iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm/mach-omap2
History
Tony Lindgren dbf828ec4c ARM: OMAP2+: Drop legacy ads7846 init
2016-11-10 15:46:13 -07:00
..
include/mach
ARM: omap2: restore OMAP4 barrier behaviour
2015-07-25 15:28:16 +01:00
am33xx-restart.c
ARM: OMAP2+: PRM: provide generic API for system reset
2014-10-27 08:39:26 -07:00
am33xx.h
ARM: OMAP2+: AM43x: early init
2013-06-12 08:00:35 -07:00
board-generic.c
ARM: OMAP2+: Set system_rev from ATAGS for n900
2016-02-10 16:17:15 -08:00
board-n8x0.c
ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module
2016-08-26 08:42:35 -07:00
clkt2xxx_dpll.c
…
clkt2xxx_dpllcore.c
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
clkt2xxx_virt_prcm_set.c
ARM: omap2: use clkdev_create()
2015-05-06 11:58:58 +01:00
clock2xxx.h
ARM: OMAP2: clock: remove unused apll code
2015-01-07 10:54:40 -08:00
clock3xxx.h
CLK: TI: add omap3 clock init file
2014-01-17 12:35:48 -08:00
clock.c
clk: ti: omap5+: dpll: implement errata i810
2015-11-30 11:34:17 -08:00
clock.h
clk: ti: move low-level access and init code under clock driver
2015-06-02 12:31:46 +03:00
clockdomain.c
ARM: OMAP2+: clockdomain: add usecounting support to autoidle APIs
2016-07-04 07:15:38 -07:00
clockdomain.h
ARM: OMAP2+: clockdomain: add usecounting support to autoidle APIs
2016-07-04 07:15:38 -07:00
clockdomains2xxx_3xxx_data.c
…
clockdomains3xxx_data.c
ARM: OMAP3: fix iva mmu programming issues
2014-03-12 09:48:26 -07:00
clockdomains7xx_data.c
ARM: DRA7: clockdomain: Implement timer workaround for errata i874
2016-04-10 11:43:57 -06:00
clockdomains33xx_data.c
…
clockdomains43xx_data.c
ARM: OMAP2+: CM: AM43x clockdomain data
2013-10-13 22:48:36 -06:00
clockdomains44xx_data.c
…
clockdomains54xx_data.c
ARM: OMAP5: clockdomain data: Add OMAP54XX data and update the header
2013-06-08 11:56:15 -06:00
clockdomains81xx_data.c
ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx
2015-12-22 16:23:08 -08:00
clockdomains2420_data.c
…
clockdomains2430_data.c
…
cm1_7xx.h
ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions
2014-10-27 08:39:25 -07:00
cm1_44xx.h
ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions
2014-10-27 08:39:25 -07:00
cm1_54xx.h
ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions
2014-10-27 08:39:25 -07:00
cm2_7xx.h
ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions
2014-10-27 08:39:25 -07:00
cm2_44xx.h
ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions
2014-10-27 08:39:25 -07:00
cm2_54xx.h
ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions
2014-10-27 08:39:25 -07:00
cm2xxx_3xxx.h
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
cm2xxx.c
ARM: OMAP2+: CM: move SoC specific init calls within a generic API
2015-03-31 21:26:50 +03:00
cm2xxx.h
ARM: OMAP2+: CM: move SoC specific init calls within a generic API
2015-03-31 21:26:50 +03:00
cm3xxx.c
ARM: OMAP2+: Fix typo in cm3xxx.c
2016-06-10 04:14:37 -07:00
cm3xxx.h
ARM: OMAP2+: CM: move SoC specific init calls within a generic API
2015-03-31 21:26:50 +03:00
cm33xx.c
ARM: OMAP4+: CM: Remove redundant checks for clkctrl_offs of zero
2016-07-22 23:10:57 -07:00
cm33xx.h
ARM: OMAP2+: CM: move SoC specific init calls within a generic API
2015-03-31 21:26:50 +03:00
cm44xx.h
