iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/net/wireless/ath/ath9k
History
Luis R. Rodriguez 3deb4da554 ath9k_hw: set cwmin and cwmax to 0 for for AR9003 upon txq reset 
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16 15:43:47 -04:00
..
ahb.c
ath: Add a bus type field
2010-04-06 16:55:09 -04:00
ani.c
ath9k_hw: Split off ANI control to the PHY ops
2010-04-16 15:43:25 -04:00
ani.h
ath9k: Nuke struct ath9k_node_stats
2009-08-20 11:36:08 -04:00
ar5008_initvals.h
ath9k_hw: split initvals.h by hardware family
2010-04-16 15:43:24 -04:00
ar5008_phy.c
ath9k_hw: abstract loading noisefloor
2010-04-16 15:43:34 -04:00
ar9001_initvals.h
ath9k_hw: split initvals.h by hardware family
2010-04-16 15:43:24 -04:00
ar9002_calib.c
ath9k_hw: fill in the callbacks for calibration for AR9003
2010-04-16 15:43:35 -04:00
ar9002_hw.c
ath9k_hw: skip WEP aggregation enable code for AR9003
2010-04-16 15:43:44 -04:00
ar9002_initvals.h
ath9k_hw: split initvals.h by hardware family
2010-04-16 15:43:24 -04:00
ar9002_mac.c
ath9k_hw: move AR9002 mac ops to its own file
2010-04-16 15:43:45 -04:00
ar9002_phy.c
ath9k_hw: Split out the function for reading the noise floor
2010-04-16 15:43:27 -04:00
ar9002_phy.h
ath9k_hw: add OFDM spur mitigation for AR9003
2010-04-16 15:43:38 -04:00
ar9003_calib.c
ath9k_hw: complete AR9003 calibration
2010-04-16 15:43:35 -04:00
ar9003_eeprom.c
ath9k_hw: add TX/RX gain register initialization for AR9003
2010-04-16 15:43:43 -04:00
ar9003_eeprom.h
ath9k_hw: add TX/RX gain register initialization for AR9003
2010-04-16 15:43:43 -04:00
ar9003_hw.c
ath9k_hw: move AR9002 mac ops to its own file
2010-04-16 15:43:45 -04:00
ar9003_initvals.h
ath9k_hw: add initvals for the AR9003 hardware family
2010-04-16 15:43:24 -04:00
ar9003_mac.c
ath9k_hw: Fill descriptor abstrations for AR9003
2010-04-16 15:43:45 -04:00
ar9003_mac.h
ath9k_hw: Fill descriptor abstrations for AR9003
2010-04-16 15:43:45 -04:00
ar9003_phy.c
ath9k_hw: add OFDM spur mitigation for AR9003
2010-04-16 15:43:38 -04:00
ar9003_phy.h
ath9k_hw: add OFDM spur mitigation for AR9003
2010-04-16 15:43:38 -04:00
ath9k.h
ath9k: Add Rx EDMA support
2010-04-16 15:43:26 -04:00
beacon.c
ath9k_hw: Define abstraction for tx desc access
2010-04-16 15:43:44 -04:00
btcoex.c
ath9k: move hw code to its own module
2009-10-07 16:39:41 -04:00
btcoex.h
ath9k: Fix wifi disconnection when collocated bt scan is active
2010-01-22 16:11:32 -05:00
calib.c
ath9k_hw: abstract loading noisefloor
2010-04-16 15:43:34 -04:00
calib.h
ath9k_hw: fill in the callbacks for calibration for AR9003
2010-04-16 15:43:35 -04:00
common.c
ath9k: Do not indicate RX_FLAG_DECRYPTED for unprotected frames
2010-03-31 14:46:42 -04:00
common.h
ath9k: Make bf_desc of ath_buf opaque
2010-04-16 15:43:26 -04:00
debug.c
ath9k: add RXLP and RXHP to debugfs counters
2010-04-16 15:43:46 -04:00
debug.h
ath9k: add RXLP and RXHP to debugfs counters
2010-04-16 15:43:46 -04:00
eeprom_4k.c
ath9k_hw: restore mac address reading logic
2010-04-16 15:43:36 -04:00
eeprom_9287.c
ath9k_hw: restore mac address reading logic
2010-04-16 15:43:36 -04:00
eeprom_def.c
ath9k_hw: move AR9280 PCI EEPROM fix to eeprom_def.c
2010-04-16 15:43:40 -04:00
eeprom.c
ath9k_hw: Implement AR9003 eeprom callbacks
2010-04-16 15:43:37 -04:00
eeprom.h
ath9k_hw: Implement AR9003 eeprom callbacks
2010-04-16 15:43:37 -04:00
gpio.c
wireless/ath: remove trailing space in messages
2010-04-08 15:20:44 -04:00
hif_usb.c
ath9k-htc: fix lockdep warning and kernel warning after unplugging ar9271 usb device
2010-04-14 14:58:37 -04:00
hif_usb.h
ath9k_htc: Use anchors for REGOUT pipe
2010-04-08 15:24:10 -04:00
htc_drv_beacon.c
ath9k_htc: Configure the beacon timers once the scan is completed.
