Roger Quadros 302946dee9 ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring
NAND uses wait pin only to indicate device readiness after
a block/page operation. It is not use to extend individual
read/write cycle and so read/write wait pin monitoring must
be disabled for NAND.

This patch also gets rid of the below warning when NAND is
accessed for the first time.

omap_l3_noc 44000000.ocp: L3 application error: target 13 mod:1 (unclearable)

Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Pekon Gupta <pekon@pek-sem.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-04 12:39:08 -07:00
..
2014-07-15 05:08:56 -07:00
2014-01-17 12:36:41 -08:00
2014-05-19 21:55:03 -07:00
2014-06-25 20:26:30 +02:00
2014-07-28 17:04:15 +02:00
2014-07-28 17:04:15 +02:00
2013-09-06 13:26:27 -07:00
2013-11-18 14:50:17 -08:00
2014-03-29 02:03:39 +01:00
2014-08-08 11:14:29 -07:00
2014-07-18 16:49:35 +08:00
2014-05-19 21:55:03 -07:00
2014-05-19 21:55:03 -07:00
2014-05-19 21:55:03 -07:00
2014-08-08 11:16:58 -07:00
2014-07-15 05:08:56 -07:00
2014-04-18 16:40:08 -07:00
2014-05-21 14:20:27 +02:00
2014-08-08 11:00:26 -07:00
2014-08-08 11:00:26 -07:00
2014-08-08 11:00:26 -07:00
2014-05-06 10:19:49 -07:00
2014-07-18 16:49:47 +08:00
2014-04-23 15:24:06 -04:00
2014-04-23 15:24:06 -04:00
2014-04-23 15:24:06 -04:00
2014-07-29 07:31:40 +02:00
2014-07-29 07:31:40 +02:00
2014-01-31 14:58:56 -08:00