IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 94bed9bb05c7850ff5d80b87cc29004901f37956 ]
After merging lucid and trion pll functions in commit 0b01489475c6
("clk: qcom: clk-alpha-pll: same regs and ops for trion and lucid")
the function clk_trion_pll_configure() is left with an old description
header, which results in a W=2 compile time warning, fix it.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220701062711.2757855-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bc308ebc453ba22f3f120f777b9ac48f973ee80 ]
Adding a new item to this frequency table I see the existing indentation is
incorrect.
Fixes: 1664014e4679 ("clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220712125922.3461675-2-bryan.odonoghue@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41fff779d7948147f2440c4bb134cdf8b45b22d7 ]
When a GDSC is found to be enabled at boot the pm_runtime state will
be unbalanced as the GDSC is later turned off. Fix this by increasing
the usage counter on the power-domain, in line with how we handled the
regulator state.
Fixes: 1b771839de05 ("clk: qcom: gdsc: enable optional power domain support")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220713212818.130277-1-bjorn.andersson@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0696770cef35a1fd16ea2167e2198c18aa6fbfe ]
Sometimes calculation of d value may result in 0 because of the
rounding after integer division. This causes the following error:
[ 113.969689] camss_gp1_clk_src: rcg didn't update its configuration.
[ 113.969754] WARNING: CPU: 3 PID: 35 at drivers/clk/qcom/clk-rcg2.c:122 update_config+0xc8/0xdc
Make sure that D value is never zero.
Fixes: 7f891faf596e ("clk: qcom: clk-rcg2: Add support for duty-cycle for RCG")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220612145955.385787-3-nikita@trvn.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdafb609c3bb848d710ad9cd4debd2ee9d6a4049 ]
In cases when MND is not enabled (e.g. when only Half Integer Divider is
used), setting D registers makes no effect.
Fail instead of making ineffective write.
Fixes: 7f891faf596e ("clk: qcom: clk-rcg2: Add support for duty-cycle for RCG")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220612145955.385787-2-nikita@trvn.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8acf01a6a4f84baf05181e24bd48def4ba23f5b ]
On SM8250 two found VFE GDSC power domains shall not be operated, if
titan top is turned off, thus the former power domains will be set as
subdomains by a GDSC registration routine.
Fixes: 5d66ca79b58c ("clk: qcom: Add camera clock controller driver for SM8250")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220519214133.1728979-3-vladimir.zapolskiy@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 103dd2338bbff567bce7acd00fc5a09c806b38ec ]
On SDM845 two found VFE GDSC power domains shall not be operated, if
titan top is turned off, thus the former power domains will be set as
subdomains by a GDSC registration routine.
Fixes: 78412c262004 ("clk: qcom: Add camera clock controller driver for SDM845")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220519214133.1728979-2-vladimir.zapolskiy@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bd357e698207e2e65db03007e4be65bf9d6a7b3 ]
Currently, attempting to enable the UBI clocks will cause the stuck at
off warning to be printed and clk_enable will fail.
[ 14.936694] gcc_ubi1_ahb_clk status stuck at 'off'
Downstream 5.4 QCA kernel has fixed this by seting the BRANCH_HALT_DELAY
flag on UBI clocks, so lets do the same.
Fixes: 5736294aef83 ("clk: qcom: ipq8074: add NSS clocks")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-6-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e9e61a2815b5cd34f1b495b2d72e8127ce9b794 ]
NSS port 5 and 6 frequency tables are currently broken and are causing a
wide ranges of issue like 1G not working at all on port 6 or port 5 being
clocked with 312 instead of 125 MHz as UNIPHY1 gets selected.
So, update the frequency tables with the ones from the downstream QCA 5.4
based kernel which has already fixed this.
Fixes: 7117a51ed303 ("clk: qcom: ipq8074: add NSS ethernet port clocks")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-3-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3401ea2856ef84f39b75f0dc5ebcaeda81cb90ec ]
UBI32 Huayra PLL fails to lock in 5 us in some SoC silicon and thus it
will cause the wait_for_pll() to timeout and thus return the error
indicating that the PLL failed to lock.
