Tony Lindgren 5b7610f235 ARM: OMAP2+: Fix wl12xx on dm3730-evm with mainline u-boot ...

I upgraded my u-boot and noticed that wl12xx stopped working.
Turns out the kernel is not setting the quirk for the MMC2
copy clock while the eariler bootloader I had was setting it.

Signed-off-by: Tony Lindgren <tony@atomide.com>

2015-03-06 10:37:34 -08:00

..

include/mach

ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, too

2013-12-20 17:17:16 +01:00

am33xx-restart.c

ARM: OMAP2+: PRM: provide generic API for system reset

2014-10-27 08:39:26 -07:00

am33xx.h

ARM: OMAP2+: AM43x: early init

2013-06-12 08:00:35 -07:00

board-cm-t35.c

ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header

2014-11-20 12:11:25 -08:00

board-devkit8000.c

arm: omap: irq: drop omap3_intc_handle_irq()

2014-09-11 13:05:40 -07:00

board-flash.c

ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header

2014-11-20 12:11:25 -08:00

board-flash.h

ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header

2014-11-20 12:11:25 -08:00

board-generic.c

ARM: SoC platform changes

2015-02-17 09:27:54 -08:00

board-ldp.c

arm: omap: irq: drop omap3_intc_handle_irq()

2014-09-11 13:05:40 -07:00

board-n8x0.c

ARM: SoC/OMAP GPMC driver cleanup and move for 3.19

2014-12-09 16:57:56 -08:00

board-omap3beagle.c

arm: omap: irq: drop omap3_intc_handle_irq()

2014-09-11 13:05:40 -07:00

board-omap3logic.c

arm: omap: irq: drop omap3_intc_handle_irq()

2014-09-11 13:05:40 -07:00

board-omap3pandora.c

ARM: OMAP2+: Make sure pandora_wl1251_init_card() applies to SDIO only

2015-01-19 09:56:04 +01:00

board-omap3stalker.c

arm: omap: irq: drop omap3_intc_handle_irq()

2014-09-11 13:05:40 -07:00

board-omap3touchbook.c

arm: omap: irq: drop omap3_intc_handle_irq()

2014-09-11 13:05:40 -07:00

board-overo.c

arm: omap: irq: drop omap3_intc_handle_irq()

2014-09-11 13:05:40 -07:00

board-rx51-peripherals.c

media updates for v3.19-rc1

2014-12-11 11:49:23 -08:00

board-rx51-video.c

ARM: OMAP2+: N900: remove omapdss init for DT boot

2014-04-18 16:37:43 -07:00

board-rx51.c

arm: omap: irq: drop omap3_intc_handle_irq()

2014-09-11 13:05:40 -07:00

board-rx51.h

ARM: OMAP2+: Make board-rx51.h local

2012-09-20 15:02:27 -07:00

clkt2xxx_dpll.c

ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts

2012-11-12 19:18:51 -07:00

clkt2xxx_dpllcore.c

ARM: OMAP2+: raw read and write endian fix

2014-05-08 07:09:53 -07:00

clkt2xxx_virt_prcm_set.c

ARM: OMAP2: clock: add DT boot support for cpufreq_ck

2014-05-28 13:05:57 +03:00

clkt34xx_dpll3m2.c

omap prcm changes via Paul Walmsley <paul@pwsan.com>:

2012-11-30 08:40:31 -08:00

clkt_clksel.c

ARM: OMAP2+: clock: use driver API instead of direct memory read/write

2014-01-17 12:37:00 -08:00

clkt_dpll.c

Few fixes for the v3.17 merge window:

