iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
0b9a29add4
linux/arch/arm/mach-omap2
History
Paul E. McKenney 0b9a29add4 arm: Use _rcuidle tracepoint to allow use from idle 
Testing on ARM encountered the following pair of lockdep-RCU splats:

------------------------------------------------------------------------

===============================
[ INFO: suspicious RCU usage. ]
4.6.0-rc4-next-20160422 #1 Not tainted
-------------------------------
include/trace/events/power.h:328 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

RCU used illegally from idle CPU!
rcu_scheduler_active = 1, debug_locks = 0
RCU used illegally from extended quiescent state!
no locks held by swapper/0/0.

stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc4-next-20160422 #1
Hardware name: Generic OMAP3-GP (Flattened Device Tree)
[<c010f55c>] (unwind_backtrace) from [<c010b64c>] (show_stack+0x10/0x14)
[<c010b64c>] (show_stack) from [<c047acbc>] (dump_stack+0xa8/0xe0)
[<c047acbc>] (dump_stack) from [<c012bc10>] (pwrdm_set_next_pwrst+0xf8/0x1cc)
[<c012bc10>] (pwrdm_set_next_pwrst) from [<c01269fc>] (omap3_enter_idle_bm+0x1b8/0x1e8)
[<c01269fc>] (omap3_enter_idle_bm) from [<c05fa0b8>] (cpuidle_enter_state+0x84/0x408)
[<c05fa0b8>] (cpuidle_enter_state) from [<c0182c1c>] (cpu_startup_entry+0x1c8/0x3f0)
[<c0182c1c>] (cpu_startup_entry) from [<c0b00c20>] (start_kernel+0x354/0x3cc)

------------------------------------------------------------------------

[<c010f55c>] (unwind_backtrace) from [<c010b64c>] (show_stack+0x10/0x14)
[<c010b64c>] (show_stack) from [<c047ac3c>] (dump_stack+0xa8/0xe0)
[<c047ac3c>] (dump_stack) from [<c012c340>] (_pwrdm_state_switch+0x188/0x32c)
[<c012c340>] (_pwrdm_state_switch) from [<c012c4f0>] (_pwrdm_post_transition_cb+0xc/0x14)
[<c012c4f0>] (_pwrdm_post_transition_cb) from [<c012ba74>] (pwrdm_for_each+0x30/0x5c)
[<c012ba74>] (pwrdm_for_each) from [<c012c72c>] (pwrdm_post_transition+0x24/0x30)
[<c012c72c>] (pwrdm_post_transition) from [<c012548c>] (omap_sram_idle+0xfc/0x240)
[<c012548c>] (omap_sram_idle) from [<c0126934>] (omap3_enter_idle_bm+0xf0/0x1e8)
[<c0126934>] (omap3_enter_idle_bm) from [<c05fa038>] (cpuidle_enter_state+0x84/0x408)
[<c05fa038>] (cpuidle_enter_state) from [<c0182b90>] (cpu_startup_entry+0x1c8/0x3f0)
[<c0182b90>] (cpu_startup_entry) from [<c0b00c20>] (start_kernel+0x354/0x3cc)

------------------------------------------------------------------------

These are caused by event tracing from the idle loop, and they were
exposed by commit 293e2421fe ("rcu: Remove superfluous versions of
rcu_read_lock_sched_held()"), which suppressed some false negatives.
The current commit therefore adds the _rcuidle suffix to make RCU aware
of this implicit use of RCU by event tracing, thus preventing both splats.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: <linux-omap@vger.kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>
2016-04-29 13:29:02 -07:00
..
