IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Updated code with already prepared dev_err_probe(). It reduces code size
and simplifies EPROBE_DEFER handling.
Also, unify message format for similar error cases.
Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210305091029.23378-1-piyush.mehta@xilinx.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On Hisilicon Kunpeng920, ESP is set to 1 by default for all ports of
SATA controller. In some scenarios, some ports are not external SATA ports,
and it cause disks connected to these ports to be identified as removable
disks. So disable the SXS capability on the software side to prevent users
from mistakenly considering non-removable disks as removable disks and
performing related operations.
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1615544676-61926-1-git-send-email-luojiaxing@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Iff platform_get_irq() returns 0, ahci_platform_init_host() would return 0
early (as if the call was successful). Override IRQ0 with -EINVAL instead
as the 'libata' regards 0 as "no IRQ" (thus polling) anyway...
Fixes: c034640a32f8 ("ata: libahci: properly propagate return value of platform_get_irq()")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Link: https://lore.kernel.org/r/4448c8cc-331f-2915-0e17-38ea34e251c8@omprussia.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The function mv_platform_probe() neglects to check the results of the
calls to platform_get_irq() and irq_of_parse_and_map() and blithely
passes them to ata_host_activate() -- while the latter only checks
for IRQ0 (treating it as a polling mode indicattion) and passes the
negative values to devm_request_irq() causing it to fail as it takes
unsigned values for the IRQ #...
Add to mv_platform_probe() the proper IRQ checks to pass the positive IRQ
#s to ata_host_activate(), propagate upstream the negative error codes,
and override the IRQ0 with -EINVAL (as we don't want the polling mode).
Fixes: f351b2d638c3 ("sata_mv: Support SoC controllers")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Link: https://lore.kernel.org/r/51436f00-27a1-e20b-c21b-0e817e0a7c86@omprussia.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_acpi.c:38: warning: Function parameter or member 'link' not described in 'pacpi_pre_reset'
drivers/ata/pata_acpi.c:38: warning: Excess function parameter 'ap' description in 'pacpi_pre_reset'
drivers/ata/pata_acpi.c:74: warning: Function parameter or member 'ap' not described in 'pacpi_discover_modes'
drivers/ata/pata_acpi.c:74: warning: Excess function parameter 'mask' description in 'pacpi_discover_modes'
drivers/ata/pata_acpi.c:239: warning: Function parameter or member 'id' not described in 'pacpi_init_one'
drivers/ata/pata_acpi.c:239: warning: Excess function parameter 'ent' description in 'pacpi_init_one'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-16-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/libata-acpi.c:493: warning: expecting prototype for ata_acpi_gtm_xfermode(). Prototype was for ata_acpi_gtm_xfermask() instead
drivers/ata/libata-acpi.c:648: warning: Function parameter or member 'prev_gtf' not described in 'ata_acpi_run_tf'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-15-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/sata_mv.c:1929: warning: expecting prototype for mv_bmdma_stop(). Prototype was for mv_bmdma_stop_ap() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mark Lord <mlord@pobox.com>
Cc: ALWAYS copy <linux-ide@vger.kernel.org>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-14-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_cs5530.c:283: warning: Function parameter or member 'pdev' not described in 'cs5530_init_one'
drivers/ata/pata_cs5530.c:283: warning: Excess function parameter 'dev' description in 'cs5530_init_one'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-13-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_legacy.c:606: warning: expecting prototype for opt82c465mv_qc_issue(). Prototype was for opti82c46x_qc_issue() instead
drivers/ata/pata_legacy.c:933: warning: Function parameter or member 'probe' not described in 'legacy_init_one'
drivers/ata/pata_legacy.c:933: warning: Excess function parameter 'pl' description in 'legacy_init_one'
drivers/ata/pata_legacy.c:1024: warning: Function parameter or member 'primary' not described in 'legacy_check_special_cases'
drivers/ata/pata_legacy.c:1024: warning: Function parameter or member 'secondary' not described in 'legacy_check_special_cases'
drivers/ata/pata_legacy.c:1024: warning: Excess function parameter 'master' description in 'legacy_check_special_cases'