2010-04-07 14:37:59 -04:00
htc_drv_init.c
ath9k_htc: Add support for power save.
2010-04-07 14:37:58 -04:00
htc_drv_main.c
ath9k_htc: Configure the beacon timers once the scan is completed.
2010-04-07 14:37:59 -04:00
htc_drv_txrx.c
ath9k_htc: Add support for power save.
2010-04-07 14:37:58 -04:00
htc_hst.c
ath9k-htc:respect usb buffer cacheline alignment in reg out path
2010-04-14 14:52:43 -04:00
htc_hst.h
ath9k_htc: Support for AR9271 chipset.
2010-03-23 16:50:17 -04:00
htc.h
ath9k_htc: Configure the beacon timers once the scan is completed.
2010-04-07 14:37:59 -04:00
hw-ops.h
ath9k_hw: Define abstraction for tx desc access
2010-04-16 15:43:44 -04:00
hw.c
ath9k_hw: move AR9002 mac ops to its own file
2010-04-16 15:43:45 -04:00
hw.h
ath9k_hw: move AR9002 mac ops to its own file
2010-04-16 15:43:45 -04:00
init.c
ath9k_hw: Move some RF ops to the private callbacks
2010-04-16 15:43:19 -04:00
Kconfig
ath9k_htc: Support for AR9271 chipset.
2010-03-23 16:50:17 -04:00
mac.c
ath9k_hw: set cwmin and cwmax to 0 for for AR9003 upon txq reset
2010-04-16 15:43:47 -04:00
mac.h
ath9k_hw: Fill descriptor abstrations for AR9003
2010-04-16 15:43:45 -04:00
main.c
ath9k: Add Rx EDMA support
2010-04-16 15:43:26 -04:00
Makefile
ath9k_hw: move AR9002 mac ops to its own file
2010-04-16 15:43:45 -04:00
pci.c
ath: Add a bus type field
2010-04-06 16:55:09 -04:00
phy.h
ath9k_hw: add OFDM spur mitigation for AR9003
2010-04-16 15:43:38 -04:00
rc.c
ath9k: fix rate control tx status handling for A-MPDU
2010-03-10 17:44:45 -05:00
rc.h
ath9k: rename symbols in enum ath9k_internal_frame_type to avoid confusion
2010-04-06 16:55:08 -04:00
recv.c
ath9k_hw: move AR9002 mac ops to its own file
2010-04-16 15:43:45 -04:00
reg.h
ath9k_hw: enable CRC check of descriptors for AR9003
2010-04-16 15:43:46 -04:00
virtual.c
ath9k: rename symbols in enum ath9k_internal_frame_type to avoid confusion
2010-04-06 16:55:08 -04:00
wmi.c
ath9k-htc:respect usb buffer cacheline alignment in reg out path
2010-04-14 14:52:43 -04:00
wmi.h
ath9k_htc: Support for AR9271 chipset.
2010-03-23 16:50:17 -04:00
xmit.c
ath9k_hw: move AR9002 mac ops to its own file
2010-04-16 15:43:45 -04:00