f8f24a5241
8853 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Heiko Carstens
|
1ecf7bd9c2 |
s390: update defconfigs
Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Heiko Carstens
|
42400d99e9 |
KVM: s390: interrupt: use READ_ONCE() before cmpxchg()
Use READ_ONCE() before cmpxchg() to prevent that the compiler generates code that fetches the to be compared old value several times from memory. Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20230109145456.2895385-1-hca@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Heiko Carstens
|
e3f360db08 |
s390/percpu: add READ_ONCE() to arch_this_cpu_to_op_simple()
Make sure that *ptr__ within arch_this_cpu_to_op_simple() is only dereferenced once by using READ_ONCE(). Otherwise the compiler could generate incorrect code. Cc: <stable@vger.kernel.org> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Heiko Carstens
|
82d3edb50a |
s390/cpum_sf: add READ_ONCE() semantics to compare and swap loops
The current cmpxchg_double() loops within the perf hw sampling code do not
have READ_ONCE() semantics to read the old value from memory. This allows
the compiler to generate code which reads the "old" value several times
from memory, which again allows for inconsistencies.
For example:
/* Reset trailer (using compare-double-and-swap) */
do {
te_flags = te->flags & ~SDB_TE_BUFFER_FULL_MASK;
te_flags |= SDB_TE_ALERT_REQ_MASK;
} while (!cmpxchg_double(&te->flags, &te->overflow,
te->flags, te->overflow,
te_flags, 0ULL));
The compiler could generate code where te->flags used within the
cmpxchg_double() call may be refetched from memory and which is not
necessarily identical to the previous read version which was used to
generate te_flags. Which in turn means that an incorrect update could
happen.
Fix this by adding READ_ONCE() semantics to all cmpxchg_double()
loops. Given that READ_ONCE() cannot generate code on s390 which atomically
reads 16 bytes, use a private compare-and-swap-double implementation to
achieve that.
Also replace cmpxchg_double() with the private implementation to be able to
re-use the old value within the loops.
As a side effect this converts the whole code to only use bit fields
to read and modify bits within the hws trailer header.
Reported-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/linux-s390/Y71QJBhNTIatvxUT@osiris/T/#ma14e2a5f7aa8ed4b94b6f9576799b3ad9c60f333
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
||
Alexander Egorenkov
|
c2337a40e0 |
s390/kexec: fix ipl report address for kdump
This commit addresses the following erroneous situation with file-based
kdump executed on a system with a valid IPL report.
On s390, a kdump kernel, its initrd and IPL report if present are loaded
into a special and reserved on boot memory region - crashkernel. When
a system crashes and kdump was activated before, the purgatory code
is entered first which swaps the crashkernel and [0 - crashkernel size]
memory regions. Only after that the kdump kernel is entered. For this
reason, the pointer to an IPL report in lowcore must point to the IPL report
after the swap and not to the address of the IPL report that was located in
crashkernel memory region before the swap. Failing to do so, makes the
kdump's decompressor try to read memory from the crashkernel memory region
which already contains the production's kernel memory.
The situation described above caused spontaneous kdump failures/hangs
on systems where the Secure IPL is activated because on such systems
an IPL report is always present. In that case kdump's decompressor tried
to parse an IPL report which frequently lead to illegal memory accesses
because an IPL report contains addresses to various data.
Cc: <stable@vger.kernel.org>
Fixes:
|
||
Masahiro Yamada
|
f993d24a94 |
s390: fix -Wundef warning for CONFIG_KERNEL_ZSTD
Since commit
|
||
|
Masahiro Yamada
|
a494398bde |
s390: define RUNTIME_DISCARD_EXIT to fix link error with GNU ld < 2.36
Nathan Chancellor reports that the s390 vmlinux fails to link with GNU ld < 2.36 since commit |
||
Alexander Gordeev
|
45d619bdaf |
s390: expicitly align _edata and _end symbols on page boundary
Symbols _edata and _end in the linker script are the only unaligned expicitly on page boundary. Although _end is aligned implicitly by BSS_SECTION macro that is still inconsistent and could lead to a bug if a tool or function would assume that _edata is as aligned as others. For example, vmem_map_init() function does not align symbols _etext, _einittext etc. Should these symbols be unaligned as well, the size of ranges to update were short on one page. Instead of fixing every occurrence of this kind in the code and external tools just force the alignment on these two symbols. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
Niklas Schnelle
|
0d4d52361b |
s390/debug: add _ASM_S390_ prefix to header guard
Using DEBUG_H without a prefix is very generic and inconsistent with other header guards in arch/s390/include/asm. In fact it collides with the same name in the ath9k wireless driver though that depends on !S390 via disabled wireless support. Let's just use a consistent header guard name and prevent possible future trouble. Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
Jason A. Donenfeld
|
6bb20c152b |
random: do not include <asm/archrandom.h> from random.h
The <asm/archrandom.h> header is a random.c private detail, not something to be called by other code. As such, don't make it automatically available by way of random.h. Cc: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> |
||
Linus Torvalds
|
b8fd76f418 |
IOMMU Updates for Linux v6.2
Including:
- Core code:
- map/unmap_pages() cleanup
- SVA and IOPF refactoring
- Clean up and document return codes from device/domain
attachment code
- AMD driver:
- Rework and extend parsing code for ivrs_ioapic, ivrs_hpet
and ivrs_acpihid command line options
- Some smaller cleanups
- Intel driver:
- Blocking domain support
- Cleanups
- S390 driver:
- Fixes and improvements for attach and aperture handling
- PAMU driver:
- Resource leak fix and cleanup
- Rockchip driver:
- Page table permission bit fix
- Mediatek driver:
- Improve safety from invalid dts input
- Smaller fixes and improvements
- Exynos driver:
- Fix driver initialization sequence
- Sun50i driver:
- Remove IOMMU_DOMAIN_IDENTITY as it has not been working
forever
- Various other fixes
-----BEGIN PGP SIGNATURE-----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=ZM/m
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core code:
- map/unmap_pages() cleanup
- SVA and IOPF refactoring
- Clean up and document return codes from device/domain attachment
AMD driver:
- Rework and extend parsing code for ivrs_ioapic, ivrs_hpet and
ivrs_acpihid command line options
- Some smaller cleanups
Intel driver:
- Blocking domain support
- Cleanups
S390 driver:
- Fixes and improvements for attach and aperture handling
PAMU driver:
- Resource leak fix and cleanup
Rockchip driver:
- Page table permission bit fix
Mediatek driver:
- Improve safety from invalid dts input
- Smaller fixes and improvements
Exynos driver:
- Fix driver initialization sequence
Sun50i driver:
- Remove IOMMU_DOMAIN_IDENTITY as it has not been working forever
- Various other fixes"
* tag 'iommu-updates-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (74 commits)
iommu/mediatek: Fix forever loop in error handling
iommu/mediatek: Fix crash on isr after kexec()
iommu/sun50i: Remove IOMMU_DOMAIN_IDENTITY
iommu/amd: Fix typo in macro parameter name
iommu/mediatek: Remove unused "mapping" member from mtk_iommu_data
iommu/mediatek: Improve safety for mediatek,smi property in larb nodes
iommu/mediatek: Validate number of phandles associated with "mediatek,larbs"
iommu/mediatek: Add error path for loop of mm_dts_parse
iommu/mediatek: Use component_match_add
iommu/mediatek: Add platform_device_put for recovering the device refcnt
iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe()
iommu/vt-d: Use real field for indication of first level
iommu/vt-d: Remove unnecessary domain_context_mapped()
iommu/vt-d: Rename domain_add_dev_info()
iommu/vt-d: Rename iommu_disable_dev_iotlb()
iommu/vt-d: Add blocking domain support
iommu/vt-d: Add device_block_translation() helper
iommu/vt-d: Allocate pasid table in device probe path
iommu/amd: Check return value of mmu_notifier_register()
iommu/amd: Fix pci device refcount leak in ppr_notifier()
...
|
||
|
Linus Torvalds
|
8fa590bf34 |
ARM64:
* Enable the per-vcpu dirty-ring tracking mechanism, together with an option to keep the good old dirty log around for pages that are dirtied by something other than a vcpu. * Switch to the relaxed parallel fault handling, using RCU to delay page table reclaim and giving better performance under load. * Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping option, which multi-process VMMs such as crosvm rely on (see merge commit |
||
|
Linus Torvalds
|
e2ca6ba6ba |
MM patches for 6.2-rc1.