ARM: OMAP2+: CM: move SoC specific init calls within a generic API
2015-03-31 21:26:50 +03:00
cm81xx.h
ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx
2015-12-22 16:23:08 -08:00
cm_common.c
ARM: OMAP2+: clock: add low-level support for regmap
2015-03-31 21:26:55 +03:00
cm-regbits-7xx.h
ARM: OMAP: DRA7: CM: Add minimal regbit shifts
2013-08-23 04:28:36 -06:00
cm-regbits-24xx.h
ARM: OMAP2: convert sys_ck and osc_ck to standard clock types
2014-07-02 14:26:06 +03:00
cm-regbits-33xx.h
ARM: OMAP3: PRM/CM: Cleanup unused header
2013-07-21 22:10:03 -06:00
cm-regbits-34xx.h
ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver
2014-07-06 15:51:23 -06:00
cm-regbits-44xx.h
ARM: OMAP4: PRM/CM: Cleanup unused header
2013-07-21 22:10:14 -06:00
cm-regbits-54xx.h
ARM: OMAP5: PRM/CM: Cleanup unused header
2013-07-21 22:10:25 -06:00
cm.h
ARM: OMAP2+: CM: determine CM base address from device tree
2015-03-27 10:55:57 +02:00
cminst44xx.c
ARM: OMAP4+: CM: Remove redundant checks for clkctrl_offs of zero
2016-07-22 23:10:57 -07:00
common-board-devices.h
ARM: OMAP2+: Drop legacy ads7846 init
2016-11-10 15:46:13 -07:00
common.c
Revert "ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688"
2015-07-25 15:28:14 +01:00
common.h
ARM: OMAP2+: Remove legacy mux code
2016-11-10 12:42:49 -07:00
control.c
ARM: OMAP2+: Fix out of range register access with syscon_config.max_register
2016-02-22 09:22:38 -08:00
control.h
ARM: OMAP3: Add support for configuring MMC pins as GPIO pins
2015-05-20 09:23:43 -07:00
cpuidle34xx.c
ARM: OMAP3: Add cpuidle parameters table for omap3430
2016-02-19 10:35:39 -08:00
cpuidle44xx.c
ARM: OMAP2+: clockdomain: add usecounting support to autoidle APIs
2016-07-04 07:15:38 -07:00
ctrl_module_wkup_44xx.h
…
devices.c
ARM: OMAP2+: Remove legacy hwmod mux code
2016-11-10 12:42:38 -07:00
display.c
ARM: OMAP2: Use the platform_data header for omapdss
2016-06-03 16:01:01 +03:00
display.h
ARM/video: omap2: Move omap_display_init declaration to mach-omap2/display.h
2016-06-03 16:00:31 +03:00
dma.c
ARM: OMAP2+: DMA: Provide dma_slave_map to omap-dma for legacy boot
2016-02-22 10:00:50 -08:00
drm.c
ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module
2016-08-26 08:42:35 -07:00
fb.c
ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module
2016-08-26 08:42:35 -07:00
gpio.c
…
gpmc-nand.c
mtd: nand: omap: Clean up device tree support
2016-04-15 11:53:36 +03:00
gpmc-onenand.c
ARM: OMAP2+: Fix onenand initialization to avoid filesystem corruption
2016-02-22 09:24:10 -08:00
gpmc.h
ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header
2014-11-20 12:11:25 -08:00
hdq1w.c
arm: mach-omap2: Convert pr_warning to pr_warn
2014-09-18 09:53:57 -07:00
hdq1w.h
…
hsmmc.c
ARM: OMAP2+: Remove legacy mux code
2016-11-10 12:42:49 -07:00
hsmmc.h
ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module
2016-08-26 08:42:35 -07:00
i2c.c
ARM: OMAP2+: Remove legacy i2c.c platform init code
2016-11-10 08:53:30 -07:00
i2c.h
…
id.c
Revert "ARM: OMAP: Catch callers of revision information prior to it being populated"
2016-04-19 08:01:05 -07:00
id.h
…
io.c
ARM: OMAP2+: Remove legacy mux code
2016-11-10 12:42:49 -07:00
iomap.h
ARM: DRA7: Provide proper IO map table
2015-07-16 00:06:05 -07:00
Kconfig
