Christian Marangi 38f897ae3d PCI: qcom: Set up rev 2.1.0 PARF_PHY before enabling clocks
We currently enable clocks BEFORE we write to PARF_PHY_CTRL reg to enable
clocks and resets. This causes the driver to never set to a ready state
with the error 'Phy link never came up'.

This is caused by the PHY clock getting enabled before setting the required
bits in the PARF regs.

A workaround for this was set but with this new discovery we can drop
the workaround and use a proper solution to the problem by just enabling
the clock only AFTER the PARF_PHY_CTRL bit is set.

This correctly sets up the PCIe link and makes it usable even when a
bootloader leaves the PCIe link in an undefined state.

Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
Link: https://lore.kernel.org/r/20220708222743.27019-1-ansuelsmth@gmail.com
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-13 14:53:02 -05:00
..
2022-01-23 06:20:44 +02:00
2022-01-16 08:08:11 +02:00
2021-02-24 11:09:50 -06:00
2022-03-22 17:16:24 -05:00
2022-03-25 13:02:05 -07:00