Tero Kristo dccaad8950 OMAP3: PM: Force write last pad config register into save area ...

Due to OMAP3 erratas 1.157, 1.185 the save of the last pad register
(ETK_D14 and ETK_D15) can fail sometimes when there is simultaneous
OCP access to the SCM register area. Fixed by writing the last
register to the save area.

Also, optimized the delay loop for the HW save to include an udelay(1),
which limits the number of unnecessary HW accesses to SCM register area
during the save.

Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Acked-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

2010-01-20 18:16:07 -08:00

..

include/mach

omap3: zoom: rename zoom2 name to generic zoom

2009-11-22 10:24:33 -08:00

board-2430sdp.c

mfd: Rename twl4030* driver files to enable re-use

2009-12-13 20:05:51 +01:00

board-3430sdp.c

mfd: Rename twl4030* driver files to enable re-use

2009-12-13 20:05:51 +01:00

board-3630sdp.c

omap: mux: Add 36xx CBP package support

2009-12-11 16:16:33 -08:00

board-4430sdp.c

Merge branch '7xx-iosplit-plat' with omap-fixes

2009-11-10 18:10:34 -08:00

board-am3517evm.c

omap: mux: Add new style init functions to omap3 board-*.c files

2009-12-11 16:16:32 -08:00

board-apollon.c

omap: use smc91x_platdata to setup smc91x

2009-12-11 16:16:33 -08:00

board-cm-t35.c

mfd: twl: fix twl4030 rename for remaining driver, board files

2009-12-16 12:44:04 -08:00

board-generic.c

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

board-h4.c

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

board-igep0020.c

mfd: twl: fix twl4030 rename for remaining driver, board files

2009-12-16 12:44:04 -08:00

board-ldp.c

mfd: Rename twl4030* driver files to enable re-use

2009-12-13 20:05:51 +01:00

board-n8x0.c

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

board-omap3beagle.c

mfd: Rename twl4030* driver files to enable re-use

2009-12-13 20:05:51 +01:00

board-omap3evm.c

mfd: twl: fix twl4030 rename for remaining driver, board files

2009-12-16 12:44:04 -08:00

board-omap3pandora.c

mfd: Rename twl4030* driver files to enable re-use

2009-12-13 20:05:51 +01:00

board-omap3touchbook.c

mfd: twl: fix twl4030 rename for remaining driver, board files

2009-12-16 12:44:04 -08:00

board-overo.c

mfd: Rename twl4030* driver files to enable re-use

2009-12-13 20:05:51 +01:00

board-rx51-peripherals.c

mfd: twl: fix twl4030 rename for remaining driver, board files

2009-12-16 12:44:04 -08:00

board-rx51-sdram.c

omap3: rx51: Add SDRAM init

2009-11-22 10:24:33 -08:00

board-rx51.c

omap: mux: Remove old mux code for 34xx

2009-12-11 16:16:33 -08:00

board-zoom2.c

omap: mux: Add new style init functions to omap3 board-*.c files

2009-12-11 16:16:32 -08:00

board-zoom3.c

omap: mux: Add 36xx CBP package support

2009-12-11 16:16:33 -08:00

board-zoom-debugboard.c

omap3: zoom: rename zoom2 name to generic zoom

2009-11-22 10:24:33 -08:00

board-zoom-peripherals.c

omap2/3: ZOOM: Correcting key mapping for few keys

2010-01-08 10:29:07 -08:00

clock2xxx_data.c

OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx*

2009-12-11 16:16:00 -07:00

clock2xxx.c

OMAP2 clock: dynamically allocate CPUFreq frequency table

2010-01-08 15:23:17 -07:00

clock2xxx.h

OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx*

2009-12-11 16:16:00 -07:00

clock34xx_data.c

OMAP3 clock: Add capability to change rate of dpll4_m5_ck

2010-01-08 15:23:08 -07:00

clock34xx.c

OMAP2: remove duplicated #include

2010-01-08 15:23:03 -07:00

clock34xx.h

ARM: OMAP4: PM: Move DPLL control apis to dpll.c

2009-12-11 17:00:46 -07:00

clock44xx_data.c

ARM: OMAP4: PM: Add init api for DPLL nodes

2009-12-11 17:00:47 -07:00

clock44xx.c

ARM: OMAP4: PM: Add support for OMAP4 dpll api's

2009-12-11 17:00:46 -07:00

clock44xx.h

ARM: OMAP4: PM: Move DPLL control apis to dpll.c

2009-12-11 17:00:46 -07:00

clock_common_data.c

OMAP3 clock: convert clock34xx.h to clock34xx_data.c

2009-12-11 16:12:15 -07:00

clock.c

ARM: OMAP4: PM: Add init api for DPLL nodes

2009-12-11 17:00:47 -07:00

clock.h

ARM: OMAP4: PM: Add init api for DPLL nodes

2009-12-11 17:00:47 -07:00

clockdomain.c

ARM: OMAP3: PM: Fix the Invalid CM_CLKSTCTRL reg access.

