IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Detect device type and config mode in the PCI probe helper, but leave
DRM device initialization where it is. Structures the driver probe and
setup code into a detection and an initialization phase.
A later patch can add branching to the device-initialization code. Each
chip type can have it own initializer function, if necessary.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-11-tzimmermann@suse.de
There are three different ways of retrieving the I/O-memory ranges
for AST devices: either from PCI BAR 1, from PCI BAR 2 or from PCI
BAR 1 by 'guessing'.
Make the respective code more readable by making each case self-
contained. Also add error checking against the length of the PCI
BARs.
v2:
* fix I/O range length to 128 bytes
* fix length test for PCI BAR 2
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-3-tzimmermann@suse.de
The lock for the I/O registers is only relevant during mode-setting
operations. It protects the registers from concurrent access from
reading EDID information.
Reduce lock coverage to mode setting, rename the lock and move it
entirely into the mode-setting code. No functional changes, as the
I/O lock was never used for anything else than mode setting.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-2-tzimmermann@suse.de
ASpeed distinguishes among various generations of the AST graphics
chipset with various models. [1] The most-recent model AST 2600 is
of the 7th generation, the AST 2500 is of the 6th generation, and so
on.
The ast driver simply picks one of the models as representative for
the whole generation. In several places, individual models of the
same generation need to be handled differently, which then requires
additional code for detecting the model.
Introduce different generations of the Aspeed chipset. In the source
code, refer to the generation instead of the representation model where
possible. The few places that require per-model handling are now clearly
marked.
In the enum ast_chip, we arrange each model's value such that it
encodes the generation. This allows for an easy test. The actual values
are ordered, but not of interest to the driver.
v2:
* use __ast_gen_is_eq() (Jingfeng)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://web.archive.org/web/20141007093258/http://www.aspeedtech.com/products.php?fPath=20 # 1
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-10-tzimmermann@suse.de
Replace GEM VRAM helpers with GEM SHMEM helpers in ast. Avoids OOM
errors when allocating video memory. Also adds support for dma-buf
functionality.
Aspeed display hardware supports display resolutions of FullHD and
higher at 32-bit pixel depth. But the amount of video memory is in
the range of 8 MiB to 32 MiB, which adds constraints to the actually
available resolutions. As atomic modesetting with VRAM helpers
requires double buffering in video memory, ast fails to pageflip
in some configurations. For example, FullHD with an active cursor
plane does not work on devices with 16 MiB of video memory.
Resolve this problem by converting the ast driver to GEM SHMEM helpers.
Keep the buffer objects in system memory and copy to video memory
on pageflips via shadow-plane helpers. Userspace used to require shadow
planes for decent performance, but that's now provided by the driver.
To replace the memory management, the patch also implements damage
handling for the primary plane.
With GEM SHMEM helpers, dma-buf import and export is now supported
by ast. This allows easier screen mirroring across devices or with
an Aspeed-based BMC. A corresponding feature request is available
at [1].
v2:
* fix typos in commit message (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/dri-devel/20220901124451.2523077-1-oushixiong@kylinos.cn/ # [1]
Link: https://patchwork.freedesktop.org/patch/msgid/20221013112923.769-8-tzimmermann@suse.de
V1:
1. The MCU FW controling ASPEED DP is loaded by BMC boot loader.
2. Driver starts after CR[3:1] == 111b that indicates Tx is ASTDP,
and CRD1[5] has been asserted by BMVC boot loader.
3. EDID is prioritized by DP monitor.
4. DP's EDID has high priority to decide resolution supporting.
V2:
Modules description:
1. ASTDP (ASPEED DisplayPort) is controlled by dedicated
AST-MCU (ASPEED propriatary MCU).
2. MCU is looping in charged of HPD, Read EDID, Link Training with
DP sink.
3. ASTDP and AST-MUC reside in BMC (Baseboard Management controller)
addressing-space.
4. ASPEED DRM driver requests MCU to get HPD and EDID by CR-scratched
register.