This is bug in Huayra PLL HW for which SW workaround
is to set bit 26 of TEST_CTL register.
This is ported from the QCA 5.4 based downstream kernel.
Fixes: b8e7e519625f ("clk: qcom: ipq8074: add remaining PLL’s")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-2-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca41ec1b30434636c56c5600b24a8d964d359d9c ]
Like in IPQ6018 the NSS related Alpha PLL-s require initial configuration
to work.
So, obtain the regmap that is required for the Alpha PLL configuration
and thus utilize the qcom_cc_really_probe() as we already have the regmap.
Then utilize the Alpha PLL configs from the downstream QCA 5.4 based
kernel to configure them.
This fixes the UBI32 and NSS crypto PLL-s failing to get enabled by the
kernel.
Fixes: b8e7e519625f ("clk: qcom: ipq8074: add remaining PLL’s")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-1-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd363e2f7196278e7a30f509a0e8a841cb763b14 ]
The msm8939 has an additional higher operating point for the multi-media
peripherals. The higher throughput MM componets operate off of the
system-mm noc not the system noc.
system_mm_noc_bfdcd_clk_src is the source clock for the higher frequency
capable system noc mm.
Maximum frequency for the MM SNOC is 400 MHz.
Fixes: 1664014e4679 ("clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220504163835.40130-4-bryan.odonoghue@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63d42708320d6d2ca9ed505123d50ff4a542c36f ]
Reviewing qcom docs for the 8939 we can see the command rcgr is pointing to
the wrong address. bimc_ddr_clk_src_rcgr is @ 0x01832024 not 0x01832004.
Fixes: 1664014e4679 ("clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220504163835.40130-3-bryan.odonoghue@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df83d2c9e72910416f650ade1e07cc314ff02731 ]
Unlock spinlock after the mux switch is completed to prevent any corner
case of mux request while the switch still needs to be done.
Fixes: 4d7dc77babfe ("clk: qcom: Add support for Krait clocks")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220430054458.31321-3-ansuelsmth@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4f40351901a10cd662ac2c081396d8fb04f584d ]
Access to I/O of SM8250 camera clock controller IP depends on enabled
GCC_CAMERA_AHB_CLK clock supplied by global clock controller, the latter
one is inited on subsys level, so, to satisfy the dependency, it would
make sense to deprive the init level of camcc-sm8250 driver.
If both drivers are compiled as built-in, there is a change that a board
won't boot up due to a race, which happens on the same init level.
Fixes: 5d66ca79b58c ("clk: qcom: Add camera clock controller driver for SM8250")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220518103554.949511-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
framework that simplifies a runtime PM call. Otherwise the majority of the diff
falls to a few SoC drivers: Qualcomm, STM32 and MediaTek. Those SoCs gain some
new hardware support and what comes along with that is quite a few lines of
data and some clk_ops code. Beyond the new hardware support we have the usual
pile of driver updates that add missing clks on already supported SoCs or fix
up problems like bad clk tree descriptions. It's nice to see that more drivers
are moving to clk_hw based APIs too.
