IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Updates STM32MP13x SoC DTSI file to define the SoC voltage regulators
exposed by OP-TEE SCMI service and remove the fixed regulator
abstraction previously used until OP-TEE OS firmware embeds the
service which it does since its release tag 3.22.0.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
In the schematics of document UM1907, the power supply for the micro SD
card is the same 3v3 voltage that is used to power other devices on the
board. By generalizing the name of the voltage regulator, it can be
referenced by other nodes in the device tree without creating
misunderstandings.
This patch is preparatory for future developments.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Since commit 913a956c4363 ("pinctrl: stm32: use dynamic allocation
of GPIO base"), it's impossible to retrieve gpios from phandle,
for example, mmc driver can't retrieve cd-gpios.
Add missing gpio-ranges properties to fix it.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Since commit 913a956c4363 ("pinctrl: stm32: use dynamic allocation
of GPIO base"), it's impossible to retrieve gpios from phandle,
for example, mmc driver can't retrieve cd-gpios.
Add missing gpio-ranges properties to fix it.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The "regulator-active-discharge" property is uint32, not boolean:
stm32mp157c-emsbc-argon.dtb: stpmic@33: regulators:pwr_sw1:regulator-active-discharge: True is not of type 'array'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The STPMIC1 PMIC vref_ddr regulator does not support over-current
protection, according to bindings and Linux driver:
stm32mp157c-emsbc-argon.dtb: stpmic@33: regulators:vref_ddr: 'regulator-over-current-protection' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add missing "detach" mailbox to this board to permit the CPU to inform
the remote processor on a detach. This signal allows the remote processor
firmware to stop IPC communication and to reinitialize the resources for
a re-attach.
Without this mailbox, detach is not possible and kernel log contains the
following warning to, so make sure all the STM32MP15xx platform DTs are
in sync regarding the mailboxes to fix the detach issue and the warning:
"
stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach"
"
Fixes: 6257dfc1c412 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add missing "detach" mailbox to this board to permit the CPU to inform
the remote processor on a detach. This signal allows the remote processor
firmware to stop IPC communication and to reinitialize the resources for
a re-attach.
Without this mailbox, detach is not possible and kernel log contains the
following warning to, so make sure all the STM32MP15xx platform DTs are
in sync regarding the mailboxes to fix the detach issue and the warning:
"
stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach"
"
Fixes: 6257dfc1c412 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add missing "detach" mailbox to this board to permit the CPU to inform
the remote processor on a detach. This signal allows the remote processor
firmware to stop IPC communication and to reinitialize the resources for
a re-attach.
Without this mailbox, detach is not possible and kernel log contains the
following warning to, so make sure all the STM32MP15xx platform DTs are
in sync regarding the mailboxes to fix the detach issue and the warning:
"
stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach"
"
Fixes: 6257dfc1c412 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add missing "detach" mailbox to this board to permit the CPU to inform
the remote processor on a detach. This signal allows the remote processor
firmware to stop IPC communication and to reinitialize the resources for
a re-attach.
Without this mailbox, detach is not possible and kernel log contains the
following warning to, so make sure all the STM32MP15xx platform DTs are
in sync regarding the mailboxes to fix the detach issue and the warning:
"
stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach"
"
Fixes: 6257dfc1c412 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This commit introduces Power over Data Line (PoDL) Power Source
Equipment (PSE) regulator nodes to the PRTT1C devicetree. The addition
of these nodes enables support for PoDL in PRTT1C devices, allowing
power delivery and data transmission over a single twisted pair.
The new PoDL PSE regulator nodes provide voltage capability information
of the current board design, which can be used as a hint for system
administrators when configuring and managing power settings. This
update enhances the versatility and simplifies the power management of
PRTT1C devices while ensuring compatibility with connected Powered
Devices (PDs).
After applying this patch, the power delivery can be controlled from
user space with a patched [1] ethtool version using the following commands:
ethtool --set-pse t1l2 podl-pse-admin-control enable
to enable power delivery, and
ethtool --show-pse t1l2
to display the PoDL PSE settings.
