4da722ca19
Pretty much any node can have a status property, so it doesn't need to be in examples. Converted with the following command and removed examples with SoC and board specific splits: git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d' Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
46 lines
1.4 KiB
Plaintext
46 lines
1.4 KiB
Plaintext
ZTE ZX296702 I2S controller
|
|
|
|
Required properties:
|
|
- compatible : Must be one of:
|
|
"zte,zx296718-i2s", "zte,zx296702-i2s"
|
|
"zte,zx296702-i2s"
|
|
- reg : Must contain I2S core's registers location and length
|
|
- clocks : Pairs of phandle and specifier referencing the controller's clocks.
|
|
- clock-names: "wclk" for the wclk, "pclk" for the pclk to the I2S interface.
|
|
- dmas: Pairs of phandle and specifier for the DMA channel that is used by
|
|
the core. The core expects two dma channels for transmit.
|
|
- dma-names : Must be "tx" and "rx"
|
|
|
|
For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties
|
|
please check:
|
|
* resource-names.txt
|
|
* clock/clock-bindings.txt
|
|
* dma/dma.txt
|
|
|
|
Example:
|
|
i2s0: i2s@b005000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "zte,zx296718-i2s", "zte,zx296702-i2s";
|
|
reg = <0x0b005000 0x1000>;
|
|
clocks = <&audiocrm AUDIO_I2S0_WCLK>, <&audiocrm AUDIO_I2S0_PCLK>;
|
|
clock-names = "wclk", "pclk";
|
|
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&dma 5>, <&dma 6>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,name = "zx296702_snd";
|
|
simple-audio-card,format = "left_j";
|
|
simple-audio-card,bitclock-master = <&sndcodec>;
|
|
simple-audio-card,frame-master = <&sndcodec>;
|
|
sndcpu: simple-audio-card,cpu {
|
|
sound-dai = <&i2s0>;
|
|
};
|
|
|
|
sndcodec: simple-audio-card,codec {
|
|
sound-dai = <&acodec>;
|
|
};
|
|
};
|