IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
An include of linux/ctype.h was added in commit 1323061a01
("net: phy: sfp: Add HWMON support for module sensors") but nothing
was used from this header file. Remove this unnecessary include.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nothing in the sfp code now references anything from the ACPI header,
everything is done via fwnode APIs, so get rid of this header.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's nothing DT specific about the gpio_of_names array, let's drop
the _of infix.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than using of_match_node() to get the matching of_device_id
to then retrieve the match data, use device_get_match_data() instead
to avoid firmware specific functions, and free the driver from having
firmware specific code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the newly introduced i2c_get_adapter_by_fwnode() API, so that we
can retrieve the I2C adapter in a firmware independent manner once we
have the fwnode handle for the adapter.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Walle says:
====================
net: phy: Remove probe_capabilities
With all the drivers which used .probe_capabilities converted to the
new c45 MDIO access methods, we can now decide based upon these whether
a bus driver supports c45 and we can get rid of the not widely used
probe_capabilites.
Unfortunately, due to a now broader support of c45 scans, this will
trigger a bug on some boards with a (c22-only) Micrel PHY. These PHYs
don't ignore c45 accesses correctly, thinking they are addressed
themselves and distrupt the MDIO access. To avoid this, a blacklist
for c45 scans is introduced.
====================
Link: https://lore.kernel.org/r/20230116-net-next-remove-probe-capabilities-v2-0-15513b05e1f4@walle.cc
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Deciding if to probe of PHYs using C45 is now determine by if the bus
provides the C45 read method. This makes probe_capabilities redundant
so remove it.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some PHYs provide invalid IDs in C22 space. If C45 is supported on the
bus an attempt can be made to get the IDs from the C45 space. Decide
on this based on the presence of the C45 read method in the bus
structure. This will allow the unreliable probe_capabilities to be
removed.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that all MDIO bus drivers which set probe_capabilities to
MDIOBUS_C22_C45 have been converted to use the name API for C45
transactions, perform the scanning of the bus based on which methods
the bus provides.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After scanning the bus for C22 devices, check if any Micrel PHYs have
been found. They are known to do bad things if there are C45
transactions on the bus. Prevent the scanning of the bus using C45 if
such a PHY has been detected.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some C22 PHYs do bad things when there are C45 transactions on the
bus. In order to handle this, the bus needs to be scanned first for
C22 at all addresses, and then C45 scanned for all addresses.
The Marvell pxa168 driver scans a specific address on the bus to find
its PHY. This is a C22 only device, so update it to use the c22
helper.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
No functional change, just place it earlier in preparation for some
refactoring.
While at it, correct the comment format and one typo.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pavithra Sathyanarayanan says:
====================
generic implementation of phy interface and fixed_phy support for the LAN743x device
This patch series includes the following changes:
- Remove the unwanted interface settings in the LAN743x driver as
it is preset in EEPROM configurations.
- Handle generic implementation for the phy interfaces for different
devices LAN7430/31 and pci11x1x.
- Add new feature for fixed_phy support at 1Gbps full duplex for the
LAN7431 device if a phy not found over MDIO. Includes support for
communication between a MAC in a LAN7431 device and custom phys
without an MDIO interface.
====================
Link: https://lore.kernel.org/r/20230117141614.4411-1-Pavithra.Sathyanarayanan@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add fixed_phy support at 1Gbps full duplex for the lan7431 device
if a phy not found over MDIO. Tested with a MAC to MAC connection
from LAN7431 to a KSZ9893 switch. This avoids the Driver open error
in LAN743x. TX delay and internal CLK125 generation is already
enabled in EEPROM.
Signed-off-by: Pavithra Sathyanarayanan <Pavithra.Sathyanarayanan@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add logic to read the Phy interface from MAC_CR register for LAN743x
driver.
Checks for the LAN7430/31 or pci11x1x devices and the adapter
interface is updated accordingly. For LAN7431, adapter interface is set
based on Bit 19 of MAC_CR register as MII or RGMII which removes the
forced RGMII/GMII configurations in lan743x_phy_open().
Signed-off-by: Pavithra Sathyanarayanan <Pavithra.Sathyanarayanan@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove the MII/RGMII Selection settings in driver as it is preset
by the EEPROM and has the required configurations before the driver
loads for LAN743x.
Signed-off-by: Pavithra Sathyanarayanan <Pavithra.Sathyanarayanan@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are some issues with the bpf/nat6to4.c building.
1. It use TEST_CUSTOM_PROGS, which will add the nat6to4.o to
kselftest-list file and run by common run_tests.
