IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 58577966a42fc0b660b5e2c7c9e5a2241363ea83 ]
Currently the DT for QCS404 SoC has setup for 2 USB2 PHYs with one each
assigned to USB3 controller and USB2 controller. This assignment is
incorrect which only works by luck: as when each USB HCI comes up it
configures the *other* controllers PHY which is enough to make them
happy. If, for any reason, we were to disable one of the controllers then
both would stop working.
This was a difficult inconsistency to be caught which was found while
trying to enable USB support in u-boot. So with all the required drivers
ported to u-boot, I couldn't get the same USB storage device enumerated
in u-boot which was being enumerated fine by the kernel.
The root cause of the problem came out to be that I wasn't enabling USB2
PHY: "usb2_phy_prim" in u-boot. Then I realised that via simply disabling
the same USB2 PHY currently assigned to USB2 host controller in the
kernel disabled enumeration for USB3 host controller as well.
So fix this inconsistency by correctly assigning USB2 PHYs.
Fixes: 9375e7d719b3 ("arm64: dts: qcom: qcs404: Add USB devices and PHYs")
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220711083038.1518529-1-sumit.garg@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2aa54fa87cca1fa43870a9caf4fcce00eb087fa5 ]
These voltages are not a multiple of the given step-size 8000 (with base
voltage 1664000) in pm8998_pldo, resulting in PLDO regulators l18 and
l22 failing to validate and in turn not probing the rpm-pm8998-regulator
driver:
l18: unsupportable voltage constraints 2856000-2848000uV
qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: l18: devm_regulator_register() failed, ret=-22
Round the voltages down for the sake of erring on the safe side, leaving
a comment in place to document this discrepancy wrt downstream sources.
Fixes: 390883af89d2 ("arm64: dts: qcom: msm8998: Introduce support for Sony Yoshino platform")
Reported-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220507153627.1478268-1-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b415bb7c976f1d595ed752001c0938f702645dab ]
Hook SDMMC1 CD up with CVM GPIO02 (SOC_GPIO11) used for card detection on J4
(uSD socket) on the carrier.
Fixes: ef633bfc21e9 ("arm64: tegra: Enable card detect for SD card on P2888")
Signed-off-by: Tamás Szűcs <tszucs@protonmail.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61192a9d8a6367ae1b8234876941b037910a2459 ]
The Tegra SYSRAM contains regions access to which is restricted to
certain hardware blocks on the system, and speculative accesses to
those will cause issues.
Patch 'misc: sram: Only map reserved areas in Tegra SYSRAM' attempted
to resolve this by only mapping the regions specified in the device
tree on the assumption that there are no such restricted areas within
the 64K-aligned area of memory that contains the memory we wish to map.
Turns out this assumption is wrong, as there are such areas above the
4K pages described in the device trees. As such, we need to use the
bigger hammer that is no-memory-wc, which causes the memory to be
mapped as Device memory to which speculative accesses are disallowed.
As such, the previous patch in the series,
'firmware: tegra: bpmp: do only aligned access to IPC memory area',
is required with this patch to make the BPMP driver only issue aligned
memory accesses as those are also required with Device memory.
Fixes: fec29bf04994 ("misc: sram: Only map reserved areas in Tegra SYSRAM")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c98e6e683632386a3bd284acda4342e68aec4c41 ]
The bananapi R64 (BPI-R64) experiences wrong WPS button signals.
In OpenWrt pushing the WPS button while powering on the device will set
it to recovery mode. Currently, this also happens without any user
interaction. In particular, the wrong signals appear while booting the
device or restarting it, e.g. after doing a system upgrade. If the
device is in recovery mode the user needs to manually power cycle or
restart it.
The official BPI-R64 sources set the WPS button to GPIO_ACTIVE_LOW in
the device tree. This setting seems to suppress the unwanted WPS button
press signals. So this commit changes the button from GPIO_ACTIVE_HIGH to
GPIO_ACTIVE_LOW.
