IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Remove almost all existing style issues of type OPEN_BRACE reported
by checkpatch.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Remove almost all existing style issues of type SPACING reported
by checkpatch.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We need to hold vm->lock before the xe_vm_is_closed_or_banned().
Else we get this splat:
[ 802.555227] ------------[ cut here ]------------
[ 802.555234] WARNING: CPU: 33 PID: 3122 at drivers/gpu/drm/xe/xe_vm.h:60
[ 802.555515] CPU: 33 PID: 3122 Comm: xe_exec_fault_m Tainted:
...
[ 802.555709] Call Trace:
[ 802.555714] <TASK>
[ 802.555720] ? __warn+0x81/0x170
[ 802.555737] ? xe_vm_madvise_ioctl+0x2de/0x440 [xe]
Fixes: 9d858b69b0cf ("drm/xe: Ban a VM if rebind worker hits an error")
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
It looks like the single-tile PVC in CI dies during module load when doing
the pcode init. From the logs we try to access the address
0000000000138124 which doesn't map to anything, however 0x138124 also
looks to be the PCODE_MAILBOX register. So looks like the per-tile
mmio register mapping is NULL.
During probe the tile count is potentially trimmed, since we don't know
the real count until we actually probe the device. This seems to be
the case for single-tile PVC or similar devices. However it looks like
the gt_count is never adjusted to respect this updated tile count. As a
result when later doing some for_each_gt() loop, like we do for the
pcode, we can get back some GT that maps to some non-existent tile
which hasn't been properly set up, leading to crashes.
Try to fix this by adjusting the gt_count after probing the tiles for
real.
v2: Fix typo so it actually builds
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/383
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In various test cases that put the system under a heavy load, we can
sometimes see errors with missed TLB invalidations. In such cases we see
the interrupt arrive for the invalidation from the GuC, however the
actual processing of the completion is pushed onto a workqueue and
handled with all the other CT stuff, which might take longer than
expected. Since we expect TLB invalidations to complete within a
reasonable amount of time (at most ~250ms), and they do seem pretty
critical, allow handling directly from the CT fast-path.
v2 (José):
- Actually use the correct spinlock/unlock_irq, since pending_lock is
grabbed from IRQ.
v3:
- Don't publish the TLB fence on the list until after we fully
initialize it and successfully do the CT send. The list is now only
protected by the spin_lock pending_lock and we can't hold that
across the entire TLB send operation.
v4 (Matt Brost):
- Be careful with racing against fast CT path writing the seqno,
before we have actually published the fence.
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/297
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/320
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/449
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Looks to always to be zero when inspecting the CTB dump.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
To help debugging, sample the current seqno_recv and dump it out if we
encounter a TLB timeout for the fences path.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We might have various kworkers waiting for TLB flushes to complete which
are not tracked with an explicit TLB fence, however at this stage that
will never happen since the CT is already disabled, so make sure we
signal them here under the assumption that we have completed a full GT
reset.
v2:
- We need to use seqno - 1 here. After acquiring ct->lock the seqno is
actually the next users seqno and not the pending one.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Assumption here is that submission is disabled along with CT, and full
GT reset will also nuke TLBs, so should be safe to signal all in-flight
TLB fences, but only after the actual reset so move the placement
slightly.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The fast-path CT could be running as we enter a runtime-suspend or
potentially a GT reset, however here we only use the ct->fast_lock and
not the full ct->lock. Before disabling the CT, also serialise against
the fast_lock to ensure any in-progress work finishes before we start
nuking the CT related stuff. Once we disable ct->enabled and drop the
lock, any new work should fail gracefully, and anything that was in
progress should be finished.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If we are in the middle of a GT reset or similar the CT might be
disabled, such that the CT send fails. However we already incremented
gt->tlb_invalidation.seqno which might lead to warnings, since we
effectively just skipped a seqno:
0000:00:02.0: drm_WARN_ON(expected_seqno != msg[0])
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reserving and checking for space on the g2h side relies on the
fast_lock, and not the CT lock since we need to release space from the
fast CT path. Make sure we hold it when checking for space and reserving
it. The main concern is calling __g2h_release_space() as we are reserving
something and since the info.space and info.g2h_outstanding operations
are not atomic we can get some nonsense values back.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Just checking xe_device_mem_access_ongoing() is not enough, we also need
to hold the reference otherwise the ref can transition from 1 -> 0 as we
enter g2h_read(), leading to warnings. While we can't do a full rpm sync
in the IRQ, we can keep the device awake if the ref is non-zero.