New Drivers:
- Add STM32MP13 RCC driver (Reset Clock Controller)
- MediaTek MT8186 SoC clk support
- Airoha EN7523 SoC system clocks
- Clock driver for exynosautov9 SoC
- Renesas R-Car V4H and RZ/V2M SoCs
- Renesas RZ/G2UL SoC
- LPASS clk driver for Qualcomm sc7280 SoC
- GCC clk driver for Qualcomm SC8280XP SoC
Updates:
- SDCC uses floor clk ops on Qualcomm MSM8976
- Add modem reset and fix RPM clks on Qualcomm MSM8976
- Add the two missing CLKOUT clocks for U8500/DB8500 SoC
- Mark some clks critical on Ingenic X1000
- Convert ux500 to clk_hw
- Move MediaTek driver to clk_hw provider APIs
- Use i2c driver probe_new to avoid id scans
- Convert a number of Rockchip dt bindings to YAML
- Mark hclk_vo critical on Rockchip rk3568
- Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
- Various cleanups like memory allocation error checks and plugged leaks
- Allwinner H6 RTC clock support
- Allwinner H616 32 kHz clock support
- Add the Universal Flash Storage clock on Renesas R-Car S4-8
- Add I2C, SSIF-2 (sound), USB, CANFD, OSTM (timer), WDT, SPI Multi
I/O Bus, RSPI, TSU (thermal), and ADC clocks and resets on Renesas RZ/G2UL
- Add display clock support on Renesas RZ/G2L
- Add RPC (QSPI/HyperFlash) clocks on Renesas R-Car E3 and D3
- Add 27 MHz phy PLL ref clock on i.MX
- Add mcore_booted module parameter to tell kernel M core has already booted
for i.MX
- Remove snvs clock on i.MX because it was for secure world only
- Add dt bindings for i.MX8MN GPT
- Add DISP2 pixel clock for i.MX8MP
- Add clkout1/2 for i.MX8MP
- Fix parent clock of ubs_root_clk for i.MX8MP
- Implement better RCG parking on Qualcomm SoCs using the shared RCG clk ops
- Kerneldoc fixes
- Switch Tegra BPMP to determine_rate clk op
- Add a pointer to dt schema for generic clock bindings
-----BEGIN PGP SIGNATURE-----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=7lBA
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Mainly driver updates this time around.
There's a single patch to the core clk framework that simplifies a
runtime PM call. Otherwise the majority of the diff falls to a few SoC
drivers: Qualcomm, STM32 and MediaTek. Those SoCs gain some new
hardware support and what comes along with that is quite a few lines
of data and some clk_ops code.
Beyond the new hardware support we have the usual pile of driver
updates that add missing clks on already supported SoCs or fix up
problems like bad clk tree descriptions. It's nice to see that more
drivers are moving to clk_hw based APIs too.
New Drivers:
- Add STM32MP13 RCC driver (Reset Clock Controller)
- MediaTek MT8186 SoC clk support
- Airoha EN7523 SoC system clocks
- Clock driver for exynosautov9 SoC
- Renesas R-Car V4H and RZ/V2M SoCs
- Renesas RZ/G2UL SoC
- LPASS clk driver for Qualcomm sc7280 SoC
- GCC clk driver for Qualcomm SC8280XP SoC
Updates:
- SDCC uses floor clk ops on Qualcomm MSM8976
- Add modem reset and fix RPM clks on Qualcomm MSM8976
- Add the two missing CLKOUT clocks for U8500/DB8500 SoC
- Mark some clks critical on Ingenic X1000
- Convert ux500 to clk_hw
- Move MediaTek driver to clk_hw provider APIs
- Use i2c driver probe_new to avoid id scans
- Convert a number of Rockchip dt bindings to YAML
- Mark hclk_vo critical on Rockchip rk3568
- Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
- Various cleanups like memory allocation error checks and plugged
leaks
- Allwinner H6 RTC clock support
- Allwinner H616 32 kHz clock support
- Add the Universal Flash Storage clock on Renesas R-Car S4-8
- Add I2C, SSIF-2 (sound), USB, CANFD, OSTM (timer), WDT, SPI Multi
I/O Bus, RSPI, TSU (thermal), and ADC clocks and resets on Renesas
RZ/G2UL
- Add display clock support on Renesas RZ/G2L
- Add RPC (QSPI/HyperFlash) clocks on Renesas R-Car E3 and D3
- Add 27 MHz phy PLL ref clock on i.MX
- Add mcore_booted module parameter to tell kernel M core has already
booted for i.MX
- Remove snvs clock on i.MX because it was for secure world only
- Add dt bindings for i.MX8MN GPT
- Add DISP2 pixel clock for i.MX8MP
- Add clkout1/2 for i.MX8MP
- Fix parent clock of ubs_root_clk for i.MX8MP
- Implement better RCG parking on Qualcomm SoCs using the shared RCG
clk ops
- Kerneldoc fixes
- Switch Tegra BPMP to determine_rate clk op
- Add a pointer to dt schema for generic clock bindings"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (168 commits)
Revert "clk: qcom: regmap-mux: add pipe clk implementation"
Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc()
clk: stm32mp13: add safe mux management
clk: stm32mp13: add multi mux function
clk: stm32mp13: add all STM32MP13 kernel clocks
clk: stm32mp13: add all STM32MP13 peripheral clocks
clk: stm32mp13: manage secured clocks
clk: stm32mp13: add composite clock
clk: stm32mp13: add stm32 divider clock
clk: stm32mp13: add stm32_gate management
clk: stm32mp13: add stm32_mux clock management
clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller)
dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC
clk: ti: clkctrl: replace usage of found with dedicated list iterator variable
clk: ti: composite: Prefer kcalloc over open coded arithmetic
dt-bindings: clock: exynosautov9: correct count of NR_CLK
clk: mediatek: mt8173: Switch to clk_hw provider APIs
clk: mediatek: Switch to clk_hw provider APIs
...