The official BPI-R64 sources can be found on
https://github.com/BPI-SINOVOIP/BPI-R64-openwrt
Fixes: 0b6286dd96c0 ("arm64: dts: mt7622: add bananapi BPI-R64 board")
Suggested-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Nick Hainke <vincent@systemli.org>
Link: https://lore.kernel.org/r/20220630111746.4098-1-vincent@systemli.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b874fff9a7683df30e5aff16d5a85b1f8a43aa5d ]
The commit 82d61e19fccb ("arm64: dts: qcom: msm8996: Move '#clock-cells'
to QMP PHY child node") moved the '#clock-cells' properties to the child
nodes. However it missed the fact that the property must have been set
to <0> (as all pipe clocks use of_clk_hw_simple_get as the xlate
function. Also the mentioned commit didn't add '#clock-cells' properties
to second and third PCIe PHY nodes. Correct both these mistakes:
- Set '#clock-cells' to <0>,
- Add the property to pciephy_1 and pciephy_2 nodes.
Fixes: 82d61e19fccb ("arm64: dts: qcom: msm8996: Move '#clock-cells' to QMP PHY child node")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220620071936.1558906-3-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbfb5668aece448877fa7826cde81c9d06f4a4ac ]
According to qcom,sm6125-pinctrl.yaml all nodes inside the tlmm must be
suffixed by -state:
qcom/sm6125-sony-xperia-seine-pdx201.dtb: pinctrl@500000: 'sdc2-off', 'sdc2-on' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
The label names have been updated to match, going from sdc2_state_X to
sdc2_X_state.
Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125")
Fixes: 82e1783890b7 ("arm64: dts: qcom: sm6125: Add support for Sony Xperia 10II")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220508100336.127176-2-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6990640a93ba4e76dd62ca3ea1082a7354db09d7 ]
Both the sdc2-on and sdc2-off pinctrl nodes are used by the
sdhci@4784000 node in sm6125.dtsi. Surprisingly sdc2-off is defined in
sm6125, yet its sdc2-on counterpart is only defined in board-specific DT
for the Sony Seine PDX201 board/device resulting in an "undefined label
&sdc2_state_on" error if sm6125.dtsi were included elsewhere.
This sm6125 base dtsi should not rely on externally defined labels; the
properties referencing it should then also be written externally.
Since the sdc2-on pin configuration is board-independent just like
sdc2-off, move it from seine-pdx201.dts into sm6125.dtsi.
The SDCard-detect pin (gpio98) is however board-specific, and remains as
an overwrite in seine-pdx201.dts for both the on and off state.
As a drive-by cleanup, reorder bias- and drive-strength properties.
Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125")
Fixes: 82e1783890b7 ("arm64: dts: qcom: sm6125: Add support for Sony Xperia 10II")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220508100336.127176-1-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba205449828f47f80532a1453beef5eed2982176 ]
They should be started with "gpp5-".
Fixes: 31bbac5263aa ("arm64: dts: exynos: add initial support for exynosautov9 SoC")
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220627005832.8709-1-chanho61.park@samsung.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5458d6f2827cd30218570f266b8d238417461f2f ]
The smem-state properties for the pronto node were incorrectly labelled,
reading `qcom,state*` rather than `qcom,smem-state*`. Fix that, allowing
the stop state to be used.
Fixes: 88106096cbf8 ("ARM: dts: msm8916: Add and enable wcnss node")
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220526141740.15834-3-sireeshkodali1@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f48cb21a28c07d0754d5f2f85444cfb0e7b1fd05 ]
The highest-performance mode for the Cortex-A57 CPU cores supported on
R-Car H3Ne (R8A779M8) is the Power Optimized (1.5 GHz) mode. The Normal
(1.6 GHz) and High Performance (1.7 GHz) modes are not supported.
Hence drop the "turbo-mode" entries from the operating points table
inherited from r8a77951.dtsi.
Fixes: 6e87525d751fac57 ("arm64: dts: renesas: Add Renesas R8A779M8 SoC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/aeb4530f7fbac8329b334dcb169382c836a5f32d.1655458564.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cd1c4f41d64a40ea6bc4575ae28e37542123d77 ]
ICC path for the GPU incorrectly states <&gnoc 1 &bimc 5>, which is
a path from SLAVE_GNOC_BIMC to SLAVE_EBI. According to the downstream
kernel sources, the GPU uses MASTER_OXILI here, which is equivalent to
<&bimc 1 ...>.
While we are at it, use defined names instead of the numbers for this
interconnect path.
