iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/net/phy
History
Alexandru Ardelean b422d1b6f7 net: phy: adin: add support MDI/MDIX/Auto-MDI selection 
The ADIN PHYs support automatic MDI/MDIX negotiation. By default this is
disabled, so this is enabled at `config_init`.

This is controlled via the PHY Control 1 register.
The supported modes are:
  1. Manual MDI
  2. Manual MDIX
  3. Auto MDIX - prefer MDIX
  4. Auto MDIX - prefer MDI

The phydev mdix & mdix_ctrl fields include modes 3 & 4 into a single
auto-mode. So, the default mode this driver enables is 4 when Auto-MDI mode
is used.

When detecting MDI/MDIX mode, a combination of the PHY Control 1 register
and PHY Status 1 register is used to determine the correct MDI/MDIX mode.

If Auto-MDI mode is not set, then the manual MDI/MDIX mode is returned.
If Auto-MDI mode is set, then MDIX mode is returned differs from the
preferred MDI/MDIX mode.
This covers all cases where:
  1. MDI preferred  & Pair01Swapped   == MDIX
  2. MDIX preferred & Pair01Swapped   == MDI
  3. MDI preferred  & ! Pair01Swapped == MDIX
  4. MDIX preferred & ! Pair01Swapped == MDI

The preferred MDI/MDIX mode is not configured via SW, but can be configured
via HW pins. Note that the `Pair01Swapped` is the Green-Yellow physical
pairs.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-16 11:56:26 -07:00
..
adin.c
net: phy: adin: add support MDI/MDIX/Auto-MDI selection
2019-08-16 11:56:26 -07:00
amd.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
aquantia_hwmon.c
net: phy: aquantia: add hwmon support
2019-02-25 14:16:22 -08:00
aquantia_main.c
net: phy: aquantia: add USXGMII support and warn if XGMII mode is set
2019-05-24 13:39:34 -07:00
aquantia.h
net: phy: aquantia: add hwmon support
2019-02-25 14:16:22 -08:00
at803x.c
net: mdio: rename mdio_device reset to reset_gpio
2019-04-18 17:42:54 -07:00
ax88796b.c
net: phy: rename Asix Electronics PHY driver
2019-06-09 13:24:17 -07:00
bcm7xxx.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
bcm63xx.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
bcm87xx.c
net: phy: bcm87xx: improve bcm87xx_config_init and feature detection
2019-05-26 21:56:41 -07:00
bcm-cygnus.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
bcm-phy-lib.c
net: phy: Prepare for moving Omega out of bcm7xxx
2019-03-21 13:41:26 -07:00
bcm-phy-lib.h
net: phy: Prepare for moving Omega out of bcm7xxx
2019-03-21 13:41:26 -07:00
broadcom.c
net: phy: broadcom: Add genphy_suspend and genphy_resume for BCM5464
2019-06-09 20:05:19 -07:00
cicada.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
cortina.c
net: phy: remove gen10g_no_soft_reset
2019-03-03 21:47:57 -08:00
davicom.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
dp83tc811.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
dp83640_reg.h
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 11:10:55 +01:00
dp83640.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
dp83822.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
dp83848.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
dp83867.c
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
2019-05-31 10:49:43 -07:00
et1011c.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
fixed_phy.c
net: phy: fixed_phy: print gpio error only if gpio node is present
2019-07-30 09:54:45 -07:00
icplus.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
intel-xway.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
Kconfig
net: phy: adin: add support for Analog Devices PHYs
2019-08-16 11:56:25 -07:00
lxt.c
net: phy: lxt: Add suspend/resume support to LXT971 and LXT973.
2019-05-23 09:19:21 -07:00
Makefile
net: phy: adin: add support for Analog Devices PHYs
2019-08-16 11:56:25 -07:00
marvell10g.c
net: phy: marvell10g: report if the PHY fails to boot firmware
2019-05-29 14:25:10 -07:00
marvell.c
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
2019-05-02 22:14:21 -04:00
mdio_bus.c
net: mdio: rename mdio_device reset to reset_gpio
2019-04-18 17:42:54 -07:00
mdio_device.c
net: mdio: rename mdio_device reset to reset_gpio
2019-04-18 17:42:54 -07:00
mdio-aspeed.c
net: phy: Add mdio-aspeed
2019-08-02 17:56:28 -07:00
mdio-bcm-iproc.c
net: phy: Remove redundent License text when SPDX header is present
2019-01-22 20:53:08 -08:00
mdio-bcm-unimac.c
net: phy: mdio-bcm-unimac: remove redundant !timeout check
2019-03-27 14:27:30 -07:00
mdio-bitbang.c
net: phy: Fixup GPLv2 SPDX tags based on license text