- More userfaultfs work from Peter Xu. - Several convert-to-folios series from Sidhartha Kumar and Huang Ying. - Some filemap cleanups from Vishal Moola. - David Hildenbrand added the ability to selftest anon memory COW handling. - Some cpuset simplifications from Liu Shixin. - Addition of vmalloc tracing support by Uladzislau Rezki. - Some pagecache folioifications and simplifications from Matthew Wilcox. - A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use it. - Miguel Ojeda contributed some cleanups for our use of the __no_sanitize_thread__ gcc keyword. This series shold have been in the non-MM tree, my bad. - Naoya Horiguchi improved the interaction between memory poisoning and memory section removal for huge pages. - DAMON cleanups and tuneups from SeongJae Park - Tony Luck fixed the handling of COW faults against poisoned pages. - Peter Xu utilized the PTE marker code for handling swapin errors. - Hugh Dickins reworked compound page mapcount handling, simplifying it and making it more efficient. - Removal of the autonuma savedwrite infrastructure from Nadav Amit and David Hildenbrand. - zram support for multiple compression streams from Sergey Senozhatsky. - David Hildenbrand reworked the GUP code's R/O long-term pinning so that drivers no longer need to use the FOLL_FORCE workaround which didn't work very well anyway. - Mel Gorman altered the page allocator so that local IRQs can remnain enabled during per-cpu page allocations. - Vishal Moola removed the try_to_release_page() wrapper. - Stefan Roesch added some per-BDI sysfs tunables which are used to prevent network block devices from dirtying excessive amounts of pagecache. - David Hildenbrand did some cleanup and repair work on KSM COW breaking. - Nhat Pham and Johannes Weiner have implemented writeback in zswap's zsmalloc backend. - Brian Foster has fixed a longstanding corner-case oddity in file[map]_write_and_wait_range(). - sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang Chen. - Shiyang Ruan has done some work on fsdax, to make its reflink mode work better under xfstests. Better, but still not perfect. - Christoph Hellwig has removed the .writepage() method from several filesystems. They only need .writepages(). - Yosry Ahmed wrote a series which fixes the memcg reclaim target beancounting. - David Hildenbrand has fixed some of our MM selftests for 32-bit machines. - Many singleton patches, as usual. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY5j6ZwAKCRDdBJ7gKXxA jkDYAP9qNeVqp9iuHjZNTqzMXkfmJPsw2kmy2P+VdzYVuQRcJgEAgoV9d7oMq4ml CodAgiA51qwzId3GRytIo/tfWZSezgA= =d19R -----END PGP SIGNATURE----- Merge tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - More userfaultfs work from Peter Xu - Several convert-to-folios series from Sidhartha Kumar and Huang Ying - Some filemap cleanups from Vishal Moola - David Hildenbrand added the ability to selftest anon memory COW handling - Some cpuset simplifications from Liu Shixin - Addition of vmalloc tracing support by Uladzislau Rezki - Some pagecache folioifications and simplifications from Matthew Wilcox - A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use it - Miguel Ojeda contributed some cleanups for our use of the __no_sanitize_thread__ gcc keyword. This series should have been in the non-MM tree, my bad - Naoya Horiguchi improved the interaction between memory poisoning and memory section removal for huge pages - DAMON cleanups and tuneups from SeongJae Park - Tony Luck fixed the handling of COW faults against poisoned pages - Peter Xu utilized the PTE marker code for handling swapin errors - Hugh Dickins reworked compound page mapcount handling, simplifying it and making it more efficient - Removal of the autonuma savedwrite infrastructure from Nadav Amit and David Hildenbrand - zram support for multiple compression streams from Sergey Senozhatsky - David Hildenbrand reworked the GUP code's R/O long-term pinning so that drivers no longer need to use the FOLL_FORCE workaround which didn't work very well anyway - Mel Gorman altered the page allocator so that local IRQs can remnain enabled during per-cpu page allocations - Vishal Moola removed the try_to_release_page() wrapper - Stefan Roesch added some per-BDI sysfs tunables which are used to prevent network block devices from dirtying excessive amounts of pagecache - David Hildenbrand did some cleanup and repair work on KSM COW breaking - Nhat Pham and Johannes Weiner have implemented writeback in zswap's zsmalloc backend - Brian Foster has fixed a longstanding corner-case oddity in file[map]_write_and_wait_range() - sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang Chen - Shiyang Ruan has done some work on fsdax, to make its reflink mode work better under xfstests. Better, but still not perfect - Christoph Hellwig has removed the .writepage() method from several filesystems. They only need .writepages() - Yosry Ahmed wrote a series which fixes the memcg reclaim target beancounting - David Hildenbrand has fixed some of our MM selftests for 32-bit machines - Many singleton patches, as usual * tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (313 commits) mm/hugetlb: set head flag before setting compound_order in __prep_compound_gigantic_folio mm: mmu_gather: allow more than one batch of delayed rmaps mm: fix typo in struct pglist_data code comment kmsan: fix memcpy tests mm: add cond_resched() in swapin_walk_pmd_entry() mm: do not show fs mm pc for VM_LOCKONFAULT pages selftests/vm: ksm_functional_tests: fixes for 32bit selftests/vm: cow: fix compile warning on 32bit selftests/vm: madv_populate: fix missing MADV_POPULATE_(READ|WRITE) definitions mm/gup_test: fix PIN_LONGTERM_TEST_READ with highmem mm,thp,rmap: fix races between updates of subpages_mapcount mm: memcg: fix swapcached stat accounting mm: add nodes= arg to memory.reclaim mm: disable top-tier fallback to reclaim on proactive reclaim selftests: cgroup: make sure reclaim target memcg is unprotected selftests: cgroup: refactor proactive reclaim code to reclaim_until() mm: memcg: fix stale protection of reclaim target memcg mm/mmap: properly unaccount memory on mas_preallocate() failure omfs: remove ->writepage jfs: remove ->writepage ... |
||
|
Linus Torvalds
|
75f4d9af8b |
iov_iter work; most of that is about getting rid of
direction misannotations and (hopefully) preventing
more of the same for the future.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCY5ZzQAAKCRBZ7Krx/gZQ
65RZAP4nTkvOn0NZLVFkuGOx8pgJelXAvrteyAuecVL8V6CR4AD40qCVY51PJp8N
MzwiRTeqnGDxTTF7mgd//IB6hoatAA==
=bcvF
-----END PGP SIGNATURE-----
Merge tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"iov_iter work; most of that is about getting rid of direction
misannotations and (hopefully) preventing more of the same for the
future"
* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
use less confusing names for iov_iter direction initializers
iov_iter: saner checks for attempt to copy to/from iterator
[xen] fix "direction" argument of iov_iter_kvec()
[vhost] fix 'direction' argument of iov_iter_{init,bvec}()
[target] fix iov_iter_bvec() "direction" argument
[s390] memcpy_real(): WRITE is "data source", not destination...
[s390] zcore: WRITE is "data source", not destination...
[infiniband] READ is "data destination", not source...
[fsi] WRITE is "data source", not destination...
[s390] copy_oldmem_kernel() - WRITE is "data source", not destination
csum_and_copy_to_iter(): handle ITER_DISCARD
get rid of unlikely() on page_copy_sane() calls
|
||
|
Linus Torvalds
|
268325bda5 |
Random number generator updates for Linux 6.2-rc1.
-----BEGIN PGP SIGNATURE-----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=QRhK
-----END PGP SIGNATURE-----
Merge tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Replace prandom_u32_max() and various open-coded variants of it,
there is now a new family of functions that uses fast rejection
sampling to choose properly uniformly random numbers within an
interval:
get_random_u32_below(ceil) - [0, ceil)
get_random_u32_above(floor) - (floor, U32_MAX]
get_random_u32_inclusive(floor, ceil) - [floor, ceil]
Coccinelle was used to convert all current users of
prandom_u32_max(), as well as many open-coded patterns, resulting in
improvements throughout the tree.
