linux/drivers/phy
Roger Quadros 325ce0fe58 phy: ti-pipe3: Use TRM recommended settings for SATA DPLL
The AM572x Technical Reference Manual, SPRUHZ6H,
Revised November 2016 [1], shows recommended settings for the
SATA DPLL in Table 26-8. DPLL CLKDCOLDO Recommended Settings.

Use those settings in the driver. The TRM does not show
a value for 20MHz SYS_CLK so we use something close to the
26MHz setting.

[1] - http://www.ti.com/lit/ug/spruhz6h/spruhz6h.pdf

Signed-off-by: Roger Quadros <rogerq@ti.com>
[nsekhar@ti.com: add exact TRM version to commit text]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-08-20 13:59:47 +05:30
..
allwinner phy: allwinner: phy-sun4i-usb: Add log when probing 2017-07-21 13:06:30 +05:30
amlogic phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs 2017-06-06 14:50:14 +05:30
broadcom phy: bcm-ns-usb3: add MDIO driver using proper bus layer 2017-06-16 13:22:26 +05:30
hisilicon phy: Group vendor specific phy drivers 2017-06-01 15:28:33 +05:30
marvell phy: Group vendor specific phy drivers 2017-06-01 15:28:33 +05:30
motorola phy: cpcap-usb: Fix missing return statement 2017-06-16 11:40:21 +05:30
qualcomm phy: qcom-qmp: Fix failure path in phy_init functions 2017-08-20 13:59:46 +05:30
renesas phy: rcar-gen3-usb3: add support for R-Car Gen3 USB 3.0 PHY 2017-06-07 17:55:13 +05:30
rockchip phy: rockchip-inno-usb2: add support of usb2-phy for rk3228 SoCs 2017-06-06 14:50:25 +05:30
samsung phy: Group vendor specific phy drivers 2017-06-01 15:28:33 +05:30
st phy: Group vendor specific phy drivers 2017-06-01 15:28:33 +05:30
tegra phy: fix returnvar.cocci warnings 2016-11-18 18:19:16 +05:30
ti phy: ti-pipe3: Use TRM recommended settings for SATA DPLL 2017-08-20 13:59:47 +05:30
Kconfig phy: cpcap-usb: Add CPCAP PMIC USB support 2017-06-06 14:50:21 +05:30
Makefile phy: cpcap-usb: Add CPCAP PMIC USB support 2017-06-06 14:50:21 +05:30
phy-core.c phy: Add reset callback 2016-09-10 17:31:39 +05:30
phy-lpc18xx-usb-otg.c phy: lpc18xx-usb-otg: fix clock order in phy init 2015-08-10 20:11:58 +05:30
phy-mt65xx-usb3.c phy: phy-mt65xx-usb3: disable 100uA extraction from SS port to HS port 2017-04-10 16:43:40 +05:30
phy-pistachio-usb.c PHY: Add driver for Pistachio USB2.0 PHY 2015-06-21 21:53:38 +02:00
phy-xgene.c phy: xgene: rename "enum phy_mode" to "enum xgene_phy_mode" 2016-07-04 17:19:21 +05:30