2019-01-22 20:58:40 -08:00
mdio-boardinfo.c
net: phy: Convert some PHY and MDIO driver files to SPDX headers
2019-01-22 20:53:08 -08:00
mdio-boardinfo.h
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 11:10:55 +01:00
mdio-cavium.c
net: phy: Add SDPX tag based on COPYING file
2019-01-22 20:59:18 -08:00
mdio-cavium.h
net: mdio-octeon: Fix Kconfig warnings and build errors
2019-08-06 14:11:08 -07:00
mdio-gpio.c
net: phy: Fixup GPLv2 SPDX tags based on license text
2019-01-22 20:58:40 -08:00
mdio-hisi-femac.c
net: phy: Fixup GPLv2+ SPDX tags based on license text
2019-01-22 20:57:03 -08:00
mdio-i2c.c
net: phy: Convert some PHY and MDIO driver files to SPDX headers
2019-01-22 20:53:08 -08:00
mdio-i2c.h
net: phy: Convert some PHY and MDIO driver files to SPDX headers
2019-01-22 20:53:08 -08:00
mdio-moxart.c
net: phy: Fixup GPLv2 SPDX tags based on license text
2019-01-22 20:58:40 -08:00
mdio-mscc-miim.c
drivers: net: Remove device_node checks with of_mdiobus_register()
2018-05-16 14:20:36 -04:00
mdio-mux-bcm-iproc.c
net: phy: Convert some PHY and MDIO driver files to SPDX headers
2019-01-22 20:53:08 -08:00
mdio-mux-gpio.c
net: phy: Add SDPX tag based on COPYING file
2019-01-22 20:59:18 -08:00
mdio-mux-meson-g12a.c
net: meson: fixup g12a glue ephy id
2019-05-13 09:12:19 -07:00
mdio-mux-mmioreg.c
net: phy: Convert some PHY and MDIO driver files to SPDX headers
2019-01-22 20:53:08 -08:00
mdio-mux-multiplexer.c
drivers: net: phy: mdio-mux: Add support for Generic Mux controls
2019-02-27 12:52:20 -08:00
mdio-mux.c
net: phy: Add SDPX tag based on COPYING file
2019-01-22 20:59:18 -08:00
mdio-octeon.c
net: phy: Add SDPX tag based on COPYING file
2019-01-22 20:59:18 -08:00
mdio-sun4i.c
net: phy: Fixup GPLv2 SPDX tags based on license text
2019-01-22 20:58:40 -08:00
mdio-thunder.c
net: phy: Add SDPX tag based on COPYING file
2019-01-22 20:59:18 -08:00
mdio-xgene.c
net: phy: xgene: use devm_platform_ioremap_resource() to simplify code
2019-08-01 13:10:34 -04:00
mdio-xgene.h
net: phy: Convert some PHY and MDIO driver files to SPDX headers
2019-01-22 20:53:08 -08:00
meson-gxl.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
micrel.c
net: phy: micrel: make sure the factory test bit is cleared
2019-04-29 23:17:21 -04:00
microchip_t1.c
net: phy: remove flag PHY_HAS_INTERRUPT from driver configs
2018-11-11 09:36:56 -08:00
microchip.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
mscc.c
net: phy: mscc: initialize stats array
2019-07-24 15:25:44 -07:00
national.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
nxp-tja11xx.c
net: phy: tja11xx: Switch to HWMON_CHANNEL_INFO()
2019-05-29 22:02:18 -07:00
phy_device.c
net: phy: read MII_CTRL1000 in genphy_read_status only if needed
2019-08-15 11:41:49 -07:00
phy_led_triggers.c
net: phy: phy_led_triggers: Fix a possible null-pointer dereference in phy_led_trigger_change_speed()
2019-07-31 18:56:11 -04:00
phy-c45.c
treewide: Add SPDX license identifier for missed files
2019-05-21 10:50:45 +02:00
phy-core.c
net: phy: add phy_speed_down_core and phy_resolve_min_speed
2019-08-13 17:14:06 -07:00
phy.c
net: phy: let phy_speed_down/up support speeds >1Gbps
2019-08-13 17:14:06 -07:00
phylink.c
net: phylink: Fix flow control for fixed-link
2019-07-27 14:27:51 -07:00
qsemi.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
realtek.c
net: phy: realtek: add support for EEE registers on integrated PHY's
2019-08-15 11:48:30 -07:00
rockchip.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
sfp-bus.c
net: sfp: remove sfp-bus use of netdevs
2019-05-31 12:37:46 -07:00
sfp.c
net: phy: sfp: hwmon: Fix scaling of RX power
2019-07-21 11:51:50 -07:00
sfp.h
net: sfp: do not probe SFP module before we're attached
2019-02-08 15:11:25 -08:00
smsc.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
spi_ks8995.c
spi: Micrel eth switch: declare missing of table
2019-04-23 10:44:44 -07:00
ste10Xp.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
swphy.c
net: phy: swphy: emulate register MII_ESTATUS
2019-08-15 11:43:48 -07:00
swphy.h
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 11:10:55 +01:00
teranetics.c
net: phy: remove gen10g_no_soft_reset
2019-03-03 21:47:57 -08:00
uPD60620.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
vitesse.c
net: phy: vitesse: Remove support for VSC8514.
2019-04-23 10:47:58 -07:00
xilinx_gmii2rgmii.c
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
2019-02-20 00:34:07 -08:00