iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/net/wireless/ath/ath9k
History
Janusz Dziedzic a64d876ef7 ath9k: MCC, add NOA also in case of an AP 
In case of MCC and AP interface, add also NOA attr
that will inform stations about absence of an AP.
There is a chance that some stations will handle
this NOA attr correctly and will know exactly when
AP is present/absent.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-12-08 16:50:58 +02:00
..
ahb.c
ath9k: Add HW IDs for QCA956x
2015-01-15 14:24:57 +02:00
ani.c
ath9k: use one shot read in ath9k_hw_update_mibstats
2015-03-30 11:31:31 +03:00
ani.h
ath9k_hw: tweak noise immunity thresholds for older chipsets
2014-03-03 15:35:55 -05:00
antenna.c
ath9k: add support for reporting per-chain signal strength
2013-12-18 15:23:19 -05:00
ar953x_initvals.h
ath9k: Update QCA953x initvals
2015-01-29 10:33:20 +02:00
ar955x_1p0_initvals.h
ath9k: Update AR955x initvals
2015-01-29 10:33:21 +02:00
ar956x_initvals.h
ath9k: Add initvals for QCA956x
2015-01-15 14:24:59 +02:00
ar5008_initvals.h
…
ar5008_phy.c
ath9k: split ar5008_hw_spur_mitigate and reuse common code in ar9002_hw_spur_mitigate.
2015-05-26 14:02:45 +03:00
ar9001_initvals.h
…
ar9002_calib.c
ath9k: ar9271_hw_pa_cal: use REG_READ_ARRAY
2015-03-30 11:31:30 +03:00
ar9002_hw.c
ath9k: Register supported HW hang checks
2014-01-03 15:36:57 -05:00
ar9002_initvals.h
…
ar9002_mac.c
ath9k: add TPC capability to TX descriptor path
2014-11-25 14:09:56 -05:00
ar9002_phy.c
ath9k: split ar5008_hw_spur_mitigate and reuse common code in ar9002_hw_spur_mitigate.
2015-05-26 14:02:45 +03:00
ar9002_phy.h
ath9k: Fix NF CCA limits for AR9287 and AR9227
2015-10-14 14:05:00 +03:00
ar9003_2p2_initvals.h
ath9k_hw: update ar9300 initvals
2014-04-30 12:13:15 -04:00
ar9003_aic.c
ath9k: Handle MCI_STATE_AIC_CAL
2015-03-20 08:28:11 +02:00
ar9003_aic.h
ath9k: Handle MCI_STATE_AIC_CAL
2015-03-20 08:28:11 +02:00
ar9003_buffalo_initvals.h
…
ar9003_calib.c
ath9k: enable hw manual peak calibration for QCA9561
2015-09-29 10:34:09 +03:00
ar9003_eeprom.c
ath9k: Add QCA956x HW support
2015-01-15 14:25:03 +02:00
ar9003_eeprom.h
ath9k: Update BaseExtension_1 eeprom structure
2013-12-18 15:23:44 -05:00
ar9003_hw.c
ath9k: rename ini_modes_rxgain_5g_xlna to ini_modes_rxgain_xlna
2015-10-14 14:15:55 +03:00
ar9003_mac.c
ath9k: add TPC capability to TX descriptor path
2014-11-25 14:09:56 -05:00
ar9003_mac.h
…
ar9003_mci.c
ath9k: Start AIC calibration during MCI reset
2015-03-20 08:28:14 +02:00
ar9003_mci.h
ath9k: Fix GPM initialization
2015-03-03 14:55:24 +02:00
ar9003_paprd.c
…
ar9003_phy.c
ath9k: fix QCA9561 XLNA rxgain initial
2015-10-14 14:15:57 +03:00
ar9003_phy.h
ath9k: Fix register definitions for QCA956x
2015-07-21 18:03:02 +03:00
ar9003_rtt.c
ath9k: Fix RTT chainmask usage
2015-03-13 15:19:36 +02:00
ar9003_rtt.h
ath9k_hw: make support for PC-OEM cards optional
2014-10-27 14:16:18 -04:00
ar9003_wow.c
ath9k: Restart TSF2 timers on wakeup