Introduce a new helper for this and set it to work in for the CT
fast-path.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Ensure we load gt->tlb_invalidation.seqno_recv once, and use that for
our seqno checking. The gt->tlb_invalidation_seqno_past is a shared
global variable and can potentially change at any point here. However
the checks here need to operate on a stable version of seqno_recv for
this to make any sense.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
wake_up_all() and wait_event_timeout() already have the correct barriers
as per https://www.kernel.org/doc/Documentation/memory-barriers.txt.
This should ensure that the seqno_recv write can't be re-ordered wrt to
the actual wake_up_all() i.e we get woken up but there is no write. The
reader side with wait_event_timeout() also has the correct barriers.
With that drop the hand rolled smp_wmb(), which is anyway missing some
kind of matching barrier on the reader side.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Rather than open coding VM binds and VMA tracking, use the GPUVA
library. GPUVA provides a common infrastructure for VM binds to use mmap
/ munmap semantics and support for VK sparse bindings.
The concepts are:
1) xe_vm inherits from drm_gpuva_manager
2) xe_vma inherits from drm_gpuva
3) xe_vma_op inherits from drm_gpuva_op
4) VM bind operations (MAP, UNMAP, PREFETCH, UNMAP_ALL) call into the
GPUVA code to generate an VMA operations list which is parsed, committed,
and executed.
v2 (CI): Add break after default in case statement.
v3: Rebase
v4: Fix some error handling
v5: Use unlocked version VMA in error paths
v6: Rebase, address some review feedback mainly Thomas H
v7: Fix compile error in xe_vma_op_unwind, address checkpatch
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Not needed so remove it.
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This will help with the GPUVA port as the internals of struct xe_vma
will change.
v2: Update comment around helpers
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.kernel.org>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We cannot recover a VM if a rebind worker hits an error, ban the VM if
happens to ensure we do not attempt to place this VM on the hardware
again.
A follow up will inform the user if this happens.
v2: Return -ECANCELED in exec VM closed or banned, check for closed or
banned within VM lock.
v3: Fix lockdep splat by looking engine outside of vm->lock
v4: Fix error path when engine lookup fails
v5: Add debug message in rebind worker on error, update comments wrt
locking, add xe_vm_close helper
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
xe_vm_create used the IOCTL create flags in a few places rather than the
internal VM flags and this just happened to work as these values
matched. This is risky (and incorrect) as the internal flag values are
free to change. Fix this and use the internal VM flag values.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definition to prevent
modification at runtime.
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently return from xe_gt_sysfs_init() is ignored
and also a failure in xe_gt_sysfs_init() isn't fatal
so make it return void.
V2 :
- add drm_warn in error paths - Himal
- Edit commit message - Nirmoy
Acked-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In the ABI header, GUC_CTB_MSG_MIN_LEN is '1' because
GUC_CTB_HDR_LEN is 1. This aligns with H2G/G2H CTB specification
where all command formats are defined in units of dwords so that '1'
is a dword. Accordingly, GUC_CTB_MSG_MAX_LEN is 256-1 (i.e. 255
dwords). However, h2g_write was incorrectly assuming that
GUC_CTB_MSG_MAX_LEN was in bytes. Fix this.
v3: Fix nit on #define location.(Matt)
v2: By correctly treating GUC_CTB_MSG_MAX_LEN as dwords, it causes
a local array to consume 4x the stack size. Rework the function
to avoid consuming stack even if the action size is large. (Matt)
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Little by little, make stuff feature complete.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If the default engine m->eng was used, there is no check for idle and
a cpu page-table update may thus happen in parallel with a gpu one.
