IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The watchdog, the reset controller, the RTC, the shutdown controller, the
timer counters and the LCD PWM need the slow clock, add it where necessary.
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The watchdog, the reset controller, the RTC, the shutdown controller, the
timer counters and the LCD PWM need the slow clock, add it where necessary.
[boris.brezillon@free-electrons.com: add tcb clocks]
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The watchdog, the reset controller, the RTC, the shutdown controller, the
timer counters and the LCD PWM need the slow clock, add it where necessary,
The LCD PWM will be handled later.
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The watchdog, the reset controller, the RTC, the real-time timer, the
shutdown controller and the timer counter need the slow clock, add it where
necessary.
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The watchdog, the reset controller, the RTC, the shutdown controller, the
timer counters and the LCD PWM need the slow clock, add it where necessary.
The LCD PWM will be handled later.
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The watchdog, the reset controller, the RTC, the real-time timer, the
shutdown controller and the timer counters need the slow clock, add it
where necessary.
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The watchdog, the reset controller, the two real-time timers, the shutdown
controller and the timer counter need the slow clock, add it where
necessary.
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The watchdog, the reset controller, the real-time timer, the shutdown
controller and the timer counter need the slow clock, add it where
necessary.
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The watchdog, the reset controller, the real-time timer, the shutdown
controller, the timer counters need the slow clock, add it where necessary.
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The system timer, the RTC and the timer counters need the slow clock, add
it.
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
I managed to mess up omap3 power domain operations with commit
7c80a3f89c51 ("ARM: OMAP2+: Add custom prwdm_operations for 81xx
to support dm814x"), by default we should keep on using the
omap3_pwrdm_operations, only 81xx needs custom handling.
This causes omap3 PM to break so we won't hit off mode any longer
causing idle power consumption go up from less than 10mW to over
50 mW.
Fixs: 7c80a3f89c51 ("ARM: OMAP2+: Add custom prwdm_operations for
81xx to support dm814x")
Signed-off-by: Tony Lindgren <tony@atomide.com>
The title says it all. The name of the dts file as been changed to
better reflect the manufacturer's device name (LS-WSGL), rather than
the original "lsmini", which exists in a kirkwood version too.
[gregory.clement@free-electrons.com]: use tab instead of space to
indent dts at line 185. Reslove merge conflict with patch "ARM: dts:
orion5x: add buffalo linkstation ls-wtgl" in the file
arch/arm/boot/dts/Makefile.
Signed-off-by: Benjamin Cama <benoar@dolka.fr>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Alexey Kopytko <alexey@kopytko.ru>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
PMU_GPIOINT_WAKEUP_EN seems needed when entering the shallow suspend
(with logic staying on) but does not seem to be needed for the deep
suspend for unknown reasons.
Testing revealed that this setting really is necessary to reliably
resume the veyron devices from suspend.
Reported-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Currently the stabilization thresholds for the oscillator and external pmu
are statically set to 30ms based on a 32kHz clock rate. This leaves out the
case when we don't switch to the 32kHz clock when only entering the shallow
suspend mode where the logic keeps running.
So, set the correct threshold after we have determined if we switch to the
32kHz clock or stay with the 24MHz one. Also set the oscillator-
stabilization to 0 if it is kept running during suspend, as it of course
does not need to stabilize then.
Reported-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
The variable name is misleading, as the deep suspend mode always switches
the main supplying clock to the 32kHz source. Additionally the main
oscillator remains running in some cases, which this var indicates.
So rename it to osc_disable to clarity.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
This patch is the touchscreen part for LCD screens sold with devkit8000
board.