drivers/ata/pata_legacy.c:1024: warning: Excess function parameter 'master' description in 'legacy_check_special_cases'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Colten Edwards <pje120@cs.usask.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-12-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/ata_generic.c:164: warning: expecting prototype for ata_generic_init(). Prototype was for ata_generic_init_one() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: Hat Inc <alan@redhat.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-11-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_opti.c:82: warning: Function parameter or member 'val' not described in 'opti_write_reg'
drivers/ata/pata_opti.c:82: warning: Excess function parameter 'value' description in 'opti_write_reg'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jaromir Koutek <miri@punknet.cz>
Cc: Jan Harkes <jaharkes@cwi.nl>
Cc: Mark Lord <mlord@pobox.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-10-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_sl82c105.c:191: warning: expecting prototype for sl82c105_bmdma_end(). Prototype was for sl82c105_bmdma_stop() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-9-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_piccolo.c:87: warning: expecting prototype for ata_tosh_init(). Prototype was for ata_tosh_init_one() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: Hat Inc <alan@redhat.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-8-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_via.c:675: warning: Function parameter or member 'pdev' not described in 'via_reinit_one'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-7-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_it821x.c:346: warning: expecting prototype for it821x_passthru_dma_start(). Prototype was for it821x_passthru_bmdma_start() instead
drivers/ata/pata_it821x.c:369: warning: expecting prototype for it821x_passthru_dma_stop(). Prototype was for it821x_passthru_bmdma_stop() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-6-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_triflex.c:143: warning: expecting prototype for triflex_dma_start(). Prototype was for triflex_bmdma_start() instead
drivers/ata/pata_triflex.c:159: warning: Function parameter or member 'qc' not described in 'triflex_bmdma_stop'
drivers/ata/pata_triflex.c:159: warning: expecting prototype for triflex_dma_stop(). Prototype was for triflex_bmdma_stop() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Torben Mathiasen <torben.mathiasen@hp.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-5-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_sis.c:124: warning: Excess function parameter 'deadline' description in 'sis_133_cable_detect'
drivers/ata/pata_sis.c:529: warning: Function parameter or member 'mask' not described in 'sis_133_mode_filter'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: Lionel Bouton <Lionel.Bouton@inet6.fr>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: "L.C. Chang" <lcchang@sis.com.tw>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-4-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_sil680.c:68: warning: Function parameter or member 'adev' not described in 'sil680_seldev'
drivers/ata/pata_sil680.c:254: warning: Function parameter or member 'try_mmio' not described in 'sil680_init_chip'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: Red Hat <alan@redhat.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-3-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_pdc202xx_old.c:127: warning: expecting prototype for pdc202xx_configure_dmamode(). Prototype was for pdc202xx_set_dmamode() instead
drivers/ata/pata_pdc202xx_old.c:228: warning: expecting prototype for pdc2026x_bmdma_end(). Prototype was for pdc2026x_bmdma_stop() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210318085150.3131936-2-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The driver's probe() method is written as if platform_get_irq() returns 0
on error, while actually it returns a negative error code (with all the
other values considered valid IRQs). Rewrite the driver's IRQ checking
code to pass the positive IRQ #s to ata_host_activate(), propagate errors
upstream, and treat IRQ0 as error, returning -EINVAL, as the libata code
treats 0 as an indication that polling should be used anyway...
Fixes: 0df0d0a0ea9f ("[libata] ARM: add ixp4xx PATA driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The driver's probe() method is written as if platform_get_irq() returns 0
on error, while actually it returns a negative error code (with all the
other values considered valid IRQs). Rewrite the driver's IRQ checking code
to pass the positive IRQ #s to ata_host_activate(), propagate upstream
-EPROBE_DEFER, and set up the driver to polling mode on (negative) errors
and IRQ0 (libata treats IRQ #0 as a polling mode anyway)...