By integrating PoDL PSE support into the PRTT1C devicetree, users can
benefit from streamlined power and data connections in their
deployments, improving overall system efficiency and reducing cabling
complexity.
[1] https://lore.kernel.org/all/20230317093024.1051999-1-o.rempel@pengutronix.de/
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The patch adds support for touchscreen on the stm32f746-disco board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The revert commit 36a6418bb1259 ("Revert "ARM: dts: stm32: add CAN support
on stm32f746"") prevented parsing errors due to the lack of CAN3 binding.
Now that the binding definition for CAN3 is available in the mainline
thanks to commit 8f3ef556f8e1a ("dt-bindings: mfd: stm32f7: Add binding
definition for CAN3"), we can re-add the CAN support and make the driver
usable again.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
All boards using the DSI node duplicate the same pattern common pattern
in board DTs, that pattern is ports with endpoint labels and the same
in-SoC regulator connection. Move that common pattern into stm32mp157.dtsi
instead.
The two boards which do define panel@0 directly in the DSI bridge node now
have #address-cells/#size-cells in their board DT instead of it being in
stm32mp157.dtsi and activated incorrectly for all boards, even the ones
which use e.g. another DSI-to-something bridge.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Enables use of GIC PPI#15 for OP-TEE asynchronous notifications
on stm32mp13 platforms.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The Linux Automation Test Automation Controller (LXA TAC)[1] is an embedded
software development tool built around the Octavo Systems OSD32MP15x SiP.
The device contains an eMMC for storage, a DSA-capable on board ethernet
switch with two external ports, dual CAN busses, a power switch to turn
a device under test on or off and some other I/O.
As of now there are two STM32MP157 based hardware generations (Gen 1 and
Gen 2) that have most of their hardware config in common.
In the future there will also be a STM32MP153 based hardware generation.
[1]: https://www.linux-automation.com/en/products/lxa-tac.html
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add DT compatible string for Linux Automation GmbH Test Automation
Controllers (LXA TAC).
LXA TACs are a development tool for embedded devices with a focus on
embedded Linux devices.
As of now there are two STM32MP157 based hardware generations (Gen 1 and
Gen 2) that have most of their hardware config in common.
In the future there will also be a STM32MP153 based hardware generation.
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add pinmux groups required for the Linux Automation GmbH TAC.
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The ksz switch driver allows specifying an interrupt line to prevent
having to periodically poll the switch for link ups/downs and other
asynchronous events.
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This allows the usage of properties like termination-gpios and
termination-ohms, which are specified in can-controller.yaml
but were previously not usable due to additionalProperties: false.
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Suggested-by: Rob Herring <robh@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Chandrasekar Ramakrishnan <rcsekar@samsung.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
CFG_STM32MP1_SCMI_SHM_SYSRAM will be disabled by default for STM32MP13x
SoCs in future OP-TEE version and the OP-TEE SMCI server uses only
the OP-TEE native shared memory registered by clients.
To be compatible by default with this configuration this patch removes
the shared memory in the SCMI configuration and the associated reserved
memory in SRAM.
Fixes: 9005aeddd9fc ("ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP13")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Since the OP-TEE commit "plat-stm32mp1: scmi_server: default use OP-TEE
shared memory", integrated in OP-TEE 3.22.0-rc1, the default configuration
for STM32MP15x SoCs changes and CFG_STM32MP1_SCMI_SHM_SYSRAM is disabled
by default and the OP-TEE SMCI server uses OP-TEE native shared memory
registered by clients.
To be compatible with this configuration and the next OP-TEE versions,
this patch removes in the STM32MP15 SCMI device tree the SHMEM used by
OP-TEE SCMI and the associated reserved memory in the last 4KByte page
of SRAM.
Fixes: ea3414e1249e ("ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
We just sorted the entries and fields last release, so just out of a
perverse sense of curiosity, I decided to see if we can keep things
ordered for even just one release.
The answer is "No. No we cannot".
I suggest that all kernel developers will need weekly training sessions,
involving a lot of Big Bird and Sesame Street. And at the yearly
maintainer summit, we will all sing the alphabet song together.