Booting sequence:
1. Check if TX is ASTDP // ast_dp_launch()
2. Check if DP-MCU FW has loaded // ast_dp_launch()
3. Read EDID // ast_dp_read_edid()
4. Resolution switch // ast_dp_SetOutput()
V3:
1. Remove unneeded semicolon.
2. Apply to git://anongit.freedesktop.org/drm/drm, instead of
git://anongit.freedesktop.org/drm/drm-misc
3. Resolve auto build test WARNINGs on V1 patch.
V4:
1. Sync code-base with kernel 5.17_rc6
2. Remove the define of DPControlPower, because DP chips need to be
powered on to be used.
3. Remove the switches of PHY and Display from EDID procedure.
4. Revise increaing delay to fixed delay, because this version kernel
doesn't detect minitor consistenntly.
5. Create clean-up code used for reset of power state on errors with
-EIO manner.
6. Revise the DP detection by TX type and its DP-FW status during
booting and resume.
7. Correct the CamelCase Style.
8. Use register reading while needing, and remove to hold full
register.
9. Instead of 'u8', revise to 'bool' on swwitch of PHY and video.
10.Correct typo
11.Remove the duplicated copy of TX definition.
12.Use EDID_LENGTH as the constant of 128.
Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220428075603.20904-1-kuohsiang_chou@aspeedtech.com
[Bug][AST2500]
V1:
When AST2500 acts as stand-alone VGA so that DRAM and DVO initialization
have to be achieved by VGA driver with P2A (PCI to AHB) enabling.
However, HW suggests disable Fast reset mode after DRAM initializaton,
because fast reset mode is mainly designed for ARM ICE debugger.
Once Fast reset is checked as enabling, WDT (Watch Dog Timer) should be
first enabled to avoid system deadlock before disable fast reset mode.
V2:
Use to_pci_dev() to get revision of PCI configuration.
V3:
If SCU00 is not unlocked, just enter its password again.
It is unnecessary to clear AHB lock condition and restore WDT default
setting again, before Fast-reset clearing.
V4:
repatch after "error : could not build fake ancestor" resolved.
V5:
Since CVE_2019_6260 item3, Most of AST2500 have disabled P2A(PCIe to AMBA).
However, for backward compatibility, some patches about P2A, such as items
of v5.2 and v5.3, are considered to be upstreamed with comments.
1. Add define macro to improve source readability.
ast_drv.h, ast_main.c, ast_post.c
2. Add comment about "Fast restet" is enabled for ARM-ICE debugger
ast_post.c
3. Add comment about Reset USB port to patch USB unknown device issue
ast_post.c
Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210709080900.4056-1-kuohsiang_chou@aspeedtech.com
[Bug][DP501]
If ASPEED P2A (PCI to AHB) bridge is disabled and disallowed for
CVE_2019_6260 item3, and then the monitor's EDID is unable read through
Parade DP501.
The reason is the DP501's FW is mapped to BMC addressing space rather
than Host addressing space.
The resolution is that using "pci_iomap_range()" maps to DP501's FW that
stored on the end of FB (Frame Buffer).
In this case, FrameBuffer reserves the last 2MB used for the image of
DP501.
Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421085859.17761-1-kuohsiang_chou@aspeedtech.com
The commit 7cbb93d898 ("drm/ast: Use managed pci functions")
converted a few PCI accessors to the managed API and dropped the
manual pci_iounmap() calls, but it seems to have forgotten converting
pci_iomap() to the managed one. It resulted in the leftover resources
after the driver unbind. Let's fix them.
Fixes: 7cbb93d898 ("drm/ast: Use managed pci functions")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421170458.21178-1-tiwai@suse.de
The ast driver's load and unload functions are left-overs from when
struct drm_driver.load/unload was still in use. The PCI probe helper
allocated the DRM device and ran load to initialize it.
This patch replaces this code with device create and destroy. The
main difference is that the device's create function allocates the
DRM device and ast structures in the same place. This will be required
for switching ast to managed allocations.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-4-tzimmermann@suse.de
