dc1f12b916
Convert Xilinx watchdog bindings to DT schema format using json-schema Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220818150637.815-1-srinivas.neeli@xilinx.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
69 lines
1.7 KiB
YAML
69 lines
1.7 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/watchdog/xlnx,xps-timebase-wdt.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Xilinx AXI/PLB softcore and window Watchdog Timer
|
|
|
|
maintainers:
|
|
- Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
|
|
- Srinivas Neeli <srinivas.neeli@xilinx.com>
|
|
|
|
description:
|
|
The Timebase watchdog timer(WDT) is a free-running 32 bit counter.
|
|
WDT uses a dual-expiration architecture. After one expiration of
|
|
the timeout interval, an interrupt is generated and the WDT state
|
|
bit is set to one in the status register. If the state bit is not
|
|
cleared (by writing a one to the state bit) before the next
|
|
expiration of the timeout interval, a WDT reset is generated.
|
|
|
|
allOf:
|
|
- $ref: watchdog.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- xlnx,xps-timebase-wdt-1.01.a
|
|
- xlnx,xps-timebase-wdt-1.00.a
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
clock-frequency:
|
|
description: Frequency of clock in Hz
|
|
|
|
xlnx,wdt-interval:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: Watchdog timeout interval
|
|
minimum: 8
|
|
maximum: 32
|
|
|
|
xlnx,wdt-enable-once:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1]
|
|
description: If watchdog is configured as enable once,
|
|
then the watchdog cannot be disabled after
|
|
it has been enabled.
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
watchdog@40100000 {
|
|
compatible = "xlnx,xps-timebase-wdt-1.00.a";
|
|
reg = <0x40100000 0x1000>;
|
|
clock-frequency = <50000000>;
|
|
clocks = <&clkc 15>;
|
|
xlnx,wdt-enable-once = <0x0>;
|
|
xlnx,wdt-interval = <0x1b>;
|
|
};
|
|
...
|