include/mach ARM: omap2: restore OMAP4 barrier behaviour 2015-07-25 15:28:16 +01:00
am33xx-restart.c ARM: OMAP2+: PRM: provide generic API for system reset 2014-10-27 08:39:26 -07:00
am33xx.h
board-flash.c ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
board-flash.h ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
board-generic.c ARM: OMAP2+: Set system_rev from ATAGS for n900 2016-02-10 16:17:15 -08:00
board-ldp.c arm: omap2: timer: rename omap_sync32k_timer_init() 2015-10-16 11:06:23 -05:00
board-n8x0.c ARM: SoC/OMAP GPMC driver cleanup and move for 3.19 2014-12-09 16:57:56 -08:00
board-rx51-peripherals.c ARM: SoC platform updates for v4.5 2016-01-20 18:10:05 -08:00
board-rx51-video.c ARM: OMAP2+: N900: remove omapdss init for DT boot 2014-04-18 16:37:43 -07:00
board-rx51.c arm: omap2: timer: rename omap_sync32k_timer_init() 2015-10-16 11:06:23 -05:00
board-rx51.h
clkt2xxx_dpll.c
clkt2xxx_dpllcore.c ARM: OMAP2+: raw read and write endian fix 2014-05-08 07:09:53 -07:00
clkt2xxx_virt_prcm_set.c ARM: omap2: use clkdev_create() 2015-05-06 11:58:58 +01:00
clock2xxx.h ARM: OMAP2: clock: remove unused apll code 2015-01-07 10:54:40 -08:00
clock3xxx.h CLK: TI: add omap3 clock init file 2014-01-17 12:35:48 -08:00
clock.c clk: ti: omap5+: dpll: implement errata i810 2015-11-30 11:34:17 -08:00
clock.h clk: ti: move low-level access and init code under clock driver 2015-06-02 12:31:46 +03:00
clockdomain.c
clockdomain.h ARM: OMAP2+: Add minimal clockdomains for dm814x 2015-07-16 02:09:33 -07:00
clockdomains2xxx_3xxx_data.c
clockdomains3xxx_data.c ARM: OMAP3: fix iva mmu programming issues 2014-03-12 09:48:26 -07:00
clockdomains7xx_data.c ARM: OMAP2+: DRA7: clockdomain: change l4per2_7xx_clkdm to SW_WKUP 2015-07-15 13:57:28 -06:00
clockdomains33xx_data.c
clockdomains43xx_data.c ARM: OMAP2+: CM: AM43x clockdomain data 2013-10-13 22:48:36 -06:00
clockdomains44xx_data.c
clockdomains54xx_data.c
clockdomains81xx_data.c ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx 2015-12-22 16:23:08 -08:00
clockdomains2420_data.c
clockdomains2430_data.c
cm1_7xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm1_44xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm1_54xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2_7xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2_44xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2_54xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2xxx_3xxx.h ARM: OMAP2+: raw read and write endian fix 2014-05-08 07:09:53 -07:00
cm2xxx.c ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm2xxx.h ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm3xxx.c ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm3xxx.h ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm33xx.c ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm33xx.h ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm44xx.h ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm81xx.h ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx 2015-12-22 16:23:08 -08:00
cm_common.c ARM: OMAP2+: clock: add low-level support for regmap 2015-03-31 21:26:55 +03:00
cm-regbits-7xx.h
cm-regbits-24xx.h ARM: OMAP2: convert sys_ck and osc_ck to standard clock types 2014-07-02 14:26:06 +03:00
cm-regbits-33xx.h
cm-regbits-34xx.h ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver 2014-07-06 15:51:23 -06:00
cm-regbits-44xx.h
cm-regbits-54xx.h
cm.h ARM: OMAP2+: CM: determine CM base address from device tree 2015-03-27 10:55:57 +02:00