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The PCIe interrupts are also routed through the GPC. This has been
missed from the conversion to stacked IRQ domains as the PCIe
controller uses an explicit interrupt map and thus doesn't inherit
the SoC global interrupt parent.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Cc: <stable@vger.kernel.org> # 4.1
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Two patches that enable various Allwinner related drivers drivers both in
sunxi_defconfig and in multi_v7_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJVvdfTAAoJEBx+YmzsjxAgzisQAIOaRrW9+/m+u10n9vRXttt/
cgcSMfWyII2AZlYobH8EKaRS3HYcN4Dv5iinShJuMB9O6ScX6/rp3Oc+cy67vpOT
N++B9Fyg17k0LVMnnfBhiVncLvJje33Ducucxyiw1sGZjlY15HBFI99PkQo+SCMa
xYjbqoyIf/r0jIFyV4EkN+O0gzaIeXFm6KcqwVRkBDSeK7aItFrWg/g/8O45W3t+
eK2OZwXALny1puB6VUgSGilTaCl+DXdagsDuXYjgSV1VfA1iohfNx0Y9nu3o3Ed+
buxLaZtmdTejS6bNbfyDFd6LJxLZpRQ2T8XXnNXw8sohaglchkMsobuuqITaQX5g
IF1RiYXzIdzFiH/JPFiL9OPYa4nGtxD4ntr0HBK41EK5PqRGNE+u7MOT+Uw+8Ouq
AJJWTnSc18sDep7Y23zgFLk7r4d1Lproino531sokJiJpbG9uFd0dnWxEGtofPMG
lhXQvIwzveEQvrOgQM+wCgnSSbmfuDI4jnsmYfLqMtRSCazwv64Pa1ESZtvXV1Au
WfDjecL0/V7FwFf1BsEW3MOfE3TdyY8vW9urfY3ewZKsmwwlimv82QdMrua6p4nA
ou67eVlkdnkZ7/Nxx2/MBqP+VqmOjm/6ovfm/Udih+AwWX7TFQGKFLFQFSujn6Wi
AxJ5RxBRlhNbGCgNPkH0
=SkuD
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig
Allwinner defconfig changes for 4.3
Two patches that enable various Allwinner related drivers drivers both in
sunxi_defconfig and in multi_v7_defconfig
* tag 'sunxi-defconfig-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev
ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE
Signed-off-by: Olof Johansson <olof@lixom.net>
A bunch of device tree patches that:
- Enable the OTG controller on some boards
- Various additions to the existing boards
- New boards: A33 Ippo Q8H, Iteaduino Plus,
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ebRO
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt
Allwinner Device Tree changes for 4.3
A bunch of device tree patches that:
- Enable the OTG controller on some boards
- Various additions to the existing boards
- New boards: A33 Ippo Q8H, Iteaduino Plus,
* tag 'sunxi-dt-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (35 commits)
ARM: dts: sun7i: Change cubietruck wifi enable pin to use mmc-pwrseq
ARM: dts: sun5i: hsg-h702: Enable USB OTG controller
ARM: dts: sun5i: hsg-h702: Enable side volume buttons with LRADC
ARM: dts: sun8i: Enable USB DRC on Ippo Q8H-A33 tablet
ARM: dts: sun5i: Enable USB DRC on A13 OLinuxIno
ARM: dts: sun5i: Enable USB DRC on A10s OLinuxIno Micro
ARM: dts: sun4i: Enable USB DRC on A10 OLinuxIno Lime
ARM: sunxi: dt: Convert users to the PIO interrupts binding
ARM: dts: sun4i: Add Iteaduino Plus A10
ARM: dts: A10s-OLinuxIno: Add a node for axp152 pmic
ARM: dts: axp152: Add a dtsi file for the axp152 pmic
ARM: dts: sun6i: Enable otg controller on the cs908
ARM: dts: sun4i: Enable otg controller on the mini-x
ARM: dts: sun4i: Enable otg controller on the ba10-tvbox
ARM: dts: sunxi: Add regulator-boot-on to usb host port regulator nodes
devicetree: Add msi to the vendor-prefix list
ARM: sun8i: dts: Add Ippo-q8h v1.2 with A33
ARM: dts: sun8i: sina33: Enable USB hosts
ARM: dts: sun8i: Enable USB host on GA10H-A33 tablets
ARM: dts: sun8i: Enable USB DRC on GA10H-A33 tablets
...