2014-08-09 08:23:27 -07:00

clkt_iclk.c

ARM: OMAP2+: clock/interface: remove some headers from clkt_iclk.c file

2014-07-15 14:09:24 -06:00

clock2xxx.c

ARM: OMAP2+: Use omap initcalls

2013-01-11 11:24:18 -08:00

clock2xxx.h

ARM: OMAP2: clock: remove unused apll code

2015-01-07 10:54:40 -08:00

clock3xxx.c

ARM: OMAP3: clock: add support for dpll4_set_rate_and_parent

2014-11-13 09:26:33 -07:00

clock3xxx.h

CLK: TI: add omap3 clock init file

2014-01-17 12:35:48 -08:00

clock34xx.c

ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts

2012-11-12 19:18:50 -07:00

clock34xx.h

…

clock36xx.c

ARM: OMAP2+: clock: use driver API instead of direct memory read/write

2014-01-17 12:37:00 -08:00

clock36xx.h

ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts

2012-11-12 19:18:50 -07:00

clock44xx.h

…

clock2430.c

ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts

2012-11-12 19:18:51 -07:00

clock3517.c

ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts

2012-11-12 19:18:50 -07:00

clock3517.h

…

clock_common_data.c

arm: omap2+ remove dead clock code

2015-02-02 14:23:39 -08:00

clock.c

The clock framework changes for 3.20 contain the usual driver additions,

2015-02-21 12:30:30 -08:00

clock.h

The clock framework changes for 3.20 contain the usual driver additions,

2015-02-21 12:30:30 -08:00

clockdomain.c

ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints

2013-01-29 14:59:58 -07:00

clockdomain.h

ARM: OMAP2+: Add clock domain support for dm816x

2015-01-26 09:26:32 -08:00

clockdomains2xxx_3xxx_data.c

ARM: OMAP2+: hwmod code/clockdomain data: fix 32K sync timer

2012-07-05 17:25:38 -07:00

clockdomains3xxx_data.c

ARM: OMAP3: fix iva mmu programming issues

2014-03-12 09:48:26 -07:00

clockdomains7xx_data.c

ARM: OMAP: DRA7: clockdomain: Add DRA7XX data and update header

2013-08-23 04:28:36 -06:00

clockdomains33xx_data.c

ARM: OMAP AM33xx: clockdomains: Add clockdomain data and respective operations

2012-06-18 12:08:06 -06:00

clockdomains43xx_data.c

ARM: OMAP2+: CM: AM43x clockdomain data

2013-10-13 22:48:36 -06:00

clockdomains44xx_data.c

ARM: OMAP2+: clockdomain: Fix OMAP4 ISS clk domain to support only SWSUP

2012-10-29 22:02:13 -06:00

clockdomains54xx_data.c

ARM: OMAP5: clockdomain data: Add OMAP54XX data and update the header

2013-06-08 11:56:15 -06:00

clockdomains81xx_data.c

ARM: OMAP2+: Add clock domain support for dm816x

2015-01-26 09:26:32 -08:00

clockdomains2420_data.c

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

clockdomains2430_data.c

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

cm1_7xx.h

ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions

2014-10-27 08:39:25 -07:00

cm1_44xx.h

ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions

2014-10-27 08:39:25 -07:00

cm1_54xx.h

ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions

2014-10-27 08:39:25 -07:00

cm2_7xx.h

ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions

2014-10-27 08:39:25 -07:00

cm2_44xx.h

ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions

2014-10-27 08:39:25 -07:00

cm2_54xx.h

ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions

2014-10-27 08:39:25 -07:00

cm2xxx_3xxx.h

ARM: OMAP2+: raw read and write endian fix

2014-05-08 07:09:53 -07:00

cm2xxx.c

ARM: OMAP2: CM: remove unused PLL functions

2015-01-07 14:27:39 -08:00

cm2xxx.h

ARM: OMAP2: CM: remove unused PLL functions

2015-01-07 14:27:39 -08:00

cm3xxx.c

ARM: OMAP2/3: CM: make cm_split_idlest_reg SoC calls static