Fixes: 5cf69dcbec8b ("arm64: dts: qcom: sdm630: Add Adreno 508 GPU configuration")
Reported-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521202708.1509308-8-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c047919763b4548381d1ab3320af1df66ab83df ]
The SoC's device tree file disables gpucc and adreno's SMMU by default.
So let's disable the GPU too. Moreover it looks like SMMU might be not
usable without additional patches (which means that GPU is unusable
too). No board uses GPU at this moment.
Fixes: 5cf69dcbec8b ("arm64: dts: qcom: sdm630: Add Adreno 508 GPU configuration")
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521202708.1509308-4-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4148a9eeb15152865d60b0913d96beb7ca166f9a ]
2700000 is not a multiple of pmic4_pldo's step size of 8000 (with base
voltage 1664000), resulting in pm8998-rpmh-regulators not probing. Just
as we did with MSM8998's Sony Yoshino Poplar [1], round the voltages
down to err on the cautious side and leave a comment in place to
document this discrepancy wrt downstream sources.
[1]: https://lore.kernel.org/linux-arm-msm/20220507153627.1478268-1-marijn.suijten@somainline.org/
Fixes: 30a7f99befc6 ("arm64: dts: qcom: Add support for SONY Xperia XZ2 / XZ2C / XZ3 (Tama platform)")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220620211212.269956-1-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e60414644cf3a703e10ed4429c15263095945ffe ]
We don't use this carveout on trogdor boards, and having it defined in
the sc7180 SoC file causes an overlap message to be printed at boot.
OF: reserved mem: OVERLAP DETECTED!
memory@86000000 (0x0000000086000000--0x000000008ec00000) overlaps with memory@8b700000 (0x000000008b700000--0x000000008b710000)
Delete the node in the trogdor dtsi file to fix the overlap problem and
remove the error message.
Cc: Alex Elder <elder@linaro.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Fixes: 310b266655a3 ("arm64: dts: qcom: sc7180: define ipa_fw_mem node")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517193307.3034602-1-swboyd@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e599740f7e423ee89fb027896cb2635dd43784f ]
The entry-method property of the idle-states node should be "psci" as
described in the idle-states binding, since this is already the value of
enable-method in the CPU nodes. Fix it to get rid of a dtbs_check
warning.
Fixes: 9260918d3a4f ("arm64: dts: mt8192: Add cpu-idle-states")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220617233150.2466344-3-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 399e23ad51caaf62400a531c9268ad3c453c3d76 ]
Tweak the name of the idle-states subnodes so that they follow the
binding pattern, getting rid of dtbs_check warnings.
Only the usage of "-" in the name was necessary, but "off" was also
exchanged for "sleep" since that seems to be a more common wording in
other dts files.
Fixes: 9260918d3a4f ("arm64: dts: mt8192: Add cpu-idle-states")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220617233150.2466344-2-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62e8a53431145e06e503b71625a34eaa87b72b2c ]
"make dtbs_check":
arch/arm64/boot/dts/renesas/r8a774c0-cat874.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[74], [0]] is too long
arch/arm64/boot/dts/renesas/r8a774c0-ek874.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[79], [0]] is too long
arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[82], [0]] is too long
arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[87], [0]] is too long
arch/arm64/boot/dts/renesas/r8a77990-ebisu.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[105], [0]] is too long
From schema: Documentation/devicetree/bindings/thermal/thermal-zones.yaml
Indeed, the thermal sensors on R-Car E3 and RZ/G2E support only a single
zone, hence #thermal-sensor-cells = <0>.
Fix this by dropping the bogus zero cell from the thermal sensor
specifiers.
Fixes: 8fa7d18f9ee2dc20 ("arm64: dts: renesas: r8a77990: Create thermal zone to support IPA")
Fixes: 8438bfda9d768157 ("arm64: dts: renesas: r8a774c0: Create thermal zone to support IPA")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/28b812fdd1fc3698311fac984ab8b91d3d655c1c.1655301684.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7512af9f78dedea7e04225f665dad6750df7d095 ]
Currently there are two nodes named "regulator_camera". This causes the
former to be overwritten by the latter.
Fix this by renaming them to unique names, using the preferred hyphen
instead of an underscore.
While at it, update the name of the audio regulator (which was added in
the same commit) to use a hyphen.