I'll have a "late" 6.1-rc1 pull for you that removes the now unused
prandom_u32_max() function, just in case any other trees add a new
use case of it that needs to converted. According to linux-next,
there may be two trivial cases of prandom_u32_max() reintroductions
that are fixable with a 's/.../.../'. So I'll have for you a final
conversion patch doing that alongside the removal patch during the
second week.
This is a treewide change that touches many files throughout.
- More consistent use of get_random_canary().
- Updates to comments, documentation, tests, headers, and
simplification in configuration.
- The arch_get_random*_early() abstraction was only used by arm64 and
wasn't entirely useful, so this has been replaced by code that works
in all relevant contexts.
- The kernel will use and manage random seeds in non-volatile EFI
variables, refreshing a variable with a fresh seed when the RNG is
initialized. The RNG GUID namespace is then hidden from efivarfs to
prevent accidental leakage.
These changes are split into random.c infrastructure code used in the
EFI subsystem, in this pull request, and related support inside of
EFISTUB, in Ard's EFI tree. These are co-dependent for full
functionality, but the order of merging doesn't matter.
- Part of the infrastructure added for the EFI support is also used for
an improvement to the way vsprintf initializes its siphash key,
replacing an sleep loop wart.
- The hardware RNG framework now always calls its correct random.c
input function, add_hwgenerator_randomness(), rather than sometimes
going through helpers better suited for other cases.
- The add_latent_entropy() function has long been called from the fork
handler, but is a no-op when the latent entropy gcc plugin isn't
used, which is fine for the purposes of latent entropy.
But it was missing out on the cycle counter that was also being mixed
in beside the latent entropy variable. So now, if the latent entropy
gcc plugin isn't enabled, add_latent_entropy() will expand to a call
to add_device_randomness(NULL, 0), which adds a cycle counter,
without the absent latent entropy variable.
- The RNG is now reseeded from a delayed worker, rather than on demand
when used. Always running from a worker allows it to make use of the
CPU RNG on platforms like S390x, whose instructions are too slow to
do so from interrupts. It also has the effect of adding in new inputs
more frequently with more regularity, amounting to a long term
transcript of random values. Plus, it helps a bit with the upcoming
vDSO implementation (which isn't yet ready for 6.2).
- The jitter entropy algorithm now tries to execute on many different
CPUs, round-robining, in hopes of hitting even more memory latencies
and other unpredictable effects. It also will mix in a cycle counter
when the entropy timer fires, in addition to being mixed in from the
main loop, to account more explicitly for fluctuations in that timer
firing. And the state it touches is now kept within the same cache
line, so that it's assured that the different execution contexts will
cause latencies.
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
random: include <linux/once.h> in the right header
random: align entropy_timer_state to cache line
random: mix in cycle counter when jitter timer fires
random: spread out jitter callback to different CPUs
random: remove extraneous period and add a missing one in comments
efi: random: refresh non-volatile random seed when RNG is initialized
vsprintf: initialize siphash key using notifier
random: add back async readiness notifier
random: reseed in delayed work rather than on-demand
random: always mix cycle counter in add_latent_entropy()
hw_random: use add_hwgenerator_randomness() for early entropy
random: modernize documentation comment on get_random_bytes()
random: adjust comment to account for removed function
random: remove early archrandom abstraction
random: use random.trust_{bootloader,cpu} command line option only
stackprotector: actually use get_random_canary()
stackprotector: move get_random_canary() into stackprotector.h
treewide: use get_random_u32_inclusive() when possible
treewide: use get_random_u32_{above,below}() instead of manual loop
treewide: use get_random_u32_below() instead of deprecated function
...
|
||
|
Linus Torvalds
|
add7695957 |
Perf events updates for v6.2:
- Thoroughly rewrite the data structures that implement perf task context handling,
with the goal of fixing various quirks and unfeatures both in already merged,
and in upcoming proposed code.
The old data structure is the per task and per cpu perf_event_contexts:
task_struct::perf_events_ctxp[] <-> perf_event_context <-> perf_cpu_context
^ | ^ | ^
`---------------------------------' | `--> pmu ---'
v ^
perf_event ------'
In this new design this is replaced with a single task context and
a single CPU context, plus intermediate data-structures:
task_struct::perf_event_ctxp -> perf_event_context <- perf_cpu_context
^ | ^ ^
`---------------------------' | |
| | perf_cpu_pmu_context <--.
| `----. ^ |
| | | |
| v v |
| ,--> perf_event_pmu_context |
| | |
| | |
v v |
perf_event ---> pmu ----------------'
[ See commit
|
||
|
Linus Torvalds
|
0a1d4434db |
Updates for timers, timekeeping and drivers:
- Core:
- The timer_shutdown[_sync]() infrastructure:
Tearing down timers can be tedious when there are circular
dependencies to other things which need to be torn down. A prime
example is timer and workqueue where the timer schedules work and the
work arms the timer.
What needs to prevented is that pending work which is drained via
destroy_workqueue() does not rearm the previously shutdown
timer. Nothing in that shutdown sequence relies on the timer being
functional.
The conclusion was that the semantics of timer_shutdown_sync() should
be:
- timer is not enqueued
- timer callback is not running
- timer cannot be rearmed
Preventing the rearming of shutdown timers is done by discarding rearm
attempts silently. A warning for the case that a rearm attempt of a
shutdown timer is detected would not be really helpful because it's
entirely unclear how it should be acted upon. The only way to address
such a case is to add 'if (in_shutdown)' conditionals all over the
place. This is error prone and in most cases of teardown not required
all.
- The real fix for the bluetooth HCI teardown based on
timer_shutdown_sync().
A larger scale conversion to timer_shutdown_sync() is work in
progress.
- Consolidation of VDSO time namespace helper functions
- Small fixes for timer and timerqueue
- Drivers:
- Prevent integer overflow on the XGene-1 TVAL register which causes
an never ending interrupt storm.
- The usual set of new device tree bindings
- Small fixes and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=JlDe
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timers, timekeeping and drivers:
Core:
- The timer_shutdown[_sync]() infrastructure:
Tearing down timers can be tedious when there are circular
dependencies to other things which need to be torn down. A prime
example is timer and workqueue where the timer schedules work and
the work arms the timer.
What needs to prevented is that pending work which is drained via
destroy_workqueue() does not rearm the previously shutdown timer.
Nothing in that shutdown sequence relies on the timer being
functional.
The conclusion was that the semantics of timer_shutdown_sync()
should be:
- timer is not enqueued
- timer callback is not running
- timer cannot be rearmed
Preventing the rearming of shutdown timers is done by discarding
rearm attempts silently.
A warning for the case that a rearm attempt of a shutdown timer is
detected would not be really helpful because it's entirely unclear
how it should be acted upon. The only way to address such a case is
to add 'if (in_shutdown)' conditionals all over the place. This is
error prone and in most cases of teardown not required all.
- The real fix for the bluetooth HCI teardown based on
timer_shutdown_sync().
A larger scale conversion to timer_shutdown_sync() is work in
progress.
- Consolidation of VDSO time namespace helper functions
- Small fixes for timer and timerqueue
Drivers:
- Prevent integer overflow on the XGene-1 TVAL register which causes
an never ending interrupt storm.