2. When building the test via `make -C tools/testing/selftests/
TARGETS="net"`, the nat6to4.o will be build in selftests/net/bpf/
folder. But in test udpgro_frglist.sh it refers to ../bpf/nat6to4.o.
The correct path should be ./bpf/nat6to4.o.
3. If building the test via `make -C tools/testing/selftests/ TARGETS="net"
install`. The nat6to4.o will be installed to kselftest_install/net/
folder. Then the udpgro_frglist.sh should refer to ./nat6to4.o.
To fix the confusing test path, let's just move the nat6to4.c to net folder
and build it as TEST_GEN_FILES.
Fixes: edae34a3ed ("selftests net: add UDP GRO fraglist + bpf self-tests")
Tested-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20230118020927.3971864-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Vladimir Oltean says:
====================
ENETC BD ring cleanup
The highlights of this patch set are:
- Installing a BPF program and changing PTP RX timestamping settings are
currently implemented through a port reconfiguration procedure which
triggers an AN restart on the PHY, and these procedures are not
generally guaranteed to leave the port in a sane state. Patches 9/12
and 11/12 address that.
- Attempting to put the port down (or trying to reconfigure it) has the
driver oppose some resistance if it's bombarded with RX traffic
(it won't go down). Patch 12/12 addresses that.
The other 9 patches are just cleanup in the BD ring setup/teardown code,
which gradually led to bringing the driver in a position where resolving
those 2 issues was possible.
====================
Link: https://lore.kernel.org/r/20230117230234.2950873-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
napi_synchronize() from enetc_stop() waits until the softirq has
finished execution and no longer wants to be rescheduled. However under
high traffic load, this will never happen, and the interface can never
be closed.
The problem is the fact that the NAPI poll routine is written to update
the consumer index which makes the device want to put more buffers in
the RX ring, which restarts the madness again.
Browsing around, it seems that some drivers like i40e keep a bit
(__I40E_VSI_DOWN) which they use as communication between the control
path and the data path. But that isn't my first choice, because
complications ensue - since the enetc hardirq may trigger while we are
in a theoretical ENETC_DOWN state, it may happen that enetc_msix() masks
it, but enetc_poll() never unmasks it. To prevent a stall in that case,
one would need to schedule all NAPI instances when ENETC_DOWN gets
cleared, to process what's pending.
I find it more desirable for the control path - enetc_stop() - to just
quiesce the RX ring and let the softirq finish what remains there,
without any explicit communication, just by making hardware not provide
any more packets.
This seems possible with the Enable bit of the RX BD ring (RBaMR[EN]).
I can't seem to find an exact definition of what this bit does, but when
the RX ring is disabled, the port seems to no longer update the producer
index, and not react to software updates of the consumer index.
In fact, the RBaMR[EN] bit is already toggled by the driver, but too
late for what we want:
enetc_close()
-> enetc_stop()
-> napi_synchronize()
-> enetc_clear_bdrs()
-> enetc_clear_rxbdr()
The enetc_clear_bdrs() function contains not only logic to disable the
RX and TX rings, but also logic to wait for the TX ring stop being busy.
We split enetc_clear_bdrs() into enetc_disable_bdrs() and
enetc_wait_bdrs(). One needs to run before napi_synchronize() and the
other after (NAPI also processes TX completions, so we maximize our
chances of not waiting for the ENETC_TBSR_BUSY bit - unless a packet is
stuck for some reason, ofc).
We also split off enetc_enable_bdrs() from enetc_setup_bdrs(), and call
this from the mirror position in enetc_start() compared to enetc_stop(),
i.e. right before netif_tx_start_all_queues().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Offloading a BPF program to the RX path of the driver suffers from the
same problems as the PTP reconfiguration - improper error checking can
leave the driver in an invalid state, and the link on the PHY is lost.
Reuse the enetc_reconfigure() procedure, but here, we need to run some
code in the middle of the ring reconfiguration procedure - while the
interface is still down. Introduce a callback which makes that possible.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Follow the convention from this driver, which is to name "struct
net_device *" as "ndev", and the convention from other drivers, to name
"struct netdev_bpf *" as "bpf".
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The crude enetc_stop() -> enetc_open() mechanism suffers from 2
problems:
1. improper error checking
2. it involves phylink_stop() -> phylink_start() which loses the link
Right now, the driver is prepared to offer a better alternative: a ring
reconfiguration procedure which takes the RX BD size (normal or
extended) as argument. It allocates new resources (failing if that
fails), stops the traffic, and assigns the new resources to the rings.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We want to introduce a fast interface reconfiguration procedure, which
involves temporarily stopping the rings.