I doubt I will keep doing this. At some point "perverse sense of
curiosity" turns into just a cold dark place filled with sadness and
despair.
Repeats: 80e62bc8487b ("MAINTAINERS: re-sort all entries and fields")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- swiotlb area sizing fixes (Petr Tesarik)
-----BEGIN PGP SIGNATURE-----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=4Lfc
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- swiotlb area sizing fixes (Petr Tesarik)
* tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: reduce the number of areas to match actual memory pool size
swiotlb: always set the number of areas before allocating the pool
boot reordering work
-----BEGIN PGP SIGNATURE-----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=RZFV
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu fix from Borislav Petkov:
- Do FPU AP initialization on Xen PV too which got missed by the recent
boot reordering work
* tag 'x86_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/xen: Fix secondary processors' FPU initialization
On shutdown or kexec, the kernel tries to park the non-boot CPUs with an
INIT IPI. But the same code path is also used by the crash utility. If the
CPU which panics is not the boot CPU then it sends an INIT IPI to the boot
CPU which resets the machine. Prevent this by validating that the CPU which
runs the stop mechanism is the boot CPU. If not, leave the other CPUs in
HLT.
-----BEGIN PGP SIGNATURE-----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=DOCF
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix for the mechanism to park CPUs with an INIT IPI.
On shutdown or kexec, the kernel tries to park the non-boot CPUs with
an INIT IPI. But the same code path is also used by the crash utility.
If the CPU which panics is not the boot CPU then it sends an INIT IPI
to the boot CPU which resets the machine.
Prevent this by validating that the CPU which runs the stop mechanism
is the boot CPU. If not, leave the other CPUs in HLT"
* tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/smp: Don't send INIT to boot CPU
* Fix an uninitialized variable warning.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZKjUjwAKCRBKO3ySh0YR
pn92AQC4gY9GOyKcc/aiAd/t1u8gGxnFtcN06xh4TdVArMM4/AD/UtEKx9LYuaSF
pyhw5SfzxI555HfXkA8ci/D+BxguVQs=
=/vX1
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Darrick Wong:
"Nothing exciting here, just getting rid of a gcc warning that I got
tired of seeing when I turn on gcov"
* tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix uninit warning in xfs_growfs_data
-----BEGIN PGP SIGNATURE-----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=F8D0
-----END PGP SIGNATURE-----
Merge tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- fix potential use after free in unmount
- minor cleanup
- add worker to cleanup stale directory leases
* tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Add a laundromat thread for cached directories
smb: client: remove redundant pointer 'server'
cifs: fix session state transition to avoid use-after-free issue
Lockdep is certainly right to complain about
(&vma->vm_lock->lock){++++}-{3:3}, at: vma_start_write+0x2d/0x3f
but task is already holding lock:
(&mapping->i_mmap_rwsem){+.+.}-{3:3}, at: mmap_region+0x4dc/0x6db
Invert those to the usual ordering.
Fixes: 33313a747e81 ("mm: lock newly mapped VMA which can be modified after it becomes visible")
Cc: stable@vger.kernel.org
Signed-off-by: Hugh Dickins <hughd@google.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZKmgXAAKCRDdBJ7gKXxA
joqDAP0V520Jy0cyJrRMvaQRFMqtVeDOdTpAue7ZOQHSi/LZnAD9EEAxDpYF/V4x
PO27ixXQ4Glm2iYgH7bDX7J73WiA3wg=
=JsYW
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"16 hotfixes. Six are cc:stable and the remainder address post-6.4
issues"
The merge undoes the disabling of the CONFIG_PER_VMA_LOCK feature, since
it was all hopefully fixed in mainline.
* tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib: dhry: fix sleeping allocations inside non-preemptable section
kasan, slub: fix HW_TAGS zeroing with slub_debug
kasan: fix type cast in memory_is_poisoned_n
mailmap: add entries for Heiko Stuebner
mailmap: update manpage link
bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page
MAINTAINERS: add linux-next info
mailmap: add Markus Schneider-Pargmann
writeback: account the number of pages written back
mm: call arch_swap_restore() from do_swap_page()
squashfs: fix cache race with migration
mm/hugetlb.c: fix a bug within a BUG(): inconsistent pte comparison
docs: update ocfs2-devel mailing list address
MAINTAINERS: update ocfs2-devel mailing list address
mm: disable CONFIG_PER_VMA_LOCK until its fixed
fork: lock VMAs of the parent process when forking
When forking a child process, the parent write-protects anonymous pages
and COW-shares them with the child being forked using copy_present_pte().
We must not take any concurrent page faults on the source vma's as they
are being processed, as we expect both the vma and the pte's behind it
to be stable. For example, the anon_vma_fork() expects the parents
vma->anon_vma to not change during the vma copy.
A concurrent page fault on a page newly marked read-only by the page
copy might trigger wp_page_copy() and a anon_vma_prepare(vma) on the
source vma, defeating the anon_vma_clone() that wasn't done because the
parent vma originally didn't have an anon_vma, but we now might end up
copying a pte entry for a page that has one.
Before the per-vma lock based changes, the mmap_lock guaranteed
exclusion with concurrent page faults. But now we need to do a
vma_start_write() to make sure no concurrent faults happen on this vma
while it is being processed.
This fix can potentially regress some fork-heavy workloads. Kernel
build time did not show noticeable regression on a 56-core machine while
a stress test mapping 10000 VMAs and forking 5000 times in a tight loop
shows ~5% regression. If such fork time regression is unacceptable,
disabling CONFIG_PER_VMA_LOCK should restore its performance. Further
optimizations are possible if this regression proves to be problematic.
Suggested-by: David Hildenbrand <david@redhat.com>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://lore.kernel.org/all/dbdef34c-3a07-5951-e1ae-e9c6e3cdf51b@kernel.org/
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Closes: https://lore.kernel.org/all/b198d649-f4bf-b971-31d0-e8433ec2a34c@applied-asynchrony.com/
Reported-by: Jacob Young <jacobly.alt@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217624
Fixes: 0bff0aaea03e ("x86/mm: try VMA lock-based page fault handling first")
Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mmap_region adds a newly created VMA into VMA tree and might modify it
afterwards before dropping the mmap_lock. This poses a problem for page
faults handled under per-VMA locks because they don't take the mmap_lock
and can stumble on this VMA while it's still being modified. Currently
this does not pose a problem since post-addition modifications are done
only for file-backed VMAs, which are not handled under per-VMA lock.
However, once support for handling file-backed page faults with per-VMA
locks is added, this will become a race.
Fix this by write-locking the VMA before inserting it into the VMA tree.
Other places where a new VMA is added into VMA tree do not modify it
after the insertion, so do not need the same locking.
Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With recent changes necessitating mmap_lock to be held for write while
expanding a stack, per-VMA locks should follow the same rules and be
write-locked to prevent page faults into the VMA being expanded. Add
the necessary locking.
Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A few late arriving patches that missed the initial pull request.
It's mostly bug fixes (the dt-bindings is a fix for the initial pull).