Johan Hovold has pointed out that there are several deficiencies and a
race condition in the regmap_mux_safe ops that were merged. Pipe clocks
has been updated to use newer and simpler clk_regmap_phy_mux_ops. Drop
the regmap-mux-safe clock ops now.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521005343.1429642-4-dmitry.baryshkov@linaro.org
Johan Hovold has pointed out that there are several deficiencies and a
race condition in the regmap_mux_safe ops that were merged. Revert the
commit that switches gcc-sc7280 driver to use regmap_mux_safe.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521005343.1429642-3-dmitry.baryshkov@linaro.org
Johan Hovold has pointed out that there are several deficiencies and a
race condition in the regmap_mux_safe ops that were merged. Revert the
commit that switches gcc-sm8450 driver to use regmap_mux_safe.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521005343.1429642-2-dmitry.baryshkov@linaro.org
As GDSCs are turned on and off some associated clocks are momentarily
enabled for house keeping purposes. For this, and similar, purposes the
"shared RCGs" will park the RCG on a source clock which is known to be
available.
When the RCG is parked, a safe clock source will be selected and
committed, then the original source would be written back and upon enable
the change back to the unparked source would be committed.
But starting with SM8350 this fails, as the value in CFG is committed by
the GDSC handshake and without a ticking parent the GDSC enablement will
time out.
This becomes a concrete problem if the runtime supended state of a
device includes disabling such rcg's parent clock. As the device
attempts to power up the domain again the rcg will fail to enable and
hence the GDSC enablement will fail, preventing the device from
returning from the suspended state.
This can be seen in e.g. the display stack during probe on SM8350.
To avoid this problem, the software needs to ensure that the RCG is
configured to a active parent clock while it is disabled. This is done
by caching the CFG register content while the shared RCG is parked on
this safe source.
Writes to M, N and D registers are committed as they are requested. New
helpers for get_parent() and recalc_rate() are extracted from their
previous implementations and __clk_rcg2_configure() is modified to allow
it to operate on the cached value.
Fixes: 7ef6f11887bd ("clk: qcom: Configure the RCGs to a safe source as needed")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220426212136.1543984-1-bjorn.andersson@linaro.org
Add support for the Global Clock Controller found in the Qualcomm
SC8280XP platform.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220505025457.1693716-3-bjorn.andersson@linaro.org
Just like in case of other SoCs change SDCC1/SDCC2 ops
to floor to avoid overclocking controller.
This commit only sets SDCC1/SDCC2 which are used for EMMC/SDCARD.
Leave SDCC3 because on this platform it's mostly used for WIFI/BT chips,
like on Sony Loire familly devices.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220426073048.11509-2-a39.skl@gmail.com
MSM8976 does not have rpm clock named mmssnoc,
instead it's called sysmmnoc, drop define and reuse.
While we are at it add XO clock to list.