cminst44xx.c ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
common-board-devices.c
common-board-devices.h arm: omap2: n8x0: move i2c devices to DT 2014-09-16 14:43:11 -07:00
common.c Revert "ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688" 2015-07-25 15:28:14 +01:00
common.h ARM: use const and __initconst for smp_operations 2015-12-01 22:17:45 +01:00
control.c ARM: OMAP2+: Fix out of range register access with syscon_config.max_register 2016-02-22 09:22:38 -08:00
control.h ARM: OMAP3: Add support for configuring MMC pins as GPIO pins 2015-05-20 09:23:43 -07:00
cpuidle34xx.c ARM: OMAP3: Add cpuidle parameters table for omap3430 2016-02-19 10:35:39 -08:00
cpuidle44xx.c Power management and ACPI updates for v4.1-rc1 2015-04-14 20:21:54 -07:00
ctrl_module_wkup_44xx.h
devices.c Merge branch 'enable-devices' into omap-for-v4.5/fixes 2016-01-25 10:46:21 -08:00
display.c ARM: OMAP2+: display: detect DRA7 DSS 2015-06-04 09:02:14 +03:00
display.h ARM: OMAP2+: add omapdss_init_of() 2014-03-19 10:52:23 +02:00
dma.c ARM: OMAP2+: DMA: Provide dma_slave_map to omap-dma for legacy boot 2016-02-22 10:00:50 -08:00
drm.c ARM: OMAP2+: display: Create omapdrm device inside omap_display_init 2013-10-08 14:02:35 -07:00
dss-common.c ARM: OMAP2+: remove pdata quirks for displays 2014-04-04 09:55:18 +03:00
dss-common.h ARM: OMAP2+: pdata-quirks: add legacy display init for IGEPv2 board 2013-10-09 07:54:34 -07:00
fb.c ARM: OMAP2+: Remove calls to deprecacted marco,PTR_RET in the files,fb.c and pmu.c 2015-05-20 10:43:37 -07:00
gpio.c
gpmc-nand.c ARM OMAP2+ GPMC: calculate GPMCFCLKDIVIDER based on WAITMONITORINGTIME 2015-03-06 12:39:48 +02:00
gpmc-onenand.c ARM: OMAP2+: Fix onenand initialization to avoid filesystem corruption 2016-02-22 09:24:10 -08:00
gpmc-smsc911x.c ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init() 2013-11-14 10:40:36 -08:00
gpmc-smsc911x.h
gpmc.h ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
hdq1w.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
hdq1w.h
hsmmc.c ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
hsmmc.h mmc: omap_hsmmc: remove unused slot_id parameter 2014-11-26 14:30:56 +01:00
i2c.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
i2c.h
id.c ARM: OMAP2+: Fix SoC detection for dra62x j5-eco 2015-12-22 15:39:29 -08:00
id.h
io.c ARM: OMAP2+: Remove useless check for legacy booting for dm814x 2015-12-09 16:53:46 -08:00
iomap.h ARM: DRA7: Provide proper IO map table 2015-07-16 00:06:05 -07:00
Kconfig ARM: OMAP2+: AM43xx: select ARM TWD timer 2015-12-17 10:54:13 -08:00
l3_2xxx.h
l3_3xxx.h
l4_2xxx.h
l4_3xxx.h
Makefile ARM: OMAP2+: Remove legacy device instantiation of IOMMUs 2015-11-30 10:35:07 -08:00
mcbsp.c ARM: OMAP3: McBSP: do not access CM register directly 2013-10-19 10:11:51 -06:00
mmc.h ARM: OMAP2: MMC: include mmc-omap platform header directly 2014-11-26 14:30:53 +01:00
msdi.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
mux34xx.c
mux34xx.h
mux.c ARM: OMAP2+: remove superfluous NULL pointer check 2015-03-26 10:33:25 -07:00
mux.h ARM: OMAP2+: remove OMAP_PACKAGE_ZAC and OMAP_PACKAGE_ZAF 2014-02-28 15:36:34 -08:00
omap2-restart.c ARM: OMAP2+: Change core_initcall levels to postcore_initcall 2015-12-03 11:38:09 -08:00
omap3-restart.c ARM: OMAP2+: sparse: add missing function declarations 2015-07-15 23:43:41 -06:00
omap4-common.c ARM: omap2: restore OMAP4 barrier behaviour 2015-07-25 15:28:16 +01:00