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZKmvwSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishResAQCPDbBh
omMRBE+W+Vx2TgOJGjo/F+T1D2JjBhLIGpNVggEApJtgrQutAToiCU/qIP9GOTl7
evetzh5boMMuyD2s7ak=
=pi4v
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"A few late arriving patches that missed the initial pull request. It's
mostly bug fixes (the dt-bindings is a fix for the initial pull)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Remove unused function declaration
scsi: target: docs: Remove tcm_mod_builder.py
scsi: target: iblock: Quiet bool conversion warning with pr_preempt use
scsi: dt-bindings: ufs: qcom: Fix ICE phandle
scsi: core: Simplify scsi_cdl_check_cmd()
scsi: isci: Fix comment typo
scsi: smartpqi: Replace one-element arrays with flexible-array members
scsi: target: tcmu: Replace strlcpy() with strscpy()
scsi: ncr53c8xx: Replace strlcpy() with strscpy()
scsi: lpfc: Fix lpfc_name struct packing
* xiic patch should have been in part 1 but slipped through
* mpc patch fixes a build regression from part 1
* nomadik is a fix which needed a rebase after part 1
-----BEGIN PGP SIGNATURE-----
iQJDBAABCgAtFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmSoblYPHHdzYUBrZXJu
ZWwub3JnAAoJEBQN5MwUoCm2iG0P/RG3yGeV0PzQ2XbKPwIMAQURQ7NiqVVrAnUP
kkduOkPJ9QU+9Qjb/4SRCTxWFVFbqruyOZWB+5hmwHtv4MS3H1ulKaH9bat5bQsF
F28o5pjMVQEhjl+Y1jAtnSOlhprbTds6B1NdgbMFopnQ7ExlB1/RAt0rvZdgsfkt
WeKRQMlne0mpQ7mybp6qsN8ldYBSDu8AmZ0S/RSnCwRwl0AxYYxk5roQAfg0tbaU
N1zWUerNO7lAVoJnFsdeo0CMxK7t3QGHPSZGayargEF0KJHmxfzU14oZ6l28j6wq
mSazjyK5wTeqqa4mU835RO9Ko6zE42u5nM+ok8Ui6a4xWjvafNrjnZkIClMg2eC9
7ESZoz+Rtd3kCu3LiWXqPhs9cplHrRtA4M8E4gbTbsdMB8kFRaaiocjHfPksO8SG
QtFXHGV5AgtoBkCC3womZWvY17XOZf40S6NUFafZ8kZFg5WGCWP3rwUZhz/+frSM
QiIdxM+cER6WC6ADnZHdQyFl1fjLc4EdbwoN54E7DRBqB4s0wy+1vU+/qf9JdIuR
zIN0I2OFxnwFEiTfAlTX1RmYy7L/3dtP2Gk8og+W9CxHSwJsURhqIfz/MjNuoh7U
c11jS9QfETBj2GDjRoRxE0zj4Q2rhjdTwFhQfuYp0eI6UsDfYHHB7ql2FwO1+EW1
VkmkX38T
=xwp6
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.5-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
- xiic patch should have been in the original pull but slipped through
- mpc patch fixes a build regression
- nomadik cleanup
* tag 'i2c-for-6.5-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mpc: Drop unused variable
i2c: nomadik: Remove a useless call in the remove function
i2c: xiic: Don't try to handle more interrupt events after error
The debugfs_create_dir function returns ERR_PTR in case of error, and the
only correct way to check if an error occurred is 'IS_ERR' inline function.
This patch will replace the null-comparison with IS_ERR.
Signed-off-by: Anup Sharma <anupnewsmail@gmail.com>
Suggested-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Build:
- Allow to generate vmlinux.h from BTF using `make GEN_VMLINUX_H=1`
and skip if the vmlinux has no BTF.
- Replace deprecated clang -target xxx option by --target=xxx.
perf record:
- Print event attributes with well known type and config symbols in the
debug output like below:
# perf record -e cycles,cpu-clock -C0 -vv true
<SNIP>
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0 (PERF_COUNT_HW_CPU_CYCLES)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 5
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0 (PERF_COUNT_SW_CPU_CLOCK)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
- Update AMD IBS event error message since it now support per-process
profiling but no priviledge filters.
$ sudo perf record -e ibs_op//k -C 0
Error:
AMD IBS doesn't support privilege filtering. Try again without
the privilege modifiers (like 'k') at the end.
perf lock contention:
- Support CSV style output using -x option
$ sudo perf lock con -ab -x, sleep 1
# output: contended, total wait, max wait, avg wait, type, caller
19, 194232, 21415, 10222, spinlock, process_one_work+0x1f0
15, 162748, 23843, 10849, rwsem:R, do_user_addr_fault+0x40e
4, 86740, 23415, 21685, rwlock:R, ep_poll_callback+0x2d
1, 84281, 84281, 84281, mutex, iwl_mvm_async_handlers_wk+0x135
8, 67608, 27404, 8451, spinlock, __queue_work+0x174
3, 58616, 31125, 19538, rwsem:W, do_mprotect_pkey+0xff
3, 52953, 21172, 17651, rwlock:W, do_epoll_wait+0x248
2, 30324, 19704, 15162, rwsem:R, do_madvise+0x3ad
1, 24619, 24619, 24619, spinlock, rcu_core+0xd4
- Add --output option to save the data to a file not to be interfered
by other debug messages.