Fixes: a480167b23ef ("pata_arasan_cf: Adding support for arasan compact flash host controller")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_pdc2027x.c:209: warning: expecting prototype for pdc2027x_pata_cable_detect(). Prototype was for pdc2027x_cable_detect() instead
drivers/ata/pata_pdc2027x.c:262: warning: expecting prototype for pdc2720x_mode_filter(). Prototype was for pdc2027x_mode_filter() instead
drivers/ata/pata_pdc2027x.c:513: warning: Function parameter or member 'board_idx' not described in 'pdc_adjust_pll'
drivers/ata/pata_pdc2027x.c:513: warning: expecting prototype for adjust_pll(). Prototype was for pdc_adjust_pll() instead
drivers/ata/pata_pdc2027x.c:599: warning: expecting prototype for detect_pll_input_clock(). Prototype was for pdc_detect_pll_input_clock() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Albert Lee <albertcc@tw.ibm.com>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: Frank Tiernan <frankt@promise.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_optidma.c:298: warning: expecting prototype for optidma_make_bits(). Prototype was for optidma_make_bits43() instead
drivers/ata/pata_optidma.c:319: warning: Function parameter or member 'r_failed' not described in 'optidma_set_mode'
drivers/ata/pata_optidma.c:361: warning: Function parameter or member 'pdev' not described in 'optiplus_with_udma'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_jmicron.c:135: warning: Function parameter or member 'id' not described in 'jmicron_init_one'
drivers/ata/pata_jmicron.c:135: warning: Excess function parameter 'ent' description in 'jmicron_init_one'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_marvell.c:125: warning: Function parameter or member 'id' not described in 'marvell_init_one'
drivers/ata/pata_marvell.c:125: warning: Excess function parameter 'ent' description in 'marvell_init_one'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_hpt3x2n.c:247: warning: expecting prototype for hpt3x2n_bmdma_end(). Prototype was for hpt3x2n_bmdma_stop() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_cs5520.c:61: warning: Function parameter or member 'pio' not described in 'cs5520_set_timings'
drivers/ata/pata_cs5520.c:257: warning: Function parameter or member 'mesg' not described in 'cs5520_pci_device_suspend'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_atiixp.c:103: warning: Function parameter or member 'pio' not described in 'atiixp_set_pio_timing'
drivers/ata/pata_atiixp.c:241: warning: expecting prototype for atiixp_dma_stop(). Prototype was for atiixp_bmdma_stop() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: ATI Inc <hyu@ati.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_amd.c:331: warning: expecting prototype for nv_probe_init(). Prototype was for nv_pre_reset() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_ali.c:119: warning: Function parameter or member 'mask' not described in 'ali_20_filter'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: CJ <cjtsai@ali.com.tw>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: Alan Cox <alan@redhat.com>
Cc: Clear Zhang <Clear.Zhang@ali.com.tw>
Cc: linux-ide@vger.kernel.org
Cc: and cc <htejun@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/sata_mv.c:1162: warning: Function parameter or member 'ap' not described in 'mv_start_edma'
drivers/ata/sata_mv.c:1162: warning: Function parameter or member 'port_mmio' not described in 'mv_start_edma'
drivers/ata/sata_mv.c:1162: warning: Function parameter or member 'protocol' not described in 'mv_start_edma'
drivers/ata/sata_mv.c:1162: warning: Excess function parameter 'base' description in 'mv_start_edma'
drivers/ata/sata_mv.c:1535: warning: Function parameter or member 'enable_bmdma' not described in 'mv_bmdma_enable_iie'
drivers/ata/sata_mv.c:1535: warning: expecting prototype for mv_bmdma_enable(). Prototype was for mv_bmdma_enable_iie() instead
drivers/ata/sata_mv.c:1930: warning: Function parameter or member 'ap' not described in 'mv_bmdma_stop_ap'
drivers/ata/sata_mv.c:1930: warning: expecting prototype for mv_bmdma_stop(). Prototype was for mv_bmdma_stop_ap() instead
drivers/ata/sata_mv.c:2228: warning: Function parameter or member 'ap' not described in 'mv_send_fis'
drivers/ata/sata_mv.c:3263: warning: Function parameter or member 'hpriv' not described in 'mv6_reset_hc'
drivers/ata/sata_mv.c:3263: warning: Function parameter or member 'n_hc' not described in 'mv6_reset_hc'
drivers/ata/sata_mv.c:3541: warning: Function parameter or member 'hpriv' not described in 'soc_is_65n'
drivers/ata/sata_mv.c:3541: warning: expecting prototype for soc_is_65(). Prototype was for soc_is_65n() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mark Lord <mlord@pobox.com>