Fixes: 7d61e773c3ed ("clk: qcom: smd: Add support for MSM8976 rpm clocks")
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220426090226.27293-1-a39.skl@gmail.com
Since the commit 948fb0969eae ("clk: Always clamp the rounded rate"),
the clk_core_determine_round_nolock() would clamp the requested rate
between min and max rates from the rate request. Normally these fields
would be filled by clk_core_get_boundaries() called from
clk_round_rate().
However clk_gfx3d_determine_rate() uses a manually crafted rate request,
which did not have these fields filled. Thus the requested frequency
would be clamped to 0, resulting in weird frequencies being requested
from the hardware.
Fix this by filling min_rate and max_rate to the values valid for the
respective PLLs (0 and ULONG_MAX).
Fixes: 948fb0969eae ("clk: Always clamp the rounded rate")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220419235447.1586192-1-dmitry.baryshkov@linaro.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reported-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add four clocks which need to be manipulated in order to initialize the AHB
bus which exposes the SCC block in the global address space.
If a device is known to be configured such that writing to these
registers from Linux is not permitted, the 'protected-clocks'
device tree property must be used to denote that fact.
Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220411072156.24451-3-michael.srba@seznam.cz
The Low Power Audio subsystem core and audio clocks are required for
Audio client to be able to request for the clocks and power domains.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220223172248.18877-2-tdas@codeaurora.org
Use newly defined clk_regmap_mux_safe_ops for PCIe pipe clocks to let
the clock framework automatically park the clock when the clock is
switched off and restore the parent when the clock is switched on.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220323085010.1753493-4-dmitry.baryshkov@linaro.org
Use newly defined clk_regmap_mux_safe_ops for PCIe pipe clocks to let
the clock framework automatically park the clock when the clock is
switched off and restore the parent when the clock is switched on.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220323085010.1753493-3-dmitry.baryshkov@linaro.org
On recent Qualcomm platforms the QMP PIPE clocks feed into a set of
muxes which must be parked to the "safe" source (bi_tcxo) when
corresponding GDSC is turned off and on again. Currently this is
handcoded in the PCIe driver by reparenting the gcc_pipe_N_clk_src
clock. However the same code sequence should be applied in the
pcie-qcom endpoint, USB3 and UFS drivers.
Rather than copying this sequence over and over again, follow the
example of clk_rcg2_shared_ops and implement this parking in the
enable() and disable() clock operations. As we are changing the parent
behind the back of the clock framework, also implement custom
set_parent() and get_parent() operations behaving accroding to the clock
framework expectations (cache the new parent if the clock is in disabled
state, return cached parent).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220323085010.1753493-2-dmitry.baryshkov@linaro.org
clk_set_rate_range() works so that the frequency is re-evaulated each time the
rate is changed. Previously we wouldn't let clk providers see a rate that was
different if it was still within the range, which could be bad for power if the
clk could run slower when a range expands. Now the clk provider can decide to
do something differently when the constraints change. This broke Nvidia's clk
driver so we had to wait for the fix for that to bake a little more in -next.
The rate range patch series also introduced a kunit suite for the clk framework
that we're going to extend in the next release. It already made it easy to find
corner cases in the rate range patches so I'm excited to see it cover more clk
code and increase our confidence in core framework patches in the future. I
also added a kunit test for the basic clk gate code and that work will continue
to cover more basic clk types: muxes, dividers, etc.
Beyond the core code we have the usual set of clk driver updates and additions.
Qualcomm again dominates the diffstat here with lots more SoCs being supported
and i.MX follows afer that with a similar number of SoCs gaining clk drivers.
Beyond those large additions there's drivers being modernized to use
clk_parent_data so we can move away from global string names for all the clks
in an SoC. Finally there's lots of little fixes all over the clk drivers for
typos, warnings, and missing clks that aren't critical and get batched up
waiting for the next merge window to open. Nothing super big stands out in the
driver pile. Full details are below.