2014-10-27 08:39:24 -07:00

cm3xxx.h

ARM: OMAP2/3: CM: make cm_split_idlest_reg SoC calls static

2014-10-27 08:39:24 -07:00

cm33xx.c

ARM: OMAP2+: cm33xx.c: Remove some unused functions

2015-01-07 09:53:51 -08:00

cm33xx.h

ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable

2014-10-27 08:39:24 -07:00

cm44xx.h

ARM: OMAP4: CM: move public definitions from cminst44xx.h to cm44xx.h

2014-10-27 08:39:25 -07:00

cm81xx.h

ARM: OMAP2+: Add clock domain support for dm816x

2015-01-26 09:26:32 -08:00

cm_common.c

ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable

2014-10-27 08:39:24 -07:00

cm-regbits-7xx.h

ARM: OMAP: DRA7: CM: Add minimal regbit shifts

2013-08-23 04:28:36 -06:00

cm-regbits-24xx.h

ARM: OMAP2: convert sys_ck and osc_ck to standard clock types

2014-07-02 14:26:06 +03:00

cm-regbits-33xx.h

ARM: OMAP3: PRM/CM: Cleanup unused header

2013-07-21 22:10:03 -06:00

cm-regbits-34xx.h

ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver

2014-07-06 15:51:23 -06:00

cm-regbits-44xx.h

ARM: OMAP4: PRM/CM: Cleanup unused header

2013-07-21 22:10:14 -06:00

cm-regbits-54xx.h

ARM: OMAP5: PRM/CM: Cleanup unused header

2013-07-21 22:10:25 -06:00

cm.h

ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable

2014-10-27 08:39:24 -07:00

cminst44xx.c

ARM: OMAP4: CM: make cminst direct register access functions static

2014-10-27 08:39:25 -07:00

common-board-devices.c

ARM: arm-soc: Header cleanups

2012-12-12 11:45:16 -08:00

common-board-devices.h

arm: omap2: n8x0: move i2c devices to DT

2014-09-16 14:43:11 -07:00

common.c

ARM: OMAP2+: remove DSP platform device

2014-07-15 21:01:05 -07:00

common.h

ARM: SoC non-critical fixes

2015-02-17 09:15:46 -08:00

control.c

ARM: OMAP3: Fix coding style problems in arch/arm/mach-omap2/control.c

2014-08-01 01:21:14 -07:00

control.h

ARM: SoC non-critical fixes

2015-02-17 09:15:46 -08:00

cpuidle34xx.c

cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logic

2014-11-12 21:17:27 +01:00

cpuidle44xx.c

cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logic

2014-11-12 21:17:27 +01:00

ctrl_module_wkup_44xx.h

ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local

2012-09-20 15:02:33 -07:00

devices.c

media updates for v3.19-rc1

2014-12-11 11:49:23 -08:00

devices.h

…

display.c

arm: mach-omap2: Convert pr_warning to pr_warn

2014-09-18 09:53:57 -07:00

display.h

ARM: OMAP2+: add omapdss_init_of()

2014-03-19 10:52:23 +02:00

dma.c

ARM: OMAP2+: DMA: remove requirement of irq for platform-dma driver

2014-07-21 23:32:51 -07:00

dpll3xxx.c

clk: Add rate constraints to clocks

2015-02-02 14:23:42 -08:00

dpll44xx.c

The clock framework changes for 3.20 contain the usual driver additions,

2015-02-21 12:30:30 -08:00

drm.c

ARM: OMAP2+: display: Create omapdrm device inside omap_display_init

2013-10-08 14:02:35 -07:00

dss-common.c

ARM: OMAP2+: remove pdata quirks for displays

2014-04-04 09:55:18 +03:00

dss-common.h

ARM: OMAP2+: pdata-quirks: add legacy display init for IGEPv2 board

2013-10-09 07:54:34 -07:00

fb.c

ARM: OMAP2+: display: Create omapvrfb and omapfb devices inside omap_display_init

2013-10-08 14:02:51 -07:00

gpio.c

arm-soc: soc-specific updates

2013-02-21 15:27:22 -08:00

gpmc-nand.c

ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header

2014-11-20 12:11:25 -08:00

gpmc-onenand.c

ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header

2014-11-20 12:11:25 -08:00

gpmc-smsc911x.c

ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init()