- The usual set of new device tree bindings
- Small fixes and improvements all over the place"
* tag 'timers-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
dt-bindings: timer: renesas,cmt: Add r8a779g0 CMT support
dt-bindings: timer: renesas,tmu: Add r8a779g0 support
clocksource/drivers/arm_arch_timer: Use kstrtobool() instead of strtobool()
clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock()
clocksource/drivers/timer-ti-dm: Clear settings on probe and free
clocksource/drivers/timer-ti-dm: Make timer_get_irq static
clocksource/drivers/timer-ti-dm: Fix warning for omap_timer_match
clocksource/drivers/arm_arch_timer: Fix XGene-1 TVAL register math error
clocksource/drivers/timer-npcm7xx: Enable timer 1 clock before use
dt-bindings: timer: nuvoton,npcm7xx-timer: Allow specifying all clocks
dt-bindings: timer: rockchip: Add rockchip,rk3128-timer
clockevents: Repair kernel-doc for clockevent_delta2ns()
clocksource/drivers/ingenic-ost: Define pm functions properly in platform_driver struct
clocksource/drivers/sh_cmt: Access registers according to spec
vdso/timens: Refactor copy-pasted find_timens_vvar_page() helper into one copy
Bluetooth: hci_qca: Fix the teardown problem for real
timers: Update the documentation to reflect on the new timer_shutdown() API
timers: Provide timer_shutdown[_sync]()
timers: Add shutdown mechanism to the internal functions
timers: Split [try_to_]del_timer[_sync]() to prepare for shutdown mode
...
|
||
|
Linus Torvalds
|
47477c84b8 |
s390 updates for 6.2 merge window
- Factor out handle_write() function and simplify 3215 console
write operation.
- When 3170 terminal emulator is connected to the 3215 console
driver the boot time could be very long due to limited buffer
space or missing operator input. Add con3215_drop command line
parameter and con3215_drop sysfs attribute file to instruct
the kernel drop console data when such conditions are met.
- Fix white space errors in 3215 console driver.
- Move enum paiext_mode definition to a header file and rename
it to paievt_mode to indicate this is now used for several
events. Rename PAI_MODE_COUNTER to PAI_MODE_COUNTING to make
consistent with PAI_MODE_SAMPLING.
- Simplify the logic of PMU pai_crypto mapped buffer reference
counter and make it consistent with PMU pai_ext.
- Rename PMU pai_crypto mapped buffer structure member users
to active_events to make it consistent with PMU pai_ext.
- Enable HUGETLB_PAGE_OPTIMIZE_VMEMMAP configuration option.
This results in saving of 12K per 1M hugetlb page (~1.2%)
and 32764K per 2G hugetlb page (~1.6%).
- Use generic serial.h, bugs.h, shmparam.h and vga.h header
files and scrap s390-specific versions.
- The generic percpu setup code does not expect the s390-like
implementation and emits a warning. To get rid of that warning
and provide sane CPU-to-node and CPU-to-CPU distance mappings
implementat a minimal version of setup_per_cpu_areas().
- Use kstrtobool() instead of strtobool() for re-IPL sysfs device
attributes.
- Avoid unnecessary lookup of a pointer to MSI descriptor when
setting IRQ affinity for a PCI device.
- Get rid of "an incompatible function type cast" warning by
changing debug_sprintf_format_fn() function prototype so it
matches the debug_format_proc_t function type.
- Remove unused info_blk_hdr__pcpus() and get_page_state()
functions.
- Get rid of clang "unused unused insn cache ops function"
warning by moving s390_insn definition to a private header.
- Get rid of clang "unused function" warning by making function
raw3270_state_final() only available if CONFIG_TN3270_CONSOLE
is enabled.
- Use kstrobool() to parse sclp_con_drop parameter to make it
identical to the con3215_drop parameter and allow passing
values like "yes" and "true".
- Use sysfs_emit() for all SCLP sysfs show functions, which is
the current standard way to generate output strings.
- Make SCLP con_drop sysfs attribute also writable and allow to
change its value during runtime. This makes SCLP console drop
handling consistent with the 3215 device driver.
- Virtual and physical addresses are indentical on s390. However,
there is still a confusion when pointers are directly casted to
physical addresses or vice versa. Use correct address converters
virt_to_phys() and phys_to_virt() for s390 channel IO drivers.
- Support for power managemant has been removed from s390 since
quite some time. Remove unused power managemant code from the
appldata device driver.
- Allow memory tools like KASAN see memory accesses from the
checksum code. Switch to GENERIC_CSUM if KASAN is enabled,
just like x86 does.
- Add support of ECKD DASDs disks so it could be used as boot
and dump devices.
- Follow checkpatch recommendations and use octal values instead
of S_IRUGO and S_IWUSR for dump device attributes in sysfs.
- Changes to vx-insn.h do not cause a recompile of C files that
use asm(".include \"asm/vx-insn.h\"\n") magic to access vector
instruction macros from inline assemblies. Add wrapper include
header file to avoid this problem.
- Use vector instruction macros instead of byte patterns to
increase register validation routine readability.
- The current machine check register validation handling does not
take into account various scenarios and might lead to killing a
wrong user process or potentially ignore corrupted FPU registers.
Simplify logic of the machine check handler and stop the whole
machine if the previous context was kerenel mode. If the previous
context was user mode, kill the current task.
- Introduce sclp_emergency_printk() function which can be used to
emit a message in emergency cases. It is supposed to be used in
cases where regular console device drivers may not work anymore,
e.g. unrecoverable machine checks.
Keep the early Service-Call Control Block so it can also be used
after initdata has been freed to allow sclp_emergency_printk()
implementation.
- In case a system will be stopped because of an unrecoverable
machine check error print the machine check interruption code
to give a hint of what went wrong.
- Move storage error checking from the assembly entry code to C
in order to simplify machine check handling. Enter the handler
with DAT turned on, which simplifies the entry code even more.
- The machine check extended save areas are allocated using
a private "nmi_save_areas" slab cache which guarantees a
required power-of-two alignment. Get rid of that cache in
favour of kmalloc().
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCY5ckrhccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8NlrAQD8NCLeEAkhGCRnzdTyngExCrzV
Mw//cEnksUkIPqalJgEArbyFjGh05ecNaiDQduH8Gh94/qOhGE4obMdTgMWq7QY=
=3aou
-----END PGP SIGNATURE-----
Merge tag 's390-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Factor out handle_write() function and simplify 3215 console write
operation
- When 3170 terminal emulator is connected to the 3215 console driver
the boot time could be very long due to limited buffer space or
missing operator input. Add con3215_drop command line parameter and
con3215_drop sysfs attribute file to instruct the kernel drop console
data when such conditions are met
- Fix white space errors in 3215 console driver
- Move enum paiext_mode definition to a header file and rename it to
paievt_mode to indicate this is now used for several events. Rename
PAI_MODE_COUNTER to PAI_MODE_COUNTING to make consistent with
PAI_MODE_SAMPLING
- Simplify the logic of PMU pai_crypto mapped buffer reference counter
and make it consistent with PMU pai_ext
- Rename PMU pai_crypto mapped buffer structure member users to
active_events to make it consistent with PMU pai_ext
- Enable HUGETLB_PAGE_OPTIMIZE_VMEMMAP configuration option. This
results in saving of 12K per 1M hugetlb page (~1.2%) and 32764K per
2G hugetlb page (~1.6%)
- Use generic serial.h, bugs.h, shmparam.h and vga.h header files and
scrap s390-specific versions
- The generic percpu setup code does not expect the s390-like
implementation and emits a warning. To get rid of that warning and
provide sane CPU-to-node and CPU-to-CPU distance mappings implementat
a minimal version of setup_per_cpu_areas()
- Use kstrtobool() instead of strtobool() for re-IPL sysfs device
attributes
- Avoid unnecessary lookup of a pointer to MSI descriptor when setting
IRQ affinity for a PCI device
- Get rid of "an incompatible function type cast" warning by changing
debug_sprintf_format_fn() function prototype so it matches the
debug_format_proc_t function type
- Remove unused info_blk_hdr__pcpus() and get_page_state() functions
- Get rid of clang "unused unused insn cache ops function" warning by
moving s390_insn definition to a private header
- Get rid of clang "unused function" warning by making function
raw3270_state_final() only available if CONFIG_TN3270_CONSOLE is
enabled
- Use kstrobool() to parse sclp_con_drop parameter to make it identical
to the con3215_drop parameter and allow passing values like "yes" and
"true"
- Use sysfs_emit() for all SCLP sysfs show functions, which is the
current standard way to generate output strings
- Make SCLP con_drop sysfs attribute also writable and allow to change
its value during runtime. This makes SCLP console drop handling
consistent with the 3215 device driver
- Virtual and physical addresses are indentical on s390. However, there
is still a confusion when pointers are directly casted to physical
addresses or vice versa. Use correct address converters
virt_to_phys() and phys_to_virt() for s390 channel IO drivers
- Support for power managemant has been removed from s390 since quite
some time. Remove unused power managemant code from the appldata
device driver
- Allow memory tools like KASAN see memory accesses from the checksum
code. Switch to GENERIC_CSUM if KASAN is enabled, just like x86 does
- Add support of ECKD DASDs disks so it could be used as boot and dump
devices
- Follow checkpatch recommendations and use octal values instead of
S_IRUGO and S_IWUSR for dump device attributes in sysfs
- Changes to vx-insn.h do not cause a recompile of C files that use
asm(".include \"asm/vx-insn.h\"\n") magic to access vector
instruction macros from inline assemblies. Add wrapper include header
file to avoid this problem
- Use vector instruction macros instead of byte patterns to increase
register validation routine readability
- The current machine check register validation handling does not take
into account various scenarios and might lead to killing a wrong user
process or potentially ignore corrupted FPU registers. Simplify logic
of the machine check handler and stop the whole machine if the
previous context was kerenel mode. If the previous context was user
mode, kill the current task
- Introduce sclp_emergency_printk() function which can be used to emit
a message in emergency cases. It is supposed to be used in cases
where regular console device drivers may not work anymore, e.g.