Test:
- Fix event parsing test on ARM where there's no raw PMU nor supports
PERF_PMU_CAP_EXTENDED_HW_TYPE.
- Update the lock contention test case for CSV output.
- Fix a segfault in the daemon command test.
Vendor events (JSON):
- Add has_event() to check if the given event is available on system
at runtime. On Intel machines, some transaction events may not be
present when TSC extensions are disabled.
- Update Intel event metrics.
Misc:
- Sort symbols by name using an external array of pointers instead of
a rbtree node in the symbol. This will save 16-bytes or 24-bytes
per symbol whether the sorting is actually requested or not.
- Fix unwinding DWARF callstacks using libdw when --symfs option is
used.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCZKb4mwAKCRCMstVUGiXM
g1QqAPwKZow/DhAzyN7KvzdNd+SojRGpUMl6RkVphY/9ntDqPAD+L3V5aXLTiC1L
8kUzdpRX5VMjqdR9U7TycUOi4QU40QA=
=dEF1
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.5-2-2023-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next
Pull more perf tools updates from Namhyung Kim:
"These are remaining changes and fixes for this cycle.
Build:
- Allow generating vmlinux.h from BTF using `make GEN_VMLINUX_H=1`
and skip if the vmlinux has no BTF.
- Replace deprecated clang -target xxx option by --target=xxx.
perf record:
- Print event attributes with well known type and config symbols in
the debug output like below:
# perf record -e cycles,cpu-clock -C0 -vv true
<SNIP>
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0 (PERF_COUNT_HW_CPU_CYCLES)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 5
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0 (PERF_COUNT_SW_CPU_CLOCK)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
- Update AMD IBS event error message since it now support per-process
profiling but no priviledge filters.
$ sudo perf record -e ibs_op//k -C 0
Error:
AMD IBS doesn't support privilege filtering. Try again without
the privilege modifiers (like 'k') at the end.
perf lock contention:
- Support CSV style output using -x option
$ sudo perf lock con -ab -x, sleep 1
# output: contended, total wait, max wait, avg wait, type, caller
19, 194232, 21415, 10222, spinlock, process_one_work+0x1f0
15, 162748, 23843, 10849, rwsem:R, do_user_addr_fault+0x40e
4, 86740, 23415, 21685, rwlock:R, ep_poll_callback+0x2d
1, 84281, 84281, 84281, mutex, iwl_mvm_async_handlers_wk+0x135
8, 67608, 27404, 8451, spinlock, __queue_work+0x174
3, 58616, 31125, 19538, rwsem:W, do_mprotect_pkey+0xff
3, 52953, 21172, 17651, rwlock:W, do_epoll_wait+0x248
2, 30324, 19704, 15162, rwsem:R, do_madvise+0x3ad
1, 24619, 24619, 24619, spinlock, rcu_core+0xd4
- Add --output option to save the data to a file not to be interfered
by other debug messages.
Test:
- Fix event parsing test on ARM where there's no raw PMU nor supports
PERF_PMU_CAP_EXTENDED_HW_TYPE.
- Update the lock contention test case for CSV output.
- Fix a segfault in the daemon command test.
Vendor events (JSON):
- Add has_event() to check if the given event is available on system
at runtime. On Intel machines, some transaction events may not be
present when TSC extensions are disabled.
- Update Intel event metrics.
Misc:
- Sort symbols by name using an external array of pointers instead of
a rbtree node in the symbol. This will save 16-bytes or 24-bytes
per symbol whether the sorting is actually requested or not.
