linux/drivers/usb
Martin Geleynse b760dac290 USB: ftdi: support NDI devices
It enhances the driver for FTDI-based USB serial adapters to recognize and
support Northern Digital Inc (NDI) measurement equipment. NDI has been
providing this patch for various kernel flavors for several years and we would
like to see these changes built in to the driver so that our equipement works
without the need for customers to patch the kernel themselves.

The patch makes small modifications to 2 files: ./drivers/usb/serial/ftdi_sio.c
and ./drivers/usb/serial/ftdi_sio.h. It accomplishes 3 things:

1. Define the VID and PIDs to allow the driver to recognize the NDI devices.
2. Map the 19200 baud rate setting to our higher baud rate of 1.2Mb
   We would have chosen to map 38400 to the higher rate, similar to what
   several other vendors have done, but some of our legacy customers actually
   use 38400, therefore we remap 19200 to the higher rate.
3. We set the default transmit latency in the FTDI chip to 1ms for our devices.
   Our devices are typically polled at 60Hz and the default ftdi latency
   seriously affects turn-around time and results in missed data frames. We
   have created a modprobe option that allows this setting to be increased.
   This has proven necessary particularly in some virtualized environments.

Signed-off-by: Martin P. Geleynse <mgeleyns@ndigital.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-12 15:16:39 -07:00
..
atm firmware: atm/ueagle-atm: prepare for FIRMWARE_NAME_MAX removal 2009-06-15 21:30:24 -07:00
c67x00 usb/c67x00 endianness annotations 2008-06-04 08:06:01 -07:00
class USB: cdc-acm: work around some broken devices 2009-07-12 15:16:37 -07:00
core Revert USB: usbfs: deprecate and hide option for !embedded 2009-07-12 15:16:39 -07:00
gadget USB: RNDIS gadget, fix issues talking from PXA 2009-07-12 15:16:39 -07:00
host USB: EHCI: check for STALL before other errors 2009-07-12 15:16:39 -07:00
image USB: replace uses of __constant_{endian} 2009-03-24 16:20:33 -07:00
misc Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 2009-06-16 13:06:10 -07:00
mon Fix virt_to_phys() warnings 2009-07-06 13:57:03 -07:00
musb USB: musb: silence "suspend as a_wait_vrise is_active" msgs 2009-07-12 15:16:37 -07:00
otg Revert "USB: Add Intel Langwell USB OTG Transceiver Drive" 2009-07-12 15:16:36 -07:00
serial USB: ftdi: support NDI devices 2009-07-12 15:16:39 -07:00
storage USB: usb-storage: add filter to "option_ms" to leave unrecognized devices alone 2009-06-15 21:44:46 -07:00
wusbcore WUSB: correct format of wusb_chid sysfs file 2009-04-17 10:50:29 -07:00
Kconfig usb: return device strings in UTF-8 2009-06-15 21:44:43 -07:00
Makefile USB: xhci: Add Makefile, MAINTAINERS, and Kconfig entries. 2009-06-15 21:44:51 -07:00
README
usb-skeleton.c USB: skeleton: Use dev_info instead of info 2009-03-24 16:20:30 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.