4da722ca19
Pretty much any node can have a status property, so it doesn't need to be in examples. Converted with the following command and removed examples with SoC and board specific splits: git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d' Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
29 lines
1.0 KiB
Plaintext
29 lines
1.0 KiB
Plaintext
Allwinner sun4i A10 musb DRC/OTG controller
|
|
-------------------------------------------
|
|
|
|
Required properties:
|
|
- compatible : "allwinner,sun4i-a10-musb", "allwinner,sun6i-a31-musb",
|
|
"allwinner,sun8i-a33-musb" or "allwinner,sun8i-h3-musb"
|
|
- reg : mmio address range of the musb controller
|
|
- clocks : clock specifier for the musb controller ahb gate clock
|
|
- reset : reset specifier for the ahb reset (A31 and newer only)
|
|
- interrupts : interrupt to which the musb controller is connected
|
|
- interrupt-names : must be "mc"
|
|
- phys : phy specifier for the otg phy
|
|
- phy-names : must be "usb"
|
|
- dr_mode : Dual-Role mode must be "host" or "otg"
|
|
- extcon : extcon specifier for the otg phy
|
|
|
|
Example:
|
|
|
|
usb_otg: usb@01c13000 {
|
|
compatible = "allwinner,sun4i-a10-musb";
|
|
reg = <0x01c13000 0x0400>;
|
|
clocks = <&ahb_gates 0>;
|
|
interrupts = <38>;
|
|
interrupt-names = "mc";
|
|
phys = <&usbphy 0>;
|
|
phy-names = "usb";
|
|
extcon = <&usbphy 0>;
|
|
};
|