Remove the last two legacy board-*.c files for omap3 for legacy
2016-09-02 18:30:29 +02:00
l3_2xxx.h
…
l3_3xxx.h
…
l4_2xxx.h
…
l4_3xxx.h
…
Makefile
ARM: OMAP2+: Drop legacy ads7846 init
2016-11-10 15:46:13 -07:00
mcbsp.c
ARM: OMAP2+: McBSP: Remove the old iclk allow/deny idle code
2016-06-10 05:07:25 -07:00
mmc.h
ARM: OMAP2: MMC: include mmc-omap platform header directly
2014-11-26 14:30:53 +01:00
msdi.c
ARM: OMAP2+: Remove legacy mux code
2016-11-10 12:42:49 -07:00
omap2-restart.c
ARM: OMAP2+: Change core_initcall levels to postcore_initcall
2015-12-03 11:38:09 -08:00
omap3-restart.c
ARM: OMAP2+: sparse: add missing function declarations
2015-07-15 23:43:41 -06:00
omap4-common.c
ARM: OMAP4+: Initialize SAR RAM base early for proper CPU1 reset for kexec
2016-06-22 22:55:47 -07:00
omap4-restart.c
ARM: OMAP2+: sparse: add missing function declarations
2015-07-15 23:43:41 -06:00
omap4-sar-layout.h
ARM: arm-soc cleanup for 3.10
2013-05-02 09:03:55 -07:00
omap24xx.h
…
omap34xx.h
[media] omap3isp: Replace many MMIO regions by two
2015-04-02 16:45:07 -03:00
omap44xx.h
…
omap54xx.h
ARM: DRA7: Provide proper IO map table
2015-07-16 00:06:05 -07:00
omap_device.c
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
2016-08-03 07:26:11 -04:00
omap_device.h
ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected
2013-12-10 09:39:52 -08:00
omap_hwmod_2xxx_3xxx_interconnect_data.c
ARM: OMAP2+: Remove legacy data from hwmod for omap3
2016-11-10 14:03:19 -07:00
omap_hwmod_2xxx_3xxx_ipblock_data.c
ARM: OMAP2+: Remove legacy data from hwmod for omap3
2016-11-10 14:03:19 -07:00
omap_hwmod_2xxx_interconnect_data.c
ARM: OMAP2+: Remove legacy data from hwmod for omap3
2016-11-10 14:03:19 -07:00
omap_hwmod_2xxx_ipblock_data.c
ARM: OMAP2+: Remove legacy data from hwmod for omap3
2016-11-10 14:03:19 -07:00
omap_hwmod_3xxx_data.c
ARM: OMAP2+: Remove legacy data from hwmod for omap3
2016-11-10 14:03:19 -07:00
omap_hwmod_7xx_data.c
ARM: DRA7: hwmod: remove DSS addresses from hwmod
2016-06-10 05:10:52 -07:00
omap_hwmod_33xx_43xx_common_data.h
ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries
2016-06-10 05:02:34 -07:00
omap_hwmod_33xx_43xx_interconnect_data.c
ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries
2016-06-10 05:02:34 -07:00
omap_hwmod_33xx_43xx_ipblock_data.c
ARM: OMAP2+: AM33XX: Add HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET flag to rtc hwmod
2016-07-22 23:09:42 -07:00
omap_hwmod_33xx_data.c
ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries
2016-06-10 05:02:34 -07:00
omap_hwmod_43xx_data.c
ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries
2016-06-10 05:02:34 -07:00
omap_hwmod_44xx_data.c
ARM: omap4: hwmod: Remove elm address space from hwmod data
2015-11-30 13:18:37 -08:00
omap_hwmod_54xx_data.c
ARM: OMAP: Remove duplicated operand in OR operation
2015-10-20 01:29:40 -06:00
omap_hwmod_81xx_data.c
ARM: OMAP: make ti81xx_rtc_hwmod static
2016-06-22 03:05:18 -07:00
omap_hwmod_2420_data.c
ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs
2014-07-15 05:08:56 -07:00
omap_hwmod_2430_data.c
ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driver
2014-11-26 14:30:53 +01:00
omap_hwmod_common_data.c
…
omap_hwmod_common_data.h
ARM: OMAP2+: Remove legacy data from hwmod for omap3