2010-01-08 15:23:04 -07:00

clockdomains.h

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

cm4xxx.c

omap: Fix 44xx compile

2009-09-24 16:23:07 -07:00

cm44xx.h

ARM: OMAP4: PM: Adds CM1/2 register defs for OMAP4

2009-12-11 17:00:45 -07:00

cm-regbits-24xx.h

[ARM] OMAP2 PRCM: clean up CM_IDLEST bits

2009-02-08 17:50:37 +00:00

cm-regbits-34xx.h

OMAP3: PM: Add D2D clocks and auto-idle setup to PRCM init

2009-05-28 10:59:07 -07:00

cm-regbits-44xx.h

ARM: OMAP4: PM: Adds CM1/2 register field masks

2009-12-11 17:00:45 -07:00

cm.c

OMAP clock/hwmod: fix off-by-one errors

2009-12-11 17:00:43 -07:00

cm.h

ARM: OMAP4: PM: Add dummy hooks for OMAP4 dpll api's

2009-12-11 17:00:46 -07:00

control.c

OMAP3: PM: Program SDRC to send self refresh on timeout of AUTO_CNT

2009-11-11 14:42:28 -08:00

cpuidle34xx.c

OMAP3: CPUidle: Fixed timer resolution

2010-01-20 18:16:02 -08:00

devices.c

omap: mux: Replace omap_cfg_reg() with new style signal or gpio functions

2009-12-11 16:16:32 -08:00

dpll.c

ARM: OMAP4: PM: Add support for OMAP4 dpll api's

2009-12-11 17:00:46 -07:00

emu.c

ARM: 5843/1: OMAP3: add AMBA devices for ETM and ETB

2009-12-02 10:25:23 +00:00

gpmc-onenand.c

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

gpmc-smc91x.c

omap: use smc91x_platdata to setup smc91x

2009-12-11 16:16:33 -08:00

gpmc.c

ARM: OMAP4: PM: Add dummy hooks for OMAP4 dpll api's

2009-12-11 17:00:46 -07:00

i2c.c

omap: Split i2c platform init for mach-omap1 and mach-omap2

2009-12-11 16:16:32 -08:00

id.c

omap3: id code detection 3525 vs 3515

2009-12-11 16:16:37 -08:00

io.c

OMAP2xxx IO mapping: mark DSP mappings as being 2420-only

2010-01-08 15:23:05 -07:00

iommu2.c

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

irq.c

OMAP3: PM: Disable interrupt controller AUTOIDLE before WFI

2010-01-20 18:16:00 -08:00

Kconfig

omap3: EVM: Choose OMAP_PACKAGE_CBB

2010-01-08 10:29:08 -08:00

mailbox.c

omap: mailbox: Adds code changes to support OMAP4 mailbox

2009-11-22 10:24:33 -08:00

Makefile

omap3: Board file of Always Innovating OMAP3-based Touch Book

2009-12-11 16:16:34 -08:00

Makefile.boot

[ARM] 3145/1: OMAP 3a/5: Add support for omap24xx

2005-11-10 14:26:51 +00:00

mcbsp.c

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

mmc-twl4030.c

omap3630: Set omap3630 MMC1 I/O speed to 52Mhz

2009-11-22 10:24:32 -08:00

mmc-twl4030.h

omap_hsmmc: support for deeper power saving states

2009-09-23 07:39:35 -07:00

mux34xx.c

omap: mux: Add 36xx CBP package support

2009-12-11 16:16:33 -08:00

mux34xx.h

omap: mux: Add 36xx CBP package support

2009-12-11 16:16:33 -08:00

mux.c

omap3: Fix booting if package is uninitialized

2010-01-08 10:29:08 -08:00

mux.h

omap: mux: Add 36xx CBP package support

2009-12-11 16:16:33 -08:00

omap3-iommu.c

omap: iommu: reorganize

2009-11-22 10:24:32 -08:00

omap_hwmod_34xx.h

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

omap_hwmod_2420.h

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

omap_hwmod_2430.h

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

omap_hwmod.c

OMAP: hwmod: warn on missing clockdomain

2009-12-11 17:00:44 -07:00

omap-headsmp.S

OMAP4: AuxCoreBoot registers only accessible in secure mode

2009-12-11 16:16:35 -08:00