omap4-restart.c ARM: OMAP2+: sparse: add missing function declarations 2015-07-15 23:43:41 -06:00
omap4-sar-layout.h
omap24xx.h
omap34xx.h [media] omap3isp: Replace many MMIO regions by two 2015-04-02 16:45:07 -03:00
omap44xx.h
omap54xx.h ARM: DRA7: Provide proper IO map table 2015-07-16 00:06:05 -07:00
omap_device.c ARM: OMAP2+: Fix omap_device for module reload on PM runtime forbid 2016-02-12 08:56:52 -08:00
omap_device.h ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected 2013-12-10 09:39:52 -08:00
omap_hwmod_2xxx_3xxx_interconnect_data.c ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs 2014-07-15 05:08:56 -07:00
omap_hwmod_2xxx_3xxx_ipblock_data.c ARM: AM43xx: hwmod: add DSS hwmod data 2014-07-05 17:44:57 -06:00
omap_hwmod_2xxx_interconnect_data.c ARM: OMAP2+: Remove legacy hwmod entries for omap2 2013-11-25 15:31:18 -08:00
omap_hwmod_2xxx_ipblock_data.c ARM: OMAP2+: sparse: add missing static declaration 2015-07-15 23:42:12 -06:00
omap_hwmod_3xxx_data.c ARM: OMAP2+: hwmod data: Add SSI data for omap36xx 2016-02-02 10:06:13 -07:00
omap_hwmod_7xx_data.c ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1 2016-03-01 01:55:59 -07:00
omap_hwmod_33xx_43xx_common_data.h ARM: OMAP: AM43xx hwmod: Add data for am43xx emif hwmod 2015-06-01 19:22:11 -06:00
omap_hwmod_33xx_43xx_interconnect_data.c ARM: DRA7/AM335x/AM437x: hwmod: Remove gpmc address space from hwmod data 2015-10-23 13:01:24 -06:00
omap_hwmod_33xx_43xx_ipblock_data.c ARM: OMAP: AM43xx hwmod: Add data for am43xx emif hwmod 2015-06-01 19:22:11 -06:00
omap_hwmod_33xx_data.c ARM: OMAP: AM43xx hwmod: Add data for am43xx emif hwmod 2015-06-01 19:22:11 -06:00
omap_hwmod_43xx_data.c ARM: AM43XX: hwmod: Add rtc hwmod 2016-02-18 21:46:19 -07:00
omap_hwmod_44xx_data.c ARM: omap4: hwmod: Remove elm address space from hwmod data 2015-11-30 13:18:37 -08:00
omap_hwmod_54xx_data.c ARM: OMAP: Remove duplicated operand in OR operation 2015-10-20 01:29:40 -06:00
omap_hwmod_81xx_data.c ARM: SoC platform updates for v4.6 2016-03-20 14:57:08 -07:00
omap_hwmod_2420_data.c ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs 2014-07-15 05:08:56 -07:00
omap_hwmod_2430_data.c ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driver 2014-11-26 14:30:53 +01:00
omap_hwmod_common_data.c
omap_hwmod_common_data.h ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs 2014-07-15 05:08:56 -07:00
omap_hwmod_common_ipblock_data.c ARM: AM43xx: hwmod: add DSS hwmod data 2014-07-05 17:44:57 -06:00
omap_hwmod_reset.c
omap_hwmod.c ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property 2016-03-07 01:41:21 -07:00
omap_hwmod.h ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property 2016-03-07 01:41:21 -07:00
omap_opp_data.h
omap_phy_internal.c ARM: OMAP2+: Remove unused ti81xx platform init code 2015-01-14 17:21:00 -08:00
omap_twl.c mfd: twl-core: Fix idle mode signaling for omaps when booted with device tree 2014-04-23 15:31:05 +01:00
omap-headsmp.S ARM: omap5/dra7xx: Enable booting secondary CPU in HYP mode 2015-01-05 15:48:21 -08:00
omap-hotplug.c ARM: Remove __ref on hotplug cpu die path 2015-10-22 09:55:03 -07:00
omap-mpuss-lowpower.c ARM: OMAP2+: sparse: add missing static declaration 2015-07-15 23:42:12 -06:00
omap-pm-noop.c ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions 2015-01-07 09:53:51 -08:00
omap-pm.h ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions 2015-01-07 09:53:51 -08:00
omap-secure.c