Signed-off-by: Olof Johansson <olof@lixom.net>
This removes a lot of ancient cruft from the Ux500 SMP boot.
Instead of the pen grab/release, just point the ROM to
secondary_boot() and start the second CPU there, then send
the IPI.
Use our own SMP enable method. This enables us to remove the
last static mapping and get both CPUs booting properly.
Tested this and it just works.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
* fixes: (28 commits)
ARM: ux500: add an SMP enablement type and move cpu nodes
ARM: dts: keystone: fix dt bindings to use post div register for mainpll
ARM: nomadik: disable UART0 on Nomadik boards
ARM: dts: i.MX35: Fix can support.
ARM: OMAP2+: hwmod: Fix _wait_target_ready() for hwmods without sysc
ARM: dts: add CPU OPP and regulator supply property for exynos4210
ARM: dts: Update video-phy node with syscon phandle for exynos3250
ARM: keystone: dts: rename pcie nodes to help override status
ARM: keystone: dts: fix dt bindings for PCIe
ARM: pxa: fix dm9000 platform data regression
ARM: DRA7: hwmod: fix gpmc hwmod
ARM: dts: Correct audio input route & set mic bias for am335x-pepper
ARM: OMAP2+: Add HAVE_ARM_SCU for AM43XX
MAINTAINERS: digicolor: add dts files
ARM: ux500: fix MMC/SD card regression
ARM: ux500: define serial port aliases
ARM: dts: OMAP5: Add #iommu-cells property to IOMMUs
ARM: dts: OMAP4: Add #iommu-cells property to IOMMUs
ARM: dts: Fix frequency scaling on Gumstix Pepper
ARM: dts: configure regulators for Gumstix Pepper
...
The "cpus" node cannot be inside the "soc" node, while this
works for the CoreSight blocks, the early boot code will look
for "cpus" directly under the root node, so this is a hard
convention. So move the CPU nodes.
Augment the "reg" property to match what is actually in the
hardware: 0x300 and 0x301 respectively.
Then add an SMP enablement type to be used by the SMP init
code, "ste,dbx500-smp".
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Devkit8000 was sold with a 4.3" LCD or 7.0" or without. This patch
creates one dts file per bundle.
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit adds the support of DVI output on the devkit8000 board.
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
[tony@atomide.com: added missing sign as noted by Anthoine]
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit adds the support of TV output on the devkit8000 board.
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
[tony@atomide.com: added missing sign as noted by Anthoine]
Signed-off-by: Tony Lindgren <tony@atomide.com>
The keymap is convert in devicetree from the legacy board file.
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
[tony@atomide.com: added missing sign as noted by Anthoine]
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch declares the LEDB usage to the PMU stat monitor.
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
[tony@atomide.com: added missing sign as noted by Anthoine]
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch links the user button to the BTN_EXTRA action.
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
[tony@atomide.com: added missing sign as noted by Anthoine]
Signed-off-by: Tony Lindgren <tony@atomide.com>
DCDC5 and DCDC6 supply rtc and need to be on for accessing the module.
On A1 revision of the TPS65218, FSEAL bit would be undefined without
coin-cell present which in many cases led to it being set, causing DCDC5
and DCDC6 to stay active, but also leading to unexplained failures when
it was not. On B1 revision, FSEAL is always 0 when no coin-cell is present
so this patch is required on boards with B1 revision to ever work. This
implementation works on boards with either A1 or B1 revision and makes
sure that DCDC5 and DCDC6 always stay active.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Compared to da830-rtc compatibility am3352-rtc is more compatible to
the one in am437x. Hence adding the am3352-rtc compatible to cover the
entire feature set.
The ti,am4372-rtc has no Documentation and not used even in the driver
hence removing it.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Setup the emc pins used by external memory devices and add
configuration for the devices found on the Hitex eval board.
The Hitex eval board has a NOR Flash attached to chip select 0
and 512 kB of SRAM on chip select 2.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable Ethernet and add pin muxing and set the correct
frequency on the enet tx clock input.
