Michael Ellerman cdbd3865ac Use dcr_host_t.base in dcr_unmap() ...

With the base stored in dcr_host_t, there's no need for callers to pass
the dcr_n into dcr_unmap(). In fact this removes the possibility of them
passing the incorrect value, which would then be iounmap()'ed.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

2007-10-15 14:29:49 -04:00

..

qe_lib

[POWERPC] QE: pario - support for MPC85xx layout

2007-10-08 08:39:01 -05:00

axonram.c

missed bio_endio() in axonram

2007-10-11 23:04:25 -07:00

commproc.c

[POWERPC] cpm: Describe multi-user ram in its own device node.

2007-10-04 15:47:05 -05:00

commproc.h

[POWERPC] 8xx: Infrastructure code cleanup.

2007-10-03 20:36:35 -05:00

cpm2_common.c

[POWERPC] cpm: Describe multi-user ram in its own device node.

2007-10-04 15:47:05 -05:00

cpm2_pic.c

[POWERPC] cpm2: Infrastructure code cleanup.

2007-10-04 11:02:04 -05:00

cpm2_pic.h

[POWERPC] cpm2: CPM2 interrupt controller fix

2007-02-07 14:03:20 +11:00

cpm_common.c

[POWERPC] cpm: Describe multi-user ram in its own device node.

2007-10-04 15:47:05 -05:00

dart_iommu.c

[POWERPC] Fix section mismatch in dart_iommu.c

2007-08-17 11:02:06 +10:00

dart.h

[POWERPC] Use 4kB iommu pages even on 64kB-page systems

2006-11-01 14:52:48 +11:00

dcr-low.S

[POWERPC] Generic DCR infrastructure

2006-12-04 16:08:25 +11:00

dcr.c

Use dcr_host_t.base in dcr_unmap()

2007-10-15 14:29:49 -04:00

fsl_pci.c

[POWERPC] FSL: Access PCIe LTSSM register with correct size

2007-10-08 08:38:37 -05:00

fsl_pci.h

[POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected

2007-07-23 10:27:08 -05:00

fsl_soc.c

[POWERPC] spi: Support non-QE processors

2007-10-08 09:05:30 -05:00

fsl_soc.h

[POWERPC] 85xx/86xx: refactor RSTCR reset code

2007-10-08 08:38:47 -05:00

grackle.c

[POWERPC] Make endianess of cfg_addr for indirect pci ops runtime

2007-07-23 22:29:09 -05:00

i8259.c

[POWERPC] Add an optional device_node pointer to the irq_host

2007-09-14 01:33:20 +10:00

indirect_pci.c

[POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci

2007-10-12 14:05:17 +10:00

ipic.c

[POWERPC] Add an optional device_node pointer to the irq_host

2007-09-14 01:33:20 +10:00

ipic.h

[POWERPC] Add an optional device_node pointer to the irq_host

2007-09-14 01:33:20 +10:00

Makefile

[POWERPC] Don't build arch/powerpc/sysdev/dcr.c for ARCH=ppc kernels

2007-10-10 09:14:35 -06:00

micropatch.c

[POWERPC] 8xx: powerpc port of core CPM PIC

2007-02-07 14:03:17 +11:00

mmio_nvram.c

[POWERPC] Fix cell's mmio nvram to properly parse device tree

2007-01-22 21:27:35 +11:00

mpc8xx_pic.c

[POWERPC] 8xx: Infrastructure code cleanup.

2007-10-03 20:36:35 -05:00

mpc8xx_pic.h

[POWERPC] 8xx: mpc885ads pcmcia support

2007-07-10 00:33:51 -05:00

mpic_msi.c

[POWERPC] Fix section mismatch in PCI code

2007-09-19 15:25:34 +10:00

mpic_u3msi.c

[POWERPC] Inline u3msi_compose_msi_msg()

2007-10-03 09:11:42 +10:00

mpic.c

Add dcr_host_t.base in dcr_read()/dcr_write()

2007-10-15 14:29:49 -04:00

mpic.h

[POWERPC] Support setting affinity for U3/U4 MSI sources

2007-09-22 14:49:22 +10:00

mv64x60_dev.c

[WATCHDOG] mv64x60_wdt: Add arch/powerpc platform support

2007-07-24 21:16:02 +00:00

mv64x60_pci.c

[POWERPC] Make endianess of cfg_addr for indirect pci ops runtime

2007-07-23 22:29:09 -05:00

mv64x60_pic.c

[POWERPC] Provide a default irq_host match, which matches on an exact of_node

2007-09-14 01:33:20 +10:00

mv64x60_udbg.c

[POWERPC] Add Marvell mv64x60 udbg putc/getc functions

2007-09-22 14:49:21 +10:00

mv64x60.h

[POWERPC] Add Marvell mv64x60 udbg putc/getc functions

2007-09-22 14:49:21 +10:00

pmi.c

[POWERPC] Move of_platform_driver initialisations: arch/powerpc

2007-10-11 20:40:49 +10:00

rtc_cmos_setup.c

[POWERPC] Add interrupt resource for RTC CMOS driver

2007-08-17 13:18:58 -05:00

tsi108_dev.c

[POWERPC] Fix problems with device tree representation of TSI-1xx bridges

2007-06-14 22:30:17 +10:00

tsi108_pci.c

[POWERPC] Provide a default irq_host match, which matches on an exact of_node

2007-09-14 01:33:20 +10:00

uic.c

[POWERPC] Provide a default irq_host match, which matches on an exact of_node

2007-09-14 01:33:20 +10:00

xilinx_intc.c

[POWERPC] Virtex: add xilinx interrupt controller driver

2007-10-03 07:23:14 -05:00