2015-02-26 14:58:46 +02:00
ar9330_1p1_initvals.h
ath9k_hw: update ar9300 initvals
2014-04-30 12:13:15 -04:00
ar9330_1p2_initvals.h
ath9k_hw: update ar9300 initvals
2014-04-30 12:13:15 -04:00
ar9340_initvals.h
ath9k_hw: fix worse EVM for 11b rates
2014-04-30 12:13:16 -04:00
ar9462_2p0_initvals.h
ath9k: Fix ETSI compliance for AR9462 2.0
2014-02-20 15:53:20 -05:00
ar9462_2p1_initvals.h
…
ar9485_initvals.h
ath9k: Identify duplicate AR9485 initvals
2013-12-09 15:37:59 -05:00
ar9565_1p0_initvals.h
ath9k: Identify duplicate AR9565 v1.0 initvals
2013-12-09 15:38:00 -05:00
ar9565_1p1_initvals.h
…
ar9580_1p0_initvals.h
ath9k: Update AR9580 initvals
2014-10-27 14:16:17 -04:00
ath9k.h
ath9k: Add support for OCB mode
2015-09-29 10:39:22 +03:00
beacon.c
ath9k: MCC, add NOA also in case of an AP
2015-12-08 16:50:58 +02:00
btcoex.c
ath9k: Fix wlan-active gpio for the AR9003 family
2015-03-03 15:46:56 +02:00
btcoex.h
ath9k: Handle MCI_STATE_AIC_CAL_SINGLE
2015-03-20 08:27:20 +02:00
calib.c
ath9k: ath9k_hw_loadnf: use REG_RMW
2015-03-30 11:31:32 +03:00
calib.h
ath9k: restart hardware after noise floor calibration failure
2014-10-27 14:16:18 -04:00
channel.c
ath9k: P2P_CLIENT, get/set NOA correctly
2015-12-08 16:50:55 +02:00
common-beacon.c
Revert "ath9k: Calculate sleep duration"
2014-09-11 14:17:20 -04:00
common-beacon.h
ath9k: move ath9k_beacon_config_ap common
2014-03-17 13:13:08 -04:00
common-debug.c
ath9k: fix phyerror codes
2015-10-28 20:57:13 +02:00
common-debug.h
ath9k: move phy_err to ath9k_cmn_debug_phy_err
2014-05-13 15:56:42 -04:00
common-init.c
ath9k: move ath9k_reload_chainmask_settings to common
2014-02-28 14:33:16 -05:00
common-init.h
ath9k: move ath9k_reload_chainmask_settings to common
2014-02-28 14:33:16 -05:00
common-spectral.c
ath9k: Mix the received FFT bins to the random pool
2015-05-09 16:46:18 +03:00
common-spectral.h
ath9k: Move processing of FFT frames to different functions
2015-05-09 16:46:11 +03:00
common.c
Merge commit '4e6ce4dc7ce71d0886908d55129d5d6482a27ff9' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-11-19 15:38:48 -05:00
common.h
ath9k: fix tracking of enabled AP beacons
2015-03-16 08:34:36 +02:00
debug_sta.c
ath9k: fix build with CONFIG_ATH9K_STATION_STATISTICS=y
2015-08-07 11:21:06 +03:00
debug.c
ath9k: Add support for OCB mode
2015-09-29 10:39:22 +03:00
debug.h
ath9k: make DMA stop related messages debug-only
2015-07-21 16:56:41 +03:00
dfs_debug.c
…
dfs_debug.h
ath9k: simplify DFS pulse interval debug printing
2014-05-29 13:08:10 -04:00
dfs.c
ath9k: DFS - add pulse chirp detection for FCC
2015-07-11 19:51:53 +03:00
dfs.h
…
dynack.c
ath9k: fix getting tx duration for dynack
2014-09-30 13:17:48 -04:00
dynack.h
ath9k: add dynamic ACK timeout estimation
2014-09-16 16:18:30 -04:00
eeprom_4k.c
ath9k: Simplify and fix eeprom endianness swapping
2015-12-08 16:50:18 +02:00
eeprom_9287.c
ath9k: Simplify and fix eeprom endianness swapping