Cc: ALWAYS copy <linux-ide@vger.kernel.org>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/ahci_xgene.c:564: warning: Function parameter or member 'host' not described in 'xgene_ahci_handle_broken_edge_irq'
drivers/ata/ahci_xgene.c:564: warning: Excess function parameter 'ata_host' description in 'xgene_ahci_handle_broken_edge_irq'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Loc Ho <lho@apm.com>
Cc: Tuan Phan <tphan@apm.com>
Cc: Suman Tripathi <stripathi@apm.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_hpt37x.c:283: warning: Function parameter or member 'mask' not described in 'hpt370_filter'
drivers/ata/pata_hpt37x.c:301: warning: Function parameter or member 'mask' not described in 'hpt370a_filter'
drivers/ata/pata_hpt37x.c:473: warning: expecting prototype for hpt370_bmdma_end(). Prototype was for hpt370_bmdma_stop() instead
drivers/ata/pata_hpt37x.c:567: warning: expecting prototype for hpt37x_bmdma_end(). Prototype was for hpt37x_bmdma_stop() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_hpt366.c:200: warning: Function parameter or member 'mask' not described in 'hpt366_filter'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_amd.c:179: warning: Excess function parameter 'adev' description in 'amd_fifo_setup'
drivers/ata/pata_amd.c:331: warning: Function parameter or member 'link' not described in 'nv_pre_reset'
drivers/ata/pata_amd.c:331: warning: Function parameter or member 'deadline' not described in 'nv_pre_reset'
drivers/ata/pata_amd.c:331: warning: expecting prototype for nv_probe_init(). Prototype was for nv_pre_reset() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_artop.c:278: warning: expecting prototype for artop_6210_qc_defer(). Prototype was for artop6210_qc_defer() instead
drivers/ata/pata_artop.c:359: warning: Function parameter or member 'id' not described in 'artop_init_one'
drivers/ata/pata_artop.c:359: warning: Excess function parameter 'ent' description in 'artop_init_one'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: Thibaut VARENE <varenet@parisc-linux.org>
Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_ali.c:119: warning: Function parameter or member 'mask' not described in 'ali_20_filter'
drivers/ata/pata_ali.c:119: warning: Excess function parameter 'ap' description in 'ali_20_filter'
drivers/ata/pata_ali.c:322: warning: Function parameter or member 'qc' not described in 'ali_check_atapi_dma'
drivers/ata/pata_ali.c:322: warning: Excess function parameter 'adev' description in 'ali_check_atapi_dma'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: CJ <cjtsai@ali.com.tw>
Cc: Andre Hedrick <andre@linux-ide.org>
Cc: Alan Cox <alan@redhat.com>
Cc: Clear Zhang <Clear.Zhang@ali.com.tw>
Cc: linux-ide@vger.kernel.org
Cc: and cc <htejun@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/libata-pmp.c:76: warning: Function parameter or member 'val' not described in 'sata_pmp_write'
drivers/ata/libata-pmp.c:76: warning: Excess function parameter 'r_val' description in 'sata_pmp_write'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Tejun Heo <teheo@suse.de>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/libata-sata.c:1085: warning: expecting prototype for port_alloc(). Prototype was for ata_sas_port_alloc() instead
drivers/ata/libata-sata.c:1140: warning: expecting prototype for ata_port_stop(). Prototype was for ata_sas_port_stop() instead
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Tejun Heo <htejun@gmail.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/ata/libata-transport.c:258: warning: Function parameter or member 'ap' not described in 'ata_tport_delete'
drivers/ata/libata-transport.c:258: warning: Excess function parameter 'port' description in 'ata_tport_delete'
drivers/ata/libata-transport.c:384: warning: Function parameter or member 'link' not described in 'ata_tlink_delete'
drivers/ata/libata-transport.c:384: warning: Excess function parameter 'port' description in 'ata_tlink_delete'
drivers/ata/libata-transport.c:640: warning: Function parameter or member 'ata_dev' not described in 'ata_tdev_delete'
drivers/ata/libata-transport.c:640: warning: Excess function parameter 'port' description in 'ata_tdev_delete'
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The return value of ata_qc_from_tag() is checked in the whole
kernel except for two calls in sata_dwc_isr(), which may lead
to null-pointer-dereference. Add return value checks to avoid
such case.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
SATA controller used in Xilinx ZynqMP platform uses xilinx GT phy
which has 4 GT lanes and can be used by 4 peripherals at a time.