omap-secure.h ARM: omap2: restore OMAP4 barrier behaviour 2015-07-25 15:28:16 +01:00
omap-smc.S
omap-smp.c ARM: use const and __initconst for smp_operations 2015-12-01 22:17:45 +01:00
omap-wakeupgen.c ARM: SoC cleanups for v4.4 2015-11-10 14:48:36 -08:00
omap-wakeupgen.h ARM: omap: convert wakeupgen to stacked domains 2015-03-15 00:56:13 +00:00
opp2xxx.h
opp3xxx_data.c
opp4xxx_data.c
opp2420_data.c
opp2430_data.c ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
opp.c ACPI and power management updates for 3.13-rc1 2013-11-14 13:41:48 +09:00
pdata-quirks.c ARM: OMAP: Add PWM dmtimer platform data quirks 2016-01-25 09:51:28 -08:00
pm24xx.c ARM: OMAP2+: Include clk.h 2015-07-20 10:52:36 -07:00
pm34xx.c ARM: OMAP2+: PM: Denote the cpuidle tracepoints as _rcuidle() 2015-10-12 16:09:57 -07:00
pm44xx.c ARM: OMAP2+: Remove unneeded semicolons 2015-10-12 10:56:36 -07:00
pm-debug.c
pm.c cpufreq: cpu0: rename driver and internals to 'cpufreq_dt' 2014-10-03 15:37:54 +02:00
pm.h ARM: OMAP4+: PM: erratum is used by OMAP5 and DRA7 as well 2015-09-14 12:14:47 -07:00
pmu.c ARM: OMAP2+: Remove calls to deprecacted marco,PTR_RET in the files,fb.c and pmu.c 2015-05-20 10:43:37 -07:00
powerdomain-common.c ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files 2014-05-15 22:35:10 -06:00
powerdomain.c arm: Use _rcuidle tracepoint to allow use from idle 2016-04-29 13:29:02 -07:00
powerdomain.h ARM: OMAP2+: powerdomain.c: Remove some unused functions 2015-01-07 09:53:51 -08:00
powerdomains2xxx_3xxx_data.c
powerdomains2xxx_3xxx_data.h
powerdomains2xxx_data.c
powerdomains3xxx_data.c ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx 2015-12-22 16:23:08 -08:00
powerdomains7xx_data.c ARM: OMAP: DRA7: powerdomain data: fix powerdomain powerstate 2014-09-08 11:22:31 -05:00
powerdomains33xx_data.c
powerdomains43xx_data.c ARM: OMAP2+: PM: AM43x powerdomain data 2013-10-13 22:48:25 -06:00
powerdomains44xx_data.c
powerdomains54xx_data.c ARM: OMAP5: powerdomain data: fix powerdomain powerstate 2014-09-08 11:22:40 -05:00
prcm43xx.h ARM: AM43xx: Add the PRM IRQ register offsets 2015-07-23 05:54:38 -06:00
prcm44xx.h
prcm_mpu7xx.h
prcm_mpu44xx.c ARM: OMAP2+: raw read and write endian fix 2014-05-08 07:09:53 -07:00
prcm_mpu44xx.h ARM: OMAP2+: PRCM: cleanup some header includes 2014-05-15 22:34:48 -06:00
prcm_mpu54xx.h
prcm_mpu_44xx_54xx.h
prcm-common.h Merge branch 'dm814x-soc' into omap-for-v4.3/soc 2015-07-23 21:59:18 -07:00
prm2xxx_3xxx.c ARM: OMAP2+: PRM: add generic API for checking hardreset status 2014-10-27 08:39:25 -07:00
prm2xxx_3xxx.h ARM: OMAP2+: PRM: add generic API for checking hardreset status 2014-10-27 08:39:25 -07:00
prm2xxx.c ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm2xxx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm3xxx.c ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm3xxx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm7xx.h ARM: DRA7: hwmod: Add reset data for PCIe 2016-02-09 02:18:52 -07:00
prm33xx.c ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm33xx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm44xx_54xx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm44xx.c ARM: OMAP4+: PRM: Add AM437x specific data 2015-07-23 06:08:24 -06:00
prm44xx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm54xx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm_common.c ARM: OMAP2+: Fix randconfig build warning for dm814_pllss_data 2015-12-22 17:01:02 -08:00