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Setup pin muxing and properties for the debug console on uart0.
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Hook up LEDs on the outputs from the D-type flip-flop found on
the address/data bus.
Note that the LEDx label in the schematics is reversed in regard
to the bits on the data bus. Hence the reverse ordering used here.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Setup the emc pins used by external memory devices and add
configuration for the devices found on the EA4357 devkit.
The EA4357 devkit has a NOR Flash attached to chip select 0
and a D-type flip-flop used for LEDs on chip select 2.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable USB0 on the EA4357 devkit and setup the required USB0
control pins.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
All devices in the LPC18xx/43xx familiy contain a ARM PL172
MultiPort Memory Controller (MPMC).
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
NXP LPC185x and LPC435x/70 devices contain a ARM PL111 lcd controller.
Signed-off-by: Joachim Eastwood <joachim.eastwood@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add the USB OTG phy under the CREG syscon node and attach it to
the USB0 EHCI controller.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
*) Fix compiler error when sun4i usb phy driver is built as module
*) Fix SATA Lockup issue in dra7 SoC
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=j6wu
-----END PGP SIGNATURE-----
Merge tag 'phy-for-4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus
Kishon writes:
phy: for 4.2-rc6
*) Fix compiler error when sun4i usb phy driver is built as module
*) Fix SATA Lockup issue in dra7 SoC
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
The PMU device contains an interrupt controller, power control and
resets. The interrupt controller is a little sub-standard in that
there is no race free way to clear down pending interrupts, so we try
to avoid problems by reducing the window as much as possible, and
clearing as infrequently as possible.
The interrupt support is implemented using an IRQ domain, and the
parent interrupt referenced in the standard DT way.
The power domains and reset support is closely related - there is a
defined sequence for powering down a domain which is tightly coupled
with asserting the reset. Hence, it makes sense to group these two
together, and in order to avoid any locking contention disrupting this
sequence, we avoid the use of syscon or regmap.
This patch adds the core PMU driver: power domains must be defined in
the DT file in order to make use of them. The reset controller can
be referenced in the standard way for reset controllers.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add the description of the GPU power domain to the PMU DT entry.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add the description of the video decoder power domain to the PMU DT
entry.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Now that we have a PMU driver, we can wire up the RTC interrupt in the
DT description for Dove.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add the PMU node, and move the child devices of the PMU node beneath
this new node, giving it a "simple-bus" so that the OF platform
device creator will create these child devices. No functional change
from this is expected.
The PMU provides multiple features, including an interrupt, reset,
power and isolation controller.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Merge "ARM: Interrupt cleanups and API change preparation" from Thomas
Gleixner:
The following patch series contains the following changes:
- Consolidation of chained interrupt handler setup/removal
- Switch to functions which avoid a redundant interrupt
descriptor lookup
- Preparation of interrupt flow handlers for the 'irq' argument
removal
* 'queue/irq/arm' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ARM/orion/gpio: Prepare gpio_irq_handler for irq argument removal
ARM/pxa: Prepare balloon3_irq_handler for irq argument removal
ARM/pxa: Prepare *_irq_handler for irq argument removal
ARM/dove: Prepare pmu_irq_handler for irq argument removal
ARM/sa1111: Prepare sa1111_irq_handler for irq argument removal
ARM/locomo: Prepare locomo_handler for irq argument removal
ARM, irq: Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc
ARM/LPC32xx: Use irq_set_handler_locked()
ARM/irq: Use access helper irq_data_get_affinity_mask()
ARM/locomo: Consolidate chained IRQ handler install/remove
ARM/orion: Consolidate chained IRQ handler install/remove
Signed-off-by: Olof Johansson <olof@lixom.net>
Nand controller often share some pins with sd/mmc controller on
atlas and prima series, nand node can be disabled if the pins are
used by sd/mmc controller.
Signed-off-by: Huayi Li <huayi.li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
this patch adds SDR(software digital raio) nodes and the DMA channels
for it.
Signed-off-by: Yonghui Zhang <yonghui.zhang@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
