iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm64/boot/dts/freescale
History
Adam Ford e353b32594 arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2 
LDO1 and LDO2 settings are wrong and case the voltage to go above the
maximum level of 2.15V permitted by the SoC to 3.0V.

This patch is based on work done on the i.MX8M Mini-EVK which utilizes
the same fix.

Fixes: 593816fa2f35 ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-06-18 22:35:02 +08:00
..
fsl-ls208xa-qds.dtsi
arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller
2018-12-16 16:24:01 +08:00
fsl-ls208xa-rdb.dtsi
arm64: dts: ls208xa: Update qspi node properties for LS2088ARDB
2020-01-09 15:32:29 +08:00
fsl-ls208xa.dtsi
arm64: dts: layerscape: add iommu-map property to pci nodes
2020-03-11 16:15:48 +08:00
fsl-ls1012a-frdm.dts
arm64: dts: ls1012a: Add QSPI node properties
2020-04-25 09:16:06 +08:00
fsl-ls1012a-frwy.dts
arm64: dts: ls1012a: Add QSPI node properties
2020-04-25 09:16:06 +08:00
fsl-ls1012a-oxalis.dts
arm64: dts: freescale: Enable PCI-E controller for Oxalis board
2019-03-20 20:58:26 +08:00
fsl-ls1012a-qds.dts
arm64: dts: ls1012a: Add QSPI node properties
2020-04-25 09:16:06 +08:00
fsl-ls1012a-rdb.dts
arm64: dts: ls1012a: Add QSPI node properties
2020-04-25 09:16:06 +08:00
fsl-ls1012a.dtsi
arm64: dts: ls1012a: Add QSPI node properties
2020-04-25 09:16:06 +08:00
fsl-ls1028a-kontron-kbox-a-230-ls.dts
arm64: dts: ls1028a: disable the felix switch by default
2020-03-16 16:16:00 +08:00
fsl-ls1028a-kontron-sl28-var2.dts
arm64: dts: ls1028a: sl28: keep switch port names consistent
2020-05-20 22:58:15 +08:00
fsl-ls1028a-kontron-sl28-var3-ads2.dts
arm64: dts: ls1028a: sl28: fix on-board EEPROMS
2020-03-16 16:16:00 +08:00
fsl-ls1028a-kontron-sl28-var4.dts
arm64: dts: ls1028: sl28: explicitly enable network ports
2020-03-11 15:58:13 +08:00
fsl-ls1028a-kontron-sl28.dts
arm64: dts: freescale: sl28: enable LPUART1
2020-05-20 09:12:45 +08:00
fsl-ls1028a-qds.dts
arm64: dts: ls1028a: disable all enetc ports by default
2020-03-11 15:58:13 +08:00
fsl-ls1028a-rdb.dts
arm64: dts: ls1028a: disable the felix switch by default
2020-03-16 16:16:00 +08:00
fsl-ls1028a.dtsi
ARM: DT changes for v5.8
2020-06-04 20:02:14 -07:00
fsl-ls1043-post.dtsi
arm64: dts: ls1043a: FMan erratum A050385
2020-03-06 21:55:32 -08:00
fsl-ls1043a-qds.dts
arm64: dts: fsl: use a generic node name for m25p80 flashes
2019-01-11 17:13:04 +08:00
fsl-ls1043a-rdb.dts
arm64: dts: Add ds26522 node to dts to ls1043ardb
2020-05-20 23:00:47 +08:00
fsl-ls1043a.dtsi
arm64: dts: add qe node to ls1043ardb
2020-05-20 23:00:27 +08:00
fsl-ls1046-post.dtsi
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
fsl-ls1046a-frwy.dts
arm64: dts: ls1046a: Add QSPI node for ls1046afrwy
2019-12-11 11:13:37 +08:00
fsl-ls1046a-qds.dts
arm64: dts: fsl: use a generic node name for m25p80 flashes
2019-01-11 17:13:04 +08:00
fsl-ls1046a-rdb.dts
arm64: dts: ls1046ardb: set RGMII interfaces to RGMII_ID mode
2020-03-16 14:58:33 -07:00
fsl-ls1046a.dtsi