unrecoverable machine checks
Keep the early Service-Call Control Block so it can also be used
after initdata has been freed to allow sclp_emergency_printk()
implementation
- In case a system will be stopped because of an unrecoverable machine
check error print the machine check interruption code to give a hint
of what went wrong
- Move storage error checking from the assembly entry code to C in
order to simplify machine check handling. Enter the handler with DAT
turned on, which simplifies the entry code even more
- The machine check extended save areas are allocated using a private
"nmi_save_areas" slab cache which guarantees a required power-of-two
alignment. Get rid of that cache in favour of kmalloc()
* tag 's390-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (38 commits)
s390/nmi: get rid of private slab cache
s390/nmi: move storage error checking back to C, enter with DAT on
s390/nmi: print machine check interruption code before stopping system
s390/sclp: introduce sclp_emergency_printk()
s390/sclp: keep sclp_early_sccb
s390/nmi: rework register validation handling
s390/nmi: use vector instruction macros instead of byte patterns
s390/vx: add vx-insn.h wrapper include file
s390/ipl: use octal values instead of S_* macros
s390/ipl: add eckd dump support
s390/ipl: add eckd support
vfio/ccw: identify CCW data addresses as physical
vfio/ccw: sort out physical vs virtual pointers usage
s390/checksum: support GENERIC_CSUM, enable it for KASAN
s390/appldata: remove power management callbacks
s390/cio: sort out physical vs virtual pointers usage
s390/sclp: allow to change sclp_console_drop during runtime
s390/sclp: convert to use sysfs_emit()
s390/sclp: use kstrobool() to parse sclp_con_drop parameter
s390/3270: make raw3270_state_final() depend on CONFIG_TN3270_CONSOLE
...
|
||
|
Linus Torvalds
|
06cff4a58e |
arm64 updates for 6.2
ACPI:
* Enable FPDT support for boot-time profiling
* Fix CPU PMU probing to work better with PREEMPT_RT
* Update SMMUv3 MSI DeviceID parsing to latest IORT spec
* APMT support for probing Arm CoreSight PMU devices
CPU features:
* Advertise new SVE instructions (v2.1)
* Advertise range prefetch instruction
* Advertise CSSC ("Common Short Sequence Compression") scalar
instructions, adding things like min, max, abs, popcount
* Enable DIT (Data Independent Timing) when running in the kernel
* More conversion of system register fields over to the generated
header
CPU misfeatures:
* Workaround for Cortex-A715 erratum #2645198
Dynamic SCS:
* Support for dynamic shadow call stacks to allow switching at
runtime between Clang's SCS implementation and the CPU's
pointer authentication feature when it is supported (complete
with scary DWARF parser!)
Tracing and debug:
* Remove static ftrace in favour of, err, dynamic ftrace!
* Seperate 'struct ftrace_regs' from 'struct pt_regs' in core
ftrace and existing arch code
* Introduce and implement FTRACE_WITH_ARGS on arm64 to replace
the old FTRACE_WITH_REGS
* Extend 'crashkernel=' parameter with default value and fallback
to placement above 4G physical if initial (low) allocation
fails
SVE:
* Optimisation to avoid disabling SVE unconditionally on syscall
entry and just zeroing the non-shared state on return instead
Exceptions:
* Rework of undefined instruction handling to avoid serialisation
on global lock (this includes emulation of user accesses to the
ID registers)
Perf and PMU:
* Support for TLP filters in Hisilicon's PCIe PMU device
* Support for the DDR PMU present in Amlogic Meson G12 SoCs
* Support for the terribly-named "CoreSight PMU" architecture
from Arm (and Nvidia's implementation of said architecture)
Misc:
* Tighten up our boot protocol for systems with memory above
52 bits physical
* Const-ify static keys to satisty jump label asm constraints
* Trivial FFA driver cleanups in preparation for v1.1 support
* Export the kernel_neon_* APIs as GPL symbols
* Harden our instruction generation routines against
instrumentation
* A bunch of robustness improvements to our arch-specific selftests
* Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...)
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmOPLFAQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNPRcCACLyDTvkimiqfoPxzzgdkx/6QOvw9s3/mXg
UcTORSZBR1VnYkiMYEKVz/tTfG99dnWtD8/0k/rz48NbhBfsF2sN4ukyBBXVf0zR
fjnaVyVC11LUgBgZKPo6maV+jf/JWf9hJtpPl06KTiPb2Hw2JX4DXg+PeF8t2hGx
NLH4ekQOrlDM8mlsN5mc0YsHbiuO7Xe/NRuet8TsgU4bEvLAwO6bzOLVUMqDQZNq
bQe2ENcGVAzAf7iRJb38lj9qB/5hrQTHRXqLXMSnJyyVjQEwYca0PeJMa7x30bXF
ZZ+xQ8Wq0mxiffZraf6SE34yD4gaYS4Fziw7rqvydC15vYhzJBH1
=hV+2
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The highlights this time are support for dynamically enabling and
disabling Clang's Shadow Call Stack at boot and a long-awaited
optimisation to the way in which we handle the SVE register state on
system call entry to avoid taking unnecessary traps from userspace.
Summary:
ACPI:
- Enable FPDT support for boot-time profiling
- Fix CPU PMU probing to work better with PREEMPT_RT
- Update SMMUv3 MSI DeviceID parsing to latest IORT spec
- APMT support for probing Arm CoreSight PMU devices
CPU features:
- Advertise new SVE instructions (v2.1)
- Advertise range prefetch instruction
- Advertise CSSC ("Common Short Sequence Compression") scalar
instructions, adding things like min, max, abs, popcount
- Enable DIT (Data Independent Timing) when running in the kernel
- More conversion of system register fields over to the generated
header
CPU misfeatures:
- Workaround for Cortex-A715 erratum #2645198
Dynamic SCS:
- Support for dynamic shadow call stacks to allow switching at
runtime between Clang's SCS implementation and the CPU's pointer
authentication feature when it is supported (complete with scary
DWARF parser!)
Tracing and debug:
- Remove static ftrace in favour of, err, dynamic ftrace!