2016-11-10 14:03:19 -07:00
omap_hwmod_common_ipblock_data.c
ARM: AM43xx: hwmod: add DSS hwmod data
2014-07-05 17:44:57 -06:00
omap_hwmod_reset.c
ARM: OMAP2+: hwmod: RTC: Add lock and unlock functions
2016-04-10 13:20:10 -06:00
omap_hwmod.c
ARM: OMAP2+: Remove legacy hwmod mux code
2016-11-10 12:42:38 -07:00
omap_hwmod.h
ARM: OMAP4+: hwmod: Add hwmod flag for HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET
2016-07-22 23:08:58 -07:00
omap_opp_data.h
…
omap_phy_internal.c
ARM: OMAP2+: Remove unused ti81xx platform init code
2015-01-14 17:21:00 -08:00
omap_twl.c
mfd: twl-core: Fix idle mode signaling for omaps when booted with device tree
2014-04-23 15:31:05 +01:00
omap-headsmp.S
ARM: OMAP2+: Fix build if CONFIG_SMP is not set
2016-06-27 23:30:02 -07:00
omap-hotplug.c
ARM: OMAP4+: Allow kexec on SMP variants
2016-06-22 22:57:02 -07:00
omap-mpuss-lowpower.c
ARM: OMAP2+: Fix build with CONFIG_SMP and CONFIG_PM is not set
2016-07-03 23:29:45 -07:00
omap-pm-noop.c
ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions
2015-01-07 09:53:51 -08:00
omap-pm.h
ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions
2015-01-07 09:53:51 -08:00
omap-secure.c
RX-51: Add support for OMAP3 ROM Random Number Generator
2013-10-08 12:02:12 -07:00
omap-secure.h
ARM: OMAP5 / DRA7: Introduce workaround for 801819
2016-05-12 10:14:54 -07:00
omap-smc.S
ARM: OMAP3: Add secure function omap_smc3() which calling instruction smc #1
2013-10-08 11:55:32 -07:00
omap-smp.c
ARM: OMAP2+: clockdomain: add usecounting support to autoidle APIs
2016-07-04 07:15:38 -07:00
omap-wakeupgen.c
ARM/OMAP/wakeupgen: Convert to hotplug state machine
2016-09-19 21:44:26 +02:00
omap-wakeupgen.h
ARM: omap: convert wakeupgen to stacked domains
2015-03-15 00:56:13 +00:00
opp2xxx.h
…
opp3xxx_data.c
…
opp4xxx_data.c
…
opp2420_data.c
…
opp2430_data.c
ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency
2015-05-14 16:22:05 +01:00
opp.c
ACPI and power management updates for 3.13-rc1
2013-11-14 13:41:48 +09:00
pdata-quirks.c
ARM: OMAP2+: Drop legacy ads7846 init
2016-11-10 15:46:13 -07:00
pm24xx.c
ARM: OMAP2+: Include clk.h
2015-07-20 10:52:36 -07:00
pm34xx.c
ARM: OMAP3: Fix external abort on 36xx waking from off mode idle
2016-04-14 08:27:30 -07:00
pm44xx.c
ARM: OMAP2+: Remove unneeded semicolons
2015-10-12 10:56:36 -07:00
pm-debug.c
Merge branch 'cleanup' into for-linus
2013-05-02 21:31:29 +01:00
pm.c
ARM: OMAP2+: Remove legacy PM init
2016-11-10 09:01:33 -07:00
pm.h
ARM: OMAP4+: PM: erratum is used by OMAP5 and DRA7 as well
2015-09-14 12:14:47 -07:00
pmu.c
ARM: OMAP2+: Remove calls to deprecacted marco,PTR_RET in the files,fb.c and pmu.c
2015-05-20 10:43:37 -07:00
powerdomain-common.c
ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files
2014-05-15 22:35:10 -06:00
powerdomain.c
ARM: SoC platform updates for v4.8
2016-08-01 18:27:08 -04:00
powerdomain.h
ARM: OMAP2+: powerdomain.c: Remove some unused functions
2015-01-07 09:53:51 -08:00
powerdomains2xxx_3xxx_data.c
…
powerdomains2xxx_3xxx_data.h
…
powerdomains2xxx_data.c
…
powerdomains3xxx_data.c
ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx
2015-12-22 16:23:08 -08:00
powerdomains7xx_data.c
ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_mem_ret