2013-11-14 10:40:36 -08:00

gpmc-smsc911x.h

ARM: OMAP2+: Make gpmc-smsc911x.h local

2012-09-20 15:03:55 -07:00

gpmc.h

ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header

2014-11-20 12:11:25 -08:00

hdq1w.c

arm: mach-omap2: Convert pr_warning to pr_warn

2014-09-18 09:53:57 -07:00

hdq1w.h

ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2

2012-10-18 16:05:55 -07:00

hsmmc.c

mmc: omap_hsmmc: remove unused slot_id parameter

2014-11-26 14:30:56 +01:00

hsmmc.h

mmc: omap_hsmmc: remove unused slot_id parameter

2014-11-26 14:30:56 +01:00

hwspinlock.c

arm-soc: soc-specific updates

2013-02-21 15:27:22 -08:00

i2c.c

arm: mach-omap2: Convert pr_warning to pr_warn

2014-09-18 09:53:57 -07:00

i2c.h

ARM: OMAP: Fix relative includes for shared i2c.h file

2012-10-31 15:37:13 -07:00

id.c

ARM: OMAP2+: Fix ti81xx devtype

2015-01-14 17:37:15 -08:00

id.h

ARM: OMAP2+: Make id.h local

2012-09-20 15:02:22 -07:00

io.c

The clock framework changes for 3.20 contain the usual driver additions,

2015-02-21 12:30:30 -08:00

iomap.h

ARM: OMAP5: Add minimal support for OMAP5430 SOC

2012-07-09 19:14:39 +05:30

Kconfig

ARM: OMAP3: Add back Kconfig option MACH_OMAP3517EVM for ASoC

2015-01-20 08:49:08 -08:00

l3_2xxx.h

ARM: OMAP2+: Make l3_2xxx.h local

2012-09-20 15:03:59 -07:00

l3_3xxx.h

ARM: OMAP2+: Make l3_3xxx.h local

2012-09-20 15:04:00 -07:00

l4_2xxx.h

ARM: OMAP2+: Make l4_2xxx.h local

2012-09-20 15:04:01 -07:00

l4_3xxx.h

ARM: OMAP2+: Make l4_3xxx.h local

2012-09-20 15:04:03 -07:00

Makefile

The clock framework changes for 3.20 contain the usual driver additions,

2015-02-21 12:30:30 -08:00

Makefile.boot

ARM: dtb: move all dtb targets to common Makefile

2012-09-20 22:58:17 -07:00

mcbsp.c

ARM: OMAP3: McBSP: do not access CM register directly

2013-10-19 10:11:51 -06:00

mmc.h

ARM: OMAP2: MMC: include mmc-omap platform header directly

2014-11-26 14:30:53 +01:00

msdi.c

arm: mach-omap2: Convert pr_warning to pr_warn

2014-09-18 09:53:57 -07:00

mux34xx.c

ARM: OMAP2+: mux: fix trivial typo in name

2013-09-18 12:02:01 -07:00

mux34xx.h

omap: mux: add AM/DM37x gpios

2013-05-08 17:07:40 -07:00

mux.c

arm: mach-omap2: Convert pr_warning to pr_warn

2014-09-18 09:53:57 -07:00

mux.h

ARM: OMAP2+: remove OMAP_PACKAGE_ZAC and OMAP_PACKAGE_ZAF

2014-02-28 15:36:34 -08:00

omap2-restart.c

ARM: OMAP2+: PRM: provide generic API for system reset

2014-10-27 08:39:26 -07:00

omap3-restart.c

ARM: OMAP2+: PRM: provide generic API for system reset

2014-10-27 08:39:26 -07:00

omap4-common.c

ARM: make of_device_ids const

2015-02-19 09:44:25 +01:00

omap4-restart.c

ARM: OMAP2+: PRM: provide generic API for system reset

2014-10-27 08:39:26 -07:00

omap4-sar-layout.h

ARM: arm-soc cleanup for 3.10

2013-05-02 09:03:55 -07:00

omap24xx.h

ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2

2012-09-12 18:06:31 -07:00

omap34xx.h

ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2

2012-09-12 18:06:31 -07:00

omap44xx.h

ARM: OMAP: Make use of available scu_a9_get_base() interface

2013-01-28 10:41:39 -07:00

omap54xx.h

ARM: DRA7: Reuse io tables and add a new .init_early

2013-08-13 11:00:35 +05:30

omap_device.c

ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM

2014-12-13 00:42:49 +01:00

omap_device.h

ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected

2013-12-10 09:39:52 -08:00

omap_hwmod_2xxx_3xxx_interconnect_data.c

ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs

2014-07-15 05:08:56 -07:00

omap_hwmod_2xxx_3xxx_ipblock_data.c

ARM: AM43xx: hwmod: add DSS hwmod data

2014-07-05 17:44:57 -06:00

omap_hwmod_2xxx_interconnect_data.c

ARM: OMAP2+: Remove legacy hwmod entries for omap2

2013-11-25 15:31:18 -08:00

omap_hwmod_2xxx_ipblock_data.c

ARM: OMAP2+: hwmod_data: fix missing OMAP_INTC_START in irq data

2013-12-25 21:41:27 -07:00

omap_hwmod_3xxx_data.c

ARM: OMAP3: Remove legacy support for am35xx-emac

2015-01-13 09:00:38 -08:00

omap_hwmod_7xx_data.c

ARM: DRA7: hwmod_data: Fix hwmod data for pcie

2015-02-26 00:02:28 -07:00

omap_hwmod_33xx_43xx_common_data.h

ARM: OMAP2+: hwmod: AM43x support