Core:
- Make clk_set_rate_range() re-evaluate the limits each time
- Introduce various clk_set_rate_range() tests
- Add clk_drop_range() to drop a previously set range
New Drivers:
- i.MXRT1050 clock driver and bindings
- i.MX8DXL clock driver and bindings
- i.MX93 clock driver and bindings
- NCO blocks on Apple SoCs
- Audio clks on StarFive JH7100 RISC-V SoC
- Add support for the new Renesas RZ/V2L SoC
- Qualcomm SDX65 A7 PLL
- Qualcomm SM6350 GPU clks
- Qualcomm SM6125, SM6350, QCS2290 display clks
- Qualcomm MSM8226 multimedia clks
Updates:
- Kunit tests for clk-gate implementation
- Terminate arrays with sentinels and make that clearer
- Cleanup SPDX tags
- Fix typos in comments
- Mark mux table as const in clk-mux
- Make the all_lists array const
- Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add
support for dynamic mode
- Clock configuration on Microchip PolarFire SoCs
- Free allocations on probe error in Mediatek clk driver
- Modernize Mediatek clk driver by consolidating code
- Add watchdog (WDT), I2C, and pin function controller (PFC) clocks on
Renesas R-Car S4-8
- Improve the clocks for the Rockchip rk3568 display outputs (parenting, pll-rates)
- Use of_device_get_match_data() instead of open-coding on Rockchip rk3568
- Reintroduce the expected fractional-divider behaviour that disappeared
with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS
- Remove SYS PLL 1/2 clock gates for i.MX8M*
- Remove AUDIO MCLK ROOT from i.MX7D
- Add fracn gppll clock type used by i.MX93
- Add new composite clock for i.MX93
- Add missing media mipi phy ref clock for i.MX8MP
- Fix off by one in imx_lpcg_parse_clks_from_dt()
- Rework for the imx pll14xx
- sama7g5: One low priority fix for GCLK of PDMC
- Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8
- Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3
- Add CAN-FD clocks on Renesas R-Car V3U
- Qualcomm SC8280XP RPMCC
- Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs
- Rework Qualcomm GCC bindings and convert SDM845 camera bindig to YAML
- Convert various Qualcomm drivers to use clk_parent_data
- Remove test clocks from various Qualcomm drivers
- Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS
- Qualcomm SM8150 EMAC, PCIe, UFS GDSCs
- Better pixel clk frequency support on Qualcomm RCG2 clks
-----BEGIN PGP SIGNATURE-----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=fP8L
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"There's one large change in the core clk framework here. We change how
clk_set_rate_range() works so that the frequency is re-evaulated each
time the rate is changed. Previously we wouldn't let clk providers see
a rate that was different if it was still within the range, which
could be bad for power if the clk could run slower when a range
expands. Now the clk provider can decide to do something differently
when the constraints change. This broke Nvidia's clk driver so we had
to wait for the fix for that to bake a little more in -next.
The rate range patch series also introduced a kunit suite for the clk
framework that we're going to extend in the next release. It already
made it easy to find corner cases in the rate range patches so I'm
excited to see it cover more clk code and increase our confidence in
core framework patches in the future. I also added a kunit test for
the basic clk gate code and that work will continue to cover more
basic clk types: muxes, dividers, etc.
Beyond the core code we have the usual set of clk driver updates and
additions. Qualcomm again dominates the diffstat here with lots more
SoCs being supported and i.MX follows afer that with a similar number
of SoCs gaining clk drivers. Beyond those large additions there's
drivers being modernized to use clk_parent_data so we can move away
from global string names for all the clks in an SoC. Finally there's
lots of little fixes all over the clk drivers for typos, warnings, and
missing clks that aren't critical and get batched up waiting for the
next merge window to open. Nothing super big stands out in the driver
pile. Full details are below.
