iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/net/wireless/ath/ath9k
History
Sujith Manoharan 14c5932805 ath9k: Update QCA953x initvals 
This patch disables HW peak detect calibration for
QCA953x, since it is problematic on a few boards.
Instead, manual calibration will be done in the
driver.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29 10:33:20 +02:00
..
ahb.c
ath9k: Add HW IDs for QCA956x
2015-01-15 14:24:57 +02:00
ani.c
ath9k: Add QCA956x HW support
2015-01-15 14:25:03 +02:00
ani.h
ath9k_hw: tweak noise immunity thresholds for older chipsets
2014-03-03 15:35:55 -05:00
antenna.c
ath9k: add support for reporting per-chain signal strength
2013-12-18 15:23:19 -05:00
ar953x_initvals.h
ath9k: Update QCA953x initvals
2015-01-29 10:33:20 +02:00
ar955x_1p0_initvals.h
ath9k: Update AR955x initvals
2014-10-27 14:16:17 -04:00
ar956x_initvals.h
ath9k: Add initvals for QCA956x
2015-01-15 14:24:59 +02:00
ar5008_initvals.h
…
ar5008_phy.c
ath9k: add power per-rate tables for AR9002 chips
2015-01-15 14:47:06 +02:00
ar9001_initvals.h
…
ar9002_calib.c
ath9k_hw: start initial NF calibration after PA calibration on <AR9003
2014-10-27 14:16:18 -04:00
ar9002_hw.c
ath9k: Register supported HW hang checks
2014-01-03 15:36:57 -05:00
ar9002_initvals.h
…
ar9002_mac.c
ath9k: add TPC capability to TX descriptor path
2014-11-25 14:09:56 -05:00
ar9002_phy.c
ath9k: For AR9271 chipsets, set count = 0 for endless samples.
2014-11-11 16:31:14 -05:00
ar9002_phy.h
…
ar9003_2p2_initvals.h
ath9k_hw: update ar9300 initvals
2014-04-30 12:13:15 -04:00
ar9003_buffalo_initvals.h
ath9k: Use a separate TX gain table for WZR-HP-G450H
2013-12-09 15:37:58 -05:00
ar9003_calib.c
ath9k: restart hardware after noise floor calibration failure
2014-10-27 14:16:18 -04:00
ar9003_eeprom.c
ath9k: Add QCA956x HW support
2015-01-15 14:25:03 +02:00
ar9003_eeprom.h
ath9k: Update BaseExtension_1 eeprom structure
2013-12-18 15:23:44 -05:00
ar9003_hw.c
ath9k: Add initvals for QCA956x
2015-01-15 14:24:59 +02:00
ar9003_mac.c
ath9k: add TPC capability to TX descriptor path
2014-11-25 14:09:56 -05:00
ar9003_mac.h
…
ar9003_mci.c
…
ar9003_mci.h
…
ar9003_paprd.c
…
ar9003_phy.c
ath9k: Add QCA956x HW support
2015-01-15 14:25:03 +02:00
ar9003_phy.h
ath9k: Fix register definitions for QCA956x
2015-01-15 14:25:01 +02:00
ar9003_rtt.c
…
ar9003_rtt.h
ath9k_hw: make support for PC-OEM cards optional
2014-10-27 14:16:18 -04:00
ar9003_wow.c
ath9k: Fix wow.c compilation
2013-12-02 14:24:53 -05:00
ar9330_1p1_initvals.h
ath9k_hw: update ar9300 initvals
2014-04-30 12:13:15 -04:00
ar9330_1p2_initvals.h
ath9k_hw: update ar9300 initvals
2014-04-30 12:13:15 -04:00
ar9340_initvals.h
ath9k_hw: fix worse EVM for 11b rates
2014-04-30 12:13:16 -04:00
ar9462_2p0_initvals.h
ath9k: Fix ETSI compliance for AR9462 2.0
2014-02-20 15:53:20 -05:00
ar9462_2p1_initvals.h
ath9k: Remove duplicate initvals for AR9462 v2.1
2013-12-02 14:25:02 -05:00
ar9485_initvals.h
ath9k: Identify duplicate AR9485 initvals
2013-12-09 15:37:59 -05:00
ar9565_1p0_initvals.h
ath9k: Identify duplicate AR9565 v1.0 initvals
2013-12-09 15:38:00 -05:00
ar9565_1p1_initvals.h
ath9k: Add initvals for AR9565 1.1
2013-12-02 14:25:01 -05:00
ar9580_1p0_initvals.h
ath9k: Update AR9580 initvals
2014-10-27 14:16:17 -04:00
ath9k.h
ath9k and ath9k_htc: rename variable "led_blink"
2015-01-27 20:06:27 +02:00
beacon.c
ath9k: add TPC capability to TX descriptor path
2014-11-25 14:09:56 -05:00
btcoex.c
ath9k_hw: clean up generic timer code
2013-12-18 15:23:22 -05:00
btcoex.h
…
calib.c
ath9k: restart hardware after noise floor calibration failure
2014-10-27 14:16:18 -04:00
calib.h
ath9k: restart hardware after noise floor calibration failure
2014-10-27 14:16:18 -04:00
channel.c
mac80211: allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDR
2014-11-19 18:46:09 +01:00
common-beacon.c
Revert "ath9k: Calculate sleep duration"
2014-09-11 14:17:20 -04:00
common-beacon.h
ath9k: move ath9k_beacon_config_ap common
2014-03-17 13:13:08 -04:00
common-debug.c