prm-regbits-24xx.h
prm-regbits-33xx.h
prm-regbits-34xx.h ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
prm-regbits-44xx.h ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
prm.h ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init 2015-03-31 21:26:53 +03:00
prminst44xx.c ARM: OMAP4+: PRM: add support for passing status register/bit info to reset 2015-05-08 13:05:15 -06:00
prminst44xx.h ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility 2015-03-31 21:26:44 +03:00
scrm44xx.h
scrm54xx.h
sdram-hynix-h8mbx00u0mer-0em.h
sdram-micron-mt46h32m32lf-6.h
sdram-nokia.c
sdram-nokia.h
sdram-numonyx-m65kxxxxam.h
sdram-qimonda-hyb18m512160af-6.h
sdrc2xxx.c ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
sdrc.c
sdrc.h ARM: OMAP2+: raw read and write endian fix 2014-05-08 07:09:53 -07:00
serial.c ARM: OMAP: serial: Rename DRIVER_NAME 2016-02-06 23:13:30 -08:00
serial.h
sleep24xx.S
sleep34xx.S ARM: OMAP2+: Fix l2_inv_api_params for rodata 2016-01-22 08:26:08 -08:00
sleep44xx.S ARM: OMAP2+: Fix ppa_zero_params and ppa_por_params for rodata 2016-01-22 08:26:08 -08:00
smartreflex-class3.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
soc.h ARM: OMAP: DRA7: Make use of omap_revision information for soc_is* calls 2016-02-19 10:12:52 -08:00
sr_device.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
sram242x.S ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
sram243x.S ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
sram.c ARM: OMAP3: clock: remove un-used core dpll re-program code 2015-10-14 12:35:27 -07:00
sram.h ARM: OMAP3: clock: remove un-used core dpll re-program code 2015-10-14 12:35:27 -07:00
ti81xx-restart.c ARM: OMAP2+: Fix reboot for 81xx 2015-01-14 17:37:16 -08:00
ti81xx.h
timer.c ARM: SoC platform updates for v4.5 2016-01-20 18:10:05 -08:00
twl-common.c ARM: OMAP: Work around hardcoded interrupts 2015-01-17 08:56:12 -08:00
twl-common.h
usb-host.c usb: phy: rename <linux/usb/usb_phy_gen_xceiv.h> to <linux/usb/usb_phy_generic.h> 2014-04-21 14:07:24 -05:00
usb-musb.c ARM: OMAP2+: Remove unused ti81xx platform init code 2015-01-14 17:21:00 -08:00
usb-tusb6010.c ARM OMAP2+ GPMC: calculate GPMCFCLKDIVIDER based on WAITMONITORINGTIME 2015-03-06 12:39:48 +02:00
usb.h ARM: OMAP2+: Remove unused ti81xx platform init code 2015-01-14 17:21:00 -08:00
vc3xxx_data.c ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
vc44xx_data.c ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
vc.c ARM: OMAP3: vc: Remove unused macros 2015-10-12 10:56:36 -07:00
vc.h ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
voltage.c ARM: OMAP2+: voltage: Remove some unused functions 2015-01-07 09:53:51 -08:00
voltage.h ARM: OMAP2+: voltage: Remove some unused functions 2015-01-07 09:53:51 -08:00
voltagedomains2xxx_data.c
voltagedomains3xxx_data.c ARM: appropriate __init annotation for const data 2015-07-28 13:55:27 +02:00
voltagedomains44xx_data.c ARM: appropriate __init annotation for const data 2015-07-28 13:55:27 +02:00
voltagedomains54xx_data.c ARM: appropriate __init annotation for const data 2015-07-28 13:55:27 +02:00
vp3xxx_data.c ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone 2015-03-25 11:03:39 +02:00
vp44xx_data.c ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone 2015-03-25 11:03:39 +02:00
vp.c
vp.h ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone 2015-03-25 11:03:39 +02:00
wd_timer.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
wd_timer.h