iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/clk/qcom
History
Taniya Das e5c359f70e clk: qcom: camcc: Update the clock ops for the SC7180 
Some of the RCGs could be always ON from the XO source and could be used
as the clock on signal for the GDSC to be operational. In the cases where
the GDSCs are parked at different source with the source clock disabled,
it could lead to the GDSC to be stuck at ON/OFF during gdsc disable/enable.
Thus park the RCGs at XO during clock disable and update the rcg_ops to
use the shared_ops.

Fixes: 15d09e830bbc ("clk: qcom: camcc: Add camera clock controller driver for SC7180")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1616809265-11912-1-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-03-29 14:08:32 -07:00
..
a7-pll.c
clk: qcom: Add A7 PLL support
2021-02-08 09:46:23 -08:00
a53-pll.c
clk: qcom: Add A53 PLL support
2018-01-02 10:00:24 -08:00
apcs-msm8916.c
clk: qcom: apcs-msm8916: use clk_parent_data to specify the parent
2020-01-04 23:15:47 -08:00
apcs-sdx55.c
clk: qcom: Add SDX55 APCS clock controller support
2021-02-08 09:46:23 -08:00
apss-ipq6018.c
clk: qcom: Fix return value check in apss_ipq6018_probe()
2020-06-29 14:15:34 -07:00
apss-ipq-pll.c
clk: qcom: Add ipq apss pll driver
2020-06-22 00:21:59 -07:00
camcc-sc7180.c
clk: qcom: camcc: Update the clock ops for the SC7180
2021-03-29 14:08:32 -07:00
camcc-sdm845.c
clk: qcom: Add camera clock controller driver for SDM845
2018-08-30 18:27:06 -07:00
clk-alpha-pll.c
clk: qcom: clk-alpha-pll: Add support for Lucid 5LPE PLL
2021-02-08 10:03:57 -08:00
clk-alpha-pll.h
clk: qcom: clk-alpha-pll: Add support for Lucid 5LPE PLL
2021-02-08 10:03:57 -08:00
clk-branch.c
clk: qcom: branch: Add AON clock ops
2019-04-11 13:34:21 -07:00
clk-branch.h
clk: qcom: branch: Add AON clock ops
2019-04-11 13:34:21 -07:00
clk-cpu-8996.c
clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static
2020-07-20 17:40:18 -07:00
clk-hfpll.c
clk: let init callback return an error code
2019-12-23 18:53:13 -08:00
clk-hfpll.h
clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
2018-10-17 13:14:37 -07:00
clk-krait.c
clk: qcom: Add safe switch hook for krait mux clocks
2018-10-17 13:15:05 -07:00
clk-krait.h
clk: qcom: Add safe switch hook for krait mux clocks
2018-10-17 13:15:05 -07:00
clk-pll.c
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
2019-06-05 17:36:37 +02:00
clk-pll.h
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
2019-06-05 17:36:37 +02:00
clk-rcg2.c
clk: qcom: rcg2: Rectify clk_gfx3d rate rounding without mux division
2021-03-13 12:59:46 -08:00
clk-rcg.c
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
2019-06-05 17:36:37 +02:00
clk-rcg.h
clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers
2021-02-14 12:56:54 -08:00
clk-regmap-divider.c
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
2019-06-05 17:36:37 +02:00
clk-regmap-divider.h
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
2019-06-05 17:36:37 +02:00
clk-regmap-mux-div.c
clk: qcom: Add regmap mux-div clocks support
2018-01-02 10:00:24 -08:00
clk-regmap-mux-div.h
clk: qcom: Use the correct style for SPDX License Identifier
2019-05-01 13:01:13 -07:00
clk-regmap-mux.c
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
2019-06-05 17:36:37 +02:00
clk-regmap-mux.h
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
