IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
HPD event after fbdev unregistration can cause registration of deferred
fbdev which will not be unregistered later, causing use-after-free.
To avoid it HPD handling should be suspended before fbdev unregistration.
It should fix following GPF:
[272.634530] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP NOPTI
[272.634536] CPU: 0 PID: 6030 Comm: i915_selftest Tainted: G U 5.18.0-rc5-CI_DRM_11603-g12dccf4f5eef+ #1
[272.634541] Hardware name: Intel Corporation Raptor Lake Client Platform/RPL-S ADP-S DDR5 UDIMM CRB, BIOS RPLSFWI1.R00.2397.A01.2109300731 09/30/2021
[272.634545] RIP: 0010:fb_do_apertures_overlap.part.14+0x26/0x60
...
[272.634582] Call Trace:
[272.634583] <TASK>
[272.634585] do_remove_conflicting_framebuffers+0x59/0xa0
[272.634589] remove_conflicting_framebuffers+0x2d/0xc0
[272.634592] remove_conflicting_pci_framebuffers+0xc8/0x110
[272.634595] drm_aperture_remove_conflicting_pci_framebuffers+0x52/0x70
[272.634604] i915_driver_probe+0x63a/0xdd0 [i915]
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5329
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5510
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220826141929.189681-3-andrzej.hajda@intel.com
i915->hotplug.dig_port_work can be queued from intel_hpd_irq_handler
called by IRQ handler or by intel_hpd_trigger_irq called from dp_mst.
Since dp_mst is suspended after irq handler uninstall, a cleaner approach
is to cancel hpd work after intel_dp_mst_suspend, otherwise we risk
use-after-free.
It should fix following WARNINGS:
[283.405824] cpu_latency_qos_update_request called for unknown object
[283.405866] WARNING: CPU: 2 PID: 240 at kernel/power/qos.c:296 cpu_latency_qos_update_request+0x2d/0x100
[283.405912] CPU: 2 PID: 240 Comm: kworker/u64:9 Not tainted 5.18.0-rc6-Patchwork_103738v3-g1672d1c43e43+ #1
[283.405915] Hardware name: Intel Corporation Raptor Lake Client Platform/RPL-S ADP-S DDR5 UDIMM CRB, BIOS RPLSFWI1.R00.2397.A01.2109300731 09/30/2021
[283.405916] Workqueue: i915-dp i915_digport_work_func [i915]
[283.406020] RIP: 0010:cpu_latency_qos_update_request+0x2d/0x100
...
[283.406040] Call Trace:
[283.406041] <TASK>
[283.406044] intel_dp_aux_xfer+0x60e/0x8e0 [i915]
[283.406131] ? finish_swait+0x80/0x80
[283.406139] intel_dp_aux_transfer+0xc5/0x2b0 [i915]
[283.406218] drm_dp_dpcd_access+0x79/0x130 [drm_display_helper]
[283.406227] drm_dp_dpcd_read+0xe2/0xf0 [drm_display_helper]
[283.406233] intel_dp_hpd_pulse+0x134/0x570 [i915]
[283.406308] ? __down_killable+0x70/0x140
[283.406313] i915_digport_work_func+0xba/0x150 [i915]
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4586
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5558
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220826141929.189681-2-andrzej.hajda@intel.com
The VBT gained some bits to inidicate the max FRL rate for
HDMI 2.1, define them.
These just outright replaced the slave_port bits for ganged eDP.
Apparently that feature was never actually used so someone decided
that reusing the bits is fine. Although the actual ganged eDP
enable bit was still left defined elsewhere for some reason.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220715202044.11153-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use a more standard form for the VT version number comments.
One slight oddball case is the dp_max_link_rate that had two
version numbers (216/230) and a platform name (GLK). The
story goes that the field was introduced in the spec in
version 216, along with a note that it's used on CNL+. Later
in version 230 the definition of the bit was changed in
bacakwards incompatible ways and the CNL note disappeard.
For us the original CNL+ note in the header got changed to
to GLK+ when all CNL support was dropped from the codebase.