Core:
- Make clk_set_rate_range() re-evaluate the limits each time
- Introduce various clk_set_rate_range() tests
- Add clk_drop_range() to drop a previously set range
New Drivers:
- i.MXRT1050 clock driver and bindings
- i.MX8DXL clock driver and bindings
- i.MX93 clock driver and bindings
- NCO blocks on Apple SoCs
- Audio clks on StarFive JH7100 RISC-V SoC
- Add support for the new Renesas RZ/V2L SoC
- Qualcomm SDX65 A7 PLL
- Qualcomm SM6350 GPU clks
- Qualcomm SM6125, SM6350, QCS2290 display clks
- Qualcomm MSM8226 multimedia clks
Updates:
- Kunit tests for clk-gate implementation
- Terminate arrays with sentinels and make that clearer
- Cleanup SPDX tags
- Fix typos in comments
- Mark mux table as const in clk-mux
- Make the all_lists array const
- Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding
and add support for dynamic mode
- Clock configuration on Microchip PolarFire SoCs
- Free allocations on probe error in Mediatek clk driver
- Modernize Mediatek clk driver by consolidating code
- Add watchdog (WDT), I2C, and pin function controller (PFC) clocks
on Renesas R-Car S4-8
- Improve the clocks for the Rockchip rk3568 display outputs
(parenting, pll-rates)
- Use of_device_get_match_data() instead of open-coding on Rockchip
rk3568
- Reintroduce the expected fractional-divider behaviour that
disappeared with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS
- Remove SYS PLL 1/2 clock gates for i.MX8M*
- Remove AUDIO MCLK ROOT from i.MX7D
- Add fracn gppll clock type used by i.MX93
- Add new composite clock for i.MX93
- Add missing media mipi phy ref clock for i.MX8MP
- Fix off by one in imx_lpcg_parse_clks_from_dt()
- Rework for the imx pll14xx
- sama7g5: One low priority fix for GCLK of PDMC
- Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8
- Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3
- Add CAN-FD clocks on Renesas R-Car V3U
- Qualcomm SC8280XP RPMCC
- Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs
- Rework Qualcomm GCC bindings and convert SDM845 camera bindig to
YAML
- Convert various Qualcomm drivers to use clk_parent_data
- Remove test clocks from various Qualcomm drivers
- Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS
- Qualcomm SM8150 EMAC, PCIe, UFS GDSCs
- Better pixel clk frequency support on Qualcomm RCG2 clks"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits)
clk: zynq: Update the parameters to zynq_clk_register_periph_clk
clk: zynq: trivial warning fix
clk: Drop the rate range on clk_put()
clk: test: Test clk_set_rate_range on orphan mux
clk: Initialize orphan req_rate
dt-bindings: clock: drop useless consumer example
dt-bindings: clock: renesas: Make example 'clocks' parsable
clk: qcom: gcc-msm8994: Fix gpll4 width
dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml
clk: rs9: Add Renesas 9-series PCIe clock generator driver
clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index()
clk: visconti: prevent array overflow in visconti_clk_register_gates()
dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator
clk: sifive: Move all stuff into SoCs header files from C files
clk: sifive: Add SoCs prefix in each SoCs-dependent data
riscv: dts: Change the macro name of prci in each device node
dt-bindings: change the macro name of prci in header files and example
clk: sifive: duplicate the macro definitions for the time being
clk: qcom: sm6125-gcc: fix typos in comments
clk: ti: clkctrl: fix typos in comments
...