SATA controller uses 1 GT phy lane among the 4 GT lanes. To configure
the GT lane for the SATA controller, the below sequence is expected.
1. Assert the SATA controller reset.
2. Configure the xilinx GT phy lane for SATA controller (phy_init).
3. De-assert the SATA controller reset.
4. Wait for PLL of the GT lane used by SATA to be locked (phy_power_on).
The ahci_platform_enable_resources() by default does the phy_init()
and phy_power_on() but the default sequence doesn't work with Xilinx
platforms. Because of this reason, updated the driver to support the
new sequence.
Added cevapriv->rst check, for backward compatibility with the older
sequence. If the reset controller is not available, then the SATA
controller will configure with the older sequences.
Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch updates the documentation for the CEVA controller for adding
the optional properties for 'phys' and 'resets'.
Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Fix corner cases in the rxe reference counting cleanup that are causing
regressions in blktests for SRP
- Two kdoc fixes so W=1 is clean
- Missing error return in error unwind for mlx5
- Wrong lock type nesting in IB CM
-----BEGIN PGP SIGNATURE-----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=j5ZU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Nothing special here, though Bob's regression fixes for rxe would have
made it before the rc cycle had there not been such strong winter
weather!
- Fix corner cases in the rxe reference counting cleanup that are
causing regressions in blktests for SRP
- Two kdoc fixes so W=1 is clean
- Missing error return in error unwind for mlx5
- Wrong lock type nesting in IB CM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/rxe: Fix errant WARN_ONCE in rxe_completer()
RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt()
RDMA/rxe: Fix missed IB reference counting in loopback
RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc
RDMA/mlx5: Set correct kernel-doc identifier
IB/mlx5: Add missing error code
RDMA/rxe: Fix missing kconfig dependency on CRYPTO
RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep
- Fix coding style issues (Jason Yan)
-----BEGIN PGP SIGNATURE-----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=oow8
-----END PGP SIGNATURE-----
Merge tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull gcc-plugins fixes from Kees Cook:
"Tiny gcc-plugin fixes for v5.12-rc2. These issues are small but have
been reported a couple times now by static analyzers, so best to get
them fixed to reduce the noise. :)
- Fix coding style issues (Jason Yan)"
* tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
gcc-plugins: latent_entropy: remove unneeded semicolon
gcc-plugins: structleak: remove unneeded variable 'ret'
Reed-Solomon roots that are unaligned to block size.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmBCgmkTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWlF9B/481eKdOYK5RLj6LneVf10niUACEN0G
tp8CeKh2wEcTjX+9pWxvigAE7FZnvD0sCts3eRCd8egkdV3L9uHyaCHU9V8iGP8L
dSjHXjbwbOumww5FY1ddx2ZiRImcU7YpEj5TrUZi2TyoAB2jOblDgaUt8jWsbppa
8miPUZi0Kp56Z5EsFJcT8dYbIlLfUpD/XfZ0hjqMoc9XZOeoGvYqpYX1pZgIfj2s
F23Dru858zqjv7OLmIgjzSgS0dZSwdLMUpKInaW1AipvNQpWSuh2DQdP7Ail3+yy
gUirpBjztoYCfqwpQTJpGnnb47tECYUXef6dI7xR5bXnyaX8CG5bRvVV
=a00f
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"Fix DM verity target's optional Forward Error Correction (FEC) for
Reed-Solomon roots that are unaligned to block size"
* tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm verity: fix FEC for RS roots unaligned to block size
dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size