- Seperate 'struct ftrace_regs' from 'struct pt_regs' in core ftrace
and existing arch code
- Introduce and implement FTRACE_WITH_ARGS on arm64 to replace the
old FTRACE_WITH_REGS
- Extend 'crashkernel=' parameter with default value and fallback to
placement above 4G physical if initial (low) allocation fails
SVE:
- Optimisation to avoid disabling SVE unconditionally on syscall
entry and just zeroing the non-shared state on return instead
Exceptions:
- Rework of undefined instruction handling to avoid serialisation on
global lock (this includes emulation of user accesses to the ID
registers)
Perf and PMU:
- Support for TLP filters in Hisilicon's PCIe PMU device
- Support for the DDR PMU present in Amlogic Meson G12 SoCs
- Support for the terribly-named "CoreSight PMU" architecture from
Arm (and Nvidia's implementation of said architecture)
Misc:
- Tighten up our boot protocol for systems with memory above 52 bits
physical
- Const-ify static keys to satisty jump label asm constraints
- Trivial FFA driver cleanups in preparation for v1.1 support
- Export the kernel_neon_* APIs as GPL symbols
- Harden our instruction generation routines against instrumentation
- A bunch of robustness improvements to our arch-specific selftests
- Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...)"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (151 commits)
arm64: kprobes: Return DBG_HOOK_ERROR if kprobes can not handle a BRK
arm64: kprobes: Let arch do_page_fault() fix up page fault in user handler
arm64: Prohibit instrumentation on arch_stack_walk()
arm64:uprobe fix the uprobe SWBP_INSN in big-endian
arm64: alternatives: add __init/__initconst to some functions/variables
arm_pmu: Drop redundant armpmu->map_event() in armpmu_event_init()
kselftest/arm64: Allow epoll_wait() to return more than one result
kselftest/arm64: Don't drain output while spawning children
kselftest/arm64: Hold fp-stress children until they're all spawned
arm64/sysreg: Remove duplicate definitions from asm/sysreg.h
arm64/sysreg: Convert ID_DFR1_EL1 to automatic generation
arm64/sysreg: Convert ID_DFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_AFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_MMFR5_EL1 to automatic generation
arm64/sysreg: Convert MVFR2_EL1 to automatic generation
arm64/sysreg: Convert MVFR1_EL1 to automatic generation
arm64/sysreg: Convert MVFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR2_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR1_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR0_EL1 to automatic generation
...
|
||
|
Linus Torvalds
|
1fab45ab6e |
RCU pull request for v6.2
This pull request contains the following branches: doc.2022.10.20a: Documentation updates. This is the second in a series from an ongoing review of the RCU documentation. fixes.2022.10.21a: Miscellaneous fixes. lazy.2022.11.30a: Introduces a default-off Kconfig option that depends on RCU_NOCB_CPU that, on CPUs mentioned in the nohz_full or rcu_nocbs boot-argument CPU lists, causes call_rcu() to introduce delays. These delays result in significant power savings on nearly idle Android and ChromeOS systems. These savings range from a few percent to more than ten percent. This series also includes several commits that change call_rcu() to a new call_rcu_hurry() function that avoids these delays in a few cases, for example, where timely wakeups are required. Several of these are outside of RCU and thus have acks and reviews from the relevant maintainers. srcunmisafe.2022.11.09a: Creates an srcu_read_lock_nmisafe() and an srcu_read_unlock_nmisafe() for architectures that support NMIs, but which do not provide NMI-safe this_cpu_inc(). These NMI-safe SRCU functions are required by the upcoming lockless printk() work by John Ogness et al. That printk() series depends on these commits, so if you pull the printk() series before this one, you will have already pulled in this branch, plus two more SRCU commits: |
||
Joerg Roedel
|
e3eca2e4f6 | Merge branches 'arm/allwinner', 'arm/exynos', 'arm/mediatek', 'arm/rockchip', 'arm/smmu', 'ppc/pamu', 's390', 'x86/vt-d', 'x86/amd' and 'core' into next | ||
|
Linus Torvalds
|
5b3e0cd872 |
* Document the interaction between KVM_CAP_HALT_POLL and halt_poll_ns
* s390: fix multi-epoch extension in nested guests * x86: fix uninitialized variable on nested triple fault -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmOPcBoUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroN9sAgArbccE7GCXUP3snd08rdV2Y1efKq3 SsZWlze/esVlsRBr4Z+lzMamCIdMwUT242XEq50pOjQeqYB0PjaIraDhd/lnhbk/ pYITFCoOmRtT4PyUrfYZIFeQBo+yhuhrYN8WCLFCatqY4ec+9p5nCiaFk1Wn49ZD zFm+uVXhlTa+DGNjGzjBi3mAPqTpRNAxdlPAEHv+kyaQgfRlTSo37H8Xs6PfcLVe YnsGG47Ozx3pPe5Zo3Sr1k56CQLjNcY77lVWXskKIiABsM3G5YJ2BlGgG007zlSB 4G0/GyJhb351c1MHk1O+AfMNPfD4shJfLdIm5bJNGdiFPz9XFdpqa49BNQ== =SKVi -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: "Unless anything comes from the ARM side, this should be the last pull request for this release - and it's mostly documentation: - Document the interaction between KVM_CAP_HALT_POLL and halt_poll_ns - s390: fix multi-epoch extension in nested guests - x86: fix uninitialized variable on nested triple fault" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Document the interaction between KVM_CAP_HALT_POLL and halt_poll_ns KVM: Move halt-polling documentation into common directory KVM: x86: fix uninitialized variable use on KVM_REQ_TRIPLE_FAULT KVM: s390: vsie: Fix the initialization of the epoch extension (epdx) field |
||
|
Heiko Carstens
|
bb3860cc02 |
s390/nmi: get rid of private slab cache
Get rid of private "nmi_save_areas" slab cache. The only reason this was
introduced years ago was that with some slab debugging options allocations
would only guarantee a minimum alignment of ARCH_KMALLOC_MINALIGN, which
was eight bytes back then. This is not sufficient for the extended machine
check save area.
However since commit
|
||
|
Heiko Carstens
|
742aed05af |
s390/nmi: move storage error checking back to C, enter with DAT on
Checking for storage errors in machine check entry code was done in order to handle also storage errors on kernel page tables. However this is extremely unlikely and some basic assumptions what works on machine check entry are necessary anyway. In order to simplify machine check handling delay checking for storage errors to C code. With this also change the machine check new PSW to have DAT on, which simplifies the entry code even further. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> |
||
|
Heiko Carstens
|
506faa5b9b |
s390/nmi: print machine check interruption code before stopping system
In case a system will be stopped because of e.g. missing validity bits print the machine check interruption code before the system is stopped. This is helpful, since up to now no message was printed in such a case. Only a disabled wait PSW was loaded, which doesn't give a hint of what went wrong. Improve this by printing a message with debug information. Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> |
||
|
Heiko Carstens
|
b64d7254ff |
s390/sclp: introduce sclp_emergency_printk()
Introduce sclp_emergency_printk() which can be used to emit a message in emergency cases. sclp_emergency_printk() is only supposed to be used in cases where it can be assumed that regular console device drivers may not work anymore. For example this may be the case for unrecoverable machine checks. Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> |
||
|
Heiko Carstens
|
a4c41fe398 |
s390/sclp: keep sclp_early_sccb
Keep sclp_early_sccb so it can also be used after initdata has been freed. This is a prerequisite to allow printing a message from the machine check handler. Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> |
||
|
Heiko Carstens
|
f9e5938ace |
s390/nmi: rework register validation handling
If a machine check happens in kernel mode, and the machine check interruption code indicates that e.g. vector register contents in the machine check area are not valid, the logic is to kill current. The idea behind this was that if within kernel context vector registers are not used then it is sufficient to kill the current user space process to avoid that it continues with potentially corrupt register contents. This however does not necessarily work, since the current code does not take into account that a machine check can also happen when a kernel thread is running (= no user space context), and in addition there is no way to distinguish between the "previous" and "next" user process task, if the machine check happens when a task switch happens. Given that machine checks with invalid saved register contents in the machine check save area are extremely rare, simplify the logic: if register contents are invalid and the previous context was kernel mode, stop the whole machine. If the previous context was user mode, kill the corresponding task. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> |
||
|
Heiko Carstens
|
5720aab289 |
s390/nmi: use vector instruction macros instead of byte patterns
Use vector instruction macros instead of byte patterns to increase readability. The generated code is nearly identical: - 1e8: e7 0f 10 00 00 36 vlm %v0,%v15,0(%r1) - 1ee: e7 0f 11 00 0c 36 vlm %v16,%v31,256(%r1) + 1e8: e7 0f 10 00 30 36 vlm %v0,%v15,0(%r1),3 + 1ee: e7 0f 11 00 3c 36 vlm %v16,%v31,256(%r1),3 By using the VLM macro the alignment hint is automatically specified too. Even though from a performance perspective it doesn't matter at all for the machine check code, this shows yet another benefit when using the macros. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> |
||
|
Heiko Carstens
|
706f2ada82 |
s390/vx: add vx-insn.h wrapper include file
The vector instruction macros can also be used in inline assemblies. For
this the magic
asm(".include \"asm/vx-insn.h\"\n");
must be added to C files in order to avoid that the pre-processor
eliminates the __ASSEMBLY__ guarded macros. This however comes with the
problem that changes to asm/vx-insn.h do not cause a recompile of C files
which have only this magic statement instead of a proper include statement.