arm64: dts: fsl: Remove num-lanes property from PCIe nodes
2019-08-22 18:25:55 +01:00
fsl-ls1088a-qds.dts
arm64: dts: ls1088a: Add QSPI support for NXP LS1088
2019-12-11 11:13:44 +08:00
fsl-ls1088a-rdb.dts
arm64: dts: ls1088a: support eMMC HS200 speed mode for RDB board
2020-02-14 11:39:40 +08:00
fsl-ls1088a.dtsi
arm64: dts: layerscape: add iommu-map property to pci nodes
2020-03-11 16:15:48 +08:00
fsl-ls2080a-qds.dts
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
fsl-ls2080a-rdb.dts
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
fsl-ls2080a-simu.dts
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
fsl-ls2080a.dtsi
arm64: dts: freescale: Add missing cooling device properties for CPUs
2018-07-03 15:01:09 +08:00
fsl-ls2088a-qds.dts
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
fsl-ls2088a-rdb.dts
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
fsl-ls2088a.dtsi
arm64: dts: layerscape: removed compatible string "snps,dw-pcie"
2018-12-08 10:28:38 +08:00
fsl-lx2160a-cex7.dtsi
arm64: dts: lx2160a-cex7: add on-module eeproms
2020-03-11 15:58:13 +08:00
fsl-lx2160a-clearfog-cx.dts
arm64: dts: lx2160a: add dts for CEX7 platforms
2019-12-23 11:36:36 +08:00
fsl-lx2160a-clearfog-itx.dtsi
arm64: dts: lx2160a: add dts for CEX7 platforms
2019-12-23 11:36:36 +08:00
fsl-lx2160a-honeycomb.dts
arm64: dts: lx2160a: add dts for CEX7 platforms
2019-12-23 11:36:36 +08:00
fsl-lx2160a-qds.dts
arm64: dts: lx2160aqds: Add FSPI node properties
2020-03-11 16:34:29 +08:00
fsl-lx2160a-rdb.dts
arm64: dts: lx2160ardb: Update FSPI node properties
2020-03-11 16:34:11 +08:00
fsl-lx2160a.dtsi
arm64: dts: lx2160a: add more thermal zone support
2020-04-29 10:56:43 +08:00
imx8mm-beacon-baseboard.dtsi
arm64: dts: imx: Add Beacon i.MX8m-Mini development kit
2020-04-23 22:20:17 +08:00
imx8mm-beacon-kit.dts
arm64: dts: imx: Add Beacon i.MX8m-Mini development kit
2020-04-23 22:20:17 +08:00
imx8mm-beacon-som.dtsi
arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2
2020-06-18 22:35:02 +08:00
imx8mm-evk.dts
arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range
2020-06-18 15:34:50 +08:00
imx8mm-pinfunc.h
arm64: dts: imx8mm: Add missing mux options for UART1 and UART2 signals
2019-12-23 11:41:38 +08:00
imx8mm.dtsi
ARM: DT changes for v5.8
2020-06-04 20:02:14 -07:00
imx8mn-ddr4-evk.dts
arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range
2020-06-18 15:34:55 +08:00
imx8mn-evk.dts
arm64: dts: imx8mn: Add LPDDR4 EVK board support
2019-10-28 21:48:04 +08:00
imx8mn-evk.dtsi
arm64: dts: imx8mn-evk: Enable pca6416 on i2c3 bus
2020-03-11 16:05:39 +08:00
imx8mn-pinfunc.h
dt-bindings: imx: Add pinctrl binding doc for i.MX8MN
2019-06-25 10:39:39 +02:00
imx8mn.dtsi
ARM: DT changes for v5.8
2020-06-04 20:02:14 -07:00
imx8mp-evk.dts
arm64: dts: imx8mp-evk: Enable pca6416 on i2c3 bus
2020-03-11 16:07:17 +08:00
imx8mp-pinfunc.h
arm64: dts: freescale: imx8mp: update input_val for AUDIOMIX_BIT_STREAM
2020-04-29 11:30:32 +08:00
imx8mp.dtsi
ARM: DT changes for v5.8