2013-10-13 22:48:46 -06:00

omap_hwmod_33xx_43xx_interconnect_data.c

ARM: AM33xx: hwmod_data: Remove legacy mailbox addrs

2014-07-15 05:08:56 -07:00

omap_hwmod_33xx_43xx_ipblock_data.c

ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driver

2014-11-26 14:30:53 +01:00

omap_hwmod_33xx_data.c

ARM: OMAP2: MMC: include mmc-omap platform header directly

2014-11-26 14:30:53 +01:00

omap_hwmod_43xx_data.c

ARM: AM43xx: hwmod: set DSS submodule parent hwmods

2015-01-20 18:12:17 -07:00

omap_hwmod_44xx_data.c

ARM: OMAP: Work around hardcoded interrupts

2015-01-17 08:56:12 -08:00

omap_hwmod_54xx_data.c

ARM: OMAP: Work around hardcoded interrupts

2015-01-17 08:56:12 -08:00

omap_hwmod_81xx_data.c

ARM: OMAP2+: Add dm816x hwmod support

2015-01-26 09:26:32 -08:00

omap_hwmod_2420_data.c

ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs

2014-07-15 05:08:56 -07:00

omap_hwmod_2430_data.c

ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driver

2014-11-26 14:30:53 +01:00

omap_hwmod_common_data.c

ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2

2012-10-18 16:05:55 -07:00

omap_hwmod_common_data.h

ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs

2014-07-15 05:08:56 -07:00

omap_hwmod_common_ipblock_data.c

ARM: AM43xx: hwmod: add DSS hwmod data

2014-07-05 17:44:57 -06:00

omap_hwmod_reset.c

ARM: omap2: include linux/errno.h in hwmod_reset

2013-02-15 13:36:47 +01:00

omap_hwmod.c

ARM: OMAP2+: hwmod: fix deassert hardreset clkdm usecounting

2015-03-01 16:24:04 -07:00

omap_hwmod.h

ARM: omap2+: omap_hwmod: Set unique lock_class_key per hwmod

2015-02-26 00:00:51 -07:00

omap_opp_data.h

Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock

2012-11-13 13:25:38 -08:00

omap_phy_internal.c

ARM: OMAP2+: Remove unused ti81xx platform init code

2015-01-14 17:21:00 -08:00

omap_twl.c

mfd: twl-core: Fix idle mode signaling for omaps when booted with device tree

2014-04-23 15:31:05 +01:00

omap-headsmp.S

ARM: omap5/dra7xx: Enable booting secondary CPU in HYP mode

2015-01-05 15:48:21 -08:00

omap-hotplug.c

ARM: OMAP2+: raw read and write endian fix

2014-05-08 07:09:53 -07:00

omap-iommu.c

ARM: omap: Don't set iommu pdata da_start and da_end fields

2014-07-29 12:39:23 +02:00

omap-mpuss-lowpower.c

ARM: OMAP4+: PM: Program CPU logic power state

2014-11-10 16:02:05 -08:00

omap-pm-noop.c

ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions

2015-01-07 09:53:51 -08:00

omap-pm.h

ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions

2015-01-07 09:53:51 -08:00

omap-secure.c

RX-51: Add support for OMAP3 ROM Random Number Generator

2013-10-08 12:02:12 -07:00

omap-secure.h

ARM: OMAP5 / DRA7: PM / wakeupgen: Enables ES2 PM mode by default

2014-09-08 11:38:41 -05:00

omap-smc.S

ARM: OMAP3: Add secure function omap_smc3() which calling instruction smc #1

2013-10-08 11:55:32 -07:00

omap-smp.c

ARM: omap5/dra7xx: Enable booting secondary CPU in HYP mode

2015-01-05 15:48:21 -08:00

omap-wakeupgen.c

ARM: OMAP5 / DRA7: Enable CPU RET on suspend

2014-09-08 11:38:43 -05:00

omap-wakeupgen.h

ARM: OMAP5 / DRA7: PM / wakeupgen: Enables ES2 PM mode by default

2014-09-08 11:38:41 -05:00

opp2xxx.h

…

opp3xxx_data.c

ARM: OMAP2+: Use omap initcalls

2013-01-11 11:24:18 -08:00

opp4xxx_data.c

ARM: OMAP2+: Use omap initcalls

2013-01-11 11:24:18 -08:00

opp2420_data.c

ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+

2012-09-12 18:06:31 -07:00

opp2430_data.c

ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+

2012-09-12 18:06:31 -07:00

opp.c

ACPI and power management updates for 3.13-rc1

2013-11-14 13:41:48 +09:00

pdata-quirks.c

ARM: OMAP2+: Fix wl12xx on dm3730-evm with mainline u-boot

2015-03-06 10:37:34 -08:00

pm24xx.c

ARM: SoC device-tree changes for 3.17

2014-08-08 11:16:58 -07:00

pm34xx.c

ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header

2014-11-20 12:11:25 -08:00

pm44xx.c

ARM: OMAP4+: PM: Centralize static dependency mapping table

2014-11-10 16:01:40 -08:00

pm-debug.c

Merge branch 'cleanup' into for-linus

2013-05-02 21:31:29 +01:00

pm.c

cpufreq: cpu0: rename driver and internals to 'cpufreq_dt'