2019-06-05 17:36:37 +02:00
clk-regmap.c
clk: qcom: clk-regmap: Provide missing description for 'devm_clk_register_regmap()'s dev param
2021-02-10 19:42:51 -08:00
clk-regmap.h
clk: define to_clk_regmap() as inline function
2020-10-28 16:34:44 -07:00
clk-rpm.c
clk: qcom: clk-rpm: Remove a bunch of superfluous code
2021-02-11 11:56:06 -08:00
clk-rpmh.c
clk: qcom: rpmh: Update the XO clock source for SC7280
2021-03-13 12:58:18 -08:00
clk-smd-rpm.c
clk: qcom: smd: Add support for MSM8992/4 rpm clocks
2020-07-11 09:19:24 -07:00
clk-spmi-pmic-div.c
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284
2019-06-05 17:36:37 +02:00
common.c
clk: qcom: Allow constant ratio freq tables for rcg
2019-11-07 13:43:19 -08:00
common.h
clk: qcom: define probe by index API as common API
2019-08-08 08:20:01 -07:00
dispcc-sc7180.c
clk: qcom: dispcc: Update DP clk ops for phy design
2020-09-22 11:51:08 -07:00
dispcc-sdm845.c
clk: qcom: dispcc: Add support for display port clocks
2019-12-18 21:24:13 -08:00
dispcc-sm8250.c
clk: qcom: dispcc-sm8250: handle MMCX power domain
2020-11-14 13:11:44 -08:00
gcc-apq8084.c
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
2019-06-05 17:36:37 +02:00
gcc-ipq806x.c
ipq806x: gcc: add support for child probe
2020-07-21 00:10:21 -07:00
gcc-ipq4019.c
clk: qcom: gcc-ipq4019: Remove unused variable 'ret'
2021-02-11 11:56:05 -08:00
gcc-ipq6018.c
clk: qcom: Add ipq6018 Global Clock Controller support
2020-01-09 12:42:55 -08:00
gcc-ipq8074.c
clk: qcom: ipq8074: make pcie0_rchng_clk_src static
2020-09-22 11:34:33 -07:00
gcc-mdm9615.c
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
2019-06-05 17:36:37 +02:00
gcc-msm8660.c
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
2019-06-05 17:36:37 +02:00
gcc-msm8916.c
clk: qcom: msm8916: Fix the address location of pll->config_reg
2020-04-21 19:45:18 -07:00
gcc-msm8939.c
clk: qcom: gcc-msm8939: remove defined but not used variables
2020-09-22 11:50:23 -07:00
gcc-msm8960.c
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
2019-06-05 17:36:37 +02:00
gcc-msm8974.c
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
2019-06-05 17:36:37 +02:00
gcc-msm8994.c
clk: qcom: gcc-msm8994: Add missing clocks, resets and GDSCs
2020-10-13 18:04:36 -07:00
gcc-msm8996.c
clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks
2020-01-06 08:55:28 -08:00
gcc-msm8998.c
clk: qcom: gcc-msm8998: Fix Alpha PLL type for all GPLLs
2021-02-08 10:17:49 -08:00
gcc-qcs404.c
clk: qcom: gcc: limit GPLL0_AO_OUT operating frequency
2019-12-18 22:07:52 -08:00
gcc-sc7180.c
clk: qcom: gcc-sc7180: Use floor ops for the correct sdcc1 clk
2021-03-13 13:00:05 -08:00
gcc-sc7280.c
clk: qcom: Add Global Clock controller (GCC) driver for SC7280
2021-02-14 12:56:55 -08:00
gcc-sc8180x.c
clk: qcom: gcc: Add global clock controller driver for SC8180x
2021-02-08 09:59:46 -08:00
gcc-sdm660.c
clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical
2021-02-14 12:56:54 -08:00
gcc-sdm845.c
clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845
2020-07-21 00:44:11 -07:00
gcc-sdx55.c
clk: qcom: Add GDSC support for SDX55 GCC
2020-12-07 17:00:14 -08:00
gcc-sm8150.c
clk: qcom: gcc: remove unnecessary vco_table from SM8150
2020-07-24 01:51:14 -07:00
gcc-sm8250.c
clk: qcom: gcc-sm250: Use floor ops for sdcc clks
2021-01-12 12:10:52 -08:00