2020-06-04 20:02:14 -07:00
imx8mq-evk.dts
arm64: dts: imx8mq-evk: add phy-reset-gpios for fec1
2020-02-24 09:37:19 +08:00
imx8mq-hummingboard-pulse.dts
arm64: dts: imx8mq-hummingboard-pulse: add eeprom description
2020-01-09 17:14:46 +08:00
imx8mq-librem5-devkit.dts
arm64: dts: imx8mq-librem5-devkit: Don't use underscore in node name
2020-04-23 09:17:35 +08:00
imx8mq-nitrogen.dts
arm64: dts: imx8mq: Move usdhc clocks assignment to board DT
2019-10-28 21:48:03 +08:00
imx8mq-phanbell.dts
arm64: dts: imx8mq-phanbell: Fix Ethernet PHY post-reset duration
2020-03-11 17:12:32 +08:00
imx8mq-pico-pi.dts
arm64: dts: imx8mq: Move usdhc clocks assignment to board DT
2019-10-28 21:48:03 +08:00
imx8mq-pinfunc.h
arm64: add basic DTS for i.MX8MQ
2018-12-16 17:28:01 +08:00
imx8mq-sr-som.dtsi
arm64: dts: imx8mq-sr-som: add eeprom description
2020-01-09 17:14:32 +08:00
imx8mq-thor96.dts
arm64: dts: freescale: Add devicetree support for Thor96 board
2020-01-09 14:40:55 +08:00
imx8mq-zii-ultra-rmb3.dts
arm64: dts: zii-ultra: adjust board names
2019-12-09 15:27:18 +08:00
imx8mq-zii-ultra-zest.dts
arm64: dts: zii-ultra: adjust board names
2019-12-09 15:27:18 +08:00
imx8mq-zii-ultra.dtsi
ARM: Device-tree updates
2019-12-05 12:09:47 -08:00
imx8mq.dtsi
ARM: DT changes for v5.8
2020-06-04 20:02:14 -07:00
imx8qxp-ai_ml.dts
arm64: dts: imx8qxp: Move usdhc clocks assignment to board DT
2019-10-28 21:48:03 +08:00
imx8qxp-colibri-eval-v3.dts
arm64: dts: freescale: add initial support for colibri imx8x
2019-11-04 09:28:07 +08:00
imx8qxp-colibri-eval-v3.dtsi
arm64: dts: freescale: add initial support for colibri imx8x
2019-11-04 09:28:07 +08:00
imx8qxp-colibri.dtsi
arm64: dts: freescale: add initial support for colibri imx8x
2019-11-04 09:28:07 +08:00
imx8qxp-mek.dts
arm64: dts: imx8qxp-mek: Do not use underscore in node name
2020-05-13 16:56:45 +08:00
imx8qxp.dtsi
arm64: dts: imx8qxp: support scu mailbox channel
2020-04-28 16:50:00 +08:00
Makefile
arm64: dts: ls1028a: sl28: add support for variant 2
2020-03-16 16:16:00 +08:00
qoriq-bman-portals.dtsi
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-0.dtsi
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-1.dtsi
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-2.dtsi
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-3.dtsi
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-4.dtsi
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-5.dtsi
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
qoriq-fman3-0-10g-0.dtsi
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
qoriq-fman3-0-10g-1.dtsi
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
qoriq-fman3-0.dtsi
arm64: dts: fsl: add fsl,extts-fifo property for fman ptp
2020-04-29 11:44:43 +08:00
qoriq-qman-portals.dtsi
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
s32v234-evb.dts
arm64: dts: fsl: Add device tree for S32V234-EVB
2019-10-28 21:48:03 +08:00
s32v234.dtsi
arm64: dts: freescale: s32v234: use generic name bus
2020-02-13 11:25:25 +08:00