We do still need (and have) handling for both the 216+ and
the 230+ defintions (parse_bdb_216_dp_max_link_rate() vs.
parse_bdb_230_dp_max_link_rate()).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220715202044.11153-2-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
A lot of modern laptops use the Parade PS8461E MUX for eDP
switching. The MUX can operate in jitter cleaning mode or
redriver mode, the first one resulting in higher link
quality. The jitter cleaning mode needs to know the link
rate used and the MUX achieves this by snooping the
LINK_BW_SET, LINK_RATE_SELECT and SUPPORTED_LINK_RATES
DPCD accesses.
When the MUX is powered down (seems this can happen whenever
the display is turned off) it loses track of the snooped
link rates so when we do the LINK_RATE_SELECT write it no
longer knowns which link rate we're selecting, and thus it
falls back to the lower quality redriver mode. This results
in unstable high link rates (eg. usually 8.1Gbps link rate
no longer works correctly).
In order to avoid all that let's re-snoop SUPPORTED_LINK_RATES
from the sink at the start of every link training.
Unfortunately we don't have a way to detect the presence of
the MUX. It looks like the set of laptops equipped with this
MUX is fairly large and contains devices from multiple
manufacturers. It may also still be growing with new models.
So a quirk doesn't seem like a very easily maintainable
option, thus we shall attempt to do this unconditionally on
all machines that use LINK_RATE_SELECT. Hopefully this extra
DPCD read doesn't cause issues for any unaffected machine.
If that turns out to be the case we'll need to convert this
into a quirk in the future.
Cc: stable@vger.kernel.org
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6205
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220902070319.15395-1-ville.syrjala@linux.intel.com
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The current scheme for generating the LFP data table pointers
(when the block including them is missing from the VBT) expects
the 0xffff sequence to only appear in the fp_timing terminator
entries. However some VBTs also have extra 0xffff sequences
elsewhere in the LFP data. When looking for the terminators
we may end up finding those extra sequeneces insted, which means
we deduce the wrong size for the fp_timing table. The code
then notices the inconsistent looking values and gives up on
the generated data table pointers, preventing us from parsing
the LFP data table entirely.
Let's give up on the "search for the terminators" approach
and instead just hardcode the expected size for the fp_timing
table.
We have enough sanity checks in place to make sure we
shouldn't end up parsing total garbage even if that size
should change in the future (although that seems unlikely
as the fp_timing and dvo_timing tables have been declared
obsolete as of VBT version 229).
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6592
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220818192223.29881-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
While executing i915_selftest, wakeref imbalance warning is seen
with i915_selftest failure.
Currently when Driver is suspended, while doing unregister
it is taking wakeref without resuming the device.
This patch is resuming the device, if driver is already suspended
and doing unregister process.
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220830085158.577157-1-mitulkumar.ajitkumar.golani@intel.com
On some systems the panel reports alternate modes with
different blanking periods. If the EDID reports them and VBT
doesn't tell us otherwise then I can't really see why they
should be rejected. So allow their use for the purposes of
static DRRS.
For seamless DRRS we still require a much more exact match
of course. But that logic only kicks in when selecting the
downclock mode (or in the future when determining whether
we can do a seamless refresh rate change due to a user
modeset).
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6374
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220830212436.2021-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Turns out the MIPI sequence block version number and
new block size fields are considered part of the block
header and are not included in the reported new block size
field itself. Bump up the block size appropriately so that
we'll copy over the last five bytes of the block as well.
For this particular machine those last five bytes included
parts of the GPIO op for the backlight on sequence, causing
the backlight no longer to turn back on:
Sequence 6 - MIPI_SEQ_BACKLIGHT_ON
Delay: 20000 us
- GPIO index 0, number 0, set 0 (0x00)
+ GPIO index 1, number 70, set 1 (0x01)
Cc: stable@vger.kernel.org
Fixes: e163cfb4c96d ("drm/i915/bios: Make copies of VBT data blocks")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6652
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220829135834.8585-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Avoid BUG_ON(). We don't have such checks on output type anywhere else
either, so just remove.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220830093411.1511040-1-jani.nikula@intel.com
Move display frontbuffer tracking related members under drm_i915_private
display sub-struct.
Rename struct i915_frontbuffer_tracking to intel_frontbuffer_tracking
while at it.
FIXME: fb_tracking.lock mutex init should be moved away from
i915_gem_init_early().
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a5444d0a373afca46da9a2f6e4db442af21b429b.1661779055.git.jani.nikula@intel.com