2016-06-13 01:04:01 -07:00
powerdomains33xx_data.c
…
powerdomains43xx_data.c
ARM: OMAP2+: PM: AM43x powerdomain data
2013-10-13 22:48:25 -06:00
powerdomains44xx_data.c
…
powerdomains54xx_data.c
ARM: OMAP5: powerdomain data: fix powerdomain powerstate
2014-09-08 11:22:40 -05:00
prcm43xx.h
ARM: AM43XX: hwmod: Fix RSTST register offset for pruss
2016-06-22 02:55:44 -07:00
prcm44xx.h
ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters
2013-08-23 04:28:36 -06:00
prcm_mpu7xx.h
ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters
2013-08-23 04:28:36 -06:00
prcm_mpu44xx.c
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
prcm_mpu44xx.h
ARM: OMAP2+: PRCM: cleanup some header includes
2014-05-15 22:34:48 -06:00
prcm_mpu54xx.h
ARM: OMAP5: PRCM: Add OMAP54XX local MPU PRCM registers
2013-06-08 11:55:18 -06:00
prcm_mpu_44xx_54xx.h
ARM: OMAP4+: PRCM MPU: Move function prototypes to common header for re-use
2013-06-08 11:54:40 -06:00
prcm-common.h
Merge branch 'dm814x-soc' into omap-for-v4.3/soc
2015-07-23 21:59:18 -07:00
prm2xxx_3xxx.c
ARM: OMAP2+: PRM: add generic API for checking hardreset status
2014-10-27 08:39:25 -07:00
prm2xxx_3xxx.h
ARM: OMAP2+: PRM: add generic API for checking hardreset status
2014-10-27 08:39:25 -07:00
prm2xxx.c
ARM: OMAP2+: PRM: move SoC specific init calls within a generic API
2015-03-31 21:26:36 +03:00
prm2xxx.h
ARM: OMAP2+: PRM: move SoC specific init calls within a generic API
2015-03-31 21:26:36 +03:00
prm3xxx.c
ARM: OMAP2+: PRM: move SoC specific init calls within a generic API
2015-03-31 21:26:36 +03:00
prm3xxx.h
ARM: OMAP2+: PRM: move SoC specific init calls within a generic API
2015-03-31 21:26:36 +03:00
prm7xx.h
ARM: DRA7: hwmod: Add reset data for PCIe
2016-02-09 02:18:52 -07:00
prm33xx.c
ARM: OMAP2+: PRM: move SoC specific init calls within a generic API
2015-03-31 21:26:36 +03:00
prm33xx.h
ARM: dts: am43xx: Remove wrongly defined RSTST offset for PER Domain
2016-06-22 03:33:25 -07:00
prm44xx_54xx.h
ARM: OMAP2+: PRM: move SoC specific init calls within a generic API
2015-03-31 21:26:36 +03:00
prm44xx.c
ARM: OMAP4+: PRM: Add AM437x specific data
2015-07-23 06:08:24 -06:00
prm44xx.h
ARM: OMAP2+: PRM: move SoC specific init calls within a generic API
2015-03-31 21:26:36 +03:00
prm54xx.h
ARM: OMAP2+: PRM: move SoC specific init calls within a generic API
2015-03-31 21:26:36 +03:00
prm_common.c
ARM: OMAP2+: Fix randconfig build warning for dm814_pllss_data
2015-12-22 17:01:02 -08:00
prm-regbits-24xx.h
ARM: OMAP2: PRM/CM: Cleanup unused header
2013-07-21 21:13:59 -06:00
prm-regbits-33xx.h
ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK
2013-08-29 19:10:59 -07:00
prm-regbits-34xx.h
ARM: OMAP2+: Fix omap off idle power consumption creeping up
2015-05-04 08:54:41 -07:00
prm-regbits-44xx.h
ARM: OMAP2+: Fix omap off idle power consumption creeping up
2015-05-04 08:54:41 -07:00
prm.h
ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init
2015-03-31 21:26:53 +03:00
prminst44xx.c
ARM: OMAP4+: PRM: add support for passing status register/bit info to reset
2015-05-08 13:05:15 -06:00
prminst44xx.h
ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility
2015-03-31 21:26:44 +03:00
scrm44xx.h
…
scrm54xx.h
ARM: OMAP5: SCRM: Add OMAP54XX header file.