- Fix unwinding DWARF callstacks using libdw when --symfs option is
used"
* tag 'perf-tools-for-v6.5-2-2023-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next: (38 commits)
perf test: Fix event parsing test when PERF_PMU_CAP_EXTENDED_HW_TYPE isn't supported.
perf test: Fix event parsing test on Arm
perf evsel amd: Fix IBS error message
perf: unwind: Fix symfs with libdw
perf symbol: Fix uninitialized return value in symbols__find_by_name()
perf test: Test perf lock contention CSV output
perf lock contention: Add --output option
perf lock contention: Add -x option for CSV style output
perf lock: Remove stale comments
perf vendor events intel: Update tigerlake to 1.13
perf vendor events intel: Update skylakex to 1.31
perf vendor events intel: Update skylake to 57
perf vendor events intel: Update sapphirerapids to 1.14
perf vendor events intel: Update icelakex to 1.21
perf vendor events intel: Update icelake to 1.19
perf vendor events intel: Update cascadelakex to 1.19
perf vendor events intel: Update meteorlake to 1.03
perf vendor events intel: Add rocketlake events/metrics
perf vendor metrics intel: Make transaction metrics conditional
perf jevents: Support for has_event function
...
Fixes for different bitmap pieces:
- lib/test_bitmap: increment failure counter properly
The tests that don't use expect_eq() macro to determine that a test is
failured must increment failed_tests explicitly.
- lib/bitmap: drop optimization of bitmap_{from,to}_arr64
bitmap_{from,to}_arr64() optimization is overly optimistic on 32-bit LE
architectures when it's wired to bitmap_copy_clear_tail().
- nodemask: Drop duplicate check in for_each_node_mask()
As the return value type of first_node() became unsigned, the node >= 0
became unnecessary.
- cpumask: fix function description kernel-doc notation
- MAINTAINERS: Add bits.h to the BITMAP API record
- MAINTAINERS: Add bitfield.h to the BITMAP API record
Add linux/bits.h and linux/bitfield.h for visibility
-----BEGIN PGP SIGNATURE-----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=nZF4
-----END PGP SIGNATURE-----
Merge tag 'bitmap-6.5-rc1' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov:
"Fixes for different bitmap pieces:
- lib/test_bitmap: increment failure counter properly
The tests that don't use expect_eq() macro to determine that a test
is failured must increment failed_tests explicitly.
- lib/bitmap: drop optimization of bitmap_{from,to}_arr64
bitmap_{from,to}_arr64() optimization is overly optimistic
on 32-bit LE architectures when it's wired to
bitmap_copy_clear_tail().
- nodemask: Drop duplicate check in for_each_node_mask()
As the return value type of first_node() became unsigned, the node
>= 0 became unnecessary.
- cpumask: fix function description kernel-doc notation
- MAINTAINERS: Add bits.h and bitfield.h to the BITMAP API record
Add linux/bits.h and linux/bitfield.h for visibility"
* tag 'bitmap-6.5-rc1' of https://github.com/norov/linux:
MAINTAINERS: Add bitfield.h to the BITMAP API record
MAINTAINERS: Add bits.h to the BITMAP API record
cpumask: fix function description kernel-doc notation
nodemask: Drop duplicate check in for_each_node_mask()
lib/bitmap: drop optimization of bitmap_{from,to}_arr64
lib/test_bitmap: increment failure counter properly
The Smatch static checker reports the following warnings:
lib/dhry_run.c:38 dhry_benchmark() warn: sleeping in atomic context
lib/dhry_run.c:43 dhry_benchmark() warn: sleeping in atomic context
Indeed, dhry() does sleeping allocations inside the non-preemptable
section delimited by get_cpu()/put_cpu().
Fix this by using atomic allocations instead.
Add error handling, as atomic these allocations may fail.
Link: https://lkml.kernel.org/r/bac6d517818a7cd8efe217c1ad649fffab9cc371.1688568764.git.geert+renesas@glider.be
Fixes: 13684e966d46283e ("lib: dhry: fix unstable smp_processor_id(_) usage")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/0469eb3a-02eb-4b41-b189-de20b931fa56@moroto.mountain
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
