Stefan Agner 0500953b49 ARM: dts: vf610-colibri: Add USB support
Add USB support for Colibri VF61 modules. The Colibri standard pinout
defines a pin for USB over-current. However, due to lack of pinmux
options, the USB hosts over-current protection signal of the Colibri
standard could not be connected to the PHY's over-current protection.
Hence we need to disable the over-current functionality of the USB
controller.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16 10:25:54 +08:00
..
2014-07-15 05:08:56 -07:00
2014-01-17 12:36:41 -08:00
2014-05-19 21:55:03 -07:00
2014-06-25 20:26:30 +02:00
2014-07-28 17:04:15 +02:00
2014-07-28 17:04:15 +02:00
2013-09-06 13:26:27 -07:00
2013-11-18 14:50:17 -08:00
2014-03-29 02:03:39 +01:00
2014-08-08 11:14:29 -07:00
2014-09-16 10:25:51 +08:00
2014-07-18 16:49:35 +08:00
2014-05-19 21:55:03 -07:00
2014-05-19 21:55:03 -07:00
2014-05-19 21:55:03 -07:00
2014-07-15 05:08:56 -07:00
2014-04-18 16:40:08 -07:00
2014-05-21 14:20:27 +02:00
2014-08-08 11:00:26 -07:00
2014-08-08 11:00:26 -07:00
2014-08-08 11:00:26 -07:00
2014-05-06 10:19:49 -07:00
2014-04-23 15:24:06 -04:00
2014-04-23 15:24:06 -04:00
2014-04-23 15:24:06 -04:00
2014-07-29 07:31:40 +02:00
2014-07-29 07:31:40 +02:00
2014-01-31 14:58:56 -08:00