ath9k: move phy_err to ath9k_cmn_debug_phy_err
2014-05-13 15:56:42 -04:00
common-debug.h
ath9k: move phy_err to ath9k_cmn_debug_phy_err
2014-05-13 15:56:42 -04:00
common-init.c
ath9k: move ath9k_reload_chainmask_settings to common
2014-02-28 14:33:16 -05:00
common-init.h
ath9k: move ath9k_reload_chainmask_settings to common
2014-02-28 14:33:16 -05:00
common-spectral.c
ath9k: move spectral.* to common-spectral.*
2014-11-11 16:31:14 -05:00
common-spectral.h
ath9k: common-spectral: don't depend from ATH9K_DEBUGFS
2014-11-17 15:32:14 -05:00
common.c
Merge commit '4e6ce4dc7ce71d0886908d55129d5d6482a27ff9' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-11-19 15:38:48 -05:00
common.h
ath9k: move spectral.* to common-spectral.*
2014-11-11 16:31:14 -05:00
debug_sta.c
ath9k: remove tid->paused flag
2014-04-30 11:42:35 -04:00
debug.c
ath9k: enable per-packet TPC on AR9002 based chips
2015-01-15 14:47:34 +02:00
debug.h
Driver core patches for 3.19-rc1
2014-12-14 16:10:09 -08:00
dfs_debug.c
ath9k: dfs_debug fix possible NULL dereference
2013-11-11 14:42:43 -05:00
dfs_debug.h
ath9k: simplify DFS pulse interval debug printing
2014-05-29 13:08:10 -04:00
dfs.c
ath9k: simplify DFS pulse interval debug printing
2014-05-29 13:08:10 -04:00
dfs.h
…
dynack.c
ath9k: fix getting tx duration for dynack
2014-09-30 13:17:48 -04:00
dynack.h
ath9k: add dynamic ACK timeout estimation
2014-09-16 16:18:30 -04:00
eeprom_4k.c
ath9k: add power per-rate tables for AR9002 chips
2015-01-15 14:47:06 +02:00
eeprom_9287.c
ath9k: add power per-rate tables for AR9002 chips
2015-01-15 14:47:06 +02:00
eeprom_def.c
ath9k: add power per-rate tables for AR9002 chips
2015-01-15 14:47:06 +02:00
eeprom.c
…
eeprom.h
…
gpio.c
ath9k and ath9k_htc: rename variable "led_blink"
2015-01-27 20:06:27 +02:00
hif_usb.c
ath9k_htc: Add device ID for Buffalo WLI-UV-AG300P
2014-02-12 15:36:04 -05:00
hif_usb.h
…
htc_drv_beacon.c
ath9k_htc: move DEFAULT_SWBA_RESPONSE check to ath9k_htc_beacon_init
2014-03-17 13:13:09 -04:00
htc_drv_debug.c
ath9k_htc: add spectral scan debug interface
2014-11-11 16:31:15 -05:00
htc_drv_gpio.c
ath9k and ath9k_htc: rename variable "led_blink"
2015-01-27 20:06:27 +02:00
htc_drv_init.c
ath9k and ath9k_htc: rename variable "led_blink"
2015-01-27 20:06:27 +02:00
htc_drv_main.c
mac80211: allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDR
2014-11-19 18:46:09 +01:00
htc_drv_txrx.c
ath9k_htc: process rx spectral packets
2014-11-11 16:31:15 -05:00
htc_hst.c
ath9k_htc: remove dead code in error path of ath9k_htc_txcompletion_cb
2015-01-23 21:16:02 +02:00
htc_hst.h
ath9k_htc: catch fw panic pattern
2014-02-12 15:36:03 -05:00
htc.h
ath9k and ath9k_htc: rename variable "led_blink"
2015-01-27 20:06:27 +02:00
hw-ops.h
ath9k: restart hardware after noise floor calibration failure
2014-10-27 14:16:18 -04:00
hw.c
ath9k: enable per-packet TPC on AR9002 based chips
2015-01-15 14:47:34 +02:00
hw.h
ath9k: add power per-rate tables for AR9002 chips
2015-01-15 14:47:06 +02:00
init.c
ath9k and ath9k_htc: rename variable "led_blink"
2015-01-27 20:06:27 +02:00
Kconfig
ath9k_common: make sure DEBUG_FS and RELAY enabled
2014-11-19 15:50:04 -05:00
link.c
cfg80211: remove "channel" from survey names
2015-01-08 15:27:52 +01:00
mac.c
ath9k: Add QCA956x HW support
2015-01-15 14:25:03 +02:00
mac.h
ath9k: add TPC capability to TX descriptor path
2014-11-25 14:09:56 -05:00
main.c
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-12-08 13:58:58 -05:00
Makefile
ath9k: move spectral.* to common-spectral.*
2014-11-11 16:31:14 -05:00
mci.c
ath9k: Move caldata into channel context
2014-06-19 15:49:18 -04:00
mci.h
…
pci.c
ath9k: Update PCI IDs for AR9565
2015-01-15 14:53:26 +02:00
phy.h
…
recv.c
ath9k: Add QCA956x HW support
2015-01-15 14:25:03 +02:00
reg.h
ath9k: Add HW IDs for QCA956x
2015-01-15 14:24:57 +02:00
tx99.c
ath9k: Unify reset API
2014-10-27 14:16:14 -04:00
wmi.c
…
wmi.h
…
wow.c
ath9k: Fix interface accounting
2014-09-09 15:27:21 -04:00
xmit.c
ath9k: Fix no-ack frame status
2015-01-23 19:00:37 +02:00