Don't allow CPU page-table updates with the default engine until
the engine is idle.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230629205134.111849-2-thomas.hellstrom@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Newer Intel platforms require that inspect the contents of the GMD_ID
registers very early in the driver initialization process to determine
the IP version (and proper init sequences), of the platform. Move the
general PCI device setup and enablement slightly earlier, before we
start trying to peek at the GMD_ID registers.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20230614205202.3376752-5-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If the GMD_ID register reports a higher media revision ID than we're
expecting, print the media revid, not the graphics revid, in the
debug message.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20230614205202.3376752-4-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
It's legitimate for the media GMD_ID register to read back as 0x0 if
media functionality is fused off or otherwise not present on the
platform. Avoid printing an "unknown media version" error message for
this case.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20230614205202.3376752-3-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
peek_gmdid() returns the IP version, not the raw value of the GMD_ID
register. Make sure we extract and return the rev_id field as well so
that it can be used to determine the IP steppings properly.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20230614205202.3376752-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Current size member of vram struct does not give
complete information as what "size" contains. Does
it contain reserved portions or not. Name it usable
size and accordingly describe other size members as
well.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add sysfs entry to read per tile physical memory
including stolen memory.
V5:
- rename var name and make it part of vram struct - Lucas
V4:
- %s/addr_range/physical_vram_size_byes, make it
user readable name - Joonas/Aravind
- Display in bytes - Joonas/Aravind
V3:
- Exclude DG1, replace sysfs_create_file/files - Aravind
V2:
- Use DEVICE_ATTR_RO - Aravind
- Dont put kobj on sysfs_file_create fail - Himal
- Skip addr_range sysfs create for non dgfx - Himal
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
With the separation of xe_tile and xe_gt, We now consider
a PCI device (xe_device) to contain one or more tiles (struct xe_tile).
Each tile will contain one or more GTs (struct xe_gt).
So lets align sysfs paths accordingly.
TODO: Currently we have gt0 under tile0 and gt1 under tile1
on multi-tile. This GT indexing still under discussion, when
it is concluded we need to revisit this change.
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We have recently introduced tile for each gpu,
so lets add sysfs entry per tile for userspace
to provide required information specific to tile.
V5:
- define ktype as const
V4:
- Reorder headers - Aravind
V3:
- Make API to return void and add drm_warn - Aravind
V2:
- Add logs in failure path
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Using jiffies as a timeout from userspace is weird even if
theoretically exists possiblity of acquiring jiffies via getconf.
Unfortunately this method is unreliable and the returned
value may vary from the one configured in the kernel config.
Now timeout is expressed in nanoseconds and its interpretation depends
on setting DRM_XE_UFENCE_WAIT_ABSTIME flag. Relative timeout (flag
is not set) means fence expire at now() + timeout. Absolute timeout
(flag is set) means that the fence expires at exact point of time.
Passing negative timeout means we will wait "forever" by setting
wait time to MAX_SCHEDULE_TIMEOUT.
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20230628055141.398036-2-zbigniew.kempczynski@intel.com
Signed-off-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If !no_engines, then we use copy_from_user to copy to the 'eci' array,
which has XE_HW_ENGINE_MAX_INSTANCE members. The amount of members
copied is given by the user in args->num_engines, so add code to check
that args->num_engines does not exceed XE_HW_ENGINE_MAX_INSTANCE. It's
an unsigned value so there's no need to check for negative values.
Fixes error messages such as:
Buffer overflow detected (54 < 18446744073709551520)!
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230626212221.136640-2-paulo.r.zanoni@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There's this shared machine running xe.ko and I often log in to see my
tmux corrupted by messages such as:
usercopy: Kernel memory overwrite attempt detected to wrapped address (offset 0, size 18446660151965198754)!
