Tony Lindgren 08f9268b2a ARM: dts: ARM: dts: Fix omap5 SDIO dat1 interrupt
Few changes to fix issues I've noticed while debugging omap5-uevm
wl18xx issues:

1. Move wlcore irq pin muxing under wlcore. This irq could be
   different from gpio_wk14 on some board variants

2. Don't configure pull on wlcore irq pin. There is a 10k
   pull up resistor R105 on the device to VDDS_1v8_MAIN

3. The padconf register for wlsdio_data1 is wrong, it's really
   at 0x1a8 + 2 - 0x40 = 0x16a offset, not at 0x168 as that's
   for wlsdio_data0

4. Mark the omap5-uevm wlan as compatible with ti,wl1837 as
   that's what the TDK R078 part seems to be

5. The MMC interrupt for WLAN musb be wakeupgen, not gic

Looks like omap5-uevm WLAN behaves better now, but I still seem
to have issues with some access points.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-13 14:56:30 -07:00
..
2016-03-20 15:15:48 -07:00
2016-03-20 15:15:48 -07:00
2016-03-20 15:15:48 -07:00
2016-03-20 15:15:48 -07:00
2016-08-01 18:37:45 -04:00
2016-01-20 18:16:29 -08:00
2015-12-15 17:46:16 +01:00
2016-08-01 18:37:45 -04:00
2016-06-06 16:24:27 +08:00
2016-04-15 22:35:45 +08:00
2016-08-01 18:37:45 -04:00
2016-08-01 18:37:45 -04:00
2016-04-26 12:50:45 +02:00
2016-08-01 18:37:45 -04:00
2016-08-01 18:37:45 -04:00
2016-06-29 14:28:27 +02:00
2016-06-29 14:28:42 +02:00
2016-06-24 11:04:35 +09:00
2016-08-01 18:37:45 -04:00
2016-08-01 18:37:45 -04:00
2016-08-01 18:37:45 -04:00
2015-10-06 16:25:00 +02:00
2015-10-06 16:25:00 +02:00
2016-07-04 21:18:11 +02:00
2016-08-01 18:37:45 -04:00
2016-08-01 18:37:45 -04:00
2016-04-26 10:24:58 -07:00
2016-05-24 15:46:06 -07:00