This can be observed with the arch/s390/kernel/fpu.c file.
In order to fix this problem and also to avoid that the include must
be specified twice, add a wrapper include header file which will do
all necessary steps.
This way only the vx-insn.h header file needs to be included and changes to
the new vx-insn-asm.h header file cause a recompile of all dependent files
like it should.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
||
Sven Schnelle
|
a70f72767f |
s390/ipl: use octal values instead of S_* macros
octal values are easier to read and checkpatch also recommends to use them, so replace all the S_* macros with their counterparts. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> |
||
|
Sven Schnelle
|
e2d2a2968f |
s390/ipl: add eckd dump support
This adds support to use ECKD disks as dump device to linux. The new dump type is called 'eckd_dump', parameters are the same as for eckd ipl. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> |
||
|
Sven Schnelle
|
87fd22e0ae |
s390/ipl: add eckd support
This adds support to IPL from ECKD DASDs to linux.
It introduces a few sysfs files in /sys/firmware/reipl/eckd:
bootprog: the boot program selector
clear: whether to issue a diag308 LOAD_NORMAL or LOAD_CLEAR
device: the device to ipl from
br_chr: Cylinder/Head/Record number to read the bootrecord from.
Might be '0' or 'auto' if it should be read from the
volume label.
scpdata: data to be passed to the ipl'd program.
The new ipl type is called 'eckd'.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
||
|
Linus Torvalds
|
bdaa78c6aa |
15 hotfixes. 11 marked cc:stable. Only three or four of the latter
address post-6.0 issues, which is hopefully a sign that things are converging. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY4pQpQAKCRDdBJ7gKXxA jquxAP9Lqif7CGDgdq8uWY2hHS/Ujc3k7Ohgyzs37olnCuU8KwEA6/J7SpjsBgtY OfzvnwxpCTh8Kfzu/oNckIHo/EEiIA8= =o6qT -----END PGP SIGNATURE----- Merge tag 'mm-hotfixes-stable-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc hotfixes from Andrew Morton: "15 hotfixes, 11 marked cc:stable. Only three or four of the latter address post-6.0 issues, which is hopefully a sign that things are converging" * tag 'mm-hotfixes-stable-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: revert "kbuild: fix -Wimplicit-function-declaration in license_is_gpl_compatible" Kconfig.debug: provide a little extra FRAME_WARN leeway when KASAN is enabled drm/amdgpu: temporarily disable broken Clang builds due to blown stack-frame mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths mm/khugepaged: fix GUP-fast interaction by sending IPI mm/khugepaged: take the right locks for page table retraction mm: migrate: fix THP's mapcount on isolation mm: introduce arch_has_hw_nonleaf_pmd_young() mm: add dummy pmd_young() for architectures not having it mm/damon/sysfs: fix wrong empty schemes assumption under online tuning in damon_sysfs_set_schemes() tools/vm/slabinfo-gnuplot: use "grep -E" instead of "egrep" nilfs2: fix NULL pointer dereference in nilfs_palloc_commit_free_entry() hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing madvise: use zap_page_range_single for madvise dontneed mm: replace VM_WARN_ON to pr_warn if the node is offline with __GFP_THISNODE |
||
|
Heiko Carstens
|
dfe843dce7 |
s390/checksum: support GENERIC_CSUM, enable it for KASAN
This is the s390 variant of commit
|
||
|
Heiko Carstens
|
78c045c08a |
s390/appldata: remove power management callbacks
Support for power managemant has been removed from s390 since quite some time. Therefore remove unused power managemant code from the appldata device driver. Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> |
||
Jann Horn
|
d6c494e8ee |
vdso/timens: Refactor copy-pasted find_timens_vvar_page() helper into one copy
find_timens_vvar_page() is not architecture-specific, as can be seen from how all five per-architecture versions of it are the same. (arm64, powerpc and riscv are exactly the same; x86 and s390 have two characters difference inside a comment, less blank lines, and mark the !CONFIG_TIME_NS version as inline.) Refactor the five copies into a central copy in kernel/time/namespace.c. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20221130115320.2918447-1-jannh@google.com |
||
Anshuman Khandual
|
7e25de77bc |
s390/mm: use pmd_pgtable_page() helper in __gmap_segment_gaddr()
In __gmap_segment_gaddr() pmd level page table page is being extracted from the pmd pointer, similar to pmd_pgtable_page() implementation. This reduces some redundancy by directly using pmd_pgtable_page() instead, though first making it available. Link: https://lkml.kernel.org/r/20221125034502.1559986-1-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Linus Torvalds
|
5df397dec7 |
mm: delay page_remove_rmap() until after the TLB has been flushed
When we remove a page table entry, we are very careful to only free the
page after we have flushed the TLB, because other CPUs could still be
using the page through stale TLB entries until after the flush.
However, we have removed the rmap entry for that page early, which means
that functions like folio_mkclean() would end up not serializing with the
page table lock because the page had already been made invisible to rmap.
And that is a problem, because while the TLB entry exists, we could end up
with the following situation:
(a) one CPU could come in and clean it, never seeing our mapping of the
page
(b) another CPU could continue to use the stale and dirty TLB entry and
continue to write to said page
resulting in a page that has been dirtied, but then marked clean again,
all while another CPU might have dirtied it some more.
End result: possibly lost dirty data.
This extends our current TLB gather infrastructure to optionally track a
"should I do a delayed page_remove_rmap() for this page after flushing the
TLB". It uses the newly introduced 'encoded page pointer' to do that
without having to keep separate data around.
Note, this is complicated by a couple of issues:
- we want to delay the rmap removal, but not past the page table lock,
because that simplifies the memcg accounting
- only SMP configurations want to delay TLB flushing, since on UP
there are obviously no remote TLBs to worry about, and the page
table lock means there are no preemption issues either
- s390 has its own mmu_gather model that doesn't delay TLB flushing,
and as a result also does not want the delayed rmap. As such, we can
treat S390 like the UP case and use a common fallback for the "no
delays" case.
- we can track an enormous number of pages in our mmu_gather structure,
with MAX_GATHER_BATCH_COUNT batches of MAX_TABLE_BATCH pages each,
all set up to be approximately 10k pending pages.
We do not want to have a huge number of batched pages that we then
need to check for delayed rmap handling inside the page table lock.
Particularly that last point results in a noteworthy detail, where the
normal page batch gathering is limited once we have delayed rmaps pending,
in such a way that only the last batch (the so-called "active batch") in
the mmu_gather structure can have any delayed entries.
NOTE! While the "possibly lost dirty data" sounds catastrophic, for this
all to happen you need to have a user thread doing either madvise() with
MADV_DONTNEED or a full re-mmap() of the area concurrently with another
thread continuing to use said mapping.
So arguably this is about user space doing crazy things, but from a VM
consistency standpoint it's better if we track the dirty bit properly even
when user space goes off the rails.