2014-10-03 15:37:54 +02:00

pm.h

ARM: OMAP5 / DRA7: Enable CPU RET on suspend

2014-09-08 11:38:43 -05:00

pmu.c

arm: omap: specify PMUs are for ARMv7 CPUs

2015-02-06 00:13:06 -08:00

powerdomain-common.c

ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files

2014-05-15 22:35:10 -06:00

powerdomain.c

ARM: OMAP2+: voltage: Remove some unused functions

2015-01-07 09:53:51 -08:00

powerdomain.h

ARM: OMAP2+: powerdomain.c: Remove some unused functions

2015-01-07 09:53:51 -08:00

powerdomains2xxx_3xxx_data.c

ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments

2013-01-29 14:59:58 -07:00

powerdomains2xxx_3xxx_data.h

…

powerdomains2xxx_data.c

ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments

2013-01-29 14:59:58 -07:00

powerdomains3xxx_data.c

ARM: OMAP2+: Fix ti81xx class type

2015-01-14 17:37:16 -08:00

powerdomains7xx_data.c

ARM: OMAP: DRA7: powerdomain data: fix powerdomain powerstate

2014-09-08 11:22:31 -05:00

powerdomains33xx_data.c

ARM: OMAP AM33xx: powerdomains: add AM335x support

2012-06-18 12:08:06 -06:00

powerdomains43xx_data.c

ARM: OMAP2+: PM: AM43x powerdomain data

2013-10-13 22:48:25 -06:00

powerdomains44xx_data.c

…

powerdomains54xx_data.c

ARM: OMAP5: powerdomain data: fix powerdomain powerstate

2014-09-08 11:22:40 -05:00

prcm43xx.h

ARM: AM43xx: hwmod: add DSS hwmod data

2014-07-05 17:44:57 -06:00

prcm44xx.h

ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters

2013-08-23 04:28:36 -06:00

prcm_mpu7xx.h

ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters

2013-08-23 04:28:36 -06:00

prcm_mpu44xx.c

ARM: OMAP2+: raw read and write endian fix

2014-05-08 07:09:53 -07:00

prcm_mpu44xx.h

ARM: OMAP2+: PRCM: cleanup some header includes

2014-05-15 22:34:48 -06:00

prcm_mpu54xx.h

ARM: OMAP5: PRCM: Add OMAP54XX local MPU PRCM registers

2013-06-08 11:55:18 -06:00

prcm_mpu_44xx_54xx.h

ARM: OMAP4+: PRCM MPU: Move function prototypes to common header for re-use

2013-06-08 11:54:40 -06:00

prcm-common.h

ARM: OMAP: Work around hardcoded interrupts

2015-01-17 08:56:12 -08:00

prm2xxx_3xxx.c

ARM: OMAP2+: PRM: add generic API for checking hardreset status

2014-10-27 08:39:25 -07:00

prm2xxx_3xxx.h

ARM: OMAP2+: PRM: add generic API for checking hardreset status

2014-10-27 08:39:25 -07:00

prm2xxx.c

ARM: OMAP2+: PRM: provide generic API for system reset

2014-10-27 08:39:26 -07:00

prm2xxx.h

ARM: OMAP2+: PRM: provide generic API for system reset

2014-10-27 08:39:26 -07:00

prm3xxx.c

ARM: make of_device_ids const

2015-02-19 09:44:25 +01:00

prm3xxx.h

ARM: OMAP3+: PRM: remove prm_get_reset_sources declaration from headers