But we want enetc_start() and enetc_stop() to not restart PHY autoneg,
because that can take a few seconds until it completes again.
So we need part of enetc_start() and enetc_stop(), but not all of them.
Move phylink_start() right next to phylink_of_phy_connect(), and
phylink_stop() right next to phylink_disconnect_phy(), both still in
ndo_open() and ndo_stop().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have a few instances in the enetc driver where the ring resources
(BD ring iomem, software BD ring, software TSO headers, basically
everything except RX buffers) need to be reallocated. For example, when
RX timestamping is enabled, the RX BD format changes to an extended one
(twice as large).
Currently, this is done using a simplistic enetc_close() -> enetc_open()
procedure. But this is quite crude, since it also invokes phylink_stop()
-> phylink_start(), the link is lost, and a few seconds need to pass for
autoneg to complete again.
In fact it's bad also due to the improper (yolo) error checking. In case
we fail to allocate new resources, we've already freed the old ones, so
the interface is more or less stuck.
To avoid that, we need a system where reconfiguration is possible in a
way in which resources are allocated upfront. This means that there will
be a higher memory usage temporarily, but the assignment of resources to
rings can be done when both the old and new resources are still available.
Introduce a struct enetc_bdr_resource which holds the resources for a
ring, be it RX or TX. This structure duplicates a lot of fields from
struct enetc_bdr (and access to the same fields in the ring structure
was left duplicated, to not change cache characteristics in the fast
path).
When enetc_alloc_tx_resources() runs, it returns an array of resource
elements (one per TX ring), in addition to the existing priv->tx_res.
To populate priv->tx_res with that array, one must call
enetc_assign_tx_resources(), and this also frees the old resources.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extended RX buffer descriptors are necessary if they carry RX
timestamps, which will be true when PTP timestamping is enabled.
Right now, the rx_ring->ext_en is set from the function that allocates
ring resources (enetc_alloc_rx_resources() -> enetc_alloc_rxbdr()), and
also used later, in enetc_setup_rxbdr(). It is also used in the
enetc_rxbd() and enetc_rxbd_next() fast path helpers.
We want to decouple resource allocation from BD ring setup, but both
procedures depend on BD size (extended or not). Move the "extended"
boolean to enetc_open() and pass it both to the RX allocation procedure
as well as to the RX ring setup procedure. The latter will set
rx_ring->ext_en from now on.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The call path in enetc_close() is:
enetc_close()
-> enetc_free_rxtx_rings()
-> enetc_free_tx_ring()
-> enetc_free_tx_frame()
-> enetc_free_tx_resources()
-> enetc_free_txbdr()
-> enetc_free_tx_frame()
The enetc_free_tx_frame() function is written such that the second call
exits without doing anything, but nonetheless, it is completely
redundant. Delete it. This makes the TX teardown path more similar to
the RX one, where rx_swbd freeing is done in enetc_free_rx_ring(), not
in enetc_free_rxbdr().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The call path in enetc_close() is:
enetc_close()
-> enetc_free_rxtx_rings()
-> enetc_free_rx_ring()
-> tests whether rx_ring->rx_swbd is NULL
-> enetc_free_tx_ring()
-> tests whether tx_ring->tx_swbd is NULL
-> enetc_free_rx_resources()
-> enetc_free_rxbdr()
-> sets rxr->rx_swbd to NULL
-> enetc_free_tx_resources()
-> enetc_free_txbdr()
-> setx txr->tx_swbd to NULL
From the above, it is clear that due to the function ordering, the
checks for NULL are redundant, since the software buffer descriptor
arrays have not yet been set to NULL. Drop these checks.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a refactoring change which introduces the opposite function of
enetc_dma_alloc_bdr().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is only one place which needs to set up indices in the RX ring.
Be consistent with what was done in the TX path and do this in
enetc_setup_rxbdr().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
enetc_alloc_txbdr() deals with allocating resources necessary for a TX
ring to work (the array of software BDs and the array of TSO headers).
The next_to_clean and next_to_use pointers are overwritten with proper
values which are read from hardware here:
enetc_open
-> enetc_alloc_tx_resources
-> enetc_alloc_txbdr
-> set to zero
-> enetc_setup_bdrs
-> enetc_setup_txbdr
-> read from hardware
So their initialization with zeroes is pointless and confusing.
Delete it.