2013-06-08 11:55:44 -06:00
sdram-hynix-h8mbx00u0mer-0em.h
…
sdram-micron-mt46h32m32lf-6.h
…
sdram-nokia.c
…
sdram-nokia.h
…
sdram-numonyx-m65kxxxxam.h
…
sdram-qimonda-hyb18m512160af-6.h
…
sdrc2xxx.c
ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency
2015-05-14 16:22:05 +01:00
sdrc.c
…
sdrc.h
ARM: OMAP2+: Fix typo in sdrc.h
2016-06-10 04:17:07 -07:00
serial.h
…
sleep24xx.S
…
sleep34xx.S
ARM: OMAP2+: Fix l2_inv_api_params for rodata
2016-01-22 08:26:08 -08:00
sleep44xx.S
ARM: OMAP2+: Fix ppa_zero_params and ppa_por_params for rodata
2016-01-22 08:26:08 -08:00
smartreflex-class3.c
arm: mach-omap2: Convert pr_warning to pr_warn
2014-09-18 09:53:57 -07:00
soc.h
ARM: SoC platform updates for v4.7
2016-05-18 12:35:46 -07:00
sr_device.c
arm: mach-omap2: Convert pr_warning to pr_warn
2014-09-18 09:53:57 -07:00
sram242x.S
ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency
2015-05-14 16:22:05 +01:00
sram243x.S
ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency
2015-05-14 16:22:05 +01:00
sram.c
ARM: OMAP3: clock: remove un-used core dpll re-program code
2015-10-14 12:35:27 -07:00
sram.h
ARM: OMAP3: clock: remove un-used core dpll re-program code
2015-10-14 12:35:27 -07:00
ti81xx-restart.c
ARM: OMAP2+: Fix reboot for 81xx
2015-01-14 17:37:16 -08:00
ti81xx.h
…
timer.c
ARM: SoC platform updates for v4.8
2016-08-01 18:27:08 -04:00
usb-tusb6010.c
ARM: OMAP2+: Remove legacy muxing for usb-tusb6010.c
2016-11-10 12:42:15 -07:00
usb.h
ARM: OMAP2+: Remove unused ti81xx platform init code
2015-01-14 17:21:00 -08:00
vc3xxx_data.c
ARM: OMAP2+: Fix omap off idle power consumption creeping up
2015-05-04 08:54:41 -07:00
vc44xx_data.c
ARM: OMAP2+: Fix omap off idle power consumption creeping up
2015-05-04 08:54:41 -07:00
vc.c
ARM: OMAP3: vc: Remove unused macros
2015-10-12 10:56:36 -07:00
vc.h
ARM: OMAP2+: Fix omap off idle power consumption creeping up
2015-05-04 08:54:41 -07:00
voltage.c
ARM: OMAP2+: voltage: Remove some unused functions
2015-01-07 09:53:51 -08:00
voltage.h
ARM: OMAP2+: voltage: Remove some unused functions
2015-01-07 09:53:51 -08:00
voltagedomains2xxx_data.c
…
voltagedomains3xxx_data.c
ARM: appropriate __init annotation for const data
2015-07-28 13:55:27 +02:00
voltagedomains44xx_data.c
ARM: appropriate __init annotation for const data
2015-07-28 13:55:27 +02:00
voltagedomains54xx_data.c
ARM: appropriate __init annotation for const data
2015-07-28 13:55:27 +02:00
vp3xxx_data.c
ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone
2015-03-25 11:03:39 +02:00
vp44xx_data.c
ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone
2015-03-25 11:03:39 +02:00
vp.c
…
vp.h
ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone
2015-03-25 11:03:39 +02:00
wd_timer.c
arm: mach-omap2: Convert pr_warning to pr_warn
2014-09-18 09:53:57 -07:00
wd_timer.h
…