Fixes: a1d8a344f1ca0709 ("arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/a9ac82bdf108162487289d091c53a9b3de393f13.1652263918.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8eb2df19fbf97aa1e950cf491232c2e3bef8357 ]
"status" does not match any pattern in the gpio-leds binding. Rename the
node to the preferred pattern. This fixes a `make dtbs_check` error.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702132816.46456-1-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b39961659ffc3c3a9e3d0d43b0476547b5f35d49 ]
Per schema it should be nand-controller@79b0000 instead of nand@79b0000.
Fix it to match nand-controller.yaml requirements.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220621120642.518575-1-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ba93ba9f63fbc44c3a6af7fe6f2536d009cfd5a ]
The AOSS QMP bindings expect all compatibles to be followed by fallback
"qcom,aoss-qmp" because all of these are actually compatible with each
other. This fixes dtbs_check warnings like:
sm8250-hdk.dtb: power-controller@c300000: compatible: ['qcom,sm8250-aoss-qmp'] is too short
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220504131923.214367-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c54f1711fc2516faf1f8d31217462184157b429 ]
To ease matching configuration of sysfs attributes for particular
sensor, match label reported by iio 'label' attribute with the location
label generated by ChromeOS config tool.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220623223119.1858863-1-gwendal@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 458ebdbb8e5d596a462d8125cec74142ff5dfa97 ]
There's no reason the timer needs > 32-bits of address or size.
Since we using 32-bit size, we need to define ranges properly.
Fixes warnings as:
```
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: timer@17c90000: #size-cells:0:0: 1 was expected
From schema: Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
```
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220626105800.35586-1-david@ixit.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fe17b91a7777df140d0f1433991da67ba658796c upstream.
An interrupt for USB device are shared with USB host. Set interrupt-names
property to common "dwc_usb3" instead of "host" and "peripheral".
Cc: stable@vger.kernel.org
Fixes: d7b9beb830d7 ("arm64: dts: uniphier: Add USB3 controller nodes")
Reported-by: Ryuta NAKANISHI <nakanishi.ryuta@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
for 5.19, please pull the following:
- William corrects the BCM4906 DTS to have an armv8-timer Device Tree,
necessary for booting, and fixes the BCM4908 DTS to have a proper
'enable-method' and 'cpu-release-addr' properties for the kernel to boot
when using u-boot
-----BEGIN PGP SIGNATURE-----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=iorV
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=SOlL
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.19/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM64-based SoCs Device Tree fixes
for 5.19, please pull the following:
- William corrects the BCM4906 DTS to have an armv8-timer Device Tree,
necessary for booting, and fixes the BCM4908 DTS to have a proper
'enable-method' and 'cpu-release-addr' properties for the kernel to boot
when using u-boot
* tag 'arm-soc/for-5.19/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm4908: Fix cpu node for smp boot
arm64: dts: broadcom: bcm4908: Fix timer node for BCM4906 SoC
Link: https://lore.kernel.org/r/20220712231222.97850-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add spin-table enable-method and cpu-release-addr properties for
cpu0 node. This is required by all ARMv8 SoC. Otherwise some
bootloader like u-boot can not update cpu-release-addr and linux
fails to start up secondary cpus.
Fixes: 2961f69f151c ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The cpu mask value in interrupt property inherits from bcm4908.dtsi
which sets to four cpus. Correct the value to two cpus for dual core
BCM4906 SoC.
Fixes: c8b404fb05dc ("arm64: dts: broadcom: bcm4908: add BCM4906 Netgear R8000P DTS files")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The clocks property is now mandatory. Add it to avoid warning message.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Fixes: eba5bea8f37f ("arm64: dts: ls1028a: add efuse node")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This removes duplicate includes in the sc7180-trogdor files, which
accidentally ended up disabling nodes intended to be enabled.
It corrects identifiers for CPU6/7 on MSM8994. On SM8450 the UFS node's
interconnects property is updated to match the #interconnect-cells,
avoiding sync_state issues and the GIC ITS is defined, to correct the
references from the PCIe nodes. On SDM845 the display subsystem's AHB
clock is corrected and on msm8992 devices, the supplies for lvs 1 and 2
are correctly specified.