Consequently, since enetc_setup_txbdr() has no opposite cleanup
function, also delete the resetting of these indices from
enetc_free_tx_ring().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steen Hegelund says:
====================
sparx5: Improve locking in the VCAP API
This improves the VCAP cache and the VCAP rule list protection against
access from different sources.
The VCAP Admin lock protects the list of rules for the VCAP instance as
well as the cache used for encoding and decoding rules.
This series provides dedicated functions for accessing rule statistics,
decoding rule content, verifying if a rule exists and getting a rule with
the lock held, as well as ensuring the use of the lock when the list of
rules or the cache is accessed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ensure that the KUNIT tests lock instance is initialized before the test is
executed.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This improves the VCAP cache and the VCAP rule list protection against
access from different sources.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This ensures that the admin lock is taken before the debugFS functions
starts iterating the VCAP rules.
It also adds a separate function to decode a rule, which expects the lock
to have been taken before it is called.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new function that just checks if the VCAP rule id is already used by
an existing rule.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for TC clients to get the packet count for a TC filter
identified by its cookie.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The rtl8152_cfgselector_probe() should set the USB configuration to the
vendor mode only for the devices which the driver (r8152) supports.
Otherwise, no driver would be used for such devices.
Fixes: ec51fbd1b8 ("r8152: add USB device driver for config selection")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This driver was capturing the TX timestamp values from the TX ring
during the TX completion path, but deferring the actual packet TX
timestamp updating to a workqueue. There does not seem to be much of a
reason for this with the current state of the driver. Simplify this to
just do the TX timestamping as part of the TX completion path, to avoid
the need for the extra timestamp buffer and workqueue.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
virtnet_rq_free_unused_buf() helper function to free the buffer
already exists. Avoid code duplication by reusing existing function.
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal says:
====================
Netfilter updates for net-next
following patch set includes netfilter updates for your *net-next* tree.
1. Replace pr_debug use with nf_log infra for debugging in sctp
conntrack.
2. Remove pr_debug calls, they are either useless or we have better
options in place.
3. Avoid repeated load of ct->status in some spots.
Some bit-flags cannot change during the lifeetime of
a connection, so no need to re-fetch those.
4. Avoid uneeded nesting of rcu_read_lock during tuple lookup.
5. Remove the CLUSTERIP target. Marked as obsolete for years,
and we still have WARN splats wrt. races of the out-of-band
/proc interface installed by this target.
6. Add static key to nf_tables to avoid the retpoline mitigation
if/else if cascade provided the cpu doesn't need the retpoline thunk.
7. add nf_tables objref calls to the retpoline mitigation workaround.
8. Split parts of nft_ct.c that do not need symbols exported by
the conntrack modules and place them in nf_tables directly.
This allows to avoid indirect call for 'ct status' checks.
9. Add 'destroy' commands to nf_tables. They are identical
to the existing 'delete' commands, but do not indicate
an error if the referenced object (set, chain, rule...)
did not exist, from Fernando.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Gerhard Engleder says:
====================
tsnep: XDP support
Implement XDP support for tsnep driver. I tried to follow existing
drivers like igb/igc as far as possible. Some prework was already done
in previous patch series, so in this series only actual XDP stuff is
included.
Thanks for the NetDev 0x14 slides "Add XDP support on a NIC driver".
Some commits contain changes not related to XDP but found during review
of XDP support patches.