- Make clk_set_rate_range() re-evaluate the limits each time
- Introduce various clk_set_rate_range() tests
- Add clk_drop_range() to drop a previously set range
- Support for NCO blocks on Apple SoCs
* clk-range:
clk: Drop the rate range on clk_put()
clk: test: Test clk_set_rate_range on orphan mux
clk: Initialize orphan req_rate
clk: bcm: rpi: Run some clocks at the minimum rate allowed
clk: bcm: rpi: Set a default minimum rate
clk: bcm: rpi: Add variant structure
clk: Add clk_drop_range
clk: Always set the rate on clk_set_range_rate
clk: Use clamp instead of open-coding our own
clk: Always clamp the rounded rate
clk: Enforce that disjoints limits are invalid
clk: Introduce Kunit Tests for the framework
clk: Fix clk_hw_get_clk() when dev is NULL
* clk-uniphier:
clk: uniphier: Fix fixed-rate initialization
* clk-apple:
clk: clk-apple-nco: Allow and fix module building
MAINTAINERS: Add clk-apple-nco under ARM/APPLE MACHINE
clk: clk-apple-nco: Add driver for Apple NCO
dt-bindings: clock: Add Apple NCO
* clk-qcom: (61 commits)
clk: qcom: gcc-msm8994: Fix gpll4 width
dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml
clk: qcom: Add display clock controller driver for SM6125
dt-bindings: clock: add QCOM SM6125 display clock bindings
clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and Kconfig
clk: qcom: gcc: Add emac GDSC support for SM8150
clk: qcom: gcc: sm8150: Fix some identation issues
clk: qcom: gcc: Add UFS_CARD and UFS_PHY GDSCs for SM8150
clk: qcom: gcc: Add PCIe0 and PCIe1 GDSC for SM8150
clk: qcom: clk-rcg2: Update the frac table for pixel clock
clk: qcom: clk-rcg2: Update logic to calculate D value for RCG
clk: qcom: smd: Add missing MSM8998 RPM clocks
clk: qcom: smd: Add missing RPM clocks for msm8992/4
dt-bindings: clock: qcom: rpmcc: Add RPM Modem SubSystem (MSS) clocks
clk: qcom: gcc-ipq806x: add CryptoEngine resets
dt-bindings: reset: add ipq8064 ce5 resets
clk: qcom: gcc-ipq806x: add CryptoEngine clocks
dt-bindings: clock: add ipq8064 ce5 clk define
clk: qcom: gcc-ipq806x: add additional freq for sdc table
clk: qcom: clk-rcg: add clk_rcg_floor_ops ops
...
The gpll4 postdiv is actually a div4, so make sure that Linux is aware of
this.
This fixes the following error messages:
mmc1: Card appears overclocked; req 200000000 Hz, actual 343999999 Hz
mmc1: Card appears overclocked; req 400000000 Hz, actual 687999999 Hz
Fixes: aec89f78cf01 ("clk: qcom: Add support for msm8994 global clock controller")
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20220319174940.341137-1-konrad.dybcio@somainline.org
Tested-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the display clock controller found on SM6125
based devices. This allows display drivers to probe and
control their clocks.
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220303131812.302302-4-marijn.suijten@somainline.org
In order to keep at least the list of `CONFIG_SM_` drivers sorted
alphabetically, SDX_GCC_65 should have been moved one line up. This in
turn makes it easier and cleaner to add the followup SM_DISPCC_6125
driver in the right place, right before SM_DISPCC_8250.
Fixes: d79afa201328 ("clk: qcom: Add SDX65 GCC support")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220303131812.302302-2-marijn.suijten@somainline.org
Support the new numerator and denominator for pixel clock on SM8350 and
support rgb101010, RGB888 use cases on SM8450.
Fixes: 99cbd064b059f ("clk: qcom: Support display RCG clocks")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220227175536.3131-2-tdas@codeaurora.org
The display pixel clock has a requirement on certain newer platforms to
support M/N as (2/3) and the final D value calculated results in
underflow errors.
As the current implementation does not check for D value is within
the accepted range for a given M & N value. Update the logic to
calculate the final D value based on the range.
Fixes: 99cbd064b059f ("clk: qcom: Support display RCG clocks")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220227175536.3131-1-tdas@codeaurora.org
Add missing RPM-provided clocks on msm8998 and reorder the definitions
where needed.
Tested-by: Jami Kettunen <jami.kettunen@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Tested-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226214126.21209-3-konrad.dybcio@somainline.org
XO and MSS_CFG were omitted when first adding the clocks for these SoCs.
Add them, and while at it, move the XO clock to the top of the definition
list, as ideally everyone should start using it sooner or later..
Fixes: b4297844995f ("clk: qcom: smd: Add support for MSM8992/4 rpm clocks")
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226214126.21209-2-konrad.dybcio@somainline.org