Lastly, a welcome addition of Konrad as reviewer for the Qualcomm SoC.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmLBBmobHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FuvsQAKP6BXA5FQ13nHdfFh38
kgNdw93SIn49MW7jxHbnYRXxxW0j1SxxipQAZmlfChE3qptfjzaQcdtN/AboNLi8
sBT03vjoMPysoe9aLOEY3BLCsM/qB3AiP5jXEahu8P3RbU6cY69W8mUEoZhzBi3H
Cow0g0zg37R48W7DZkh+B0rDzFk48TGzbnrBCwrJ4PF3cciNVKZOWmBMA3Vm0741
vckIU1WCff3v56ZyAusv4wmDBq5Y0K5/PCx4xz3qoFXBXoH27I0XxywXgbb2tmtH
MqxeOjS+hwJePW3dqMs2h09z0Uf5NT2cgoobCMkNOl3j/0Dwrn0zINRxBVNCLVDq
h084fcFxKqQWWbN+SDO5QUIyPgAs/XVyG8nzEXE19XftOIu9NGfTBOYZZ2kWGZCM
IJIFfvxm6Xh73dd0afDRRMbxZrpLaBrq0vz4jF3A3Ycs7r5JEgsz18H1yo/YzGX0
sXlTdTBUEaHZnfhQNfsNdVXaFcXWu0gLmH/sh7nRd++9Gl4d0r0Ro9Q/ZYfThsRI
vWQWuhLq15JL2c/qGxK/BTHIdN/+d4v3pr5CirM+ijKUZjzyAsB6e6i6gf4WNEUi
EdDf3Sj7IWOIAx4/80Xg+r+4MfCW5ZWKGSxIlpYFX83bSh2uM2Zopjiwg1qxw70k
RgtLmTxsC22YnwWcks49OjWV
=sObb
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=+pwl
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 DT fixes for v5.19
This removes duplicate includes in the sc7180-trogdor files, which
accidentally ended up disabling nodes intended to be enabled.
It corrects identifiers for CPU6/7 on MSM8994. On SM8450 the UFS node's
interconnects property is updated to match the #interconnect-cells,
avoiding sync_state issues and the GIC ITS is defined, to correct the
references from the PCIe nodes. On SDM845 the display subsystem's AHB
clock is corrected and on msm8992 devices, the supplies for lvs 1 and 2
are correctly specified.
Lastly, a welcome addition of Konrad as reviewer for the Qualcomm SoC.
* tag 'qcom-arm64-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typo
MAINTAINERS: Add myself as a reviewer for Qualcomm ARM/64 support
arm64: dts: qcom: sdm845: use dispcc AHB clock for mdss node
arm64: dts: qcom: sm8450 add ITS device tree node
arm64: dts: qcom: msm8994: Fix CPU6/7 reg values
arm64: dts: qcom: sm8450: fix interconnects property of UFS node
arm64: dts: qcom: Remove duplicate sc7180-trogdor include on lazor/homestar
Link: https://lore.kernel.org/r/20220703030208.408109-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix the SDIO description for imx7d-smegw01 board to ensure there is
no communication made at 1.8V.
- Fix pgc_ispdwp power-domain clock, which should be
IMX8MP_CLK_MEDIA_ISP_ROOT.
- Re-enable framebuffer support in mxs_defconfig to fix a Kconfig
regression.
- A series from Peng Fan (and Sherry Sun) fixing various pads on i.MX8MP
based boards to leave reserved bits untouched.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmK7tGoUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6gQQgAsaOPV6XCcWJCf+BAJkZvk8ba4Q4C
F/fZHnqbXFUeQqjMckVv1b9UlGLw2uNeWoW0FfQ/p8WV+uDLIlpp19wpvJHKkTM1
U1zIBK0RdJiUrngfCrOedZwHmzg11D3aVn0gotEPbW+S+aXXcW5GXH0Tt2Z/v5mF
hKIxqW1KE+OUpCAoNIehgImFjKjS8fFX4vxMQ81bkdp9iLTNc6kvsHivyXk1wS2F
E5CmaWPlPGHjaKXWvUnh8rO2QstRNTZpYe1FbCheRGBcfT2U6VFPAMYc9EJNM64d
UKSHOsT4l+7D7Jk8CMMYftBII21fwX+Qs3PepE/rnND3WYygH09iFOHNDA==
=6inj
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ZOsU
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.19, round 2:
- Fix the SDIO description for imx7d-smegw01 board to ensure there is
no communication made at 1.8V.