2015-01-07 14:27:39 -08:00

prm7xx.h

arm: dra7xx: Add hwmod data for pcie1 phy and pcie2 phy

2014-07-22 14:35:05 -06:00

prm33xx.c

ARM: OMAP2+: PRM: provide generic API for system reset

2014-10-27 08:39:26 -07:00

prm33xx.h

ARM: OMAP2+: PRM: provide generic API for system reset

2014-10-27 08:39:26 -07:00

prm44xx_54xx.h

ARM: OMAP3+: PRM: remove prm_get_reset_sources declaration from headers

2015-01-07 14:27:39 -08:00

prm44xx.c

ARM: OMAP4+: PRM: fix omap4 version of prm_save_and_clear_irqen

2015-03-01 16:58:25 -07:00

prm44xx.h

ARM: OMAP4+: PRM: Move function prototypes to common header for re-use

2013-06-08 11:02:20 -06:00

prm54xx.h

ARM: OMAP5: PRM: Add OMAP54XX register and bitfield files

2013-06-08 11:41:01 -06:00

prm_common.c

The clock framework changes for 3.20 contain the usual driver additions,

2015-02-21 12:30:30 -08:00

prm-regbits-24xx.h

ARM: OMAP2: PRM/CM: Cleanup unused header

2013-07-21 21:13:59 -06:00

prm-regbits-33xx.h

ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK

2013-08-29 19:10:59 -07:00

prm-regbits-34xx.h

ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver

2014-07-06 15:51:23 -06:00

prm-regbits-44xx.h

ARM: OMAP4: PRM/CM: Cleanup unused header

2013-07-21 22:10:14 -06:00

prm.h

ARM: OMAP3: PRM: add support for legacy iomapping init

2015-01-30 10:55:23 -08:00

prminst44xx.c

ARM: OMAP2+: PRM: add generic API for deasserting hardware reset

2014-10-27 08:39:25 -07:00

prminst44xx.h

ARM: OMAP2+: PRM: add generic API for deasserting hardware reset

2014-10-27 08:39:25 -07:00

scrm44xx.h

ARM: OMAP4: clock: Add 44xx data using common struct clk

2012-11-12 19:10:20 -07:00

scrm54xx.h

ARM: OMAP5: SCRM: Add OMAP54XX header file.

2013-06-08 11:55:44 -06:00

sdram-hynix-h8mbx00u0mer-0em.h

ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h

2012-10-17 10:18:37 -07:00

sdram-micron-mt46h32m32lf-6.h

ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h

2012-10-17 10:18:37 -07:00

sdram-nokia.c

ARM: OMAP: remove plat/clock.h

2012-10-18 16:23:20 -07:00

sdram-nokia.h

…

sdram-numonyx-m65kxxxxam.h

ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h

2012-10-17 10:18:37 -07:00

sdram-qimonda-hyb18m512160af-6.h

ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h

2012-10-17 10:18:37 -07:00

sdrc2xxx.c

ARM: OMAP2+: raw read and write endian fix

2014-05-08 07:09:53 -07:00

sdrc.c

omap prcm changes via Paul Walmsley <paul@pwsan.com>:

2012-11-30 08:40:31 -08:00

sdrc.h

ARM: OMAP2+: raw read and write endian fix

2014-05-08 07:09:53 -07:00

serial.c

ARM: OMAP: serial: remove last vestige of DTR_gpio support.

