration for MT8195 RDMA. In comparison to MT8183, it
no longer shares SRAM with RSZ, and there are now preconfigured 5 mbox.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
To simplify maintenance and avoid branches, the identical component
should be merged and placed in the path belonging to the MDP
(from display/* to media/*).
In addition, currently only MDP utilizes RDMA through CMDQ, and the
necessary properties for "mediatek,gce-events", and "mboxes" have been
set up for this purpose.
Within DISP, it directly receives component interrupt signals.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The DMA-related nodes RDMA/WROT in MDP3 should be changed to generic names.
In addition, fix improper space indent in example.
Fixes: 4ad7b39623ab ("media: dt-binding: mediatek: add bindings for MediaTek MDP3 components")
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The MDP3 RDMA needs to communicate with the SCP remote processor: allow
specifying a phandle to a SCP core.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add a phandle to the MT8195_POWER_DOMAIN_MFG1 power domain and
assign the GPU SRAM (vsram_others) supply to that in mt8195-cherry:
this allows to keep the sram powered up while the GPU is used.
This means that it's now possible to remove the regulator-always-on
property from the mt6359_vsram_others_ldo_reg vreg, so that it will
be switched on and off during suspend.
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MFG0 is the main power domain for the GPU and its surrounding glue
logic, and has a specific power rail.
Add its power supply on Cherry platforms and remove the now useless
(and wrong) regulator-always-on property from the vbuck1 regulator.
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add MT8188 VDOSYS0 and VDOSYS1 reset control bits.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add compatible name for MediaTek MT8188 VDOSYS1.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Padding is a new hardware module on MediaTek MT8188,
add dt-bindings for it.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add compatible name for MediaTek MT8188 MERGE.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add compatible name for MediaTek MT8188 MDP-RDMA.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add compatible name for MediaTek MT8188 ETHDR.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
This helps validating DTS files. Introduced changes:
1. Improved title
2. Simplified description (dropped "This describes the device tree...")
3. Dropped undocumented "reset-names" from example
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
pico is also known as Acer Chromebook Spin 311.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[Angelo: Fixed blank lines at the end for pico.dts]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add pico (sku1) and pico6 (sku2).
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
makomo is also known as Lenovo 100e Chromebook 2nd Gen MTK 2.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add makomo sku0 and sku1 which uses different audio codec.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
katsu is also known as ASUS Chromebook Detachable CZ1.
Let katsu and kakadu set its own touchscreen and panel compatible. Remove
these setting from the common dtsi for readability.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add katsu sku32 and sku38 which uses different audio codec.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MT6358 is a PMIC that is typically used on MT8183 boards, and it has
its own dtsi file, declaring interrupts-extended on its node.
The interrupt pin of that PMIC is connected to a SoC GPIO and that
is therefore not only SoC-specific, but board-specific: this means
that the interrupt-extended property does not belong to the PMIC
dtsi file, but to board files using that PMIC.
For correctness, transfer the interrupts-extended property from the
PMIC-specific mt6358.dtsi to board files.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