- Fix pgc_ispdwp power-domain clock, which should be
IMX8MP_CLK_MEDIA_ISP_ROOT.
- Re-enable framebuffer support in mxs_defconfig to fix a Kconfig
regression.
- A series from Peng Fan (and Sherry Sun) fixing various pads on i.MX8MP
based boards to leave reserved bits untouched.
* tag 'imx-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct uart pad settings
arm64: dts: imx8mp-venice-gw74xx: correct pad settings
arm64: dts: imx8mp-evk: correct I2C3 pad settings
arm64: dts: imx8mp-evk: correct I2C1 pad settings
arm64: dts: imx8mp-evk: correct I2C5 pad settings
arm64: dts: imx8mp-evk: correct vbus pad settings
arm64: dts: imx8mp-evk: correct eqos pad settings
arm64: dts: imx8mp-evk: correct vbus pad settings
arm64: dts: imx8mp-evk: correct gpio-led pad settings
arm64: dts: imx8mp-evk: correct the uart2 pinctl value
arm64: dts: imx8mp-evk: correct mmc pad settings
ARM: mxs_defconfig: Enable the framebuffer
arm64: dts: imx8mp: correct clock of pgc_ispdwp
ARM: dts: imx7d-smegw01: Fix the SDIO description
Link: https://lore.kernel.org/r/20220629021244.GL819983@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
"make dtbs_check" complains about the missing "-supply" suffix for
vdd_lvs1_2 which is clearly a typo, originally introduced in the
msm8994-smd-rpm.dtsi file and apparently later copied to
msm8992-xiaomi-libra.dts:
msm8992-lg-bullhead-rev-10/101.dtb: pm8994-regulators: 'vdd_lvs1_2'
does not match any of the regexes:
'.*-supply$', '^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$', 'pinctrl-[0-9]+'
From schema: regulator/qcom,smd-rpm-regulator.yaml
msm8992-xiaomi-libra.dtb: pm8994-regulators: 'vdd_lvs1_2'
does not match any of the regexes:
'.*-supply$', '^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$', 'pinctrl-[0-9]+'
From schema: regulator/qcom,smd-rpm-regulator.yaml
Reported-by: Rob Herring <robh@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Fixes: f3b2c99e73be ("arm64: dts: Enable onboard SDHCI on msm8992")
Fixes: 0f5cdb31e850 ("arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220627135938.2901871-1-stephan.gerhold@kernkonzept.com
BIT3 and BIT0 are reserved bits, should not touch.
Fixes: 88f7f6bcca37 ("arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
BIT3 and BIT0 are reserved bits, should not touch.
Fixes: 6f96852619d5 ("arm64: dts: freescale: Add support EQOS MAC on phyBOARD-Pollux-i.MX8MP")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to RM bit layout, BIT3 and BIT0 are reserved.
8 7 6 5 4 3 2 1 0
PE HYS PUE ODE FSEL X DSE X
Should not set reserved bit.
Fixes: 7899eb6cb15d ("arm64: dts: imx: Add i.MX8M Plus Gateworks gw7400 dts support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to RM bit layout, BIT3 and BIT0 are reserved.
8 7 6 5 4 3 2 1 0
PE HYS PUE ODE FSEL X DSE X
Although function is not broken, we should not set reserved bit.
Fixes: 5e4a67ff7f69 ("arm64: dts: imx8mp-evk: Add i2c3 support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to RM bit layout, BIT3 and BIT0 are reserved.
8 7 6 5 4 3 2 1 0
PE HYS PUE ODE FSEL X DSE X
Although function is not broken, we should not set reserved bit.
Fixes: 5497bc2a2bff ("arm64: dts: imx8mp-evk: Add PMIC device")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to RM bit layout, BIT3 and BIT0 are reserved.
8 7 6 5 4 3 2 1 0
PE HYS PUE ODE FSEL X DSE X
Although function is not broken, we should not set reserved bit.
Fixes: 8134822db08d ("arm64: dts: imx8mp-evk: add support for I2C5")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to RM bit layout, BIT3 and BIT0 are reserved.
8 7 6 5 4 3 2 1 0
PE HYS PUE ODE FSEL X DSE X
Not set reserved bit.
Fixes: 9e847693c6f3 ("arm64: dts: freescale: Add i.MX8MP EVK board support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