2014-11-10 09:06:44 -08:00

serial.h

ARM: OMAP2+: Fix relative includes for serial.h

2012-10-31 15:37:14 -07:00

sleep24xx.S

ARM: OMAP2xxx: PM: enter WFI via inline asm if CORE stays active

2013-02-06 13:48:14 -07:00

sleep34xx.S

omap prcm changes via Paul Walmsley <paul@pwsan.com>:

2012-11-30 08:40:31 -08:00

sleep44xx.S

ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+

2014-07-18 12:29:04 +01:00

smartreflex-class3.c

arm: mach-omap2: Convert pr_warning to pr_warn

2014-09-18 09:53:57 -07:00

soc.h

ARM: OMAP2+: Fix ti81xx class type

2015-01-14 17:37:16 -08:00

sr_device.c

arm: mach-omap2: Convert pr_warning to pr_warn

2014-09-18 09:53:57 -07:00

sram34xx.S

ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files

2012-10-21 01:01:11 -06:00

sram242x.S

ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+

2014-07-18 12:29:04 +01:00

sram243x.S

ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+

2014-07-18 12:29:04 +01:00

sram.c

ARM: OMAP4+: Remove static iotable mappings for SRAM

2014-09-18 09:47:35 -07:00

sram.h

ARM: OMAP4+: Remove static iotable mappings for SRAM

2014-09-18 09:47:35 -07:00

ti81xx-restart.c

ARM: OMAP2+: Fix reboot for 81xx

2015-01-14 17:37:16 -08:00

ti81xx.h

ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code

2012-11-08 12:33:07 -07:00

timer.c

ARM: SoC non-critical fixes

2015-02-17 09:15:46 -08:00

twl-common.c

ARM: OMAP: Work around hardcoded interrupts

2015-01-17 08:56:12 -08:00

twl-common.h

ARM: OMAP2+: twl-common: Allow boards to customize the twl4030 audio setup

2013-01-22 10:34:50 +01:00

usb-host.c

usb: phy: rename <linux/usb/usb_phy_gen_xceiv.h> to <linux/usb/usb_phy_generic.h>

2014-04-21 14:07:24 -05:00

usb-musb.c

ARM: OMAP2+: Remove unused ti81xx platform init code

2015-01-14 17:21:00 -08:00

usb-tusb6010.c

ARM: omap2+: usb-tusb6010.c: Cleaning up variable is set more than once

2014-07-07 04:52:31 -07:00

usb.h

ARM: OMAP2+: Remove unused ti81xx platform init code

2015-01-14 17:21:00 -08:00

vc3xxx_data.c

ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains

2012-11-05 15:08:22 -08:00

vc44xx_data.c

ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains

2012-11-05 15:08:22 -08:00

vc.c

arm: mach-omap2: Convert pr_warning to pr_warn

2014-09-18 09:53:57 -07:00

vc.h

ARM: OMAP3: Fix idle mode signaling for sys_clkreq and sys_off_mode

2014-05-06 13:48:35 -07:00

voltage.c

ARM: OMAP2+: voltage: Remove some unused functions

2015-01-07 09:53:51 -08:00

voltage.h

ARM: OMAP2+: voltage: Remove some unused functions

2015-01-07 09:53:51 -08:00

voltagedomains2xxx_data.c

…

voltagedomains3xxx_data.c

ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains

2012-11-05 15:08:22 -08:00

voltagedomains44xx_data.c

Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock

2012-11-13 13:25:38 -08:00

voltagedomains54xx_data.c

ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data

2013-06-25 17:11:06 -07:00

vp3xxx_data.c

ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains

2012-11-05 15:08:22 -08:00

vp44xx_data.c

ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains

2012-11-05 15:08:22 -08:00

vp.c

OMAP voltage layer updates towards supporting auto-retention/auto-off

2012-11-06 17:06:37 -08:00

vp.h

ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains

2012-11-05 15:08:22 -08:00

wd_timer.c

arm: mach-omap2: Convert pr_warning to pr_warn

2014-09-18 09:53:57 -07:00

wd_timer.h

ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2

2012-10-18 16:05:55 -07:00