[akpm@linux-foundation.org: fix UP build, per Linus]
Link: https://lore.kernel.org/all/B88D3073-440A-41C7-95F4-895D3F657EF2@gmail.com/
Link: https://lkml.kernel.org/r/20221109203051.1835763-4-torvalds@linux-foundation.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hugh Dickins <hughd@google.com>
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Tested-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Linus Torvalds
|
7cc8f9c714 |
mm: mmu_gather: prepare to gather encoded page pointers with flags
This is purely a preparatory patch that makes all the data structures ready for encoding flags with the mmu_gather page pointers. The code currently always sets the flag to zero and doesn't use it yet, but now it's tracking the type state along. The next step will be to actually start using it. Link: https://lkml.kernel.org/r/20221109203051.1835763-3-torvalds@linux-foundation.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Andrew Morton
|
a38358c934 | Merge branch 'mm-hotfixes-stable' into mm-stable | ||
Juergen Gross
|
6617da8fb5 |
mm: add dummy pmd_young() for architectures not having it
In order to avoid #ifdeffery add a dummy pmd_young() implementation as a fallback. This is required for the later patch "mm: introduce arch_has_hw_nonleaf_pmd_young()". Link: https://lkml.kernel.org/r/fd3ac3cd-7349-6bbd-890a-71a9454ca0b3@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Yu Zhao <yuzhao@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Paolo Bonzini
|
7e3bba93f4 |
VSIE epdx shadowing fix
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEwGNS88vfc9+v45Yq41TmuOI4ufgFAmN/d5sACgkQ41TmuOI4 ufhAqQ//X4Qq6jsJL/P2wdKIjQHXaJlrLkcJ2vgYcu0DspFIcpKK+HGYBFWE0sCO Lm9BqsPnGN8awlBWp8USEEnLVhhGR542/zbAslj9eIBE4Z2/dOv3ptxOjGE+VtXl cd146UspWdOREvnmn8BM55124nj5ebVwGB2zVrkmI5Df6z8ZHsYAKvziw4dCmuwU 7lDSffQ30XWXERSXCC4xQhcaj9rGSNx2PpveCQcn4Hw2G9JEzxoJTvaUuMzcWRw+ nQ0uVowZLRxiLJvGCsRW4FhXFKbWX/SYUVtWTWmVMTzKrmGi4nYV2nZ16j6KELch frCAY8kg/vJzYW5KwXNtDO9wDffmcAzQKvbQqNDCOcmOb9EB7upjj4OUDa+XfIV7 LZzUwe/90cW8/dqtUWG14jHy0CC20xPUB1eEBuNf1XQ/BjkJjFxVYqhKjgzi3VLy kpwTwWLG/WNH5qPpr2PL3abNy3ypJJ4Z7N+1nYy3x1L8cPngPaesZqtfhrnNPMNU aC76oAr9lVKbpk5waxwcqujoJDJloko9zxWRxeJAk+Wj425dh8F2dwp53I11/rTf qQUghFbCIVKxMXvCPaR6Yji6I89Wh0nY7JZuPQjjE2qSXntyZ8KH9iQ43Z1+EQv2 U0CBSjlnl2B6Dotbzhgp+B4WuAVsH+QV8n3pL8IcwgPjTRg5NQM= =/yQz -----END PGP SIGNATURE----- Merge tag 'kvm-s390-master-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD VSIE epdx shadowing fix |
||
|
Paolo Bonzini
|
1e79a9e3ab |
- Second batch of the lazy destroy patches
- First batch of KVM changes for kernel virtual != physical address support - Removal of a unused function -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEwGNS88vfc9+v45Yq41TmuOI4ufgFAmN/eYwACgkQ41TmuOI4 ufjoxA/9Et38aXO/IhmUt8v0QhA4yec+sc5GSFfQSYehej/1Vqhw0DXx+ORUiRgg +rtiXJSSqkuD2dL+BDffY2xoul6nzNdVf4AbkcnrWscfWr6xwVYlPvuL0ymGI6J2 U/IPedRoKw0bHw/wHs05yV5PubrRwDFERKhtyXWYGbPJhX0w2n3IFOoKH1oWBhLW Dc8jEs6t3gDbJ71Er0xoeBUoiuu+PgZG06cpOvzBZ0KclRgjADXyISqqk8/4mu8w R+/Wf8NcrbQYV1jfCeq5zIsKC8uvnFj25UuyTLumn5vh+dNNsvE72Khe4tz7LI0I ZPZ+GZuemu7Yi12dKjw4Sw3ui0ejWH/5XL1SVB0X/xYIWrBqOot+Lq6538GCng+c tJt+zsu64VFgXCCZ8O9qO4uE4DBL70H3ThT7VZxIghSTZtY0xh3uFc64f3/3d9dy K4WTJHrmMxhXaA/rqtIa8I53JvFl8CztofZATiQQesyPuc7lZ01w1Co5el4xYaxe YknyMTq11qf/iYqVOW7sjoWW/YRuuMZ4+FhpI3o/SllVdN98iTwkk1kP3wcoBO5P bvzpm+WXHbv9OxifPrqkqv34+upbjfEmSogHudQzagBX4vl3rZRfBCdQGCAha0Uc ZYyg68kiil5sWmHI/Ln/ZjANYfbS5sF0CreuWxnmqcwKl2NSN/E= =/1yt -----END PGP SIGNATURE----- Merge tag 'kvm-s390-next-6.2-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD - Second batch of the lazy destroy patches - First batch of KVM changes for kernel virtual != physical address support - Removal of a unused function |
||
|
Linus Torvalds
|
e3ebac80b6 |
s390 updates for 6.1-rc7
- Fix size of incorrectly increased from four to eight bytes TOD field of crash dump save area. As result in case of kdump NT_S390_TODPREG ELF notes section contains correct value and "detected read beyond size of field" compiler warning goes away. - Fix memory leak in cryptographic Adjunct Processors (AP) module on initialization failure path. - Add Gerald Schaefer <gerald.schaefer@linux.ibm.com> and Alexander Gordeev <agordeev@linux.ibm.com> as S390 memory management maintainers. Also rename the S390 section to S390 ARCHITECTURE to be a bit more precise. -----BEGIN PGP SIGNATURE----- iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCY4DkjxccYWdvcmRlZXZA bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8JrmAP928nAXDg4Gfctxka3tANgqu6uZ SLQ79G717Hq+OHyYjwD9GHFrKjfaimYocAsyf9jPyKnnac4jVydA42CLdLbV2AI= =Vl1I -----END PGP SIGNATURE----- Merge tag 's390-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Alexander Gordeev: - Fix size of incorrectly increased from four to eight bytes TOD field of crash dump save area. As result in case of kdump NT_S390_TODPREG ELF notes section contains correct value and "detected read beyond size of field" compiler warning goes away. - Fix memory leak in cryptographic Adjunct Processors (AP) module on initialization failure path. - Add Gerald Schaefer <gerald.schaefer@linux.ibm.com> and Alexander Gordeev <agordeev@linux.ibm.com> as S390 memory management maintainers. Also rename the S390 section to S390 ARCHITECTURE to be a bit more precise. * tag 's390-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: MAINTAINERS: add S390 MM section s390/crashdump: fix TOD programmable field size s390/ap: fix memory leak in ap_init_qci_info() |
||
Al Viro
|
de4eda9de2 |
use less confusing names for iov_iter direction initializers
READ/WRITE proved to be actively confusing - the meanings are "data destination, as used with read(2)" and "data source, as used with write(2)", but people keep interpreting those as "we read data from it" and "we write data to it", i.e. exactly the wrong way. Call them ITER_DEST and ITER_SOURCE - at least that is harder to misinterpret... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Al Viro
|
77729412ac |
[s390] memcpy_real(): WRITE is "data source", not destination...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Al Viro
|
0e1e4a2238 |
[s390] copy_oldmem_kernel() - WRITE is "data source", not destination
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
Thomas Huth
|
0dd4cdccda |
KVM: s390: vsie: Fix the initialization of the epoch extension (epdx) field
We recently experienced some weird huge time jumps in nested guests when
rebooting them in certain cases. After adding some debug code to the epoch
handling in vsie.c (thanks to David Hildenbrand for the idea!), it was
obvious that the "epdx" field (the multi-epoch extension) did not get set
to 0xff in case the "epoch" field was negative.
Seems like the code misses to copy the value from the epdx field from
the guest to the shadow control block. By doing so, the weird time
jumps are gone in our scenarios.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2140899
Fixes:
|
||
|
Heiko Carstens
|
f44e07a8af |
s390/crashdump: fix TOD programmable field size
The size of the TOD programmable field was incorrectly increased from four to eight bytes with commit |