gcc-sm8350.c
clk: qcom: gcc-sm8350: add gdsc
2021-02-14 12:56:55 -08:00
gdsc.c
clk: qcom: gdsc: Implement NO_RET_PERIPH flag
2021-02-14 12:56:54 -08:00
gdsc.h
clk: qcom: gdsc: Implement NO_RET_PERIPH flag
2021-02-14 12:56:54 -08:00
gpucc-msm8998.c
clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting
2021-02-14 12:56:54 -08:00
gpucc-sc7180.c
clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers
2020-07-24 01:51:26 -07:00
gpucc-sdm660.c
clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver
2021-02-14 12:56:54 -08:00
gpucc-sdm845.c
clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers
2020-07-24 01:51:26 -07:00
gpucc-sm8150.c
clk: qcom: Add graphics clock controller driver for SM8150
2020-07-24 01:51:29 -07:00
gpucc-sm8250.c
clk: qcom: Add graphics clock controller driver for SM8250
2020-07-24 01:51:32 -07:00
hfpll.c
clk: qcom: hfpll: use clk_parent_data to specify the parent
2019-12-18 22:07:52 -08:00
Kconfig
clk: qcom: Add Global Clock controller (GCC) driver for SC7280
2021-02-14 12:56:55 -08:00
kpss-xcc.c
clk: qcom: Add KPSS ACC/GCC driver
2018-10-17 13:14:54 -07:00
krait-cc.c
clk: qcom: Add safe switch hook for krait mux clocks
2018-10-17 13:15:05 -07:00
lcc-ipq806x.c
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
2019-06-05 17:36:37 +02:00
lcc-mdm9615.c
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
2019-06-05 17:36:37 +02:00
lcc-msm8960.c
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
2019-06-05 17:36:37 +02:00
lpass-gfm-sm8250.c
clk: qcom: gfm-mux: fix clk mask
2021-02-08 09:50:46 -08:00
lpasscc-sdm845.c
clk: qcom: define probe by index API as common API
2019-08-08 08:20:01 -07:00
lpasscorecc-sc7180.c
clk: qcom: lpasscc: Introduce pm autosuspend for SC7180
2020-12-10 12:29:21 -08:00
Makefile
clk: qcom: Add Global Clock controller (GCC) driver for SC7280
2021-02-14 12:56:55 -08:00
mmcc-apq8084.c
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
2019-06-05 17:36:37 +02:00
mmcc-msm8960.c
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
2019-06-05 17:36:37 +02:00
mmcc-msm8974.c
clk: qcom: mmcc-msm8974: Remove unused static const tables 'mmcc_xo_mmpll0_1_2_gpll0{map}'
2021-02-11 11:56:06 -08:00
mmcc-msm8996.c
clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d
2021-02-14 12:56:54 -08:00
mmcc-msm8998.c
clk: qcom: mmcc-msm8998: Set bimc_smmu_gdsc always on
2021-02-08 10:24:34 -08:00
mmcc-sdm660.c
clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver
2021-02-14 12:56:54 -08:00
mss-sc7180.c
clk: qcom: Add modem clock controller driver for SC7180
2020-03-20 16:28:05 -07:00
q6sstop-qcs404.c
clk: qcom: Add Q6SSTOP clock controller for QCS404
2019-11-07 13:10:36 -08:00
reset.c
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
2019-06-05 17:36:37 +02:00
reset.h
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
2019-06-05 17:36:37 +02:00
turingcc-qcs404.c
clk: qcom: fix QCS404 TuringCC regmap
2019-09-09 09:05:22 -07:00
videocc-sc7180.c
clk: qcom: videocc: Update the clock flag for video_cc_vcodec0_core_clk
2020-02-12 15:02:44 -08:00
videocc-sdm845.c
clk: qcom: Move frequency table macro to common file
2018-07-06 16:45:51 -07:00
videocc-sm8150.c
clk: qcom: add video clock controller driver for SM8150
2020-10-13 18:05:04 -07:00
videocc-sm8250.c
clk: qcom: videocc: Add gdsc mmcx-reg supply hook
2021-02-08 10:12:29 -08:00