v5:
- fix spelling of 'subtract' in commit message (Alexander Duyck)
- call txq_trans_cond_update() only if TX is complete (Alexander Duyck)
- remove const from static functions (Alexander Duyck)
- replace TX spin_lock with __netif_tx_lock (Alexander Duyck)
- use xdp_return_frame_rx_napi() instead of xdp_return_frame_bulk() (Alexander Duyck)
- eliminate __TSNEP_DOWN (Alexander Duyck)
- introduce single function for xdp_rxq and napi init (Alexander Duyck)
- use TX queue of pair instead of expensive processor id modulo for XDP_TX (Alexander Duyck)
- eliminate processor id modulo in tsnep_netdev_xdp_xmit (Alexander Duyck)
- use bitmap for TX type and add fragment type (Alexander Duyck)
- always use XDP_PACKET_HEADROOM and DMA_BIDIRECTIONAL
v4:
- remove process context from spin_lock_bh commit message (Alexander Lobakin)
- move tsnep_adapter::state to prevent 4 byte hole (Alexander Lobakin)
- braces for bitops in combination logical ops (Alexander Lobakin)
- make various pointers const (Alexander Lobakin)
- '!i' instead of 'i == 0' (Alexander Lobakin)
- removed redundant braces (Alexander Lobakin)
- squash variables into same line if same type (Alexander Lobakin)
- use fact that ::skb and ::xdpf use same slot for simplification (Alexander Lobakin)
- use u32 for smp_processor_id() (Alexander Lobakin)
- don't add $(tsnep-y) to $(tsnep-objs) (Alexander Lobakin)
- use rev xmas tree in tsnep_netdev_open() (Alexander Lobakin)
- do not move tsnep_queue::napi (Alexander Lobakin)
- call xdp_init_buff() only once (Alexander Lobakin)
- get nq and tx only once for XDP TX (Alexander Lobakin)
- move XDP BPF program setup to end of patch series (Alexander Lobakin)
- check for XDP state change and prevent redundant down-ups (Alexander Lobakin)
- access tsnep_adapter::xdp_prog only with READ_ONCE in RX path (Alexander Lobakin)
- forward NAPI budget to napi_consume_skb() (Alexander Lobakin)
- fix errno leftover in tsnep_xdp_xmit_back() (Dan Carpenter)
- eliminate tsnep_xdp_is_enabled() by setting RX offset during init
v3:
- use spin_lock_bh for TX (Paolo Abeni)
- add comment for XDP TX descriptor available check (Maciej Fijalkowski)
- return value bool for tsnep_xdp_xmit_frame_ring() (Saeed Mahameed)
- do not print DMA mapping error (Saeed Mahameed)
- use reverse xmas tree variable declaration (Saeed Mahameed)
- move struct xdp_rxq_info to end of struct tsnep_rx (Maciej Fijalkowski)
- check __TSNEP_DOWN flag on close to prevent double free (Saeed Mahameed)
- describe TSNEP_RX_INLINE_METADATA_SIZE in comment (Maciej Fijalkowski)
- substract TSNEP_RX_INLINE_METADATA_SIZE after DMA sync (Maciej Fijalkowski)
- use enum tsnep_tx_type for tsnep_xdp_tx_map (Saeed Mahameed)
- use nxmit as loop iterator in tsnep_netdev_xdp_xmit (Saeed Mahameed)
- stop netdev in tsnep_netdev_close() which is called during BPF prog setup
v2:
- move tsnep_xdp_xmit_back() to commit where it is used (Paolo Abeni)
- remove inline from tsnep_rx_offset() (Paolo Abeni)
- remove inline from tsnep_rx_offset_xdp() (Paolo Abeni)
- simplify tsnep_xdp_run_prog() call by moving xdp_status update to it (Paolo Abeni)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement setup of BPF programs for XDP RX path with command
XDP_SETUP_PROG of ndo_bpf(). This is the final step for XDP RX path
support.
There is no need to reinit the RX queues as they are always prepared for
XDP.
Additionally remove $(tsnep-y) from $(tsnep-objs) because it is added
automatically.
Test results with A53 1.2GHz:
XDP_DROP (samples/bpf/xdp1)
proto 17: 883878 pkt/s
XDP_TX (samples/bpf/xdp2)
proto 17: 255693 pkt/s
XDP_REDIRECT (samples/bpf/xdpsock)
sock0@eth2:0 rxdrop xdp-drv
pps pkts 1.00
rx 855,582 5,404,523
tx 0 0
XDP_REDIRECT (samples/bpf/xdp_redirect)
eth2->eth1 613,267 rx/s 0 err,drop/s 613,272 xmit/s
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If BPF program is set up, then run BPF program for every received frame
and execute the selected action.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Register xdp_rxq_info with page_pool memory model. This is needed for
XDP buffer handling.
Additionally fix error path by removing call of tsnep_phy_close() after
failed tsnep_phy_open().
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Always reserve XDP_PACKET_HEADROOM in front of RX buffer. Similar DMA
direction is always set to DMA_BIDIRECTIONAL. This eliminates the need
for RX queue reconfiguration during BPF program setup. The RX queue is
always prepared for XDP.
No negative impact of DMA_BIDIRECTIONAL was measured.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subtract size of metadata in front of received data only once. This
simplifies the RX code.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement ndo_xdp_xmit() for XDP TX support. Support for fragmented XDP
frames is included.
Also some braces and logic cleanups are done in normal TX path to keep
both TX paths in sync.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Printing in data path shall be avoided. DMA mapping error is already
counted in stats so printing is not necessary.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NAPI budget must be forwarded to napi_consume_skb(). It is used to
detect non-NAPI context.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