2015-12-08 16:50:18 +02:00
eeprom_def.c
ath9k: Simplify and fix eeprom endianness swapping
2015-12-08 16:50:18 +02:00
eeprom.c
ath9k: Simplify and fix eeprom endianness swapping
2015-12-08 16:50:18 +02:00
eeprom.h
ath9k: Simplify and fix eeprom endianness swapping
2015-12-08 16:50:18 +02:00
gpio.c
ath9k: add extra GPIO led support
2015-04-07 20:15:01 +03:00
hif_usb.c
ath9k_htc: introduce support for different fw versions
2015-09-18 10:40:14 +03:00
hif_usb.h
ath9k_htc: introduce support for different fw versions
2015-09-18 10:40:14 +03:00
htc_drv_beacon.c
ath9k_htc: add support of channel switch
2015-06-15 12:44:34 +03:00
htc_drv_debug.c
wireless: use %*pb[l] to print bitmaps including cpumasks and nodemasks
2015-02-13 21:21:38 -08:00
htc_drv_gpio.c
ath9k and ath9k_htc: rename variable "led_blink"
2015-01-27 20:06:27 +02:00
htc_drv_init.c
ath9k: Add support for OCB mode
2015-09-29 10:39:22 +03:00
htc_drv_main.c
mac80211: allow to transmit A-MSDU within A-MPDU
2015-09-22 15:21:23 +02:00
htc_drv_txrx.c
mac80211: remove support for IFF_PROMISC
2015-04-24 11:14:13 +02:00
htc_hst.c
ath9k_htc: check for underflow in ath9k_htc_rx_msg()
2015-11-26 14:05:17 +02:00
htc_hst.h
ath9k_htc: catch fw panic pattern
2014-02-12 15:36:03 -05:00
htc.h
ath9k_htc: add support of channel switch
2015-06-15 12:44:34 +03:00
hw-ops.h
ath9k: Register private AIC ops
2015-03-20 08:27:17 +02:00
hw.c
ath9k: add debug messages to aggr/chanctx funcs
2015-12-08 16:50:31 +02:00
hw.h
driver core update for 4.4-rc1
2015-11-04 21:50:37 -08:00
init.c
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
2015-10-20 06:08:27 -07:00
Kconfig
Revert "ath9k: export HW random number generator"
2015-07-31 10:25:16 +03:00
link.c
ath9k: match wait_for_completion_timeout return type
2015-08-13 15:27:12 +03:00
mac.c
ath9k: Add QCA956x HW support
2015-01-15 14:25:03 +02:00
mac.h
ath9k: fix phyerror codes
2015-10-28 20:57:13 +02:00
main.c
Major changes:
2015-10-12 19:39:18 -07:00
Makefile
Revert "ath9k: export HW random number generator"
2015-07-31 10:25:16 +03:00
mci.c
ath9k: Fix GPM initialization
2015-03-03 14:55:24 +02:00
mci.h
…
pci.c
ath9k: Check WOW triggers properly
2015-02-03 15:31:04 +02:00
phy.h
…
recv.c
ath9k: Add support for OCB mode
2015-09-29 10:39:22 +03:00
reg_aic.h
ath9k: Add register definitions for AIC
2015-03-20 08:27:19 +02:00
reg_mci.h
ath9k: Mute BT properly
2015-03-03 14:55:27 +02:00
reg_wow.h
ath9k: Clear additional WoW events
2015-02-26 14:58:43 +02:00
reg.h
ath9k: add extra GPIO led support
2015-04-07 20:15:01 +03:00
tx99.c
ath9k: Unify reset API
2014-10-27 14:16:14 -04:00
wmi.c
ath9k_htc: wmi: match wait_for_completion_timeout return type
2015-08-13 15:26:19 +03:00
wmi.h
ath9k_htc: check seq number instead of cmd id for timeout
2015-04-07 20:07:44 +03:00
wow.c
ath9k: Register correct WOW details with mac80211
2015-02-06 08:39:21 +02:00
xmit.c
ath9k: queue null frames in case of MCC
2015-12-08 16:50:38 +02:00