omap-smp.c

OMAP4: Remove the secondary wait loop

2009-12-11 16:16:35 -08:00

opp2xxx.h

OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx*

2009-12-11 16:16:00 -07:00

opp2420_data.c

OMAP2xxx OPP: clean up comments in OPP data

2010-01-08 15:23:15 -07:00

opp2430_data.c

OMAP2xxx OPP: clean up comments in OPP data

2010-01-08 15:23:15 -07:00

pm24xx.c

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

pm34xx.c

OMAP3: PM: Force write last pad config register into save area

2010-01-20 18:16:07 -08:00

pm-debug.c

OMAP: omap3_pm_get_suspend_state() error ignored in pwrdm_suspend_get()

2010-01-20 18:16:07 -08:00

pm.h

OMAP3: PM debug: fix build error when !CONFIG_DEBUG_FS

2010-01-20 18:16:05 -08:00

powerdomain.c

OMAP3: PM: Fix for MPU power domain MEM BANK position

2009-12-11 17:00:42 -07:00

powerdomains24xx.h

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

powerdomains34xx.h

OMAP3: PM: Fix for MPU power domain MEM BANK position

2009-12-11 17:00:42 -07:00

powerdomains.h

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

prcm-common.h

ARM: OMAP4: PM: Adds PRM register shift and mask bits

2009-12-11 17:00:45 -07:00

prcm.c

OMAP3: PM: Removing redundant and potentially dangerous PRCM configration

2010-01-20 18:16:04 -08:00

prm44xx.h

ARM: OMAP4: PM: Adds PRM register defs for OMAP4

2009-12-11 17:00:45 -07:00

prm-regbits-24xx.h

ARM: OMAP2: Powerdomain: Add OMAP2 powerdomains

2008-08-19 11:08:42 +03:00

prm-regbits-34xx.h

OMAP3: PM: Enable IO-CHAIN wakeup

2009-11-11 14:42:28 -08:00

prm-regbits-44xx.h

ARM: OMAP4: PM: Adds PRM register shift and mask bits

2009-12-11 17:00:45 -07:00

prm.h

ARM: OMAP4: PM: Adds PRM register defs for OMAP4

2009-12-11 17:00:45 -07:00

sdram-hynix-h8mbx00u0mer-0em.h

omap3: zoom: Introduce zoom3 board support

2009-11-22 10:24:33 -08:00

sdram-micron-mt46h32m32lf-6.h

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

sdram-qimonda-hyb18m512160af-6.h

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

sdrc2xxx.c

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

sdrc.c

OMAP2: Add funcs for writing SMS_ROT_* registers

2009-12-09 11:44:32 +02:00

sdrc.h

OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx*

2009-12-11 16:16:00 -07:00

serial.c

omap2/3: make serial_in_override() address the right uart port

2010-01-08 10:29:06 -08:00

sleep24xx.S

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

sleep34xx.S

OMAP3: Fixed ARM aux ctrl register save/restore

2010-01-20 18:16:03 -08:00

sram34xx.S

OMAP3: SDRC: Place SDRC AC timing and MR changes in CORE DVFS SRAM code behind Kconfig

2009-12-11 17:00:42 -07:00

sram242x.S

omap: Split OMAP2_IO_ADDRESS to L3 and L4

2009-10-19 15:25:31 -07:00

sram243x.S

omap: Split OMAP2_IO_ADDRESS to L3 and L4

2009-10-19 15:25:31 -07:00

timer-gp.c

PM debug: allow configurable wakeup from suspend on OMAP GPtimer

2009-11-11 14:42:28 -08:00

timer-mpu.c

ARM: OMAP4: SMP: Add mpu timer support for OMAP4430

2009-06-09 13:03:59 +05:30

usb-ehci.c

omap: mux: Replace omap_cfg_reg() with new style signal or gpio functions

2009-12-11 16:16:32 -08:00

usb-musb.c

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

usb-tusb6010.c

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00