I also sometimes see:
kernel BUG at mm/usercopy.c:102!
Someone is running a program that's definitely submitting random
numbers to this ioctl. If you pass width=65535 and
num_placements=32769 then you get a negative 'len', which avoids the
EINVAL check, leading to the bug.
Switch 'len' to u32. It is the result of the multiplication of two u16
numbers, so it won't be able to overflow back into smaller numbers as
an u32.
v2: Make len u32 instead of checking for <=0 (José).
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230626212221.136640-1-paulo.r.zanoni@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The SLPC code has a strict 5ms timeout from when the start command is
queued to when we expect the reply to appear in memory. This works if
the CT channel is empty, but if the channel is busy there might be an
extra delay that causes the process to exceeded the timeout. We see
this issue when a reset occurs while userspace keeps submitting,
because the submission code is re-enabled first and it will start using
the channel to service those submissions.
To fix this, we can simply start SLPC before re-enabling submission.
This has also the benefit of not allowing submissions to go through with
an uninitialized SLPC.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/375
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20230628001642.3170070-1-daniele.ceraolospurio@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
With the fake device creation fix in the previous patch,
adding Alderlake P platform in xe_wa_test.
With this, driver is able to run the kunit test for
ADLP properly.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230613174740.786041-2-anusha.srivatsa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For platform like Alderlake P there are subplatforms and
just Alderlake P. Unlike DG2 in which every flavour is
either a G10,G11 or G12 variant. In this case(Alderlake P/S),
the Kunit test evaluates the subplatform to NONE and is
unable to create a fake device. Removing the condition
in xe_pci_fake_device_init() to support this corner case
so driver can proceed with the unit testing.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230613174740.786041-1-anusha.srivatsa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Intel Discrete GFX cards gfx may have multiple PCIe endpoints,
they connects to root port via pcie upstream switch port(USP)
and virtual pcie switch port(VSP), sometimes VSP pcie devices
doesn't bind to pcieport driver. Without pcieport driver, pcie PM
comes without any warranty and with unbounded VSP gfx card won't
transition to low power pcie Device and Link states therefore
assert drm_warn on unbounded VSP and disable xe driver
PM support.
v2:
- Disable Xe PCI PM support. [Rodrigo]
v3:
- Changed subject and Rebase.
v4:
- %s/xe_pci_unbounded_bridge_disable_pm/xe_assert_on_unbounded_bridge.
[Rodrigo]
- Use device_set_pm_not_required() instead of dev_pm_ops NULL assignment.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230524090653.1192566-1-anshuman.gupta@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The main difference is that we don't bounce and sync on eviction, allowing
for pipelined eviction. Moving forward we also need to be careful with
dma mappings which can be released in SYSTEM but may remain in TT.
v2:
- Remove a stale comment (Matthew Brost)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230626181741.32820-5-thomas.hellstrom@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The function ttm_bo_move_accel_cleanup() attempts to help pipeline a
move, and in doing so, needs memory allocations which may fail.
Rather than failing in a state where the new resource may freed while
accessed by the copy engine, sync uninterruptible and do a failsafe
cleanup.
v2:
- Don't try to attach the signaled fence on ttm_bo_move_accel_cleanup()
error.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230626181741.32820-4-thomas.hellstrom@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When creating a new bo, on the first move the bo->resource is typically
NULL. Our move callback rejected that instructing TTM to create a system
resource. In addition a struct ttm_tt with a page-vector was created,
although not populated with pages. Similarly when the clearing of VRAM
was complete, the system resource was put on a ghost object and freed
using the TTM delayed destroy mechanism.
This is a lot of pointless work. So avoid creating the system resource and
instead change the code to cope with a NULL bo->resource.
v2:
- Add some code comments (Matthew Brost)
v3:
- Fix a dereference of old_mem which might be NULL.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230626181741.32820-3-thomas.hellstrom@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
